There is a good case on sim platform:
When we input some cmd and click enter key to start application in terminal,
this context will change to application from IDLE loop. Althrough entey key '\r'
has been received to recv buffer and complete post semaphore of reader, but
pollnotify may not be called because context change. So when application run
poll function, because no events happend and poll enter wait, context will
again change to IDLE loop, this pollnotify of IDLE loop will run to send poll
events, poll function of applicaton will wake up. It's wrong!
Change-Id: I812a889f2e90781a9c3cb4b0251cccc4d32bebd1
Signed-off-by: dongjiuzhu <dongjiuzhu1@xiaomi.com>
Usage:
nsh> ifconfig
eth0 Link encap:Ethernet HWaddr 52:13:FF:FF:FF:FF at UP
inet addr:10.0.0.2 DRaddr:10.0.0.1 Mask:255.255.255.0
nsh> renew eth0 && ifconfig
eth0 Link encap:Ethernet HWaddr 52:13:FF:FF:FF:FF at UP
inet addr:192.168.1.42 DRaddr:192.168.1.254 Mask:255.255.255.0
CONFIG_NETDB_DNSCLIENT is needed for
apps/netutils/netinit/netinit.c:659: \
undefined reference to `netlib_set_ipv4dnsaddr'
Change-Id: I54b8495637baf0f3f28abf67d4d4ce861ef49ced
Bug: https://github.com/apache/incubator-nuttx/issues/1988
Forwarded: https://github.com/apache/incubator-nuttx/pulls/rzr
Signed-off-by: Philippe Coval <rzr@users.sf.net>
It was tested using:
nsh> ifconfig
eth0 Link encap:Ethernet HWaddr 52:13:FF:FF:FF:FF at DOWN
inet addr:10.0.0.2 DRaddr:10.0.0.1 Mask:255.255.255.0
All flags are needed to prevent build failures like:
chip/kinetis_enet.c:181:4:\
error: #error "Unrecognized or missing PHY selection"
netlib_setifstatus.c: In function 'netlib_ifup':
netlib_setifstatus.c:83:27: \
error: 'NETLIB_SOCK_TYPE' undeclared (first use in this function);
Change-Id: I9496528ae09f6244d73ab77dbcd307ced95f46fd
Bug: https://github.com/apache/incubator-nuttx/pull/1988
Forwarded: https://github.com/apache/incubator-nuttx/pull/2066
Signed-off-by: Philippe Coval <rzr@users.sf.net>
This will suppress a warning.
For some reason if declared weak,
it's not properly resolved at runtime,
this will need more investigations, any clues ?
Change-Id: I3cc3b7d145c7b32db20f5f2cbf4314ac20dba588
Forwarded: https://github.com/apache/incubator-nuttx/pulls/rzr
Signed-off-by: Philippe Coval <rzr@users.sf.net>
Also enable ifup, use USB console and create raw image.
Windows is not mandatory, I use linux as host
so defconfig can rely on defaults.
Change-Id: Ic0e5f79f28facb6eff1d9831bcb31e1ff329a5aa
Forwarded: https://github.com/apache/incubator-nuttx/pulls/rzr
Signed-off-by: Philippe Coval <rzr@users.sf.net>
Then it can easly deployed using USB masstorage
(same as on embed)
Forwarded: https://github.com/apache/incubator-nuttx/pulls/rzr
Change-Id: I62381d3f571fbc6e4716fa01d6974954f9193075
Signed-off-by: Philippe Coval <rzr@users.sf.net>
Summary:
- During streaming test, I noticed a dealock when controlling IRQ
- Actually, it will send an IPI when the cpu index is not 0
- However, up_cpu_pause() also sends IPI with critical section
- So the IRQ control must follow the same rule
Impact:
- Affects SMP only
Testing:
- Tested with spresense:wifi_smp
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary:
- I noticed that stack for the init task was filled almost 100%
- This commit fixes this issue
Impact:
- Affects spresense:wifi configuration only
Testing:
- Tested with renew/mount/wget/nxplayer commands
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary:
- This commit adjusts parameters for audio streaming
Impact:
- Only affects spresense:wifi and spresense:wifi_smp
Testing:
- Tested with nxplayer
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
and remove the special handling in the stack dump
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: Ia1ef9a427bd4c7f6cee9838d0445f29cfaca3998
1.Reduce the default size of task_group_s(~512B each task)
2.Scale better between simple and complex application
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: Ia872137504fddcf64d89c48d6f0593d76d582710
boards/arm/stm32/b-g474e-dpow1/scripts/ld.script.dfu:
* New file. Reserve up to 24KiB at the start of FLASH for a
bootloader.
boards/arm/stm32/b-g474e-dpow1/scripts/Make.defs:
* When building with CONFIG_STM32_DFU, use the new ld.script.dfu
to leave room in FLASH for a bootloader.
boards/arm/stm32/b-g474e-dpow1/README.txt:
* "FLASH Bootloader Support": New section.
