In the past, header file paths were generated by the incdir command
Now they are generated by concatenating environment variables
In this way, when executing makefile, no shell command will be executed,
it will improve the speed of executing makfile
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
In the past, predefined macros were generated by define.sh scripts
Now they are generated by concatenating environment variables
In this way, when executing makefile, no shell command will be executed,
it will improve the speed of executing makfile
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
api_edrx->enable > LTE_ENABLE)
~~~~~~~~~~~~~~~~ ^ ~~~~~~~~~~
Error: modem/alt1250/altcom_hdlr.c:901:24: error: result of comparison of constant 0 with expression of type 'bool' is always false [-Werror,-Wtautological-constant-compare]
if (api_edrx->enable < LTE_DISABLE ||
~~~~~~~~~~~~~~~~ ^ ~~~~~~~~~~~
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
cxd56_set_volume(CXD56_AUDIO_VOLID_MIXER_OUT, dev->volume);
~~~~~~~~~~~~~~~~ ^~~~~~~~~~~~~~~~~~~~~~~~~~~
Error: audio/cxd56.c:2735:34: error: implicit conversion from enumeration type 'enum cxd56_audio_volid_e' to different enumeration type 'enum cxd56_vol_id_e' [-Werror,-Wenum-conversion]
cxd56_set_volume(CXD56_AUDIO_VOLID_MIXER_OUT, priv->volume);
~~~~~~~~~~~~~~~~ ^~~~~~~~~~~~~~~~~~~~~~~~~~~
Error: audio/cxd56.c:2736:34: error: implicit conversion from enumeration type 'enum cxd56_audio_volid_e' to different enumeration type 'enum cxd56_vol_id_e' [-Werror,-Wenum-conversion]
cxd56_set_volume(CXD56_AUDIO_VOLID_MIXER_IN1, 0);
~~~~~~~~~~~~~~~~ ^~~~~~~~~~~~~~~~~~~~~~~~~~~
Error: audio/cxd56.c:2737:34: error: implicit conversion from enumeration type 'enum cxd56_audio_volid_e' to different enumeration type 'enum cxd56_vol_id_e' [-Werror,-Wenum-conversion]
cxd56_set_volume(CXD56_AUDIO_VOLID_MIXER_IN2, 0);
~~~~~~~~~~~~~~~~ ^~~~~~~~~~~~~~~~~~~~~~~~~~~
Error: audio/cxd56.c:2755:34: error: implicit conversion from enumeration type 'enum cxd56_audio_volid_e' to different enumeration type 'enum cxd56_vol_id_e' [-Werror,-Wenum-conversion]
cxd56_set_volume(CXD56_AUDIO_VOLID_MIXER_OUT,
~~~~~~~~~~~~~~~~ ^~~~~~~~~~~~~~~~~~~~~~~~~~~
Error: audio/cxd56.c:2757:34: error: implicit conversion from enumeration type 'enum cxd56_audio_volid_e' to different enumeration type 'enum cxd56_vol_id_e' [-Werror,-Wenum-conversion]
cxd56_set_volume(CXD56_AUDIO_VOLID_MIXER_IN1,
~~~~~~~~~~~~~~~~ ^~~~~~~~~~~~~~~~~~~~~~~~~~~
Error: audio/cxd56.c:2759:34: error: implicit conversion from enumeration type 'enum cxd56_audio_volid_e' to different enumeration type 'enum cxd56_vol_id_e' [-Werror,-Wenum-conversion]
cxd56_set_volume(CXD56_AUDIO_VOLID_MIXER_IN2,
~~~~~~~~~~~~~~~~ ^~~~~~~~~~~~~~~~~~~~~~~~~~~
Error: audio/cxd56.c:2764:34: error: implicit conversion from enumeration type 'enum cxd56_audio_volid_e' to different enumeration type 'enum cxd56_vol_id_e' [-Werror,-Wenum-conversion]
cxd56_set_volume(CXD56_AUDIO_VOLID_MIXER_OUT, priv->volume);
~~~~~~~~~~~~~~~~ ^~~~~~~~~~~~~~~~~~~~~~~~~~~
Error: audio/cxd56.c:2765:34: error: implicit conversion from enumeration type 'enum cxd56_audio_volid_e' to different enumeration type 'enum cxd56_vol_id_e' [-Werror,-Wenum-conversion]
cxd56_set_volume(CXD56_AUDIO_VOLID_MIXER_IN1, 0);
~~~~~~~~~~~~~~~~ ^~~~~~~~~~~~~~~~~~~~~~~~~~~
Error: audio/cxd56.c:2766:34: error: implicit conversion from enumeration type 'enum cxd56_audio_volid_e' to different enumeration type 'enum cxd56_vol_id_e' [-Werror,-Wenum-conversion]
cxd56_set_volume(CXD56_AUDIO_VOLID_MIXER_IN2, 0);
~~~~~~~~~~~~~~~~ ^~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
1.Don't check the return value of nxsem_init or nxmutex_init
2.Fix some style issue
Signed-off-by: anjiahao <anjiahao@xiaomi.com>
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Like rpmsgdev and rpmsgmtd, rpmsgblk allow the local cpu to
access the block device in the remote cpu.
