Remove TABs
Fix indentation
Fix Multi-line comments
Fix Comments to the Right of Statements.
Fix nuttx coding style
Fix Comments to the Right of Statements.
support to control the opening or closing of the specified channel through the syslogmask command at runtime
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
usage:
1. Connect Jlink, start JLinkGDBServer
JLinkGDBServer -if SWD -device stm32h743zi -speed 16000
2. Listen to the RTT port data and forward it to the virtual serial port
sudo socat -d -d PTY,link=/dev/ttyRTT0,raw,ignoreeof TCP:127.0.0.1:19021,reuseaddr
3. Read serial data
minicom -D /dev/ttyRTT0
Performance:(STM32H743, 400MHZ)
time "dd if=/dev/zero of=/dev/console bs=512 count=2048"
6.67 sec 157KB/s
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
Take the idea from Linux's iw_handler array and esp32c3_wlan's wlan_ops_s, and make it a common logic of upper-half driver.
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
1. Update all CMakeLists.txt to adapt to new layout
2. Fix cmake build break
3. Update all new file license
4. Fully compatible with current compilation environment(use configure.sh or cmake as you choose)
------------------
How to test
From within nuttx/. Configure:
cmake -B build -DBOARD_CONFIG=sim/nsh -GNinja
cmake -B build -DBOARD_CONFIG=sim:nsh -GNinja
cmake -B build -DBOARD_CONFIG=sabre-6quad/smp -GNinja
cmake -B build -DBOARD_CONFIG=lm3s6965-ek/qemu-flat -GNinja
(or full path in custom board) :
cmake -B build -DBOARD_CONFIG=$PWD/boards/sim/sim/sim/configs/nsh -GNinja
This uses ninja generator (install with sudo apt install ninja-build). To build:
$ cmake --build build
menuconfig:
$ cmake --build build -t menuconfig
--------------------------
2. cmake/build: reformat the cmake style by cmake-format
https://github.com/cheshirekow/cmake_format
$ pip install cmakelang
$ for i in `find -name CMakeLists.txt`;do cmake-format $i -o $i;done
$ for i in `find -name *\.cmake`;do cmake-format $i -o $i;done
Co-authored-by: Matias N <matias@protobits.dev>
Signed-off-by: chao an <anchao@xiaomi.com>
There is no need to use global spinlock to protect netdev
specific data counters. Allocate per-netdev specific spinlock
to get better locking granularity.
Move C/C++ atomic support checking to compiler.h
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
LED effects must be implemented in the lower-half of the LED driver.
The interface is designed to supports the following LED effects:
- intenisty (PWM)
- Bling (Timer)
- Fade in, Fade out (Ramp)
In this nested loop, the iteration variable is the same for both loops.
This is a typo and the inner loop should use a new loop variable.
Signed-off-by: Mingjie Shen <shen497@purdue.edu>
Memory pointed by priv may be used (in line 1289) after it is
freed in line 1283.
Fix by adding the missing return statement in error handling.
Signed-off-by: Mingjie Shen <shen497@purdue.edu>
It is used to write the log message to the channel immediately
when the log message is generated in the interrupt context, which
is faster than the normal force callback.
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
syslog_force is used to force the syslog output to the
console in interrupt context, but we can use syslog_write
to do the same(and more) thing.
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Summary:
- In this implementation, only one descriptor is used for RX.
- NOTE: we still use two descriptors for TX
Impact:
- None
Testing:
- Tested with qemu-7.1
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
if number of bytes available for reading more than zero,set USRSOCK_EVENT_RECVFROM_AVAIL flag into the event
Signed-off-by: wangchen <wangchen41@xiaomi.com>
If the rptun driver set auto start, the smetx may has been used
in rptun_notify_wait() but not inited.
Signed-off-by: wangbowen6 <wangbowen6@xiaomi.com>
Directly return -ENOTTY in rpmsgxxx_ioctl() when the command is
not supported to avoid fdsan command FIOC_SETTAG and FIOC_GETTAG
pass to the rpmsg dev/mtd/blk server with CONFIG_FDSAN enabled.
