sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
35,240 Commits 1 Branch 0 Tags 291 MiB
6c484847d5
Commit Graph

35240 Commits

This Branch
This Branch
All Branches
Author SHA1 Message Date
Xiang Xiao
6c484847d5 net/: Decouple autoconfig and icmpv6 socket to avoid the invalid kconfig combination. 2019-09-20 12:45:05 -06:00
Gregory Nutt
6d557386f5 boards/xtensa/esp32/esp32-core/src/Makefile: Fix another problem from the big reorganization noted in Issue 168. 2019-09-20 11:57:36 -06:00
David Alessio
500739de3a Merged in david_alessio/nuttx/bugfix/gitrev-portability (pull request #1035) 
fix portability issue with date, hostname

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2019-09-20 16:46:04 +00:00
Gregory Nutt
23e1d2e403 Dispatch ICMP_POLL to device's callback list too since icmpv6_neighbor still append the callback into this list. 2019-09-20 07:54:10 -06:00
Gregory Nutt
f4cc21a5c3 boards/arm/stm32/stm32f429i-disco/README.txt: Trivial update to README. 2019-09-20 06:23:48 -06:00
Juha Niskanen
5c853cd1dc libs/libc/unistd/lib_getcwd.c: remove stray sched_unlock(). Also fixes several typos. 2019-09-20 06:23:48 -06:00
anchao
03ad77f45c tools/configure.sh and configure.c: Do not remove CONFIG_SIM_M32 if host is specified. 2019-09-19 18:27:22 -06:00
Juha Niskanen
e8b5dd4528 Fix use of undefined pp-token #errror, other typos. 2019-09-19 18:19:18 -06:00
David Sidrane
c6689b3093 stm32h7 SDMMC support IDMA, Interrupt driven, pullups and SDIO 
* stm32h7:Supports ARMV7M Stack check
* stm32h7:sdmmc bug fix writting address 0
* stm32h7:sdmmc Clean up timming
* stm32f7:Kconfig typos, formating
* stm32f7:sdmmc use binary not
* stm32f7:nxstyle formatting
* stm32h7:SDMMC Kconfig add Block Setup, Preflight, Delayed Invalidate
* stm32h7:Correct value of ICR reset
* stm32h7:SDMMC support IDMA, Interrupt driven, pullups and SDIO
* stm32h7:Add AXI
* stm32h7:Workaround for Errata 2.2.9 Reading from AXI SRAM may lead to data read corruption
 2019-09-19 16:13:24 +00:00
Gregory Nutt
9eba6bf018 arch/arm/src/stm32f0l0g0 and boards/arm/stm32f0l0g0/nucleo-g071rb: The last change did NOT eliminate the build problem. This one does. 2019-09-18 15:13:13 -06:00
Gregory Nutt
f581315b06 arch/arm/src/stm32f0l0g0: Fix some link timer errors introduced with recent changes to RCC/PWR. 2019-09-18 14:22:44 -06:00
Xiang Xiao
5fd8f78bf9 net/ipforward, tcp, and udp: Fix a chicken and egg problem by eliminating the check of the arp/neighbor tables before packet transmission 
1. For buffered tcp/udp case, if CONFIG_NET_ARP_SEND/CONFIG_NET_ARP_IPIN/CONFIG_NET_ICMPv6_NEIGHBOR isn't enabled and the table doesn't contain ip<->ethaddr mapping yet, the logic will skip the realtransmission and then arp/neighbor can't steal the final buffer to generate arp/icmpv6 packet.
2.for all other case, the tcp layer or user program should already contain the retransmit logic, the check is redundancy and may generate many duplicated packets if arp/icmpv6 response is too slow because the cursor stop forward. If user still concern about the very first packet lost, he could fix the issue by enabling CONFIG_NET_ARP_SEND/CONFIG_NET_ICMPv6_NEIGHBOR at begin.
 2019-09-18 12:33:41 -06:00
Gregory Nutt
a0ec67bc4c include/nuttx/sensors/ioctl.h: Commands for the VL53L1X did not follow the sequence. Noted by Daniel Pereira de Carvalho. 2019-09-18 07:30:29 -06:00
Alin Jerpelea
54ef3efc35 Merged in alinjerpelea/nuttx (pull request #1033) 
boards: spresense: Add board initialization for isx012

