sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
34,083 Commits 1 Branch 0 Tags 291 MiB
7133f89cc2
Commit Graph

366 Commits

Author SHA1 Message Date
Gregory Nutt
30f1652b10 STM32F428i-DISCO: Change NxWM cursor character from 137 (graphics block) to 95 (underscore). NxWM is configured to use a 7-bit character set so 137 is not a valid character code. 2017-01-07 18:06:24 -06:00
Gregory Nutt
4d93c510bc STM32F429i-DISCO: Enable keyboard input in nxwm configuration. 2017-01-07 17:53:39 -06:00
Gregory Nutt
7a1cbdd13a Update README; increase stack sizes in STM32F429i-DISCO nxwm configuration (does not help) 2017-01-07 17:28:54 -06:00
Gregory Nutt
bc595aeec8 Update TODO list and a README file. 2017-01-07 14:00:39 -06:00
Gregory Nutt
1c182a0e0b Update README 2017-01-07 11:05:12 -06:00
Gregory Nutt
726ad7640e Update README 2017-01-07 10:51:17 -06:00
Gregory Nutt
e568253eb3 Update README, some comments, and fix some spacing. 2017-01-07 10:36:18 -06:00
Alan Carvalho de Assis
530ec2e967 STM32F429i Discovery: Add support for NxWM on STM32F429i-Disco board 2017-01-07 08:17:44 -06:00
Gregory Nutt
f063e4c5ac Remove Calypso architecture support and support for Calypso SERCOMM driver. 2016-12-13 18:35:52 -06:00
Gregory Nutt
d9e040d76b Remove all Calypso board configurations 2016-12-13 18:24:49 -06:00
Gregory Nutt
c83da3c48f Remove minnsh configurations and support logic: up_getc() and lowinstream. 
This was an interesting exercise to see just how small you could get NuttX, but otherwise it was not useful:  (1) the NSH code violated the OS interface layer by callup up_getc and up_putc directly, and (2) while waiting for character input, NSH would call up_getc() which would hog all of the CPU.  NOt a reasonably solution other than as a proof of concept.
 2016-12-13 18:01:23 -06:00
Gregory Nutt
55dd1c87b3 Remove all references to BOARDIOC_ADCSETUP 2016-12-05 15:31:40 -06:00
Gregory Nutt
b999e63c82 Remove some references to BOARDIOC_PWMTEST and board_pwm_setup(). Still lots more. 2016-12-05 13:54:12 -06:00
Gregory Nutt
c0cbea2550 Remove RGMP and RGMP drivers. 2016-12-02 09:49:33 -06:00
Gregory Nutt
fa03fa5ea9 Refresh more defconfig files 2016-12-01 17:07:54 -06:00
Gregory Nutt
86b5f3b9ed boardctl: Add new command to start the NX server as a kernel thread. Also refresh more configurations. 2016-12-01 15:05:57 -06:00
Gregory Nutt
6dda185e8a NX: Remove configuration CONFIG_NX_NXSTART. nx_start.c is now built unconditionally in multi-user mode. 2016-12-01 13:30:24 -06:00
Beat Küng
c7da88e383 CXXFLAGS: add -fcheck-new whenever -fno-exceptions is used 
This is to avoid GCC to optimize null-pointer checks away, in case the
default operator new is used together with -fno-exceptions.