Signed-off-by: wangbowen6 <wangbowen6@xiaomi.com>
the previous patch can not handle the revent is POLLHUP or POLLERR,
poll_setup needs to be executed only when the POLLIN or POLLOUT event
changes.
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
Fix warning:
```
serial/ptmx.c:205:34: warning: ‘%d’ directive output may be truncated writing between 1 and 10 bytes into a region of size 8 [-Wformat-truncation=]
205 | snprintf(devname, 16, "/dev/pty%d", minor);
|
serial/ptmx.c:205:25: note: directive argument in the range [0, 2147483647]
205 | snprintf(devname, 16, "/dev/pty%d", minor);
| ^~~~~~~~~~~~
serial/ptmx.c:205:3: note: ‘snprintf’ output between 10 and 19 bytes into a destination of size 16
205 | snprintf(devname, 16, "/dev/pty%d", minor);
```
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
Updated alt1250 driver with regarding to the following changes.
- Add LTE hibernation feature
- Split source code per module
- Some refactoring
- Some bug fixes
This commit reverts 19f269e54b and
substitutes the semaphore to a mutex, used as a locking mechanism
to avoid syslog messages being messed.
Considering SMP, threads running on different CPUs could call
syslog_default_write simultaneously. It then calls `up_nputs` that,
in most of the implementations, calls `up_putc` multiple times to
write to the serial. So, calling it at the same would cause syslog
messages to interfere with each other.
`up_nputs` and `up_putc` are low-level functions that could be used
during initialization and by the interrupt handler. Hence, it isn't
advisable to implement any locking mechanism on them. On the other
hand, syslog can also be used from the interrupt: if the interrupt
buffer is selected (`CONFIG_SYSLOG_INTBUFFER=y`), the syslog
messages will be flushed when we aren't serving an interrupt.
On the contrary, if it isn't set, it would call the registered
`sc_force` callback, which calls `syslog_default_putc` instead of
the lock-protected `syslog_default_write`.
Summary:
- I noticed that the driver sends incorrect packets sometimes.
- This commit fixes this issue.
Impact:
- None
Testing:
- Tested with qemu-7.1
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
This is a refactored version of the SLIP network driver. Updates
include:
1. The original design started two kernel threads per SLIP device.
The refactored version uses file_poll to essentially be driven
by the UART RX and TX interrupts and pushes work to the low
priority work queue.
2. The SLIP byte un-/stuffing is more efficient now, using memcpy
instead of handling each byte individually.
3. The switch of the old SLIP driver to IOBs caused buffer overwrites
if packets were sent that would not fit into a single IOB. This is
fixed now.
Signed-off-by: Michael Jung <michael.jung@secore.ly>
When updating the full-screen data, sq_ init() will clear the updqueue and add just one new full-screen data to the updqueue. So when the vnc_updater thread is awakened, it may read a null data due to multiple reading, leading to vnc_updater thread exited , which is not expected.
Signed-off-by: jianglianfang <jianglianfang@xiaomi.com>
set touch.maxpoint to 1 in vnc_server.c for circbuf_init，otherwise
touch_event will circbuf_overwrite a wrong value.
test step:vnc run lvgldemo，test input event
Signed-off-by: jianglianfang <jianglianfang@xiaomi.com>
USB drivers should not try control devices in the usbhost_disconnected
function. The control endpoint is NULL at this point because the device
has already been disconnected.
Before this change, the hub driver crashed when the child called
usbhost_hubpwr after the parent had already deactivated the control
pipe and set hport->ep0 to NULL.
1 Gbit W25Q01JV flash uses two 512 Mbit dies. This requires specific
operations in the driver in order to support the entire 1 Gbit region.
This commit adds dual die support for W25Q01JV flash.
Generally the driver has to switch active dies when die specific read from
status register is required (therefore before read, write, erase and when
checking if write status register was successful).