Signed-off-by: wangbowen6 <wangbowen6@xiaomi.com>
Set the mclk frequency on I2S lower half by 1) checking supported
sample rate, data width and mclk multiplier table and 2) setting
this value using the I2S_MCLKFREQUENCY macro. I2S driver may or
may not implement the i2s_mclkfrequency method for setting the
master clock.
This option, which resolves to -w when CONFIG_CYGWIN_WINTOOL is
configured, is now appended to INCDIR in tools/Config.mk.
See git commit # 5eae32577e in the main
Before this commit, each rpmsgdev server only manages one file
no matter how many times the client opened.
It can't work fine with some complex drivers, such as input driver
(keyboard, touchscreen and button), because input driver will alloc
a new private open structure for every open operation to make sure
all the applications don't miss data when input driver is used by
multiple applications.
This commit solves this problem by making the files in server and
client be one-to-one.
Signed-off-by: wangbowen6 <wangbowen6@xiaomi.com>
It was being passed in number of bytes, but the correct should be the
number of pixels.
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
move usrsock rpmsg driver from userspace to kernel to reduce extra
context switch for usrsock operations
Signed-off-by: liangchaozhong <liangchaozhong@xiaomi.com>
since we can query this value by MTDIOC_ERASESTATE after:
commit 30cb497fe1
Author: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
Date: Tue Jul 13 19:33:12 2021 -0300
mtd: Add MTDIOC_ERASESTATE command for retrieving erase state value
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Summary:
- I noticed that the latest ifconfig command shows nothing
- Finally, I found that gs2200m.c needs to handle SIOCGIFFLAGS
- This commit fixes this issue
Impact:
- gs2200m only
Testing:
- Tested with spresense:wifi
- NOTE: gs2200m_main.c will be updated later
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
This patch fixes unbuffered mode so it actually works.
Also, patch contains fixes for possible bugs that could result in
deadlock or system hang in certain situations.
Signed-off-by: Michał Łyszczek <michal.lyszczek@bofc.pl>
since it is impossible to track producer and consumer
correctly if TCP/IP stack pass IOB directly to netdev
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
0c3db448bb
added the option to generate the waveforms to drive ws2812 and similar LEDs using different
hardware (e.g. RP2040 PIO instead of SPI).
For that new mode, the concept of CONFIG_WS2812_FREQUENCY is different. Instead of
the SPI frequency (commonly a few MHz), it is the frequency of the actual output waveform
(commonly 400 or 800 kHz).
There was an attempt to express the SPI frequency divided by 10, but it's not actually the
case either (it would be divided by 8).
I think it is clearer to explain in Kconfig what CONFIG_WS2812_FREQUENCY means for each mode
and go back to the previous behaviour for the original SPI mode (also to avoid breaking
out-of-tree boards).
The commit 664d45dcba updated the
behavior of the framebuffer's putarea callback enabling it to be
used to draw a particular area of the display. Previously, putarea
was only used to draw the entire area of the display. Any different
area was drawn, row by row, by putrun. Also, before checking for
which callback to call, the framebuffer driver adjusted the buffer
reference that was going to be used for calling the driver's callback
to point to the init of the relevant data. After that commit, the
framebuffer's buffer reference passed to the driver's putarea now
contains the data to draw the entire display. Unlike the previous
version of that implementation, only the putrun's callback buffer
was being referenced from the address that contains the data that
actually is being drawn.
This commit fixes it by adjusting the reference for the run buffer
passed to the putrun/putarea callback. It always starts from the
beginning of the relevant data that is actually being drawn. That is
necessary because lcddev (which uses the same LCD display driver
callbacks) actually don't allocate a buffer containing the data to
draw the whole display, so the same putarea implementation of the
LCD drivers would'n be able to work for both lcddev and framebuffer.
Also it's necessary to pass the stride argument to the LCD drivers
in order to enable them to do partial writes by calculating the
buffer offset while sending row-by-row. The stride is equal the
width multiplied by the bytes per pixel (may add some padding)
for framebuffer and is equal to the lenght of the row being drawn
(multiplied by the same BPP) for lcddev.
Why this approach?
Other possible approaches would be:
1) modify lcddev driver to translate received buffer data to a
buffer similar to the framebuffer. That wouldn't be efficient
considering memory allocation.