 2016-08-22 08:35:01 +02:00
Gregory Nutt
b071e4ce92 Refresh all STM32, EFM32, and SAMV7 configurations for SPI H/W features configuration changes 2016-08-08 12:50:14 -06:00
Gregory Nutt
f43ded46e6 Rename arch/sh to arch/renesas, cont'd 2016-08-06 14:03:38 -06:00
Gregory Nutt
10fff9011a Move include/nuttx/configdata.h to include/nuttx/mtd/configdata.h 2016-07-21 13:34:54 -06:00
Gregory Nutt
6f9a536ae8 Disable DEBUG features be default in all configurations 2016-07-07 15:58:26 -06:00
Gregory Nutt
a897fd4ccf Eliminate use of apps/system/usbmonitor. Use drivers/usbmonitor instead. 2016-06-30 13:09:22 -06:00
Gregory Nutt
7c34a77b54 Move apps/system/usbmonitor to nuttx/drivers/usbmonitor 2016-06-30 12:24:33 -06:00
Gregory Nutt
2a19e16eb0 libc/hex2bin: Move the portable library portion of apps/system/hex2bin to nuttx/libc/hex2bin where it can be shared with the OS internals. 2016-06-27 11:22:38 -06:00
Gregory Nutt
1377452394 Refresh all ARM configurations 2016-06-23 15:59:14 -06:00
Gregory Nutt
5118264e6c Rename CONFIG_SYSLOG_CONSOLE to CONFIG_CONSOLE_SYSLOG 2016-06-21 09:35:51 -06:00
Gregory Nutt
43eb04bb8f Without lowsyslog() *llinfo() is not useful. Eliminate and replace with *info(). 2016-06-20 11:59:15 -06:00
Gregory Nutt
2b445ddccc Remove lowsyslog(). The new syslog() includes all of the functionality of lowsyslog(). No longer any need for two interfaces. 2016-06-20 08:57:08 -06:00
Gregory Nutt
5b2aa7bf99 Remove all traces of CONFIG_SYSLOG 2016-06-19 13:59:43 -06:00
Gregory Nutt
03cbe671ad Centralize definitions associated with CONFIG_DEBUG_PWM 2016-06-15 17:23:56 -06:00
Gregory Nutt
63b1eb09e6 Centralize definitions associated with CONFIG_DEBUG_CAN 2016-06-15 15:45:27 -06:00
Gregory Nutt
6d9a0511ad Rename CONFIG_DEBUG_HEAP to CONFIG_HEAP_COLORATION 2016-06-15 14:48:06 -06:00
Gregory Nutt
2ddd57c674 Centralize definitions associated with CONFIG_DEBUG_LEDS 2016-06-15 14:12:19 -06:00
Gregory Nutt
24c51ec1ff Centralize definitions associated with CONFIG_DEBUG_LCD 2016-06-15 11:40:33 -06:00
Gregory Nutt
ba03134bed Centralize definitions associated with CONFIG_DEBUG_SPI 2016-06-15 10:41:13 -06:00
Gregory Nutt
b0458e36da configs/: Remove references to non-existent SPI_VERBOSE setting 2016-06-12 17:57:12 -06:00
Gregory Nutt
a5457987d8 configs/: Change some err() ERRORS to warn() WARNINGS or info() 2016-06-12 17:02:46 -06:00
Gregory Nutt
a1469a3e95 Add CONFIG_DEBUG_ERROR. Change names of *dbg() * *err() 2016-06-11 15:50:49 -06:00
Gregory Nutt
e99301d7c2 Rename *lldbg to *llerr 2016-06-11 14:55:27 -06:00
Gregory Nutt
1cdc746726 Rename CONFIG_DEBUG to CONFIG_DEBUG_FEATURES 2016-06-11 14:14:08 -06:00
Gregory Nutt
fc3540cffe Replace all occurrences of vdbg with vinfo 2016-06-11 11:59:51 -06:00
Gregory Nutt
3a74a438d9 Rename CONFIG_DEBUG_VERBOSE to CONFIG_DEBUG_INFO 2016-06-11 11:50:18 -06:00
Gregory Nutt
910bac65fa STM32 Timer: Generalize and extend calculation of per-timer pre-scaler value. Inspired by original proposal from Pierre-noel Bouteville. 2016-06-03 11:38:59 -06:00
Gregory Nutt
d76d889efd Restore FLASH_ERASALL in configurations where it was previously selected 2016-06-03 09:10:21 -06:00
