chao.an
736add0fe8
arch/backtrace: correct the skip counter
...
Signed-off-by: chao.an <anchao@xiaomi.com>
2021-12-30 16:57:40 +08:00
Xiang Xiao
b92c90ee81
arch/arm: Fix rebase error in arm_backtrace_thumb.c
...
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2021-12-29 20:42:05 +08:00
chao.an
7ed0b97414
make/allsyms: skip the unnecessary link operation
...
For incremental compilation, skip the stage 1 dummy link
operation if nuttx elf has been generated
Signed-off-by: chao.an <anchao@xiaomi.com>
2021-12-28 23:47:10 -06:00
Xiang Xiao
dd942f0b04
sched/backtrace: Dump the complete stack regardless the depth
...
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2021-12-29 12:09:54 +08:00
chao.an
cf2dfa8985
arch/arm/assert: move the arm_assert to common code
...
Signed-off-by: chao.an <anchao@xiaomi.com>
2021-12-28 05:09:30 -06:00
chao.an
579738c8fa
arch/arm: move the backtrace implement to common code
...
Signed-off-by: chao.an <anchao@xiaomi.com>
2021-12-28 03:02:01 -06:00
chao.an
a42aa8415d
compile/flags: add FRAME_POINTER into Toolchain.defs
...
Signed-off-by: chao.an <anchao@xiaomi.com>
2021-12-27 22:31:27 -06:00
chao.an
8eb999ff03
arch/arm: select ARM_THUMB by default for Cortex-M
...
Signed-off-by: chao.an <anchao@xiaomi.com>
2021-12-27 22:30:53 -06:00
Petro Karashchenko
3ccb657dc2
nuttx: remove space befone newline in logs
...
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
2021-12-27 21:01:19 -06:00
chao.an
6069433d2d
arch/arm/cortex-a/r: dump all registers with alias
...
Signed-off-by: chao.an <anchao@xiaomi.com>
2021-12-23 06:54:32 -06:00
David Sidrane
74e692b3c1
stm32f7:sdmmc invalidate before DMA to avoid eviction overwrite
...
For FAT the same buffer is used for read and writes, there
is a possibility a cache line is dirty. But the fs is
not dirty and will not write the sector to disk. This can
be seen https://github.com/PX4/NuttX/pull/175
When the system is busy that cache line can be evicted after the
RX DMA has completed and overwrite the data in memory. The solution
is to invalidate before the DMA to prevent an evection causing an
overwite, and after the DMA it to insure coherency.
2021-12-22 20:44:04 -06:00
chao.an
a0b61bbf6f
arm/cortex-a/r: enhance the task dump
...
add irq stack information
add cpu loading
Signed-off-by: chao.an <anchao@xiaomi.com>
2021-12-22 11:46:02 -03:00
chao.an
2737701996
cortex-m/hardfault: add secure-fault handler
...
Signed-off-by: chao.an <anchao@xiaomi.com>
2021-12-21 07:08:13 -06:00
Juha Niskanen
422ceec99b
Fix typos in comments and Kconfig files
...
Signed-off-by: Juha Niskanen <juha.niskanen@haltian.com>
2021-12-21 03:26:16 -06:00
Simon Filgis
6cc48ff6ff
arch/arm/samv7: initial support for LIN bus communication
...
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
Co-authored-by: Petro Karashchenko <petro.karashchenko@gmail.com>
2021-12-20 18:23:05 -03:00
Petro Karashchenko
3e76c3266e
assert: unify stack and register dump across platforms
...
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
2021-12-20 00:02:12 -03:00
David Sidrane
e269b5fa28
Revert "stm32h7 sdmmc: set SDMMC_CK pin to high speed (50 MHz) mode. When it was in slow speed mode (by default), the output SDMMC_CK clock rise and fall times were about 13 ns each, that were very slow and prevented some SDIO devices from working."
...
This reverts commit 0aecfe8691
.