Add isx012 initialization to the board and include the needed headers

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2019-09-18 11:42:35 +00:00
Masayuki Ishikawa
2154a02fa1 Merged in masayuki2009/nuttx.nuttx/fix_comments_in_gs2200m (pull request #1032) 
drivers/wireless/gs2200m.c: Fix comments

Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2019-09-18 11:34:00 +00:00
Augusto Fraga Giachero
08b596d26d rch/arm/src/lpc17xx_40xx/lpc17_40_i2c.c: Respect the I2C_M_NOSTART flag. Sending a restart condition when not requested will break other drivers that depend on this behavior. 2019-09-17 16:14:58 -06:00
Gregory Nutt
a8a59df260 arch/arm/src/stm32f0l0g0/stm32*_pwr.c: Add some files missing in a previouis commit. 2019-09-17 11:34:05 -06:00
Daniel Pereira Volpato
50e34d50b6 boards/arm/stm32f0l0g0/nucleo-g070rb/include/board.hboards/arm/stm32f0l0g0/nucleo-g070rb: Enable PWR peripheral and increase sysclk to max. frequency. SYSCLK can be increased now that VOS and flash wait states are properly configured. 2019-09-17 11:32:51 -06:00
Daniel Pereira Volpato
031b83cff3 arch/arm/src/stm32f0l0g0/stm32*_pwr.c and stm32g0_rcc.c: Scale dynamic voltage and flash wait states properly on STM32G0 chips. 
arch/arm/src/stm32f0l0g0/stm32g0_rcc.c: Set VOS and flash wait states properly
arch/arm/src/stm32f0l0g0/stm32f0l0_pwr.c: Renamed from arch/arm/src/stm32f0l0g0/stm32_pwr.c
arch/arm/src/stm32f0l0g0/stm32g0_pwr.c: Preliminary implementation of PWR module for STM32G0 (stm32_pwr_setvos() only)
 2019-09-17 11:29:49 -06:00
Daniel Pereira Volpato
4737fd7497 boards/arm/stm32f0l0g0/nucleo-g070rb/scripts/ld.script: Fix .ARM.exidx section overlap with .data 2019-09-17 11:23:53 -06:00
Daniel Pereira Volpato
d78e60d18e boards/arm/stm32f0l0g0/nucleo-g070rb: Initial support for board STM32 NUCLEO-G070RB, including NSH config 2019-09-17 11:20:26 -06:00
Daniel Pereira Volpato
61055cee94 Add support for STM32G070xx 
arch/arm/include/stm32f0l0g0: add support for STM32G070CB, STM32G070KB, STM32G070RB
arch/arm/src/stm32f0l0g0: add support for STM32G070CB, STM32G070KB, STM32G070RB
 2019-09-17 11:10:38 -06:00
Alin Jerpelea
b55c518a1a Merged in alinjerpelea/nuttx (pull request #1031) 
boards: spresense: add isx012 camera initialization and config

* boards: spresense: add isx012 camera initialization

    Add the initialization for the isx012 camera sensor.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* boards: spresense: add camera defconfig

    For easy configuration add camera defconfig for spresense board

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2019-09-17 16:58:09 +00:00
Juha Niskanen
ebc6f51641 Fix some typos 2019-09-17 10:46:23 -06:00
Gregory Nutt
8d87e624bf boards/arm/cxd56xx/spresense/Kconfig: Add a configuration to select if an extension board is attached to the SPresence. If there is no extension board attached, the SPresense may run in a low-power mode by default (as determined by the CONFIG_CXD56_CUSTOM_PINCONFIG option). If an extension board is present, then the SPresense will need to run at a higher power mode, selected by the new CONFIG_SPRESENSE_EXTENSION option. 2019-09-17 05:41:10 -06:00
Takayoshi Koizumi
ef28729374 boards/arm/cxd56xx/spresense/include/board_pinconfig.h: Add board specific pin configurations of CXD5602 pins to fit Spresense board. 2019-09-16 15:32:58 -06:00
Gregory Nutt
ecb0b15fd0 libs/libc/math/Kconfig: Should select the NuttX float.h file automatically if the NuttX math library is selected. 2019-09-16 13:29:47 -06:00
Gregory Nutt
a5a7fe2d8a Kconfig and arch/Kconfig: Add some protection so that you cannot select an architecture-specific header file if the architecture does not provide the header file. 2019-09-16 11:47:26 -06:00
Gregory Nutt
20f4e05b09 arch/arm/src/stm32h7/stm32_ethernet.c: Bazooka Joe's fix to the STM32 F7 Ethernet driver (ec4a7be5c2) should be applied to the H7 as well. The other STM32 Ethernet driver already has the change. 2019-09-16 08:24:58 -06:00
Gregory Nutt
5995714cfd boards/mips Linker Scripts: The PIC32M* start-up code initializes .bss by writing 16 bytes at a time in a loop. The start (_sbss) alignment is only required to be 4 bytes since the write is done with 4 store instructions. In a previous change, the end address, _ebss, was aligned to 16 byte to prevent initializing past the end off the .bss region. However, that does not work unless the start address, _sbss, is also aligned to 16 bytes. 2019-09-16 08:14:32 -06:00
Bazooka Joe
ec4a7be5c2 Merged in BazookaJoe1900/nuttx/pr-network_stm32_freebuffer (pull request #1030) 
Large ethernet packet can leads network halt