Summary:
- This commit adds a wifi_smp configuration for spresense
- To avoid deadlock, gs2200m_irq_enable() and gs2200m_irq_disable()
release global spinlock if they are not called on CPU0.
Impact:
- Only affects spresense:wifi_smp
Testing:
- Tested with ostest, renew, smp, telnetd.
- NOTE: tcpserver might be unstable
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary:
- This commit refactors stm32_gs2200m.c
- gs2200m_irq_enable() and gs2200m_irq_disable() are now symmetric.
Impact:
- All use cases which use the gs2200m driver.
Testing:
- Tested with stm32f4discovery:wifi
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary:
- This commit refactors cxd56_gs2200m.c
- gs2200m_irq_enable() and gs2200m_irq_disable() are now symmetric.
Impact:
- All use cases which use the gs2200m driver.
Testing:
- Tested with spresense:wifi
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
sam_ili9488.c:1605:7: error: label 'errout_with_dmadog' used but not defined
bcmf_sdio.c:855:16: error: passing argument 1 of 'wd_start' from incompatible pointer type
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
to save the preserved space(1KB) and also avoid the heap overhead
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I694073f68e1bd63960cedeea1ddec441437be025
Change the preallocated message and descriptor from 32/24 to 4.
The total size is reduce from 1892 to 532
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I79d199465daef678986868f773876289859f42fc
boards: metro-m4 Add support for starting the watchdog timer on the metro-m4.
Testing:
- Build check only
Signed-off-by: Leomar Mateus Radke <leomar@falker.com.br>
since the maximum number of argument pass to wd_start in the whole
code base is 2 and change CONFIG_MAX_WDOGPARMS in some defconfig
from 1 to 2 oherwise pthread_condclockwait will fail
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: Ib6cb28b8c0722058849e7be916e164513431d21c
malloc() and free() should never be used within the OS. This will work in the FLAT build because there is only a single heap, but will cause problems in PROTECTED and KERNEL build modes where there are separate heaps for user and kernel memory.
Typically kmm_malloc(), kmm_zalloc(), and kmm_free() should be called within the kernel in those build modes to use the kernel heap.
Memory is never free. Possible memory leak:
./boards/arm/cxd56xx/common/src/cxd56_crashdump.c: pdump = malloc(sizeof(fullcontext_t));
Memory allocated with malloc(), but freed with kmm_free():
./drivers/usbhost/usbhost_composite.c: cfgbuffer = (FAR uint8_t *)malloc(CUSTOM_CONFIG_BUFSIZE);
Memory is never freed in these cases. It is allocated in the driver initialization logic, but there is no corresponding uninitialization logic; memory is not freed on error conditions:
./arch/arm/src/lc823450/lc823450_i2s.c: priv = (struct lc823450_i2s_s *)zalloc(sizeof(struct lc823450_i2s_s));
./arch/arm/src/sam34/sam_spi.c: spics = (struct sam_spics_s *)zalloc(sizeof(struct sam_spics_s));
./arch/arm/src/sama5/sam_spi.c: spics = (struct sam_spics_s *)zalloc(sizeof(struct sam_spics_s));
./arch/arm/src/samv7/sam_spi.c: spics = (struct sam_spics_s *)zalloc(sizeof(struct sam_spics_s));
Memory is allocated with zalloc() but freed on error conditions with kmm_free():
./arch/arm/src/sama5/sam_ssc.c: priv = (struct sam_ssc_s *)zalloc(sizeof(struct sam_ssc_s));
./arch/arm/src/samv7/sam_ssc.c: priv = (struct sam_ssc_s *)zalloc(sizeof(struct sam_ssc_s));
./arch/arm/src/stm32/stm32_i2s.c: priv = (struct stm32_i2s_s *)zalloc(sizeof(struct stm32_i2s_s));
Memory is never freed:
./drivers/spi/spi_bitbang.c: priv = (FAR struct spi_bitbang_s *)zalloc(sizeof(struct spi_bitbang_s));
Provide functions which get and set the 3A (Auto white balance/Auto
exposure/Auto
focus) parameters.