Gregory Nutt
2b47473778 Remove all references to CONFIG_SYSTEM_FLASH_ERASEALL 2016-06-02 10:19:02 -06:00
Gregory Nutt
d89eefc6a5 Refresh all STM32 configurations 2016-05-25 12:39:28 -06:00
Gregory Nutt
9ec104834a Remove CONFIG_USARTn_ISUART 2016-05-25 11:21:48 -06:00
Gregory Nutt
c089a2f241 Rename CONFIG_ARCH_HAVE_OTHER_UART to CONFIG_OTHER_UART_SERIALDRIVER 2016-05-25 10:48:33 -06:00
Gregory Nutt
e2e6ce3f1b Rename CONFIG_ARCH_HAVE_SCIn to CONFIG_SCIn_SERIALDRIVER 2016-05-25 10:46:55 -06:00
Gregory Nutt
2a87741e72 Rename CONFIG_ARCH_HAVE_UARTn to CONFIG_UARTn_SERIALDRIVER 2016-05-25 10:45:01 -06:00
Gregory Nutt
249a2e48e5 Rename CONFIG_ARCH_HAVE_USARTn to CONFIG_USARTn_SERIALDRIVER 2016-05-25 10:39:23 -06:00
Gregory Nutt
4b3e710af6 Add an argument to board_app_initialize() 2016-05-24 10:51:22 -06:00
Marco Krahl
3537f93cfb stm32f429i-disco: Set default spi clock frequency for display initializing 2016-04-22 07:28:21 -06:00
Gregory Nutt
46846c0c24 Framebuffer driver: Add a display number to each interface in order to support multiple displays 2016-04-14 12:23:15 -06:00
Gregory Nutt
3228d32938 Correct permmisions on executable scripts 2016-04-10 09:11:59 -06:00
Gregory Nutt
51bed92fc2 STM32F429i-disco: Add uVision GCC IDE project files 2016-04-10 09:11:56 -06:00
Kha Vo
7689de230b STM32F29i-disco: Add uVision GCC IDE template files for the STM32F429i Discovery 2016-04-10 09:11:56 -06:00
Gregory Nutt
7337e748de Merge in configs/ submodule 2016-04-10 07:57:59 -06:00
Gregory Nutt
99df0f459d All STM32 configurations need to set CONFIG_ARM_TOOLCHAIN_GNU=y 2016-04-02 07:21:25 -06:00
Gregory Nutt
ad61b7ab3e Remove all references to CONFIG_SYSTEM_SDCARD 2016-03-30 17:53:19 -06:00
Gregory Nutt
76c4b11a6b PM: Add domain to all PM interfaces. Internal PM data structures now handle multiple PM domains. 2016-03-27 13:02:21 -06:00
Gregory Nutt
0e8ff50d18 PM: Add activity domain to all PM callbacks 2016-03-27 11:18:44 -06:00
Gregory Nutt
423fe999b6 Add configuration files that have CONFIG_CDCACM=y (and not CONFIG_CDCACM_COMPOSITE) must have CONFIG_LIB_BOARDCTL=y and CONFIG_BOARD_USBDEVCTRL=y 2016-03-25 12:39:28 -06:00
Gregory Nutt
4b1c510f6f Refresh all STM32 configurations 2016-03-08 17:03:32 -06:00
Paul A. Patience
ecbf20065c STM32F429I-Disco: Update STM32_RCC_DCKCFGR_PLLSAIDIVR 2016-03-01 10:11:21 -05:00
Gregory Nutt
f5c987a627 Change name IMX to IMX1 in configuration variable names to make room for i.MX6 2016-02-28 15:19:19 -06:00
Gregory Nutt
12c14ee718 Rename CONFIG_WIRELESS to CONFIG_DRIVERS_WIRELESS 2016-02-26 16:45:29 -06:00
Kha Vo
c71ed665c2 On stm32F2xx gpio is encoded to 20bits but the button definitions use 16bit type. 2016-02-25 11:12:27 -06:00
Gregory Nutt
1699561bb6 Replace irqsave() with enter_critical_section(); replace irqrestore() with leave_critical_section() 2016-02-13 12:37:46 -06:00
Gregory Nutt
9ed7d56a18 Building of xyz_appinit.c should depend on CONFIG_LIB_BOARDCTL, not CONFIG_NSH_ARCHINITIALIZE 2016-02-04 12:14:17 -06:00
Gregory Nutt
36bb11d77c Rename files containing board_app_initialize from xyz_nsh.c to xyz_appinit.c 2016-02-04 12:03:09 -06:00
