Gregory Nutt
|
7378a97c74
|
PIC32MZ: Fix some repeated typos and work around an issue with passing defined parameters to a macro that takes multiple parameters
|
2015-02-26 15:39:57 -06:00 |
|
Gregory Nutt
|
a688cdc2ee
|
PIC32MZ: Add logic to configure peripheral pins for the selecte UARTs
|
2015-02-26 15:05:11 -06:00 |
|
Gregory Nutt
|
db9b6b5f1a
|
PIC32MZ: Add peripheral pin selection register definitions
|
2015-02-26 13:19:40 -06:00 |
|
Gregory Nutt
|
6961f84e62
|
Costmetic updates comments and style; Add NFS dependency on IPv4
|
2015-02-26 06:04:23 -06:00 |
|
Gregory Nutt
|
8fa7c8d4fa
|
Tiva ADC: Drive updates from Calvin Maguranis
|
2015-02-25 13:38:22 -06:00 |
|
Gregory Nutt
|
a4d514c79b
|
PIC32MX/Z: Partial review of PIC32MZ cp0 register -- need to do more; Also found issues with definitions for PIC32MX -- need to be retested
|
2015-02-25 13:33:09 -06:00 |
|
Gregory Nutt
|
2c929aa55f
|
PIC32MZ: Add file for GPIO interrupt support. There are issues so configuration is EXPERIMENTAL for now
|
2015-02-25 11:09:04 -06:00 |
|
Gregory Nutt
|
8f8ed30d52
|
PIC32MZ: Add IOPort header file and GPIO configuration logic
|
2015-02-25 10:43:12 -06:00 |
|
Gregory Nutt
|
1b4bc931cd
|
Adjust microMIPS compile options to enable interlinking with 32-bit code
|
2015-02-25 09:54:48 -06:00 |
|
Gregory Nutt
|
59412f25ce
|
SAM4CM free-running time: Change overflow type from uint16 to uint32. From Max Neklyudov.
|
2015-02-25 08:12:31 -06:00 |
|
Gregory Nutt
|
70c8ff6581
|
Eliminate some warnings
|
2015-02-25 08:05:35 -06:00 |
|
Gregory Nutt
|
b99ff9e03b
|
Refresh configuration
|
2015-02-25 07:22:58 -06:00 |
|
Gregory Nutt
|
0d6ba023a1
|
PIC32MZ: Add serial driver
|
2015-02-24 19:44:25 -06:00 |
|
Gregory Nutt
|
c3d282df7b
|
PIC32MZ: Add low level UART support
|
2015-02-24 17:23:56 -06:00 |
|
Gregory Nutt
|
87faa1008f
|
PIC32MZ: Add UART register definition header file
|
2015-02-24 17:00:14 -06:00 |
|
Gregory Nutt
|
65d762f902
|
PIC32MZ: Add error exception handling and interrupt decode logic
|
2015-02-24 16:11:30 -06:00 |
|
Gregory Nutt
|
6798e67177
|
PIC32MZ: Add support for a timer interrupt
|
2015-02-24 15:36:08 -06:00 |
|
Gregory Nutt
|
d0940671cf
|
PIC32MZ: Add interrupt controller support
|
2015-02-24 14:50:54 -06:00 |
|
Gregory Nutt
|
acef552fac
|
PIC32MZ: Add interrupt controller register definitions
|
2015-02-24 13:16:04 -06:00 |
|
Gregory Nutt
|
6cf496ee67
|
PIC32MX: Standardize of naming in comments
|
2015-02-24 11:32:15 -06:00 |
|
Gregory Nutt
|
f5a0fb060d
|
PIC32MZ: Add Oscillator header file; Add logic to set up peripheral clocks on reset
|
2015-02-24 11:16:32 -06:00 |
|
Gregory Nutt
|
354e5a9a11
|
PIC32MZ: Add beginnings of CPU initialization logic. Still some bad logic for setting up peripheral clocking
|
2015-02-24 09:30:30 -06:00 |
|
Gregory Nutt
|
d4ce089451
|
Merge commit '45e0cf1f4a7664974933db2a408ccea6acad4eff'
|
2015-02-24 07:13:48 -06:00 |
|
sauttefk
|
a6695b442e
|
Fix SSI TX and RX legacy mapping of TM4C1294NC
|
2015-02-24 03:31:12 +01:00 |
|
Gregory Nutt
|
15579510e8
|
PIC32MZ: Fix some PLL setup logic
|
2015-02-23 17:27:28 -06:00 |
|
Gregory Nutt
|
db10058d27
|
PIC32MZ: Fix an error in the branch target of the hard-coded power up reset branch
|
2015-02-23 17:09:57 -06:00 |
|
Gregory Nutt
|
9e92b9041b
|
PIC32MZ: Most related to start up file a FLASH device configuration setup
|
2015-02-23 16:36:35 -06:00 |
|
Gregory Nutt
|
cfd139e8af
|
PIC32MZ: Make sure that the microMIPS ISA is selected on all common MIPS32 assembly files when the PIC21MZ is selected