2021-12-19 01:40:35 -06:00
raiden00pl
87a8b1bed9
nrf52/Kconfig: NRF52_SDC_LE_CODED_PHY not available for nrf52832
2021-12-18 12:27:59 -06:00
raiden00pl
f3fdd5a019
arch/arm/src/nrf52/Kconfig: select IRQPRIO for SoftDevice
2021-12-18 09:13:36 -06:00
raiden00pl
a6c64795f4
arch/arm/src/nrf52/nrf52_sdc.c: raise error if BT device not selected
2021-12-18 09:13:36 -06:00
raiden00pl
cf2dae8d79
arch/arm/src/nrf52/nrf52_sdc.c: nxstyle fixes
2021-12-17 12:35:17 -06:00
raiden00pl
af143c96fc
arch/arm/src/nrf52/nrf52_sdc.c: public device address and static device address support
2021-12-17 12:35:17 -06:00
raiden00pl
c7f6ac63b0
arch/arm/src/nrf52/nrf52_sdc.c: add option to register UART H4 device
2021-12-17 12:35:17 -06:00
raiden00pl
23ef3ea64c
arch/arm/src/nrf52/nrf52_sdc.c: remove nedless new lines
2021-12-17 12:35:17 -06:00
raiden00pl
26951f5018
arch/arm/src/nrf52/nrf52_sdc.c: print HCI opcode as hex
2021-12-17 12:35:17 -06:00
raiden00pl
07c9204fd6
arch/arm/src/nrf52/nrf52_sdc.c: fix status byte offset
2021-12-17 12:35:17 -06:00
raiden00pl
ab66800e13
arch/arm/src/nrf52/Kconfig: fix typos
2021-12-17 12:35:17 -06:00
raiden00pl
ba6e8696b2
arch/arm/src/nrf52/hardware/nrf52_ficr.h: add device address types
2021-12-17 12:35:17 -06:00
raiden00pl
07d295b8db
add 5-Clause Nordic License barrier for Nordic SoftDevice Controller
2021-12-17 11:22:39 -06:00
Gerson Fernando Budke
2dd5578d50
arch/arm/src/samv7/Kconfig: Define mem sizes
...
Current samv7 platform does not define SoC memories sizes. This define
both internal flash and sram memories sizes and update all defconfig
files.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
2021-12-16 06:56:42 -03:00
Alexander Lunev
0aecfe8691
stm32h7 sdmmc: set SDMMC_CK pin to high speed (50 MHz) mode.
...
When it was in slow speed mode (by default), the output SDMMC_CK clock rise and
fall times were about 13 ns each, that were very slow and
prevented some SDIO devices from working.
2021-12-16 01:28:05 -06:00
chao.an
b11833cbba
arch/assert: flush the syslog before stack dump
...
flush the syslog before stack dump to avoid buffer overwrite
Signed-off-by: chao.an <anchao@xiaomi.com>
2021-12-15 12:00:35 -06:00
Petro Karashchenko
51a2db6ffc
Kconfig: improve uniformity
...
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
2021-12-14 07:32:48 -06:00
Petro Karashchenko
af614ac77d
tls: restore C89 compatibility for TLS
...
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
2021-12-13 21:14:53 -06:00
chao.an
c2fd66bfab
arch/arm/risc-v/xtensa: add support of all symbols for debugging
...
Signed-off-by: chao.an <anchao@xiaomi.com>
2021-12-13 08:31:13 -06:00
chao.an
89e2f00dad
arch/assert: fix the stack dump overflow
...
[ EMERG] kasan_report: kasan detected a read access error, address at 0x3c24fca8, size is 4
[ EMERG] up_assert: Assertion failed at file:kasan/kasan.c line: 104 task: init
[ EMERG] backtrace|10: 0x2c334666 0x2c35f0d6 0x2c359ef6 0x2c35f830 0x2c360ed4 0x2c3615c0 0x2c324e0c 0x2c30a168
[ EMERG] up_registerdump: R0: ffffffff R1: 00000004 R2: ffffffff R3: ffffffff
[ EMERG] up_registerdump: R4: 3c20d4f0 R5: 2c35acd5 R6: 00000000 FP: 3c24fae8
[ EMERG] up_registerdump: R8: 3c20d504 SB: ffffffff SL: 2c413e7c R11: 2c411eb8
[ EMERG] up_registerdump: IP: 00000002 SP: 3c24fae8 LR: 00000003 PC: 2c35f0d6
[ EMERG] up_registerdump: xPSR: 61010000 BASEPRI: 000000e0 CONTROL: 00000004
Signed-off-by: chao.an <anchao@xiaomi.com>
2021-12-13 01:43:18 -06:00
chao.an
0b7b8d274f
arm/cortex-m: enhance the crash dump
...