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
if multiple threads are doing serial read/write at the same time,
the driver will only wake up one of the thread, which will cause
other threads fail to be woken up in time and cause blocking
Signed-off-by: chao an <anchao@xiaomi.com>
Before atomic is ready on every platform, we need a way to protect
quota, previously it's protected by net_lock, but this makes netpkt_xxx
interfaces unable to be called under interrupt context, so changed to
spin lock. Also, we can easily change them into atomic under this
implementation.
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
All interrupts must be disabled to prevent re-entrancy and to prevent
interrupts from firing in the serial driver code.
Signed-off-by: hujun5 <hujun5@xiaomi.com>
W25QXXXJV_WRITE_STATUS_2 register uses just first byte therefore all
operations has to be done in priv->cmdbuf[0]. Previous priv->cmdbuf[1]
caused QuadSPI mode not being enabled.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
Summary:
- This commit adds virtio-mmio-blk driver
Impact:
- None
Testing:
- Tested with rv-virt:netnsh which will be updated later
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
If the current poll setup only has POLLIN, adding POLLOUT does not cause the
protocol stack to refocus on flags such as TCP_ACK or UDP_POLL, the user is
not notified when flags for POLLOUT relationships appear and vice versa,
so we have to call poll_setup again.
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
An off-by-one error caused invalid memory to be accessed when the
last port was used. The first entry, at index 0, was never used.
The USB standard uses 1-based numbering for hub ports. This number
was used to index an array. This change converts the port number to
a zero-based port index when the array is accessed. The zero-based
value in the port field of the usbhost_hubport_s structure is also
converted before printing.
For testing, this bug was exposed on a 4 port hub when port 4 was
used after changing USBHUB_MAX_PORTS to 4 in hub.h. The bug should
also be triggered without changing hub.h if a 7 port hub is
available.
Considering that the future fb needs to achieve dynamic resolution, the address and size of fbmem will be redistributed on the bottom driver side, so remove fbmem, fblen, and bpp cached in fb_chardev_s, and change it to call getplaneinfo every time to re-acquire panel info from the bottom driver. Avoid cache coherency problems.
Signed-off-by: pengyiqiang <pengyiqiang@xiaomi.com>
Signed-off-by: jianglianfang <jianglianfang@xiaomi.com>
Devices connected to the same USB bus should have unique function addresses.
This was not true for root hubs with multiple ports. After this change,
enumeration is more reliable on the sama5d3-xplained board when both root hub
ports are used.
This change amounts to using one usbhost_devaddr_s object per root hub
instead of one per root hub port. For the majority of boards only one
root hub port is available so no change in behavior should be expected.
At present, the serial drivers qemu_serial.c and serial_pl011.c on the fvp-v8r and qemu platforms in arm64 are duplicated
and need to be merged. The plan is to place them under the drivers\serial directory to create a common code module,
so that both fvp-v8r and qemu can use the same code.
In the future, if new platforms use pl011 serial ports, they can also be directly reused
Signed-off-by: hujun5 <hujun5@xiaomi.com>
warning: The int symbol SYSLOG_RPMSG_WORK_DELAY (defined at drivers/syslog/Kconfig:274) is being evaluated in a logical context somewhere. It will always evaluate to n.
make: *** [tools/Unix.mk:663: olddefconfig] Error 1
Signed-off-by: chao an <anchao@xiaomi.com>
follow how Linux report the correction information from ecc:
http://www.infradead.org/pipermail/linux-mtd/2012-March/040305.html
since this information is very useful to file system(e.g. yaffs, ubi/buifs)
which is specially designed for nand flash.
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Since not all nand devices follow ONFI spec, nand_raw_initialize could be used to skip ONFI special action
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Current driver supports MTDIOC_BULKERASE ioctl that erases the entire
device. The added ioctl MTDIOC_ERASESECTORS adds possibility to erase
just sectors defined by the user.