These are achieved by the ioctl request codes VIDIOC_G_EXT_CTRLS and
VIDIOC_S_EXT_CTRLS which have the following settings:
1. ctrl_class = V4L2_CTRL_CLASS_CAMERA
2. id = V4L2_CID_3A_PARAMETER
Also, provide function which get the 3A adjustment status.
This is achieved by the ioctl request codes VIDIOC_G_EXT_CTRLS which has the
following settings:
1. ctrl_class = V4L2_CTRL_CLASS_CAMERA
2. id = V4L2_CID_3A_STATUS
Fix the following three bugs about ON/OFF control of auto white balance and auto
exposure:
- The returned value of VIDIOC_G_CTRL with id = V4L2_CID_AUTO_WHITE_BALANCE is
different from V4L2 specification.
- Auto exposure is locked if auto white balance lock is requested.
- Auto exposure and auto white balance are locked if auto exposure lock is
requested.
Add imageproc_alpha_blend() to blend two images in a specified ratio.
The blended source image is selectable from the following two types:
- Single color image
- YUV422 image
The blend ratio is selectable from the following three types:
- Blend ratio with single value
- Blend ratio with 1bpp
- Blend ratio with 8bpp
Summary:
- Fix style violations in lc823450_syscontrol.h
Impact:
- This commit affects register naming in syscontrol.
- So some files such as lc823450_start.c lc823450_mux.c were also changed.
Testing:
- Build check only
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
- Add new functions of GNSS
- Support the lower PWM frequency
- Add CONFIG_CPUFREQ_RELEASE_LOCK
- Add high speed ADC support
- Add HPADC input gain configuration
- Add eMMC device
- Frame buffer support
- Fix SD/GNSS/sensor drivers not worked
- Build errors
- Fix nxstyle issues
- Add board specific logic to altair modem dirver
- Fix issue that SPI4 RX frequency violated AC Spec
- Remove dummy buffer in altair driver
- Fix priority of SPI transfer task is too low
- Remove unnecessary configuration
- Modify timeout value for RX ready
- Fix minor bugs
Kinetis: Reworked USB driver for setup out data phase.
Freedom K28: New config nshsdusb, with RNDIS support
PL2303: Try to avoid clone detection.
General: various nxstyle fixes
General: license changed
1.It make sense to let Toolchain.defs give the default value
2.The board can still change if the default isn't suitable
3.Avoid the same definition spread more than 200 Make.defs
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: Ic2649f1c7689bcf59c105ca8db61cad45b6e0e64
- makes nsh reboot command work
Squashed commit of the following:
commit 5193f6ae9623bfb4d3bed4ecf3d0fb9ae1bfb6e8
Author: Adam Feuer <adam@starcat.io>
Date: Thu Jul 16 16:41:54 2020 -0700
removed conflict tag that was missed
- result of an incorrectly fixed bad merge
commit 731108ea7495655e96e516448887ca8c9ab354d1
Author: Adam Feuer <adam@starcat.io>
Date: Thu Jul 16 16:12:30 2020 -0700
implement system reset to make nsh reboot work
Squashed commit of the following:
commit 245d155cc58d31af412f2b832877736b2088b896
Author: Adam Feuer <adam@starcat.io>
Date: Thu Jul 16 16:10:10 2020 -0700
add Kconfig setting for system reset
commit e7d5def8151821bf359c55c05ba1f59421b2371a
Author: Adam Feuer <adam@starcat.io>
Date: Thu Jul 16 15:51:35 2020 -0700
implement system reset to make nsh reboot work
Make.defs under board folder can still overwrite the default as needed
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I1c300a8ace4b54d475ef8d398661ed65ca273a2e
The QuickFeather board added as an initial target.
These featrues are minimally implemented:
* Clock Configuration -- All clocking registers are defined and
configuration is used to setup the HSO, M4 Core, and M4 Perif
clocks. Additionally some clock debugging is stubbed for
bringing out clock paths to IO pins.
* UART -- The lowputc as well as the serial driver is implemnted
for the single UART device. Currently the configuration is
hard coded, but uses the proper interfaces to later fill in.
* SysTick -- The system tick timer is implemented and clocking
properly. Tickless mode is not yet implemented.
* Interrupts -- The interrupt system is implemented and verified
using the UART and SysTick systems.
* GPIO -- GPIO and IOMUX systems are defined and implemented.
This is verified using the UART as well as the Arch LED
system. The GPIO interupt system is stubbed out but not
implemented.
* Arch LEDS -- The blue LED as part of the RGB LED is configured
and attached to the Arch LED system. This indicates the device
coming online as well as when a hardfault is triggered.
