drivers/sensors/bme680.c: The bme680 driver
sensor.h: Added new type of sensor (Gas) to be used for retrieving the bme680 data
esp32/common/src/esp32_bme680.c: bme680 support on esp32
esp32/esp32-sparrow_kit/esp32_bringup.c: added support for the bme680
esp32/esp32-sparrow-kit/configs/nsh/defconfig: fixed defconfig ci problem
Signed-off-by: simonatoaca <simona.alexandra2000@gmail.com>
esp32-sparrow-kit: Fixed defconfig
Signed-off-by: simonatoaca <simona.alexandra2000@gmail.com>
Code is now C89 compatible
Signed-off-by: simonatoaca <simona.alexandra2000@gmail.com>
Reused already defined sensor data structs by registering every sub-sensor separately
Signed-off-by: simonatoaca <simona.alexandra2000@gmail.com>
Implemented suggestions
Signed-off-by: simonatoaca <simona.alexandra2000@gmail.com>
WIP
WIP - ALS now OK with full IOCTL.
WIP
WIP
ALS now works as intended
WIP - getting to bottom of crash when ctrl-c the app
Seems to all work...
ioctl #define changes
Update ioctl.h
Maybe final changes
Maybe final changes - again
Delete .settings directory
Delete nuttx Default.launch
Maybe final changes - again
changes after initial feedback
changes after initial feedback
Add snerr error when incorrect device ID seen
Update apds9922.c
Revert "Merge branch 'apds9922' of https://github.com/TimJTi/nuttx into apds9922"
This reverts commit 8fdf5cbfb783d25251d13bc338ece6adca1308bc, reversing
changes made to 0d58237ba27f3cf87cf711658f5388d974be502e.
Improve probe error messages
APDS9922
WIP
WIP - ALS now OK with full IOCTL.
WIP
WIP
ALS now works as intended
WIP - getting to bottom of crash when ctrl-c the app
Seems to all work...
ioctl #define changes
Update ioctl.h
Maybe final changes
Maybe final changes - again
Delete .settings directory
Delete nuttx Default.launch
Maybe final changes - again
changes after initial feedback
changes after initial feedback
Add snerr error when incorrect device ID seen
Update apds9922.c
Revert "Merge branch 'apds9922' of https://github.com/TimJTi/nuttx into apds9922"
This reverts commit 8fdf5cbfb783d25251d13bc338ece6adca1308bc, reversing
changes made to 0d58237ba27f3cf87cf711658f5388d974be502e.
Improve probe error messages
Update drivers/sensors/apds9922.c
Co-authored-by: Petro Karashchenko <petro.karashchenko@gmail.com>
Update drivers/sensors/apds9922.c
Co-authored-by: Petro Karashchenko <petro.karashchenko@gmail.com>
Update drivers/sensors/apds9922.c
Co-authored-by: Petro Karashchenko <petro.karashchenko@gmail.com>
Update drivers/sensors/apds9922.c
Co-authored-by: Petro Karashchenko <petro.karashchenko@gmail.com>
Update drivers/sensors/apds9922.c
Co-authored-by: Petro Karashchenko <petro.karashchenko@gmail.com>
Update drivers/sensors/apds9922.c
Co-authored-by: Petro Karashchenko <petro.karashchenko@gmail.com>
Update drivers/sensors/apds9922.c
Co-authored-by: Petro Karashchenko <petro.karashchenko@gmail.com>
Update drivers/sensors/apds9922.c
Co-authored-by: Petro Karashchenko <petro.karashchenko@gmail.com>
Update drivers/sensors/apds9922.c
Co-authored-by: Petro Karashchenko <petro.karashchenko@gmail.com>
Update drivers/sensors/apds9922.c
Co-authored-by: Petro Karashchenko <petro.karashchenko@gmail.com>
Update drivers/sensors/apds9922.c
Co-authored-by: Petro Karashchenko <petro.karashchenko@gmail.com>
Update drivers/sensors/apds9922.c
Co-authored-by: Petro Karashchenko <petro.karashchenko@gmail.com>
Update drivers/sensors/apds9922.c
Co-authored-by: Petro Karashchenko <petro.karashchenko@gmail.com>
Update drivers/sensors/apds9922.c
Co-authored-by: Petro Karashchenko <petro.karashchenko@gmail.com>
Delete .gitignore
Changes after PR review
Remove static arrays from header file
Update apds9922.c
improvements to enum usage
Restore .gitignore
Update Kconfig
Update .gitignore
Update .gitignore
Add support for the LTR308 ambient light sensor through I2C. Currently,
the interrupt-driven mode of operation is not supported.