This is similar to MEMERASE call in Linux kernel.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
Summary:
- I noticed that mtu info with ifconfig shows incorrect size.
- This commit fixes this issue.
Impact:
- None
Testing:
- Tested with spresense:wifi_smp
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Similar to the fix introduced by
4d6a8663fa, it's necessary to set
one end of the file_pipe as non-blocking temporarily while opening
the other end to avoid it blocking unexpectedily.
The spawn proxy thread is a special existence in NuttX, usually some developers
spend a lot of time on stack overflow of spawn proxy thread:
https://github.com/apache/nuttx/issues/9046https://github.com/apache/nuttx/pull/9081
In order to avoid similar issues, this PR will remove spawn proxy thread to simplify
the process of task/posix_spawn().
1. Postpone the related processing of spawn file actions until after task_init()
2. Delete the temporary thread of spawn proxy and related global variables
Signed-off-by: chao an <anchao@xiaomi.com>
Add private data for spi_bitbang low-level driver to add an instance
specific private data.
And add spi_destroy_bitbang() to clean up a driver instance.
When executing up_fbinitialize, the driver may turn on the vsync interrupt. If the vsync interrupt calls fb_pollnotify before executing fb->vtable->priv = fb it will cause null pointer access and crash.
Signed-off-by: pengyiqiang <pengyiqiang@xiaomi.com>
- Fix DMA addressing issues within litex_sendsetup/litex_recvsetup
- Extend with handling specific to eMMC commands during init & use.
- Cleanup of 4-bit BUS handling for SD and eMMC
- For eMMC, Send CMD0 during init as per JEDEC v4.41 for pre-idle
WIP
WIP - ALS now OK with full IOCTL.
WIP
WIP
ALS now works as intended
WIP - getting to bottom of crash when ctrl-c the app
Seems to all work...
ioctl #define changes
Update ioctl.h
Maybe final changes
Maybe final changes - again
Delete .settings directory
Delete nuttx Default.launch
Maybe final changes - again
changes after initial feedback
changes after initial feedback
Add snerr error when incorrect device ID seen
Update apds9922.c
Revert "Merge branch 'apds9922' of https://github.com/TimJTi/nuttx into apds9922"
This reverts commit 8fdf5cbfb783d25251d13bc338ece6adca1308bc, reversing
changes made to 0d58237ba27f3cf87cf711658f5388d974be502e.
Improve probe error messages
APDS9922
WIP
WIP - ALS now OK with full IOCTL.
WIP
WIP
ALS now works as intended
WIP - getting to bottom of crash when ctrl-c the app
Seems to all work...
ioctl #define changes
Update ioctl.h
Maybe final changes
Maybe final changes - again
Delete .settings directory
Delete nuttx Default.launch
Maybe final changes - again
changes after initial feedback
changes after initial feedback
Add snerr error when incorrect device ID seen
Update apds9922.c
Revert "Merge branch 'apds9922' of https://github.com/TimJTi/nuttx into apds9922"
This reverts commit 8fdf5cbfb783d25251d13bc338ece6adca1308bc, reversing
changes made to 0d58237ba27f3cf87cf711658f5388d974be502e.
