Description bMS_VendorCode is incorrectly configured. Change it to
USB_REQ_GETMSFTOSDESCRIPTOR(0xee), which is the same as the request
processing logic for GET_MS_DESCRIPTOR in the code
Signed-off-by: sunkun3 <sunkun3@xiaomi.com>
In usbclass_unbind, DEV_FREEEP is called first, and later
usbclass_freereq does not free memory due to ep NULL
Signed-off-by: sunkun3 <sunkun3@xiaomi.com>
The netdev of link-local address cannot be auto decided, and the link-local address should always be reguarded as address on local network.
The problem we met:
When using `icmpv6_autoconfig` with multiple netdev, the `icmpv6_neighbor` may take out wrong netdev with ip address already set, then it may send solicitation with wrong address (`dev->d_ipv6draddr`) on wrong device, and regard the link-local address as conflict (because `dev->d_ipv6draddr` exists on this network).
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
1.add new intf regulator_set_mode to manual set rehulator lower power mode;
2.when add auto lp desc,the regulator lp mode is controlled by pm framework;
Signed-off-by: dulibo1 <dulibo1@xiaomi.com>
when add supply desc,the regulator is linked to the parent regulator
1.if enable the regualtor, the parent regulator is enabled
2.if disable all child regulator, the parent regualtor is disabled
Signed-off-by: dulibo1 <dulibo1@xiaomi.com>
Summary
Qemu virt board can choice CPU core with boot parameter
and we need to add Konfig option for choice
the change do this
Signed-off-by: qinwei1 <qinwei1@xiaomi.com>
If malloc chunk fails, and if malloc fails to dump all memory,
it will cause deadlock in multiple_mempool_info
Signed-off-by: anjiahao <anjiahao@xiaomi.com>
Sumary
add hostfs support for arm64, it's a copy
from arm32.
Note:
it's not support for opendir and readdir, command
like ls will not work.
Signed-off-by: qinwei1 <qinwei1@xiaomi.com>
/home/baerg/code/NXOS/nuttx/include/nuttx/note/noteram_driver.h💯61: error: unknown type name ‘bool’
100 | noteram_initialize(FAR const char *devpath, size_t bufsize, bool overwrite);
| ^~~~
/home/baerg/code/NXOS/nuttx/include/nuttx/note/noteram_driver.h:31:1: note: ‘bool’ is defined in header ‘<stdbool.h>’; did you forget to ‘#include <stdbool.h>’?
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
add set/get_power operation for sim_framebuffer to avoid assert
in fb_ioctl(cmd= FBIOSET_POWER/FBIOGET_POWER)
Signed-off-by: wangbowen6 <wangbowen6@xiaomi.com>
The `SIZEOF_ICMPV6_ECHO_REQUEST_S` and `SIZEOF_ICMPV6_ECHO_REPLY_S`
macro are intended to be `8+n`, but actually becomes `10-1+n` and causes
the packet sent by `ping6` one byte more than expected.
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
In armv8m the FPSCR[18:16] LTPSIZE field must be set to 0b100 for
"Tail predication not applied" as it's reset value.
Signed-off-by: zhangyuan21 <zhangyuan21@xiaomi.com>
1. virtio devics/drivers match and probe/remote mechanism;
2. virtio mmio transport layer based on OpenAmp (Compatible with both
virtio mmio version 1 and 2);
3. virtio-serial driver based on new virtio framework;
4. virtio-rng driver based on new virtio framework;
5. virtio-net driver based on new virtio framework
(IOB Offload implementation);
6. virtio-blk driver based on new virtio framework;
7. Remove the old virtio mmio framework, the old framework only
support mmio transport layer, and the new framwork support
more transport layer and this commit has implemented all the
old virtio drivers;
8. Refresh the the qemu-arm64 and qemu-riscv virtio related
configs, and update its README.txt;
New virtio-net driver has better performance
Compared with previous virtio-mmio-net:
| | master/-c | master/-s | this/-c | this/-s |
| :--------------------: | :-------: | :-------: | :-----: | :-----: |
| qemu-armv8a:netnsh | 539Mbps | 524Mbps | 906Mbps | 715Mbps |
| qemu-armv8a:netnsh_smp | 401Mbps | 437Mbps | 583Mbps | 505Mbps |
| rv-virt:netnsh | 487Mbps | 512Mbps | 760Mbps | 634Mbps |
| rv-virt:netnsh_smp | 387Mbps | 455Mbps | 447Mbps | 502Mbps |
| rv-virt:netnsh64 | 602Mbps | 595Mbps | 881Mbps | 769Mbps |
| rv-virt:netnsh64_smp | 414Mbps | 515Mbps | 491Mbps | 525Mbps |
| rv-virt:knetnsh64 | 515Mbps | 457Mbps | 606Mbps | 540Mbps |
| rv-virt:knetnsh64_smp | 308Mbps | 389Mbps | 415Mbps | 474Mbps |
Note: Both CONFIG_IOB_NBUFFERS=64, using iperf command, all in Mbits/sec
Tested in QEMU 7.2.2
Signed-off-by: wangbowen6 <wangbowen6@xiaomi.com>
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
NETUTILS_IPERF and CONFIG_DEFAULT_SMALL conflict
Loaded configuration '.config'
Configuration saved to '.config'
warning: LIBC_FLOATINGPOINT (defined at libs/libc/stdio/Kconfig:55) has direct dependencies !LIBM_NONE with value n, but is currently being y-selected by the following symbols:
- NETUTILS_IPERF (defined at /home/baerg/code/NXOS/apps/netutils/iperf/Kconfig:6), with value y, direct dependencies NET (value: y), and select condition NET (value: y)
make: *** [tools/Unix.mk:680: olddefconfig] Error 1
ERROR: failed to refresh
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
A sensor of this type measures the force on it, and additionally
compares the force with one or more specified thresholds. The sensor
can output the force value directly. Moreover, it's usually applied
as a press key. In that case, when it detects a force greater than
some given threshold, a corresponding event is reported.