|
2015-02-23 12:09:34 -06:00 |
|
Gregory Nutt
|
9a4f360265
|
PIC32MZ: Resolve a PIC32 dependency in the generic MIPS32 code
|
2015-02-23 11:56:16 -06:00 |
|
Gregory Nutt
|
b7a8a1f8aa
|
Finishes PIC32MZ device configuration definitions
|
2015-02-23 09:58:34 -06:00 |
|
Gregory Nutt
|
d75acb630d
|
PIC32MZ: Add memorymap and devcfg header files
|
2015-02-22 16:21:12 -06:00 |
|
Gregory Nutt
|
5559b72abd
|
PIC32MZ: Framework for startup function. Still has too much PIC32MX garbage in it to be credible
|
2015-02-22 14:30:53 -06:00 |
|
Gregory Nutt
|
9c9fc13b6c
|
MIPS: Add some build support for the M14K and also for the PIC32MZ Starter Kit. Still a long way to go
|
2015-02-22 13:45:59 -06:00 |
|
Gregory Nutt
|
a81ebff6e0
|
Remove support for obsolete PIC32 toolchain configuration names
|
2015-02-22 12:14:20 -06:00 |
|
Gregory Nutt
|
024a5cb278
|
PIC32MZ: Add just enough PIC32MZ logic that we can run 'make menuconfig'
|
2015-02-22 10:53:24 -06:00 |
|
Gregory Nutt
|
f273bcfa82
|
Fix a typo that prevents building PIC32... How long has that been there?
|
2015-02-21 19:41:59 -06:00 |
|
Gregory Nutt
|
c5b3e3e7aa
|
Current Pinguino toolchain uses prefix p32 instead of mips
|
2015-02-21 19:41:26 -06:00 |
|
Gregory Nutt
|
0dc70108b8
|
STM32: Fix for compilation introduced by last backup RAM change. Not sure it it is correct, be now things do compile
|
2015-02-21 17:51:03 -06:00 |
|
Gregory Nutt
|
63711ad338
|
Adds the ability to use the STM32F2 and STM32F4 Battery Backedup SRAM in the file system. With an option to Save Panic context to one of the files. From David Sidrane.
|
2015-02-21 15:15:51 -06:00 |
|
Gregory Nutt
|
7d43cf2087
|
Changes to support fully write protecting the backup domain. N.B. stm32_pwr_enablebkp did not account for the delay from enable to the domain being writable. The KISS solution is a up_udelay. A more complex solution would be a negated write test with restore. From David Sidrane.
|
2015-02-21 14:53:33 -06:00 |
|
Gregory Nutt
|
2d91128111
|
Tiva GPIO clean-up by Calvin Maguranis
|
2015-02-20 13:40:25 -06:00 |
|
Gregory Nutt
|
a0a553f3e9
|
Tiva: Move GPIIO prototypes out of arch/arm/include/tiva/irq.h to arch/arm/tiva/tiva_gpio.h where they belong
|
2015-02-20 13:31:43 -06:00 |
|
Gregory Nutt
|
ac0cd3655a
|
Fix some time value changes; mostly changing greater than 1000000000 to greater than or equal to 1000000000. From Juha Niskanen
|
2015-02-20 07:07:36 -06:00 |
|
Gregory Nutt
|
2532e33de2
|
VFS: The inode unlink method should not be support if operations on the root pseudo-filesystem are disabled.
|
2015-02-18 09:34:58 -06:00 |
|
Gregory Nutt
|
d3196ca5c3
|
The RTC ioctl() method is now a configuration option
|
2015-02-18 08:23:10 -06:00 |
|
Gregory Nutt
|
57eb72a13f
|
Add an IOCTL method to the RTC interface
|
2015-02-18 08:05:31 -06:00 |
|
Gregory Nutt
|
80cb25a0ff
|
Tiva ADC: Should not have its own ADC debug. Should use the common Analog debug
|
2015-02-17 14:54:56 -06:00 |
|
Gregory Nutt
|
7354e41aa6
|
Tiva: Updated files to allow for ADC triggering by the timer. I’ve cleaned up some parts of the ADC code, too, and fleshed out the PWM triggering ioctl. From Calvin Maguranis
|
2015-02-17 13:50:30 -06:00 |
|
Gregory Nutt
|
d578829ddd
|
Tiva SPI: Cosmetic improvements
|
2015-02-17 12:45:47 -06:00 |
|
Gregory Nutt
|
56b29b00ea
|
EFM32 USB Device: Is not basically functional with this change. From Pierre-noel Bouteville.
|
2015-02-16 15:45:49 -06:00 |
|