1. add irq stack information to list
2. add cpu loading into list
before:
Idle Task: PID=0 PRI=0 Stack Used=512 of 3048
hpwork: PID=1 PRI=224 Stack Used=304 of 2016
lpwork: PID=2 PRI=100 Stack Used=304 of 2016
rptun: PID=4 PRI=224 Stack Used=856 of 2008
after:
[ EMERG] [ap] up_showtasks: PID PRI USED STACK FILLED CPU COMMAND
[ EMERG] [ap] up_showtasks: ---- ---- 928 2048 45.3% ---- irq
[ EMERG] [ap] up_dump_task: 0 0 512 3048 16.7% 99.4% Idle Task
[ EMERG] [ap] up_dump_task: 1 224 304 2016 15.0% 0.0% hpwork
[ EMERG] [ap] up_dump_task: 2 100 304 2016 15.0% 0.0% lpwork
[ EMERG] [ap] up_dump_task: 4 224 856 2008 42.6% 0.0% rptun
Signed-off-by: chao.an <anchao@xiaomi.com>
2021-12-12 21:40:29 -06:00
Matheus Castello
294694bb2f
arch: arm: select LIBC_ARCH_ATOMIC when config ARCH_CHIP_RP2040
...
Use the common atomic operations when needed.
Signed-off-by: Matheus Castello <matheus@castello.eng.br>
2021-12-11 11:32:17 -06:00
Juha Niskanen
a35d205f3b
arch/arm/src/stm32l4/stm32l4_pwm.c: fix printf format
...
Signed-off-by: Juha Niskanen <juha.niskanen@haltian.com>
2021-12-10 12:30:26 -06:00
Daniel Agar
efc949bceb
arch/arm/src/stm32/Kconfig STM32_STM32F412 add SPI2 & SPI3
2021-12-09 21:30:41 -06:00
chao.an
3d75c25737
cortex-m/hardfault: enhance the dump information of mem/hard-fault
...
Signed-off-by: chao.an <anchao@xiaomi.com>
2021-12-09 11:42:21 -06:00
chao.an
66e604b40e
cortex-m/hardfault: add usage-fault handler
...
Signed-off-by: chao.an <anchao@xiaomi.com>
2021-12-09 11:42:21 -06:00
chao.an
2f449245cc
cortex-m/hardfault: add bus-fault handler
...
Signed-off-by: chao.an <anchao@xiaomi.com>
2021-12-09 11:42:21 -06:00
chao.an
99fa58c871
arm/cortex-m23: armv8-m baseline do not support mem-fault
...
Signed-off-by: chao.an <anchao@xiaomi.com>
2021-12-09 05:36:00 -06:00
chao.an
3e812dd88c
cortex-m/fault: add CFSR(Configurable Fault Status Register) Definitions
...
Signed-off-by: chao.an <anchao@xiaomi.com>
2021-12-09 04:30:06 -06:00
Xiang Xiao
6357523892
arch: Add _wchar_t typedef like other basic types
...
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2021-12-09 16:57:23 +09:00
chao.an
9b502dca05
arm/backtrace: disable the sanitize address check
...
Signed-off-by: chao.an <anchao@xiaomi.com>
2021-12-09 01:05:46 -06:00
chao.an
7a61588b00
cortex-m/backtrace: remove the push process to simplify backtrace
...
Signed-off-by: chao.an <anchao@xiaomi.com>
2021-12-09 01:05:46 -06:00
chao.an
437c81f8d0
cortex-m/assert: dump all registers with alias
...
Signed-off-by: chao.an <anchao@xiaomi.com>
2021-12-09 00:16:04 -06:00
Michal Lenc
ae57492189
samv7: enable MCAN driver support for both rev A and rev B
...
This commit enables the MCAN driver to function with both rev A and rev B
version of the chip. The version of the chip is selected automtically from
SAM_CHIPID_CIDR register so there is no need to predefined it in the
configuration.
The functonality was tested on rev B version of the chip. The rev A was
not tested since I do not have the functional board but the code remains
the same as in the previous NuttX version so it should not cause any
additional troubles.
The code is co-authored by Miloš Pokorný who wrote the initial transition
to rev B of the chip.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
Co-authored-by: Miloš Pokorný <milos.pokorny@seznam.cz>
2021-12-07 23:36:11 -06:00