Commit Graph

22 Commits

Author SHA1 Message Date
wanggang26
0e7e7c4ee6 rpmb: add virtio rpmb support
The RPMB partition cannot be accessed via standard block layer, but by a set of specific commands: WRITE, READ, GET_WRITE_COUNTER, and PROGRAM_KEY. Such a partition provides authenticated and replay protected access, hence suitable as a secure storage.

Signed-off-by: wanggang26 <wanggang26@xiaomi.com>
2023-09-09 00:13:25 +08:00
chao an
b60f01a55b inode/i_private: remove all unnecessary cast for i_private
Signed-off-by: chao an <anchao@xiaomi.com>
2023-08-29 08:58:07 +02:00
chao an
7aa45305b7 fs/inode: remove all unnecessary check for filep/inode
Since VFS layer already contains sanity checks, so remove unnecessary lower half checks

Signed-off-by: chao an <anchao@xiaomi.com>
2023-08-29 09:47:11 +08:00
Zhe Weng
5597b8a9e2 drivers/virtio-net: Add support to offload small IOBs
TCP receive tested with different IOB_BUFSIZE:
|             | 256B vs 1534B | 512B vs 1534B | 768B vs 1534B |
| :---------: | :-----------: | :-----------: | :-----------: |
|     Non-SMP |     ~85%      |     ~93%      |     ~96%      |
|  armv8a-SMP |     ~66%      |     ~84%      |     ~92%      |
| rv32/64-SMP |     ~52%      |     ~72%      |     ~83%      |

It seems we still get performance penalty on smaller IOBs, and may be
affected more under SMP mode. It may be caused by critical sections in
IOB operations.

Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
2023-08-22 16:34:21 +09:00
Zhe Weng
2fa68fbddd drivers/virtio-net: Support different LL_GUARDSIZE
Previously, the CONFIG_NET_LL_GUARDSIZE is fixed to 32 (64-Bit) or
28 (32-Bit), it's a little bit tricky.
Now add support to any value greater than minimal size.

Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
2023-08-22 16:34:21 +09:00
Petro Karashchenko
075738cf14 net/ip: print ip addresses using ip4_addrN macro
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
2023-08-19 13:28:21 -03:00
rongyichang
72587c6e79 drivers/virtio: add virtio input driver
Signed-off-by: liuhongchao <liuhongchao@xiaomi.com>
2023-08-13 11:47:39 -03:00
shipei
3cabf7ced8 audio:add virtio snd driver
playback test:
nxplayer
device /dev/audio/pcm0p
playraw /data/test.wav 2 16 44100
stop

record test:
nxrecorder
device /dev/audio/pcm0c
recordraw /data/rec.pcm 2 16 16000
stop

Signed-off-by: shipei <shipei@xiaomi.com>
2023-08-11 20:40:40 +08:00
Peter Bee
78b993c4e8 drivers/virtio: add virtio gpu driver
This patch provides basic framebuffer display support for virtio.
Multiple displays are supported.

Signed-off-by: Peter Bee <bijunda1@xiaomi.com>
2023-08-11 20:20:11 +08:00
wangbowen6
9aa57b6c53 virtio: add virtio framework in NuttX
1. virtio devics/drivers match and probe/remote mechanism;
2. virtio mmio transport layer based on OpenAmp (Compatible with both
   virtio mmio version 1 and 2);
3. virtio-serial driver based on new virtio framework;
4. virtio-rng driver based on new virtio framework;
5. virtio-net driver based on new virtio framework
   (IOB Offload implementation);
6. virtio-blk driver based on new virtio framework;
7. Remove the old virtio mmio framework, the old framework only
   support mmio transport layer, and the new framwork support
   more transport layer and this commit has implemented all the
   old virtio drivers;
8. Refresh the the qemu-arm64 and qemu-riscv virtio related
   configs, and update its README.txt;

