pass ltp sigaction case 19-5.c, 23-5,c and 28-5.c.
When SIGCONT is dispatched, resume all members of the task group.
So there is nothing do in default action.
Signed-off-by: fangxinyong <fangxinyong@xiaomi.com>
1. Update all CMakeLists.txt to adapt to new layout
2. Fix cmake build break
3. Update all new file license
4. Fully compatible with current compilation environment(use configure.sh or cmake as you choose)
------------------
How to test
From within nuttx/. Configure:
cmake -B build -DBOARD_CONFIG=sim/nsh -GNinja
cmake -B build -DBOARD_CONFIG=sim:nsh -GNinja
cmake -B build -DBOARD_CONFIG=sabre-6quad/smp -GNinja
cmake -B build -DBOARD_CONFIG=lm3s6965-ek/qemu-flat -GNinja
(or full path in custom board) :
cmake -B build -DBOARD_CONFIG=$PWD/boards/sim/sim/sim/configs/nsh -GNinja
This uses ninja generator (install with sudo apt install ninja-build). To build:
$ cmake --build build
menuconfig:
$ cmake --build build -t menuconfig
--------------------------
2. cmake/build: reformat the cmake style by cmake-format
https://github.com/cheshirekow/cmake_format
$ pip install cmakelang
$ for i in `find -name CMakeLists.txt`;do cmake-format $i -o $i;done
$ for i in `find -name *\.cmake`;do cmake-format $i -o $i;done
Co-authored-by: Matias N <matias@protobits.dev>
Signed-off-by: chao an <anchao@xiaomi.com>
Signal must be masked when it is delivered to a signal handler per:
https://pubs.opengroup.org/onlinepubs/007904875/functions/sigaction.html:
When a signal is caught by a signal-catching function installed by sigaction(), a new signal mask is calculated and installed for the duration of the signal-catching function (or until a call to either sigprocmask() or sigsuspend() is made). This mask is formed by taking the union of the current signal mask and the value of the sa_mask for the signal being delivered [XSI] [Option Start] unless SA_NODEFER or SA_RESETHAND is set, [Option End] and then including the signal being delivered. If and when the user's signal handler returns normally, the original signal mask is restored.
Any action queued for that signal while the signal is masked should be deferred. It should go into the group pending signal list and should not be processed until until the signal is unmasked (which should occur when the signal handler returns).
Refer to issue #8867 for details and rational.
Convert sigset_t to an array type so that more than 32 signals can be supported.
Why not use a uin64_t?
- Using a uin32_t is more flexible if we decide to increase the number of signals beyound 64.
- 64-bit accesses are not atomic, at least not on 32-bit ARMv7-M and similar
- Keeping the base type as uint32_t does not introduce additional overhead due to padding to achieve 64-bit alignment of uin64_t
- Some architectures still supported by NuttX do not support uin64_t
types,
Increased the number of signals to 64. This matches Linux. This will support all xsignals defined by Linux and also 32 real time signals (also like Linux).
This is is a work in progress; a draft PR that you are encouraged to comment on.
The _unmasked_ signal action was never added if the task is in system call
and waiting for (a different) signal.
This fixes deliver especially for default signal actions / unmaskable
signals, like SIGTERM.
As far as I can interpret how signal delivery should work when the signal
is blocked, it should still be sent to the pending queue even if the signal
is masked. When the sigmask changes it will be delivered.
The original implementation did not add the pending signal action, if
stcb->task_state == TSTATE_WAIT_SIG is true.
An attempt to patch this was made in #8563 but it is insufficient as it
creates an issue when the task is not waiting for a signal, but is in
syscall, in this case the signal is incorrectly queued twice.
Remove calls to the userspace API exit() from the kernel. The problem
with doing such calls is that the exit functions are called with kernel
mode privileges which is a big security no-no.
For some reason the signal action was never performed if the receiveing
task was within a system call, the pending queue inser was simply missing.
This fixes the issue.
When the signal sent by the sender is blocked in the target task,
if the target task has an action registered with sa_flags SA_KENELHAND,
it will directly respond to the action in the context of the sender.
When the action is executed, it will have the parameters set by the
target task with sigaction:sa_user.
Signed-off-by: dongjiuzhu1 <dongjiuzhu1@xiaomi.com>
It takes about 10 cycles to obtain the task list according to the task
status. In most cases, we know the task status, so we can directly
add the task from the specified task list to reduce time consuming.
It takes about 10 cycles to obtain the task list according to the task
status. In most cases, we know the task status, so we can directly
delete the task from the specified task list to reduce time consuming.
There one ways can caused this:
mq_timedreceive
TIMER IRQ do wd_timer -> wd_func1 mq_send
-> wd_func2 nxmq_rcvtimeout -> crash
Resolve:
Stop the watchdog when mq_send
Signed-off-by: ligd <liguiding1@xiaomi.com>
because not all compiler support the weak attribute, and
many features are either always used or guarded by config.
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
For example, task is blocked by nxsem_wait(sem1), use nxsem_wait(sem2)
in signal handler, and take sem2 successfully, after exit from signal
handler to task, nxsem_wait(sem1) returns OK, but the correct result
should be -EINTR.
Signed-off-by: Zeng Zhaoxiu <zhaoxiu.zeng@gmail.com>
Summary:
- This commit introduces a private spinlock in sig_action.c
Impact:
- None
Testing:
- Tested with spresense:wifi_smp and spresense:wifi
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
pthread_exit will be called recursive when pthread_cancel
or other cleanup operation with syscalls that support
cancellation, to avoid this by mark current tcb flag as
TCB_FLAG_CANCEL_DOING instead of TCB_FLAG_CANCEL_PENDING.
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
Drop to user-space in kernel/protected build with up_pthread_exit,
now all pthread_cleanup functions executed in user mode.
* A new syscall SYS_pthread_exit added
* A new tcb flag TCB_FLAG_CANCEL_DOING added
* up_pthread_exit implemented for riscv/arm arch
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
