Commit Graph

34 Commits

Author SHA1 Message Date
Xiang Xiao
68951e8d72 Remove exra whitespace from files (#189)
* Remove multiple newlines at the end of files
* Remove the whitespace from the end of lines
2020-01-31 09:24:49 -06:00
Gregory Nutt
6309165fe0 tools/nxstyle.c: Add automatic detection of line width based on examining
the width of all block comments. Includes a check to assure that all block
comments use the same line width.

Verified against all .c files under /sched.  There were a few cosmetic changes to the coding style under /sched to account to new, correctly detected problems in the /sched files.
2020-01-12 13:07:54 -03:00
Xiang Xiao
6a3c2aded6 Fix wait loop and void cast (#24)
* Simplify EINTR/ECANCEL error handling

1. Add semaphore uninterruptible wait function
2 .Replace semaphore wait loop with a single uninterruptible wait
3. Replace all sem_xxx to nxsem_xxx

* Unify the void cast usage

1. Remove void cast for function because many place ignore the returned value witout cast
2. Replace void cast for variable with UNUSED macro
2020-01-02 10:54:43 -06:00
Leif Jakob
58e387fc6f Merged in leif_jakob/nuttx/pthread_mutex_timedlock (pull request #830)
support for pthread_mutex_timedlock

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-02-24 20:04:24 +00:00
Gregory Nutt
8fdbb1e0a4 Elimate use of the non-standard type systime_t and replace it the equivalent, standard type clock_t
Squashed commit of the following:

    sched:  Rename all use of system_t to clock_t.
    syscall:  Rename all use of system_t to clock_t.
    net:  Rename all use of system_t to clock_t.
    libs:  Rename all use of system_t to clock_t.
    fs:  Rename all use of system_t to clock_t.
    drivers:  Rename all use of system_t to clock_t.
    arch:  Rename all use of system_t to clock_t.
    include:  Remove definition of systime_t; rename all use of system_t to clock_t.
2018-06-16 12:16:13 -06:00
Gregory Nutt
b54ffe858a Standardization of some function headers. 2018-03-13 09:52:27 -06:00
Gregory Nutt
7cf88d7dbd Make sure that labeling is used consistently in all function headers. 2018-02-01 10:00:02 -06:00
Gregory Nutt
da50646bcf sched/wdog: wd_start() is an internal OS function and should not set the errno value. Reviewed and updated every call to wd_start() to verify if return value is used and if so if the errno value is accessed. 2018-01-31 10:09:14 -06:00
Gregory Nutt
fca07be1df Squashed commit of the following:
Change all calls to mq_send() and mq_timedsend() in the OS to calls to nxmq_send() and nxmq_timedsend(), making appropriate changes for differences in return values.

    sched/mqueue:  Add internal function nxmq_send() and nxmq_timedsend() that are equivalent to mq_send() and mq_timedsend() except that they do not create cancellation points and do to not modify the errno variable.
2017-10-10 08:44:12 -06:00
Gregory Nutt
4810499d3a Squashed commit of the following:
Replace all calls to sigqueue() in the OS proper with calls to nxsig_queue() to avoid accessing the errno variable.

    sched/signal:  Add nxsig_queue() which is functionally equivalent to sigqueue() except that it does not modify the errno variable.
2017-10-07 10:57:09 -06:00
Gregory Nutt
8198ba6a6d This change renames all internal, private NuttX signal-related functions to use the prefix nxsig_ so that they cannot be confused with application interfaces that begin, primarily, with sig_
This is analogous to similar renaming that was done previously for semaphores.

Squashed commit of the following:

    sched/signal:  Fix a few compile warnings introduced by naming changes.

    sched/signal:  Rename all private, internal signl functions to use the nxsig_ prefix.

    sched/signal:  Rename sig_removependingsignal, sig_unmaskpendingsignal, and sig_mqnotempty to nxsig_remove_pendingsignal, nxsig_unmask_pendingsignal, and nxsig_mqnotempty to make it clear that these are OS internal interfaces.

    sched/signal:  Rename sig_findaction and sig_lowest to nxsig_find_action and nxsig_lowest to make it clear that these are OS internal interfaces.

    sched/signal:  Rename sig_allocatepingsigaction and sig_deliver to nxsig_alloc_pendingsigaction and nxsig_deliver to make it clear that these are OS internal interfaces.

    sched/signal:  Rename sig_cleanup, sig_release, sig_releasependingaction, and sig_releasependingsignal to nxsig_cleanup, nxsig_release, nxsig_release_pendingaction, and nxsig_release_pendingsignal to make it clear that these are OS internal interfaces.

    sched/signal:  Rename sig_tcbdispatch and sig_dispatch to nxsig_tcbdispatch and nxsig_dispatch to make it clear that these are OS internal interfaces.

    sched/signal:  Rename sig_releaseaction and sig_pendingset to nxsig_release_action and nxsig_pendingset to make it clear that these are OS internal interfaces.

    sched/signal:  Rename sig_initialize and sig_allocateactionblock to nxsig_initialize and nxsig_alloc_actionblock to make it clear that these are OS internal interfaces.
2017-10-05 13:25:25 -06:00
Gregory Nutt
9568600ab1 Squashed commit of the following:
This commit backs out most of commit b4747286b1.  That change was added because sem_wait() would sometimes cause cancellation points inappropriated.  But with these recent changes, nxsem_wait() is used instead and it is not a cancellation point.