New virtio-net driver has better performance
Compared with previous virtio-mmio-net:
|                        | master/-c | master/-s | this/-c | this/-s |
| :--------------------: | :-------: | :-------: | :-----: | :-----: |
| qemu-armv8a:netnsh     |  539Mbps  |  524Mbps  | 906Mbps | 715Mbps |
| qemu-armv8a:netnsh_smp |  401Mbps  |  437Mbps  | 583Mbps | 505Mbps |
| rv-virt:netnsh         |  487Mbps  |  512Mbps  | 760Mbps | 634Mbps |
| rv-virt:netnsh_smp     |  387Mbps  |  455Mbps  | 447Mbps | 502Mbps |
| rv-virt:netnsh64       |  602Mbps  |  595Mbps  | 881Mbps | 769Mbps |
| rv-virt:netnsh64_smp   |  414Mbps  |  515Mbps  | 491Mbps | 525Mbps |
| rv-virt:knetnsh64      |  515Mbps  |  457Mbps  | 606Mbps | 540Mbps |
| rv-virt:knetnsh64_smp  |  308Mbps  |  389Mbps  | 415Mbps | 474Mbps |
Note: Both CONFIG_IOB_NBUFFERS=64, using iperf command, all in Mbits/sec
      Tested in QEMU 7.2.2

Signed-off-by: wangbowen6 <wangbowen6@xiaomi.com>
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
2023-08-10 03:39:39 +08:00
Masayuki Ishikawa
5e7ce13b3e drivers: virtio: Use one dscriptor for RX in virtio-mmio-net.c
Summary:
- In this implementation, only one descriptor is used for RX.
- NOTE: we still use two descriptors for TX

Impact:
- None

Testing:
- Tested with qemu-7.1

Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2023-06-21 16:38:04 +08:00
Masayuki Ishikawa
ee364e115a drivers: virtio: Remove unused code and fix comments in virtio-mmio-net.c
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2023-06-04 01:14:08 +08:00
Masayuki Ishikawa
e149a1278b dirivers: virtio: Fix virtnet_virtnet_txpoll() in virtio-mmio-net.c
Summary:
- I noticed that nfsmount always timed out.
- This commit fixes this issue.

Impact:
- None

Testing:
- Tested wih qemu-7.1
- NOTE: defconfigs will be updated later.

Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2023-06-02 16:28:34 +08:00
Masayuki Ishikawa
6b35a49f6e dirivers: virtio: Fix virtnet_transmit() in virtio-mmio-net.c
Summary:
- I noticed that the driver sends incorrect packets sometimes.
- This commit fixes this issue.

Impact:
- None

Testing:
- Tested with qemu-7.1

Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2023-06-01 13:44:30 +08:00
Xiang Xiao
7990f90915 Indent the define statement by two spaces
follow the code style convention

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2023-05-21 09:52:08 -03:00
Masayuki Ishikawa
498a75a58b drivers: virtio: Add virtio-mmio-blk
Summary:
- This commit adds virtio-mmio-blk driver

Impact:
- None

Testing:
- Tested with rv-virt:netnsh which will be updated later

Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2023-05-13 13:58:09 +08:00
chao an
e942a7c55e build/Kconfig: fix warnings detected by kconfiglib
Signed-off-by: chao an <anchao@xiaomi.com>
2023-02-09 20:07:46 +08:00
Zhe Weng
5e42bd97cd virtio/net: Try fix virtnet logic
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
2023-01-09 10:10:49 +09:00
Xiang Xiao
d5689e070b net/arp: Remove nuttx/net/arp.h
1.move ARPHRD_ETHER to netinet/arp.h
1.move arp_entry_s to net/arp/arp.h
2.move arp_input to nuttx/net/netdev.h

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-12-16 22:10:59 +02:00
chao an
cda8b79950 virtio/net: reschedule interrupt work If rx data remaining
Signed-off-by: chao an <anchao@xiaomi.com>
2022-12-12 16:56:11 +09:00
Xiang Xiao
c6e9edcbb6 net: Rename arp_arpin to arp_input
align with other similar function(e.g. ipv4_input and ipv6_input)

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-12-04 20:39:21 +08:00
Masayuki Ishikawa
8b4ffb8d3e virtio: Add virtio drivers
Summary:
- This commit adds virtio-mmio and virtio-net drivers

Impact:
- None (new drivers)

Testing:
- Tested with rv-virt (will be updated later) with QEMU-7.1

Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2022-11-29 13:16:44 +08:00