Applications and Testing:
* There is a nsh configuration implemented that includes debug
features as well as the ostest, getprime, and mem test.
All of these have been run and verified.
Signed-off-by: Brennan Ashton <bashton@brennanashton.com>
so all boards support uClibc++/libc++ automatically
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: Ibe6fafbec57f7acb26ea6188a3e9923ea82295c5
otherwise the user is shocked that using cin/cout/cerr will crash the system
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I453427261f3e2a6e60f7dd2398f7d3bd1043a0d5
since cxx initialization is controlled by CONFIG_HAVE_CXXINITIALIZE now
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I39438dc3006d0a0b810052ecef50cd3c92f09d83
The video stream driver must be intialized from the board to comply with NuttX
NOTE:
Please remove the initalization from any camera example
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
so the lower half driver don't need include the specific board.h
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: Icf6638a6865bac42150b5957376e55909f041d40
so the lower half driver don't need include the specific board.h
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I2ff5c30049a5c5e8ee90baea56e9f4cb1a8a4f87
stm32_i2sdev_initialize to stm32_i2sbus_initiliaze, to be consistent
with the way other buses are initialized.
The stm32_i2sdev_initiliaze (similar to stm32_spidev_initialize for
example) is a board specific function that does any necessary
initialization that's board depedent.
let toolchain decide the correct value base on the command line
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I342db6a88e4a161a322a8fea48a59e6ca7617ae6
This is a change suggested by Xiao Xiang in an email thread. Some make variables with depend on forking and shell and running a script to get the value of the variable. Using := we can force the calculation to occur only once. This leads to a small but consistent improvement in build performance.
This change really applies to ALL Make.defs files but is applied only to one here so that it can be thoroughly verified and possbily leveraged to other Make.defs files in the future.
boards/arm/stm32/b-g474e-dpow1/scripts/Make.defs:
* Apply the recent build script changes introduced in the
following git commits:
- 7e5b0f81e9 and
- e83c1400b6
to this board. Namely, factor the definitions of ARCHINCLUDES
and ARCHXXINCLUDES out of CONFIG_CYGWIN_WINTOOL conditional,
and use new build variable BOARD_DIR to simplify ARCHSCRIPT.
Add support for the STM32G474 family of microcontrollers and the
B-G474E-DPOW1 Discovery Board, which features a STM32G474RET6.
This is a major pull request as it adds support for an entirely
new family of STM32. This support is implemented in
arch/arm/src/stm32 and shares implementation with other STM32
families supported by that code, such as the 'L15xx, 'F10xx,
'F20xx, 'F3xxx, and 'F4xxx.
boards/Kconfig:
* Make NuttX recognize the existence of b-g474e-dpow1,
the B-G474E-DPOW1 Discovery Board.
boards/arm/stm32/b-g474e-dpow1/Kconfig:
boards/arm/stm32/b-g474e-dpow1/README.txt:
boards/arm/stm32/b-g474e-dpow1/configs/nsh/defconfig:
boards/arm/stm32/b-g474e-dpow1/include/board.h:
boards/arm/stm32/b-g474e-dpow1/scripts/Make.defs:
boards/arm/stm32/b-g474e-dpow1/scripts/ld.script:
boards/arm/stm32/b-g474e-dpow1/src/.gitignore:
boards/arm/stm32/b-g474e-dpow1/src/Make.defs:
boards/arm/stm32/b-g474e-dpow1/src/b-g474e-dpow1.h:
boards/arm/stm32/b-g474e-dpow1/src/stm32_appinit.c:
boards/arm/stm32/b-g474e-dpow1/src/stm32_autoleds.c:
boards/arm/stm32/b-g474e-dpow1/src/stm32_boot.c:
boards/arm/stm32/b-g474e-dpow1/src/stm32_userleds.c:
* Add minimal support for the B-G474E-DPOW1 Discovery
Board. The board boots successfully through to the
NSH prompt. NSH runs and is responsive.
With big thanks for detailed code review and suggestions:
David Sidrane (davids5)
Mateusz Szafoni (raiden00)
Abdelatif Guettouche (Ouss4)
- Remove old toolchain and buildroot support
- Enable builtin and add hello and renew commands
- Enable procfs and change name size to 24
- Enable stack coloration
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>>
Buffers are allocated in the main ram, which is suitable for use with the
underlying STM32H7 SDMMC1 core in IDMA mode.
Files are copied from stm32f7/nucleo-144.
NOTE: lpwork's priority has been changed from 30 to 60 to avoid an
error when calling getsockname() just after connect() in ftpc.c
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