Signed-off-by: jinxudong <jinxudong@xiaomi.com>
Fix error :
nuttx/libs/libm/newlib/include/math.h:89:8: error: ‘_Thread_local’ does not name a type; did you mean ‘thread_local’?
89 | extern _Thread_local int _tls_gamma_signgam;
| ^~~~~~~~~~~~~
| thread_local
In file included from /mnt/nuttx/include/libcxx/math.h:300,
from /mnt/nuttx/include/libcxx/cmath:308,
from /mnt/nuttx/include/libcxx/charconv:79,
from libcxx/src/string.cpp:10:
/mnt/nuttx/libs/libm/newlib/include/math.h:89:8: error: ‘_Thread_local’ does not name a type; did you mean ‘thread_local’?
89 | extern _Thread_local int _tls_gamma_signgam;
Signed-off-by: yanghuatao <yanghuatao@xiaomi.com>
+ brew install u-boot-tools
==> Fetching dependencies for u-boot-tools: openssl@3
==> Fetching openssl@3
==> Downloading https://ghcr.io/v2/homebrew/core/openssl/3/manifests/3.1.2-1
Already downloaded: /Users/runner/work/nuttx/nuttx/sources/tools/homebrew/downloads/d235bbcbe9c405bfbe837454515b9cb2793542891a2050e5948a94f596e2a51e--openssl@3-3.1.2-1.bottle_manifest.json
==> Downloading https://ghcr.io/v2/homebrew/core/openssl/3/blobs/sha256:2bea791e9eacc59e0a9099065f3229afaf2b68a9b7b3136ec508103985b1176c
Already downloaded: /Users/runner/work/nuttx/nuttx/sources/tools/homebrew/downloads/d082c3abe2fd32b11d857fb7111adc0fc02a0b345044c07f2e7db7160f15300e--openssl@3--3.1.2.ventura.bottle.1.tar.gz
==> Fetching u-boot-tools
==> Downloading https://ghcr.io/v2/homebrew/core/u-boot-tools/manifests/2023.07.02
Already downloaded: /Users/runner/work/nuttx/nuttx/sources/tools/homebrew/downloads/5e0a4a2e6eda6e1dc965b8523549685de4c2da7f1c68d8431bbd7c536642bfee--u-boot-tools-2023.07.02.bottle_manifest.json
==> Downloading https://ghcr.io/v2/homebrew/core/u-boot-tools/blobs/sha256:bfd54176e94ffd2ad380ab7cbd25e091afe9338b17343881cd957f5f6c30d5ed
Already downloaded: /Users/runner/work/nuttx/nuttx/sources/tools/homebrew/downloads/8ce6e97fdea98c1581ffe5f52ccd876f3cbf373da9a70f889948b5c888528402--u-boot-tools--2023.07.02.ventura.bottle.tar.gz
==> Installing dependencies for u-boot-tools: openssl@3
==> Installing u-boot-tools dependency: openssl@3
==> Pouring openssl@3--3.1.2.ventura.bottle.1.tar.gz
Error: Could not symlink bin/openssl
Target /usr/local/bin/openssl
is a symlink belonging to openssl@1.1. You can unlink it:
brew unlink openssl@1.1
To force the link and overwrite all conflicting files:
brew link --overwrite openssl@3
To list all files that would be deleted:
brew link --overwrite --dry-run openssl@3
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