    In the OS, all calls to sem_wait() changed to nxsem_wait().  nxsem_wait() does not return errors via errno so each place where nxsem_wait() is now called must not examine the errno variable.

    In all OS functions (not libraries), change sem_wait() to nxsem_wait().  This will prevent the OS from creating bogus cancellation points and from modifying the per-task errno variable.

    sched/semaphore:  Add the function nxsem_wait().  This is a new internal OS interface.  It is functionally equivalent to sem_wait() except that (1) it is not a cancellation point, and (2) it does not set the per-thread errno value on return.
2017-10-04 15:22:27 -06:00
Jussi Kivilinna
c57d49f420 clock: Add new type ssystime_t for relative 64-bit ticks, change ticks<->time conversion functions to use ssystime_t 2017-04-21 08:51:31 -06:00
Juha Niskanen (Haltian)
b4747286b1 Add logic to disable cancellation points within the OS. This is useful when an internal OS function that is NOT a cancellation point calls an OS function which is a cancellation point. In that case, irrecoverable states may occur if the cancellation is within the OS. 2017-04-11 11:03:25 -06:00
Gregory Nutt
34c5e1c18f Minor cleanup from recent changes. 2017-03-26 14:04:07 -06:00
Gregory Nutt
6e623ce06f pthreads: Partial implementation of final part of robust mutexes: Keep list of all mutexes held by a thread in a list in the TCB. 2017-03-26 12:46:57 -06:00
Gregory Nutt
2c37d369ab pthread: Fix return value of pthread_give/takesemaphore(). Add option to pthread_takesemaphore to ignore EINTR or not. 2017-03-26 11:22:17 -06:00
Gregory Nutt
b52e4e5ecd Move cancellation point definitions to their own header file. 2016-12-10 09:08:26 -06:00
Gregory Nutt
bc3ca25cc7 Cancellation points: Close up some logic to eliminte some race conditions. 2016-12-10 08:36:58 -06:00
Gregory Nutt
7fce8022c6 Finishes all cancellation point logic 2016-12-09 16:50:34 -06:00
Gregory Nutt
13cac3b592 sched/: Change some *err() message to *info() messages if what was a *dbg() message does not indicate and error condition. 2016-06-11 16:42:42 -06:00
Gregory Nutt
a1469a3e95 Add CONFIG_DEBUG_ERROR. Change names of *dbg() * *err() 2016-06-11 15:50:49 -06:00
Gregory Nutt
6e3107650d nuttx/sched: Replace irqsave() with enter_critical_section(); replace irqrestore() with leave_critical_section() 2016-02-14 08:17:46 -06:00
Gregory Nutt
74db48202e sched/: Replace explict references to g_readytorun with indirect references via the this_task() macro 2016-02-06 17:44:41 -06:00
Gregory Nutt
79d554939e sched/: Fix some spacing issues 2015-10-07 19:59:14 -06:00
Gregory Nutt
cb9e27c3b0 Standardize naming used for public data and function groupings 2015-10-02 16:30:35 -06:00
Gregory Nutt
768d892188 Add si_errno to siginfo_t 2015-08-14 10:10:32 -06:00
Juha Niskanen
d16053c33c sched/pthread: Use -1 instead of 0 as PID for unclaimed mutexes 2015-06-16 08:27:38 -06:00
Gregory Nutt
b4423c1eed Make some file section headers more consistent with standard 2015-04-08 06:47:36 -06:00
Gregory Nutt
ad9b3f8ab8 wdog.h does not contain any application interface, only internal OS interface. Further, it is non-standard. Move wdog.h from include/ to include/nuttx. For the same reason, move the description of the watchdog timer interfaces from the Users Guide to the Porting Guide. 2014-08-21 11:16:55 -06:00
Gregory Nutt
d798dd37a7 Replace os_internal.h with sched/sched.h in files that actually reference something in sched.h 2014-08-08 17:53:55 -06:00
Gregory Nutt
d4b56eb3cc Move clock functions from sched/ to sched/clock 2014-08-08 14:43:02 -06:00
Gregory Nutt
0f318e9249 Move watchdog functions from sched/ to sched/wdog 2014-08-08 14:21:48 -06:00
Gregory Nutt
cb79407ced Move all pthread files from sched/ to sched/pthread 2014-08-08 12:55:02 -06:00