When HAVE_HSI_CONTROL, adc_reset_hsi_disable() calls adc_reset()
followed by adc_shutdown() and this combination is called before
adc_setup() by upper level ADC driver. Without this patch,
priv->initialized wraps from 0 to 255 in this case.
Signed-off-by: Juha Niskanen <juha.niskanen@haltian.com>
arch/arm/src/tiva/hardware/cc13x2_cc26x2/cc13x2_cc26x2_adi3_refsys.h:
* Fix syntax error. The define ADI3_REFSYS_DCDCCTL0_VDDR_TRIM_MIN
had an unintentional comment closing "*/" in the middle of its
name.
This separation allows to interact with the watchdog from OS code,
for example initiating the watchdog very early on boot. Moreover,
these changes make the lower-half driver support an already running
watchdog, which may happen if there's a bootloader which already
started it.
Summary:
- This commit fixes kernel stack dump information
Impact:
- Affects armv7-a with kernel build
Testing:
- Built with sama5d4-ek:knsh
- Not tested
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary:
- Apply the same logic for armv7-m
- NOTE: stack pointer alignment is 4-byte
Impact:
- Affects armv6-m with interrupt stack enabled
Testing:
- Built with freedom-kl25z:nsh (CONFIG_ARCH_INTERRUPTSTACK=2048)
- Not tested but should work
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary:
- Apply the same logic for armv7-m
- NOTE: stack pointer alignment is 8-byte
Impact:
- Affects armv8-m with interrupt stack enabled
Testing:
- Not tested but should work
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary:
- Apply the same logic for armv7-a
- NOTE: stack pointer alignment is 8-byte
Impact:
- Affects armv7-r with interrupt stack enabled
Testing:
- Not tested but should work
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary:
- Apply the same logic for armv7-a
- NOTE: stack pointer alignment is 4-byte
Impact:
- Affects arm (arm7/9) and c5471 with interrupt stack enabled
Testing:
- Built with c5471evm.nsh (CONFIG_ARCH_INTERRUPTSTACK=2048)
- Built with ea3131:nsh (CONFIG_ARCH_INTERRUPTSTACK=2048)
- Not tested but should work
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary:
- Remove -4/-8 offset coding in imx_irq.c and arm_vectors.S
- Instead, add SP adjustment after calling setirqstack/setfiqstack
- Fix off-by-one irq/fiq stack allocation in 8-byte aligned arch
- Fix comments on the user stack pointer in arm_vectors.S
- Also, fix up_dumpstate() to extract the user stack pointer
- NOTE: stack pointer alignment is 8-byte
Impact:
- Affects armv7-a with interrupt stack enabled
Testing:
- Tested with sabre-6quad:smp with QEMU
- Tested with sabre-6quad:nsh with QEMU
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary:
- This commit fixes CPUx IDLE stack top for SMP
- Also removes SMP_STACK_TOP from smp.h
Impact:
- Affects armv7-a SMP only
Testing:
- Tested with sabre-6quad:smp (QEMU)
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
There is a good case on sim platform:
When we input some cmd and click enter key to start application in terminal,
this context will change to application from IDLE loop. Althrough entey key '\r'
has been received to recv buffer and complete post semaphore of reader, but
pollnotify may not be called because context change. So when application run
poll function, because no events happend and poll enter wait, context will
again change to IDLE loop, this pollnotify of IDLE loop will run to send poll
events, poll function of applicaton will wake up. It's wrong!
Change-Id: I812a889f2e90781a9c3cb4b0251cccc4d32bebd1
Signed-off-by: dongjiuzhu <dongjiuzhu1@xiaomi.com>
