sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
5,708 Commits 1 Branch 0 Tags 291 MiB
71c289ce4f
Commit Graph

75 Commits

Author SHA1 Message Date
Gregory Nutt
71c289ce4f Rename all architecture files of form xyz_internal.h to just xyz.h 2015-12-29 18:07:11 -06:00
Gregory Nutt
68cc2ecfd2 ATMEGA2560: Most cosmetic changes from review of pull request 2015-12-29 13:02:20 -06:00
Dimitry Kloper
3c0c90e07d Minor identation fix 2015-12-29 19:09:20 +02:00
Dimitry Kloper
3746305f12 AVR: Minor adapt to a differnt TIMER IRQ notions for Atmega2560 2015-12-29 19:08:13 +02:00
Dimitry Kloper
99aab135b2 AVR: Make setting of XDIV optional for platforms that support it 
Put setting of XDIV into ifdef since not AVR platforms support it.
 2015-12-29 18:56:12 +02:00
Dimitry Kloper
462307f4b7 AVR: Clear EIND on system start-up 
For AVR chips (Atmega2560) Program Counter register larger than 16 bits
EIND represents the most significant byte that is used for EICALL and EIJMP
instructions.

Setting of EIND is normally managed by compiler, but I have seen a situation
when for first 64K flash segment compiler didn't set EINT explicitly. Thus
setting EIND at system startup makes sure we are safe.
 2015-12-29 18:46:28 +02:00
Dimitry Kloper
9a4a06bf47 AVR: Explicitly disable interrupts as the first step of system init 
Disabling interrupts at the very beginning of system init does not
make sense after reset since interrupts are disabled anyway. But
it is very convenient for debugging purposes, in situations when the
system misbehaves and ocassionally jumps to zero.
 2015-12-29 18:35:36 +02:00
Dimitry Kloper
ff5e589f76 AVR: add support for TCGETS and TCSETS terminal controls 
Sometimes I need UART to support binary data transfer, TCSETS/TCGETS allow
stwitching into binary mode.
 2015-12-29 17:56:44 +02:00
Dimitry Kloper
41bdcd16b8 Change notation of PCH and PCL registers into PC0 and PC1 
This is for forthcoming Atmega2560 support. The Atmega2560 has 24-bit PC
thus, PCH and PCL would become PCH, PCM and PCL (M for Middle). The problem
that in this notation PCM is equivalent to former PCH. This makes compatable
porting kind of difficult, at least for my taste.