Gregory Nutt
bfe51e3bc7 Move xyz_cxxinitialize.c from nuttx/configs/abc/src to apps/platform/abc/ (where xyz is the processor family and abc is the board) 2016-01-29 11:35:48 -06:00
Gregory Nutt
656e730f8f apps/system/ramtron has been removed. 2016-01-27 10:39:30 -06:00
Gregory Nutt
9f2a839ac3 For STM32 boards, rename up_spiinitialize to stm32_spibus_initialize 2016-01-26 12:21:39 -06:00
Gregory Nutt
de50bc82a7 Remove CONFIG_SPI_OWNBUS: Now it is not just a good idea, it is the law 2016-01-23 18:21:36 -06:00
Gregory Nutt
9535c909d3 Rename CONFIG_SYSTEM_INIFILE to CONFIG_FSUTILS_INIFILE 2016-01-20 17:11:48 -06:00
Gregory Nutt
004f4b8896 All bash scripts should be marked executable 2016-01-15 07:54:27 -06:00
Gregory Nutt
2a5bdf230c Merge remote-tracking branch 'origin/master' into windeps 2016-01-09 16:38:13 -06:00
Gregory Nutt
9e548d34c3 mkdeps.sh and mkdeps.bat have been deleted. All configurations must now use the compiler mkeps prograqm 2016-01-09 16:06:15 -06:00
Gregory Nutt
e46cd30c14 Change use of mknulldeps.sh to mkwindeps.sh 2016-01-09 14:13:44 -06:00
Gregory Nutt
b90f5ba7f4 Remove CONFIG_DISCRETE_IO from all defconfig files 2015-12-15 08:41:10 -06:00
Gregory Nutt
c41449b12a Rename CONFIG_ARMV7M_MPU to CONFIG_ARM_MPU so that we can reuse the configuration settings for the ARMV7R MPU 2015-12-14 13:56:56 -06:00
Gregory Nutt
dde6ba85a3 STM32F429i Discovery uses CCM procfs and so needs FS_PROCFS_REGISTER=y 2015-12-01 15:03:39 -06:00
Gregory Nutt
651bd9e8ad Rename CONFIG_LOOP to CONFIG_DEV_LOOP 2015-11-25 17:11:27 -06:00
Gregory Nutt
175d248af1 Refresh all configurations that have SMARTFS enabled. They should have MKSMARTFS enabled for backward compatibility. 2015-11-23 11:20:47 -06:00
Gregory Nutt
faa9f50e53 Fix several build errors detected by tools/testbuil.sh, most configuration problems 2015-11-18 14:35:08 -06:00
Alan Carvalho de Assis
0a3d0ec1f5 configs/stm32f429i-disco/src/stm32_nsh.c file calculated partition boundries based on page block sizes but mtd_partition is expecting calculations based on erase block size. From Alan Carvalho de Assis. 2015-11-16 10:44:54 -06:00
Gregory Nutt
c8ee1c2061 STM32F429i-Discovery: Need to add pin disambiguation due to changes to pinmap header files 2015-11-01 17:40:30 -06:00
Gregory Nutt
b28bd72a48 Standardize naming of user LEDs interface functions 2015-11-01 12:45:58 -06:00
Gregory Nutt
f56ed529e5 Remove prototypes for all user LED interfaces from board.h header files 2015-11-01 10:53:34 -06:00
Gregory Nutt
893bd9c7b5 Rename board_led_off to board_autoled_off 2015-11-01 09:10:08 -06:00
Gregory Nutt
78f19bbefb Rename board_led_on to board_autoled_on 2015-11-01 09:07:36 -06:00
Gregory Nutt
88c506d843 Rename board_led_initialize to board_autoled_initiaize 2015-11-01 09:03:01 -06:00
Gregory Nutt
2b88bc7119 Standardize the width of all comment boxes in C header files 2015-10-03 07:41:15 -06:00
Gregory Nutt
f696caa6f4 Standardize the width of all comment boxes in C files 2015-10-03 07:25:23 -06:00
Gregory Nutt
e6e46f830b Standardize the width of all comment boxes in C files 2015-10-02 17:43:08 -06:00