Improve probe error messages
Update drivers/sensors/apds9922.c
Co-authored-by: Petro Karashchenko <petro.karashchenko@gmail.com>
Update drivers/sensors/apds9922.c
Co-authored-by: Petro Karashchenko <petro.karashchenko@gmail.com>
Update drivers/sensors/apds9922.c
Co-authored-by: Petro Karashchenko <petro.karashchenko@gmail.com>
Update drivers/sensors/apds9922.c
Co-authored-by: Petro Karashchenko <petro.karashchenko@gmail.com>
Update drivers/sensors/apds9922.c
Co-authored-by: Petro Karashchenko <petro.karashchenko@gmail.com>
Update drivers/sensors/apds9922.c
Co-authored-by: Petro Karashchenko <petro.karashchenko@gmail.com>
Update drivers/sensors/apds9922.c
Co-authored-by: Petro Karashchenko <petro.karashchenko@gmail.com>
Update drivers/sensors/apds9922.c
Co-authored-by: Petro Karashchenko <petro.karashchenko@gmail.com>
Update drivers/sensors/apds9922.c
Co-authored-by: Petro Karashchenko <petro.karashchenko@gmail.com>
Update drivers/sensors/apds9922.c
Co-authored-by: Petro Karashchenko <petro.karashchenko@gmail.com>
Update drivers/sensors/apds9922.c
Co-authored-by: Petro Karashchenko <petro.karashchenko@gmail.com>
Update drivers/sensors/apds9922.c
Co-authored-by: Petro Karashchenko <petro.karashchenko@gmail.com>
Update drivers/sensors/apds9922.c
Co-authored-by: Petro Karashchenko <petro.karashchenko@gmail.com>
Update drivers/sensors/apds9922.c
Co-authored-by: Petro Karashchenko <petro.karashchenko@gmail.com>
Delete .gitignore
Changes after PR review
Remove static arrays from header file
Update apds9922.c
improvements to enum usage
Restore .gitignore
Update Kconfig
Update .gitignore
Update .gitignore
According to https://pubs.opengroup.org/onlinepubs/9699919799/functions/open.html
"
When opening a FIFO with O_RDONLY or O_WRONLY set:
* If O_NONBLOCK is set, an open() for reading-only shall return
without delay. An open() for writing-only shall return an error
if no process currently has the file open for reading.
* If O_NONBLOCK is clear, an open() for reading-only shall block
the calling thread until a thread opens the file for writing.
An open() for writing-only shall block the calling thread until
a thread opens the file for reading.
"
This commit has an equivalent on nuttx-apps: EXAMPLES_PIPE app
was updated to be able to check pipes and named pipes behavior.
Implement local mode control (ECHO only) for telnet, this allow application to disable ECHO of telnet, it's useful to input password during shell login and other case.
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
If TELNET_CHARACTER_MODE is set, the ECHO must be handled by the telnet server.
So this option is useless. We need a new approach to control the ECHO behavior.
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
It's better to raise error before client sends its (NIOVEC+1)th buffer
(and release buffers held by server), otherwise the client may stuck at
getting (NIOVEC+1)th tx buffer if NIOVEC is equal to rpmsg buffer num.
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
Found a problem:
When sendto handler gets an error, it will release all its rx buffer,
then iov_base becomes NULL. But it cannot let client stop its request,
then the next data from client cannot be handled by usrsock server
correctly.
It's better to note down the remaining bytes, then we can stop at
correct time.
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
Summary:
- Support arm64 pmu api, Currently only the cycle counter function is supported.
- Using ARM64 PMU hardware capability to implement perf interface, modify all
perf interface related code.
- Support for pmu init under smp.
Signed-off-by: wangming9 <wangming9@xiaomi.com>
After enabling this option, you can automatically trace the function instrumentation without adding tracepoint manually.
This is similar to the Function Trace effect of the linux kernel
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
Using the interrupt pipe is recommended in the Get_Report
request section of the HID standard. This option has been
added to support some keyboards that refuse to return valid
keys when polled using the Get_Report request. Support for
the Caps Lock key, including LED, has also been added.
Support mirror display by X/Y axis, it's useful for
single portrait/landscape but need to mirror specific direction.
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
Choose a divider value that matches the description provided within
the same header file.
Include stddef.h to fix compiler errors because NULL is not defined.
Make logs print protocol, vid and pid consistently, (decimal hex hex).
note/note_driver.c:154:7: warning: unsigned conversion from ‘int’ to ‘unsigned char’ changes value from ‘65535’ to ‘255’ [-Woverflow]
154 | , CONFIG_SCHED_INSTRUMENTATION_CPUSET
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
Align the pty behavior to linux/bsd,
Also fix the ECHO issue with microadb after https://github.com/apache/nuttx/pull/8691.
adb shell will echo normally with this patch.
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
