Gregory Nutt
934aded293
arch/: Adapt all Ethernet drivers to work as though CONFIG_NET_MULTIBUFFER were set. Remove all references to CONFIG_NET_MULTIBUFFER
2016-11-29 16:06:48 -06:00
Paul A. Patience
544f9ccf8a
ez80: Add *PTR definitions to inttypes.h
2016-10-27 16:16:13 -04:00
Paul A. Patience
912fe06a86
Add architecture-specific inttypes.h
2016-10-27 16:01:38 -04:00
Gregory Nutt
56f2454c86
Fix names of pre-processor variables used in header file idempotence
2016-08-06 18:48:45 -06:00
Gregory Nutt
d41008e220
Update some header commments
2016-08-06 18:16:31 -06:00
Gregory Nutt
4b4dbc79a2
Move driver related prototypes out of include/nuttx/fs/fs.h and into new include/drivers/drivers.h
2016-07-20 13:15:37 -06:00
Gregory Nutt
d5388eca05
devrandom_register() must be called before devurandom_register()
2016-07-18 11:24:04 -06:00
Gregory Nutt
1660329d06
Rename up_rnginitialize to devrandom_register
2016-07-18 10:55:37 -06:00
David Alessio
6cefbc0c3f
This change provides an option to add /dev/urandom to all architectures. The pseudo-random algorithm I choose strikes an arguably-good balance between being "random" and small/fast enough for 8/16 bit MCUs. It’s the well-documented xorshift128 algorithm. It has an internal state of 128 bits that can be [re-]seeded with a write.
2016-07-17 06:42:26 -06:00
Gregory Nutt
7b298a828d
up_pminitialize() needs to be called from instances of up_initialize()
2016-07-15 13:11:28 -06:00
Gregory Nutt
d3b3c71d97
All architectures: Add logic to automatically register /dev/ptmx a boot time
2016-07-15 11:54:41 -06:00
Gregory Nutt
5118264e6c
Rename CONFIG_SYSLOG_CONSOLE to CONFIG_CONSOLE_SYSLOG
2016-06-21 09:35:51 -06:00
Gregory Nutt
62d8f839c7
SYSLOG: Now a two phase initialization. Some SYSLOG channels cannot be initialized until later in the bringup
2016-06-21 07:52:24 -06:00
Gregory Nutt
7f16548f57
Replaces last three commits. Does the same thing, but does it in a way that does not change the usage model.
2016-06-21 05:26:08 -06:00
Gregory Nutt
c05da80a27
Eliminate a warning
2016-06-20 22:54:58 -06:00
Gregory Nutt
505ca542e8
Remove some last traces of lowvsyslog that were missed; Add a SYSLOG emergency channel for handling assertion output more cleanly
2016-06-20 16:11:50 -06:00
Gregory Nutt
43eb04bb8f
Without lowsyslog() *llinfo() is not useful. Eliminate and replace with *info().
2016-06-20 11:59:15 -06:00
Gregory Nutt
d40a473f72
Without lowsyslog() *llwarn() is not useful. Eliminate and replace with *warn().
2016-06-20 09:37:08 -06:00
Gregory Nutt
2b445ddccc
Remove lowsyslog(). The new syslog() includes all of the functionality of lowsyslog(). No longer any need for two interfaces.
2016-06-20 08:57:08 -06:00
Gregory Nutt
0f18f3bd15
Move RAMLOG initialize from up_initialilize.c files to syslog_initialize(). up_initialize.c files now call syslog_initialize() unconditionally
2016-06-19 09:39:21 -06:00
Gregory Nutt
ac18dc27ca
Common/Calypso/C5471: Convert *err() to either *info() or add ERROR:, depending on if an error is reported
2016-06-17 15:22:48 -06:00
Gregory Nutt
b39e53391d
Add underscore at beginning of alert() as well
2016-06-16 12:38:05 -06:00
Gregory Nutt
0c8c7fecf0
Add _ to the beginning of all debug macros to avoid name collisions
2016-06-16 12:33:32 -06:00
Gregory Nutt
a98bc05f65
New debug macro: alert(). This is high priority, unconditional output and is used to simplify and stanardize crash error reporting.