Gregory Nutt
37111e6b2c Eliminate warnings 2015-09-08 10:19:34 -06:00
Paul A. Patience
55d8aee826 Simplify configs/ Makefiles by combining common longic into a new board.mk Makefile fragment. For Paul A. Patience" 2015-09-04 16:42:34 -06:00
Paul A. Patience
81268bb75c Add -Wundef warning flag 2015-09-01 13:19:57 -04:00
Gregory Nutt
f7ba1b1eeb Remove all references to the dedunct CONFIG_SYSTEM_SYSINFO configuration from all defconfig files 2015-07-04 15:19:11 -06:00
Gregory Nutt
d1ab9c2e0a Remove the configs/ directory 2015-06-29 13:12:29 -06:00
Gregory Nutt
7214e52fb2 Fix references to the no-longer-existent misc/ directory in comments, README files, and documentation 2015-06-28 08:08:57 -06:00
Gregory Nutt
342f5fe33d Fix references to the no-longer-existent misc/ directory in comments, README files, and documentation 2015-06-28 08:08:57 -06:00
Gregory Nutt
add36cc3de Add an option to disable support for long long formats in lib_vsprintf. From Alan Carvalho de Assis 2015-05-30 10:00:54 -06:00
Gregory Nutt
fce87336a4 Add an option to disable support for long long formats in lib_vsprintf. From Alan Carvalho de Assis 2015-05-30 10:00:54 -06:00
Gregory Nutt
d468285739 Rename usbhost_storageinit() to usbhost_msc_initialize(). Add calls to usbhost_cdcacm_initialize() is CONFIG_USBHOST_CDCACM is selected. 2015-05-06 14:11:29 -06:00
Gregory Nutt
691d7c9819 Rename usbhost_storageinit() to usbhost_msc_initialize(). Add calls to usbhost_cdcacm_initialize() is CONFIG_USBHOST_CDCACM is selected. 2015-05-06 14:11:29 -06:00
Gregory Nutt
5f992dd1a9 STM32F429i-Disco: Add some missing USB host configureation. Fix some some duplicate class registration that causes infinite loops in USB registry searches 2015-04-30 13:01:29 -06:00
Gregory Nutt
4d5fae4ea9 STM32F429i-Disco: Add some missing USB host configureation. Fix some some duplicate class registration that causes infinite loops in USB registry searches 2015-04-30 13:01:29 -06:00
Gregory Nutt
119bd7fe8a USB HUB: Update all USB host connection waiter application threads to use the the new connection interface 2015-04-28 12:21:23 -06:00
Gregory Nutt
7042225a8a USB HUB: Update all USB host connection waiter application threads to use the the new connection interface 2015-04-28 12:21:23 -06:00
Gregory Nutt
3233c043f2 Add logic to register the hub class to all board logic that initialize USB host 2015-04-28 11:53:26 -06:00
Gregory Nutt
1441689cc9 Add logic to register the hub class to all board logic that initialize USB host 2015-04-28 11:53:26 -06:00
Gregory Nutt
88908dd61e Use menconfig instead of config 2015-04-17 07:38:33 -06:00
Gregory Nutt
9f0a9824bc Use menconfig instead of config 2015-04-17 07:38:33 -06:00
Gregory Nutt
ff7d5d23e9 STM32F429i Disco: (1) Fix a bad return value if the LCD driver is already initialized. (2) The LCD driver initialization is now performed during the early boot sequence. (3) Increased the size of the message queue from 32 to 64 in the lcd configuration. From Marco, ocram.lhark@yahoo.com. 2015-04-17 07:04:53 -06:00
Gregory Nutt