2) Create a new callback function. While possible, it'd be confusing
to create a different callback to draw the whole screen and another
to draw only an area of the screen. Also, these callbacks would
differ themselves only from the way the buffer is filled.
3) Simply reverting 664d45dcba would
break the usage of the putarea callback to draw an area of the
display, which would also be inefficient.
This approach is based on the Zephyr's implementation of the ST7789
driver: the buffer starts from the beginiing of the region that would
be drawn. The display device driver's putarea implementation should
check if the operation refers to a full screen/full row and implement
(if possible) a single operation to send the data to be drawn more
efficiently.
Finally, this approach requires that the drivers which implement
the putarea callback and expects the entire framebuffer buffer
to be modified. They don't need to calculate where the data begins
as the new buffer represents the data from the address that is
actually being drawn. This includes adjusting the LCD drivers
GC9A01 and ST7789 and the driver for APA102-based LED matrix display.
In file included from /home/archer/code/nuttx/n4/incubator-nuttx/drivers/rc/lirc_dev.c:29:
drivers/rc/lirc_dev.c: In function 'lirc_raw_event':
drivers/rc/lirc_dev.c:959:14: warning: format '%u' expects argument of type 'unsigned int',
but argument 3 has type 'uint32_t' {aka 'long unsigned int'} [-Wformat=]
959 | rcinfo("delivering %uus %d to lirc\n", ev.duration, ev.pulse ? 1 : 0);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~
| |
| uint32_t {aka long unsigned int}
drivers/rc/lirc_dev.c:959:27: note: format string is defined here
959 | rcinfo("delivering %uus %d to lirc\n", ev.duration, ev.pulse ? 1 : 0);
| ~^
| |
| unsigned int
| %lu
Signed-off-by: chao.an <anchao@xiaomi.com>
1. about interval:
If interval is not set, generation is increased by 1 along with
publish and copy, multi-copy is continuous.
If interval is set, pick proper samples from buffer based on
mainline/user generation, multi-copy is one-by-one.
2. about bufferpos:
user->bufferpos always point to next position to check.
data user last read
----------v--------------------------
| | | |
-------------------^-----------------
bufferpos
If buffer is full, bufferpos point to buffer.head
Examples:
If a buffer contains 4 samples, newest generatoin is 40.
-------------------------------------
|10 |20 |30 |40
------------------------------^------
|
if user's next generation is 42, notify user to copy No.40 sample,
because 42 is closer to 40 than 50.
-------------------------------------
|10 |20 |30 |40
----------------------------------^--
|
if user's next generation is 48, do not notify user,
because 48 is closer to 50, which is next mainline sample.
Signed-off-by: jihandong <jihandong@xiaomi.com>
Signed-off-by: Jiuzhu Dong <dongjiuzhu1@xiaomi.com>
This patch adds upper half driver for IPCC character driver. IPCC
is a Inter Processor Communication Controller.
Driver is still immature and not thoroughly tested, thus
CONFIG_EXPERIMENTAL is required.
Signed-off-by: Michał Łyszczek <michal.lyszczek@bofc.pl>
Certain variants of the W25QxxxJV Quad SPI NOR flash ICs have the Quad
SPI mode disabled after reset. As the w25qxxxjv driver is operating the
device in Quad SPI mode, make sure it gets enabled if required during
device initialization.
Signed-off-by: Michael Jung <michael.jung@secore.ly>
power/pm_procfs.c:282:27: warning: format specifies type 'unsigned long' but the argument has type 'time_t' (aka 'unsigned int') [-Wformat]
dom->wake[state].tv_sec,
^~~~~~~~~~~~~~~~~~~~~~~
make[2]: Entering directory '/home/ligd/platform/m2/audio/frameworks/media'
power/pm_procfs.c:283:27: warning: format specifies type 'unsigned long' but the argument has type 'unsigned int' [-Wformat]
100 * dom->wake[state].tv_sec / sum,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
power/pm_procfs.c:284:27: warning: format specifies type 'unsigned long' but the argument has type 'time_t' (aka 'unsigned int') [-Wformat]
dom->sleep[state].tv_sec,
^~~~~~~~~~~~~~~~~~~~~~~~
power/pm_procfs.c:285:27: warning: format specifies type 'unsigned long' but the argument has type 'unsigned int' [-Wformat]
100 * dom->sleep[state].tv_sec / sum,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
power/pm_procfs.c:286:27: warning: format specifies type 'unsigned long' but the argument has type 'time_t' (aka 'unsigned int') [-Wformat]
total.tv_sec,
^~~~~~~~~~~~
power/pm_procfs.c:287:27: warning: format specifies type 'unsigned long' but the argument has type 'unsigned int' [-Wformat]
100 * total.tv_sec / sum);
^~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: ligd <liguiding1@xiaomi.com>