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2019-09-16 13:52:56 +00:00
Juha Niskanen
8fa646f0e8 drivers/syslog: syslog_force does not set errno so do not test against it. Some changes to comments. 2019-09-16 07:48:48 -06:00
Gregory Nutt
63c9c0c935 sched/semaphore/spinlock.c: Fix build failure caused by a missing semicolon. 2019-09-16 07:44:01 -06:00
Xiang Xiao
ba436b9434 tools/Makefile.unix: Fix build error when issue 'make -B'. mkdir: cannot create directory 'staging': File exists: tools/Makefile.unix:269: recipe for target 'staging' failed' 2019-09-16 07:41:25 -06:00
Xiang Xiao
bf3ffddf2f tools/configure.*: Add -s option to skip .config/Make.defs existence check. 2019-09-16 07:38:29 -06:00
Gregory Nutt
66a55c91e7 Linker scripts: Fix some alignment problems. 2019-09-15 18:06:36 -06:00
Gregory Nutt
805fa49a4e Back out/change some of the alignments in the previous comments. Non-ARM CPUs my have different alignment requirements. AVR, for example, has none. MIPS requires 16-byte alignment of the end of .bss. 2019-09-15 18:02:00 -06:00
Gregory Nutt
2925c28f8f All linker scripts: Preface all _edata defininitions with . = ALIGN(4). Otherwise, the last bytes in the .data section may not be initialized properly. Also convert all linker scripts indent in units of 8-spaces to units of 4-spaces. 2019-09-15 17:22:16 -06:00
Gregory Nutt
0bd60c3722 All linker scripts: Preface all _ebss defininitions with . = ALIGN(4). Otherwise, the last bytes in the .bss section will not be initialized properly. Also convert all linker scripts that use TABs to spaces. 2019-09-15 15:27:58 -06:00
Gregory Nutt
03fc3a2218 Fix a typo I introducted in the last commit. My bad. 2019-09-15 11:14:47 -06:00
Xiang Xiao
bf84868360 tools/Config.mk and Makefile.unix: Support the incremental build for configuration change. 2019-09-15 10:56:26 -06:00
anchao
7ce51e66b9 tools/Config.mk: Eliminate use of the built-in implicit rules. 2019-09-15 08:48:25 -06:00
YanLin Zhu
bcdf9074fe drivers/mtd/gd5f.c: Add gigadevice SPI NAND FLASH driver. 2019-09-15 08:33:22 -06:00
YanLin Zhu
8b10b8ad25 drivers/mtd/gd25.c: Add support for GD25 device with 256-Mbit capacity. 2019-09-15 08:19:06 -06:00
zhangbo_a
636d180219 drivers/mtd/gd25.c: Add support for a new FLASH vendor. 2019-09-15 08:17:19 -06:00
Gregory Nutt
c5ed221e87 Trivial typo fix 2019-09-15 08:16:37 -06:00
Gregory Nutt
a9c55d40ab Update the NuttX 'About' document in preparation for the NuttX-8.1 release. 2019-09-14 09:54:50 -06:00
Gregory Nutt
627724749d Update ReleaseNotes in preparation for the NuttX-8.1 release. 2019-09-14 08:56:25 -06:00
Gregory Nutt
57bd46d931 Fix some typos in the ChangeLog. 2019-09-13 19:01:05 -06:00
Gregory Nutt
e2e3582be3 Update ChangeLog in preparation for the NuttX-8.1 Release. 2019-09-13 11:19:31 -06:00