41d5828fa7 STM32F429i Disco: (1) Fix a bad return value if the LCD driver is already initialized. (2) The LCD driver initialization is now performed during the early boot sequence. (3) Increased the size of the message queue from 32 to 64 in the lcd configuration. From Marco, ocram.lhark@yahoo.com. 2015-04-17 07:04:53 -06:00
Gregory Nutt
77393de102 Add support for the new DMA2D features to the STM32F429i-Disco LTDC configuration. From Marco Krahl. 2015-04-16 09:11:53 -06:00
Gregory Nutt
eb28a666b4 Add support for the new DMA2D features to the STM32F429i-Disco LTDC configuration. From Marco Krahl. 2015-04-16 09:11:53 -06:00
Gregory Nutt
68a97a53ac Make some file section headers more consistent with standard 2015-04-08 09:15:17 -06:00
Gregory Nutt
54847a163f Make some file section headers more consistent with standard 2015-04-08 09:15:17 -06:00
Gregory Nutt
f73fdd90c9 More renaming: up_lcdinitialize->board_lcd_initialize, up_lcdgetdev->board_lcd_getdev, up_lcduninitialize->board_lcd_uninitialize 2015-04-04 11:49:15 -06:00
Gregory Nutt
02beb0d449 More renaming: up_lcdinitialize->board_lcd_initialize, up_lcdgetdev->board_lcd_getdev, up_lcduninitialize->board_lcd_uninitialize 2015-04-04 11:49:15 -06:00
Gregory Nutt
15b90de919 NSH initialization now calls boardctl(BOARDIOC_INIT) instead of board_app_initaliaze. Modify all configurations: Make sure that CONFIG_LIB_BOARDCTL=y appears wherever CONFIG_NSH_ARCHINIT=y appears. Remove support for CONFIG_NSH_ARCHMAC. It is not used and there are better ways to do that operation 2015-03-31 12:14:16 -06:00
Gregory Nutt
4a8e0e2359 NSH initialization now calls boardctl(BOARDIOC_INIT) instead of board_app_initaliaze. Modify all configurations: Make sure that CONFIG_LIB_BOARDCTL=y appears wherever CONFIG_NSH_ARCHINIT=y appears. Remove support for CONFIG_NSH_ARCHMAC. It is not used and there are better ways to do that operation 2015-03-31 12:14:16 -06:00
Gregory Nutt
103a17d4f1 Rename arch_nshinitialize() to board_app_initialize() 2015-03-31 10:21:31 -06:00
Gregory Nutt
9c0441e2da Rename arch_nshinitialize() to board_app_initialize() 2015-03-31 10:21:31 -06:00
Gregory Nutt
7583c94252 Move board_ prototypes from arch.h to board.h 2015-02-27 20:02:03 -06:00
Gregory Nutt
12d61531aa Move board_ prototypes from arch.h to board.h 2015-02-27 20:02:03 -06:00
Gregory Nutt
42327117a3 configs/: board function prototypes are now in include/nuttx/board.h. Remove from board header file; Add inclusion of nuttx/board.h to all files referencing board functions 2015-02-27 18:49:24 -06:00
Gregory Nutt
f75184b5ac configs/: board function prototypes are now in include/nuttx/board.h. Remove from board header file; Add inclusion of nuttx/board.h to all files referencing board functions 2015-02-27 18:49:24 -06:00
Gregory Nutt
aaabd05bfc RTC: Remove all backdoor interfaces from rtc.h 2015-02-13 08:41:34 -06:00
Gregory Nutt
3724a5e98e RTC: Remove all backdoor interfaces from rtc.h 2015-02-13 08:41:34 -06:00
Gregory Nutt
aff4c9cfd0 stm32f429i-disco: change ltdc initializing during boot up. This moves initializing of the ili9341 lcd and ltdc driver to the board specific initializing routine. 
Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>
 2014-12-29 09:50:36 -06:00
Gregory Nutt
3a5571da63 stm32f429i-disco: change ltdc initializing during boot up. This moves initializing of the ili9341 lcd and ltdc driver to the board specific initializing routine. 
Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>
 2014-12-29 09:50:36 -06:00
Gregory Nutt
868d4b7afc STM32F429i-Disco USB: Strangeness: Conditioned on OTGHS but called otgfs initialize routines. Must be something broken 2014-12-29 07:02:32 -06:00
Gregory Nutt
a99f6c2061 STM32F429i-Disco USB: Strangeness: Conditioned on OTGHS but called otgfs initialize routines. Must be something broken 2014-12-29 07:02:32 -06:00
Gregory Nutt
217f3fec70 STM32F429i-Disco USBMC configuration: SPI1 should not be enabled. It is not supported 2014-12-29 07:01:36 -06:00
Gregory Nutt
715ea79555 STM32F429i-Disco USBMC configuration: SPI1 should not be enabled. It is not supported 2014-12-29 07:01:36 -06:00
Gregory Nutt
0d33717de4 STM32F429-Disco: Refresh five configurations, turning off DEBUG 2014-12-28 14:04:53 -06:00
Gregory Nutt
338d76d84b STM32F429-Disco: Refresh five configurations, turning off DEBUG 2014-12-28 14:04:53 -06:00
Gregory Nutt
56340ae971 STM32 LTDC: Move ltdc.h from include/nuttx/video to arch/arm/include/stm32; Trivial updates after general review 2014-12-19 14:52:17 -06:00
Gregory Nutt
fa5dffbc18 STM32 LTDC: Move ltdc.h from include/nuttx/video to arch/arm/include/stm32; Trivial updates after general review 2014-12-19 14:52:17 -06:00
Gregory Nutt
6194fed86b Stuff that goes along with the new LTDC README file 2014-12-19 14:14:41 -06:00
Gregory Nutt
31a0e8ac5e Stuff that goes along with the new LTDC README file 2014-12-19 14:14:41 -06:00
Gregory Nutt
e63730e995 stm32f429i-disco: add default platform configuration to test framebuffer support for the ltdc 
Memory configuration:

The heap start address of memory region 3 starts at 0xD0000000.
The allocated framebuffer of the layers is addressed up to the end of the memory
region 3.

If the layer pixel format changes e.g. from RGB565 to RGB24, than the memory
configuration must be configured too. Currently an easy memory calculation
is missing for that in Kconfig.

Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>
 2014-12-19 14:08:59 -06:00
Gregory Nutt
1ff469af5f stm32f429i-disco: add default platform configuration to test framebuffer support for the ltdc 
Memory configuration:

The heap start address of memory region 3 starts at 0xD0000000.
The allocated framebuffer of the layers is addressed up to the end of the memory
region 3.

If the layer pixel format changes e.g. from RGB565 to RGB24, than the memory
configuration must be configured too. Currently an easy memory calculation
is missing for that in Kconfig.

Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>
 2014-12-19 14:08:59 -06:00
Gregory Nutt
78ff2450cb stm32f429i-disco: initialize ltdc during bootup 
Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>
 2014-12-19 14:05:19 -06:00
Gregory Nutt
8d6614b9af stm32f429i-disco: initialize ltdc during bootup 
Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>
 2014-12-19 14:05:19 -06:00