Instead PCH becomes PC0 and PCL becomes PC1 (think of the index as order of
bytes pushed to stack when call is performed, PC0 as MSB goes first, PC1
goes to stack second, and for 24-bit PC, PC2 as LDB goes last).
 2015-12-28 00:46:24 +02:00
Dimitry Kloper
0c1294d332 Introduce a new Kconfig variant for Atmega2560 and add some basic stuff 
Modify Kconfig to be aware of the new chip.
Add all the interrupt hanler constants and vectors where needed.
Move contsatnts from generic to specific headers when needed.
 2015-12-27 01:47:35 +02:00
Gregory Nutt
a73d266469 AVR: Fix some spacing issues 2015-10-07 16:24:54 -06:00
Gregory Nutt
9caf33e13b Standardize the width of all comment boxes in C header files 2015-10-03 07:28:30 -06:00
Gregory Nutt
7ced84c5f0 Standardize the width of all comment boxes in C files 2015-10-03 07:25:03 -06:00
Gregory Nutt
36726b1bc4 Standardize the width of all comment boxes in header files 2015-10-02 17:42:29 -06:00
Gregory Nutt
fb926e7283 Fix references to the no-longer-existent misc/ directory in comments, README files, and documentation 2015-06-28 08:08:57 -06:00
Gregory Nutt
ae15c6963c Make some file section headers more consistent with standard 2015-04-08 08:04:12 -06:00
Gregory Nutt
c29995fd85 Rename all use of up_boardinitialize(). Should not use common microprocessing naming convention but rather the microprocessor-specific naming conventioni 2015-02-28 07:14:37 -06:00
Gregory Nutt
d9d530850a Review/modifications for change of last merge 2015-01-31 14:10:53 -06:00
Gregory Nutt
e4b0df0431 Merge commit '1207647ee19ac48746300f2d3fa8f4679c32de95' 2015-01-31 13:47:10 -06:00
jeditekunum
9da75dc4f7 Interrupt vectors for ATMEGA1284P. 2015-01-26 14:10:46 -06:00
jeditekunum
96d06d7a70 Fix typos. 2015-01-26 13:55:26 -06:00
jeditekunum
6d361911f1 First step at porting to MoteinoMEGA. LED shows assert failure at boot. Appears to be short double blink, short off (~1sec), followed by 250ms toggle cycles. Most of it derived from amber board. 2015-01-24 14:31:35 -06:00
Gregory Nutt
30b141e2c8 Remove CONFIG_DEBUG_STACK. Adding CONFIG_STACK_COLORATION makes this configuration option pointless 2015-01-24 06:49:51 -06:00
Gregory Nutt
e8f266001d Add CONFIG_STACK_COLORATION that does the same thing as CONFIG_DEBUG_STACK but without enabling debug. From David Sidrane 2015-01-24 06:03:39 -06:00
Gregory Nutt
31b8137956 There used to be two ways to pass parameters to new tasks, depending upon the configuration: Either (1) argv[] as created as an array with each string strdup'ed. Or (1) argv[] array and strings were created on the stack before the new task was started. Now, there is only one way, way (1). Way (2) might be slightly more compact, but this is not worth carry the complexity of two different ways of doing the same thing. 2014-09-01 15:39:34 -06:00
Gregory Nutt
6455f60c60 Remove os_internal.h it has been replace by several new header files under sched/. There have been some sneak inclusion paths via os_internal.h, so expect a few compilation errors for some architectures 2014-08-08 18:39:28 -06:00
Gregory Nutt
8b2a8fceba Change CONFIG_MSEC_PER_TICK to CONFIG_USEC_PER_TICK. This gives more options for system timers in general, but more importantly, let's us realize higher resolution for the case of CONFIG_SCHED_TICKLESS=y -- of course, at the risk of some new interger overvflow problems 2014-08-07 13:42:47 -06:00
Gregory Nutt
594083d870 Rename up_timerinit() to up_timer_initailize(); Add prototypes for candidate interfaces for the tickless OS; Don't build existing timer initialization logic if CONFIG_SCHED_TICKLESS is defined. 2014-08-06 16:26:01 -06:00
Gregory Nutt
af2bb81ac2 Add serial method so that lower half driver can provide RX flow control information. From Jussi Kivilinna 2014-05-08 09:00:33 -06:00
Gregory Nutt
25d4ff745b More trailing whilespace removal 2014-04-13 16:22:22 -06:00
Gregory Nutt
da289c4962 Create AVR32 Kconfig files; reshuffled lots of configuration names 2014-03-05 11:23:54 -06:00
Gregory Nutt
271fdb5bc6 Misc changes from Richard Cochran 2014-01-15 11:05:15 -06:00
Gregory Nutt
d01808c603 LM: Don't initialize .data if running in SRAM. Global missing intialize type. SAMA5 NAND: Fix for read nand in smaller chunks 2013-12-05 10:37:55 -06:00
patacongo
c85fcaecdb Rename g_heapbase to g_idle_topstack; Fix kernel build heap allocation which cannot use g_heapbase 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5739 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-14 14:42:52 +00:00
patacongo
1b8979d24f Serial driver needed even when no console; Fix user LED settings in all STM32 configurations 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5575 42af7a65-404d-4744-a932-0658087f49c3
 2013-01-28 15:03:17 +00:00
patacongo
36df84c843 Email address change in nuttx/ 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5145 42af7a65-404d-4744-a932-0658087f49c3
 2012-09-13 18:32:24 +00:00
patacongo
4f469e6316 Reconfigured Shenzhou to use JTAG. Misc Kconfig changes 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5118 42af7a65-404d-4744-a932-0658087f49c3
 2012-09-09 15:43:18 +00:00
patacongo
95ec4c3991 Auto-configuration updates from Richard Cochran 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5032 42af7a65-404d-4744-a932-0658087f49c3
 2012-08-17 14:07:48 +00:00
patacongo
40888af331 Move RAMLOG driver to drivers/syslog; Add ability to output debug information to any character device or file 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4996 42af7a65-404d-4744-a932-0658087f49c3
 2012-08-02 00:42:46 +00:00
patacongo
3cd260900e More Kconfig stuff 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4623 42af7a65-404d-4744-a932-0658087f49c3
 2012-04-17 00:24:19 +00:00
patacongo
b4852fca75 Move serial header files to include/nuttx/serial 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4500 42af7a65-404d-4744-a932-0658087f49c3
 2012-03-21 19:47:23 +00:00
patacongo
d2e05ac96f Fix a small RAM log bug (the RAM log still does not work) 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4385 42af7a65-404d-4744-a932-0658087f49c3
 2012-02-12 20:27:49 +00:00
patacongo
8b9f3616cb Fix some typos and compilation errors introduced in the last checkin 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4384 42af7a65-404d-4744-a932-0658087f49c3
 2012-02-12 02:53:01 +00:00
patacongo
8595411e4a Add logic to re-direct debug output to a sysloggin device 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4381 42af7a65-404d-4744-a932-0658087f49c3
 2012-02-11 14:20:40 +00:00
patacongo
667290b144 Add logic so that a RAM log can be used in place of a console device 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4380 42af7a65-404d-4744-a932-0658087f49c3
 2012-02-11 03:50:52 +00:00
patacongo
9db7adaa53 Add support for accessing printf, sprintf, puts, etc. strings that do not lie in the MCU data space 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@3738 42af7a65-404d-4744-a932-0658087f49c3
 2011-07-01 19:08:04 +00:00
patacongo
ae8963b19b Add logic to measure AVR stack usage 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@3722 42af7a65-404d-4744-a932-0658087f49c3
 2011-06-18 13:22:36 +00:00
patacongo
370cbe8195 Fix AVR clock setup; add SPI driver 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@3721 42af7a65-404d-4744-a932-0658087f49c3
 2011-06-17 22:03:20 +00:00
patacongo
bfe2a9555f Use USART TX state consistently 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@3720 42af7a65-404d-4744-a932-0658087f49c3
 2011-06-17 18:22:23 +00:00
patacongo
ee394f026a Back out earlier change.. AVR vectors should be jmp not rjmp 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@3713 42af7a65-404d-4744-a932-0658087f49c3
 2011-06-16 16:58:30 +00:00