Signed-off-by: Robert-Ionut Alexa <robertalexa2000@gmail.com>
1.Allow multi users to access the same sensor device simultaneously.
2.Get real state of sensor device by cmd SNIOC_GET_STATE for users.
3.Get update state since last read by poll without timeout for users.
4.Sensor device will be activated when first user open and will close when
last user closed.
5.When multi users to access device, driver always set the minimum
sampling interval and latency to the sensor device and allow
downsampled for users above the minimum sampling interval.
6.The circbuffer will overwrite old data when buffer is full, so if users
don't read data soon, data will be lost, and the oldest data in circbuffer
are returned to the users.
7.Always read the last data in the circbuffer as initial value for new
users when the sensor device has not yet generated new data.
8.when user uses poll, if subscription interval is satisfied, the POLLIN
events is returned for each users.
9.When new user generate or the state of sensor device changed, the POLLPRI
will notify to all users.
10.Support multi advertisers to subscribe their own data as loop test.
Signed-off-by: Jiuzhu Dong <dongjiuzhu1@xiaomi.com>
1.cmd:SNIOC_REGISTER with struct sensor_reginfo_s to register user sensor
2.cmd:SNIOC_UNREGISTER to unregister user sensor
Signed-off-by: Jiuzhu Dong <dongjiuzhu1@xiaomi.com>
This adds a sensor driver for the hyt271, hyt221, and hyt939 sensor module from
vendor iST (Innovative Sensor Technology). This sensor type is connected via i2c
bus and allows the measurement of relative humidity and temperature.
Each driver instance supports two different character device for each type
(/dev/sensor/tempX and /dev/sensor/humiX).
This driver also supports changing the i2c address of one connected sensor on
the bus. This requires a callback to the platform-specific board logic which
must ensure a power-on reset.
Optional the driver allows setting up a read interval for fetching sensor data.
This is done by a worker thread and can be useful when watching several sensors
via poll() by the userspace application.
Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>
1.support for multi-user access
2.support special cmd to control sensor
3.support userspace to set size of intermediate buffer
by ioctl: SNOIC_SET_BUFFER_SIZE
Change-Id: I9ce3a65b88b12c28388ec397431f1a277b120c2a
Signed-off-by: dongjiuzhu <dongjiuzhu1@xiaomi.com>
This commit does two things:
1. First, it reorganizes the driver Kconfig files so that each is self contained. Before, a part of the driver configuration was in drivers/Kconfig and the rest was in in drivers/xyz/Konfig. Now, all of the driver configuration is consolitated in the latter.
2. Second, this commit correct numerous serious errors introduced in a previous reorganization of the driver Kconfig files. This was first noted by Nicholas Chin in PR270 for the case of the drivers/i2c/Kconfig but some examination indicates that the error was introduced into several other Kconfig files as well.
The nature of the introduced error was basically this:
- Nothing must intervene between the menuconfig selection and the following conditional configuration otpions.
- A previous PR erroneously introduced unconditional options between the menuconfig and the following confditional logic, thus corrupting the driver menus.
This error was easy to make because the driver Kconfig files were not well modularized. Making them fully self-contained should eliminate this kind of error in the future.
boards: cxd56xx: add SCU sensors
* drivers: platform: add Avago APDS9930 Proximity and Ambient light Sensor
This sensor is connected to the SCU on spresense board
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* drivers: spresense: add Rohm BH1721FVC Ambient Light Sensor
This sensor is connected to the SCU on spresense board
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* drivers: spresense: add Rohm BH1745NUC Color Sensor
This sensor is connected to the SCU on spresense board
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* drivers: spresense: add Rohm BM1383GLV/BM1383AGLV Pressure Sensor
This sensor is connected to the SCU on spresense board
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* drivers: spresense: add Rohm BM1422GMV/BM1422AGMV Magnetic Sensor
This sensor is connected to the SCU on spresense board
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* drivers: spresense: add Bosch BMI160 Sensor support
This sensor is connected to the SCU on spresense board
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* drivers: spresense: add Bosch BMP280 Barometic Pressure Sensor
This sensor is connected to the SCU on spresense board
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* drivers: spresense: add Kionix KX022/KX122 Acceleration Sensor
This sensor is connected to the SCU on spresense board
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* drivers: spresense: add Murata LT1PA01 Proximity and Ambient light Sensor
This sensor is connected to the SCU on spresense board
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* drivers: spresense: add Rohm RPR0521RS Proximity and Ambient light Sensor
This sensor is connected to the SCU on spresense board
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* drivers: sensors: bmi160: add optional I2C address
Add a menu option for the case when the SDO pin is pulled to VDDIO
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Approved-by: Gregory Nutt <gnutt@nuttx.org>
