NuttX provides the UDP_BINDTODEVICE socket option. This is a UDP protocol-specific implementation of the semi-standard Linux SO_BINDTODEVICE socket option: "SO_BINDTODEVICE forces packets on the socket to only egress the bound interface, regardless of what the IP routing table would normally choose. Similarly only packets which ingress the bound interface will be received on the socket, packets from other interfaces will not be delivered to the socket." https://codingrelic.geekhold.com/2009/10/code-snippet-sobindtodevice.html
If CONFIG_NET_UDP_BINDTODEVICE is selected and a UDP socket is bound to the device, then unrecognized packets UDP packets must not be dropped, but must be forwarded along to the bound socket unconditionally.
It the typical case, this should have no impact. It does effect the applications that use DHCP and do select the UDP_BINDTODEVICE socket option.
This PR replace existing improper logic in the code and also the improper attempts to fix problems from PR #3601 and PR #3598. Those changes are improper because they expose DHCP appliction dependencies in the OS, breaking modularity and independence of the OS and application.
Tested with stm32f4discovery:netnsh with CONFIG_NET_UDP_BINDTODEVICE. A proper DHCP test setup is needed, however.
The RISC-V Integer Calling Convention states that the stack pointer
shall always be aligned to a 128-bit boundary upon procedure entry, both
for RV32* and RV64* ISAs (exception to the RV32E ISA, which must follow a
specific convention)
Summary:
- This commit adds stack coloration for the idle task
Impact:
- rp2040 with CONFIG_STACK_COLORATION=y
Testing:
- Tested with nsh, nshsram and smp configurations
- NOTE: CONFIG_STACK_COLORATION=y needs to be added
Summary:
- The NuttX for raspberrypi-pico boots via the boot_stage2 provided
by the pico-sdk which sets the MSP at the end of the SRAM.
- However, the NuttX expects the MSP is set to the top of the idle stack.
- This commit fixes this issue.
Impact:
- None
Testing:
- Tested with nsh, nshsram and smp configrations
Summary:
- This commit adds maix-bit:smp2 configuration to test different
sched parameters such as CONFIG_SCHED_CHILD_STATUS=y
Impact:
- None
Testing:
- Tested with ostest
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary:
- This commit fixes the signest_test issue with lc823450-xgevk
Impact:
- SMP with CONFIG_SCHED_CHILD_STATUS=y
Testing:
- Tested with ostest with lc82345-xgevk:rndis
- NOTE: need to revert the commit 65274d5fdf
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary:
- SP_SECTION was introduced to allocate spinlock in non-cachable
region mainly for Cortex-A to stabilize the NuttX SMP kernel
- However, all spinlocks are now allocated in cachable area and
works without any problems
- So SP_SECTION should be removed to simplify the kernel code
Impact:
- None
Testing:
- Build test only
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Pros:
* Reduce code differences
* Smaller allocations for !CONFIG_ARCH_USE_MODULE_TEXT
Cons:
* Likely to use more memory for !CONFIG_ARCH_USE_MODULE_TEXT in total
Tested with:
* sim:module on macOS
* esp32-devkit:nsh + CONFIG_MODULE on qemu
* lm3s6965-ek:qemu-protected + CONFIG_EXAMPLES_SOTEST on qemu
Summary:
- The CONFIG_SMP_IDLETHREAD_STACKSIZE was introduced to optimize
the idle stack size for other than CPU0
- However, there are no big differences between the idle stacks.
- This commit removes the config to simplify the kernel code
Impact:
- All SMP configurations
Testing:
- Tested with ostest with the following configs
- spresense:smp, spresense:rndis_smp
- esp32-devkitc:smp (QEMU), maix-bit:smp (QEMU)
- sabre-6quad:smp (QEMU), sabre-6quad:netnsh_smp (QEMU)
- raspberrypi-pico:smp, sim:smp (x86_64)
Signed-off-by: Masayuki Ishikawa <asayuki.Ishikawa@jp.sony.com>
This config is only useful when there is a > 4MB PSRAM and thus needs to
be selected by the user explicitly.
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