2016-06-14 09:07:53 -06:00
Gregory Nutt
3c2050040c
arch/z80/: Change some *err() message to *info() messages if what was a *dbg() message does not indicate and error condition.
2016-06-13 18:55:24 -06:00
Gregory Nutt
0f249016a0
Eliminate some warnings
2016-06-13 14:01:32 -06:00
Gregory Nutt
a1469a3e95
Add CONFIG_DEBUG_ERROR. Change names of *dbg() * *err()
2016-06-11 15:50:49 -06:00
Gregory Nutt
e99301d7c2
Rename *lldbg to *llerr
2016-06-11 14:55:27 -06:00
Gregory Nutt
1cdc746726
Rename CONFIG_DEBUG to CONFIG_DEBUG_FEATURES
2016-06-11 14:14:08 -06:00
Gregory Nutt
fc3540cffe
Replace all occurrences of vdbg with vinfo
2016-06-11 11:59:51 -06:00
Gregory Nutt
3a74a438d9
Rename CONFIG_DEBUG_VERBOSE to CONFIG_DEBUG_INFO
2016-06-11 11:50:18 -06:00
Gregory Nutt
5ef3e3e215
Replace confusing references to uIP with just 'the network'
2016-05-30 11:52:07 -06:00
Gregory Nutt
2a87741e72
Rename CONFIG_ARCH_HAVE_UARTn to CONFIG_UARTn_SERIALDRIVER
2016-05-25 10:45:01 -06:00
Gregory Nutt
48106e605a
Merge in arch/ submodule
2016-04-10 07:49:41 -06:00
Gregory Nutt
bd846c2e72
All architectures: Register the schedule note driver if enabled
2016-03-17 17:00:59 -06:00
Gregory Nutt
4d4f54a789
Rename current_regs to g_current_regs; For ARM, g_current_regs needs to be an array to support multiple CPUs
2016-03-09 13:41:48 -06:00
Gregory Nutt
9c63736c98
Standard some naming if code sectino comments
2016-02-21 18:06:09 -06:00
Gregory Nutt
83bc1c97c3
Rename irqsave() and irqrestore() to up_irq_save() and up_irq_restore()
2016-02-14 16:11:25 -06:00
Gregory Nutt
70e502adb0
Replace irqsave() with enter_critical_section(); replace irqrestore() with leave_critical_section()
2016-02-13 19:11:09 -06:00
Gregory Nutt
24428f7a59
z80 family: Replace explict references to g_readytorun with indirect references via the this_task() macro
2016-02-06 17:32:25 -06:00
Gregory Nutt
1166e311b0
Networking: Remove the HSEC argument from devif_timer.
2016-02-03 11:17:15 -06:00
Gregory Nutt
1e4f2ae2c1
Rename up_i2c initialize and uninitialize functions using the correct MCU-specific naming
2016-02-02 12:08:23 -06:00
Gregory Nutt
d2571985ef
I2C: up_i2creset should not be a global function; Now it is an I2C interface method
2016-02-02 11:21:45 -06:00
Gregory Nutt
0693e76be8
I2C: Remove the setfrequency method from the interface
2016-02-01 16:30:29 -06:00
Gregory Nutt
bec6f373a7
I2C: Cosmetic changes
2016-02-01 14:15:52 -06:00
Gregory Nutt
a64f36a63e
I2C: Remove setaddress method
2016-02-01 12:14:20 -06:00
Gregory Nutt
ce988c7ed3
Remove the read and write methods from the I2C interface
2016-02-01 09:22:10 -06:00
Gregory Nutt
2171438c61
I2C_TRANSFER support is no longer optional
2016-01-31 14:00:53 -06:00
Gregory Nutt
2d41fb26b8
z8 I2C driver now supports the I2C_TRANSFER method
2016-01-31 13:49:34 -06:00
Gregory Nutt
74d2073fca
ez80: Fix some compile errors when I2C_TRANSFER is enabled
2016-01-31 13:08:43 -06:00
Gregory Nutt
e4629af2bc
ez80: Add I2C_TRANSFER method to the I2C driver; Fixes for working with ZDS-II toolchain (still some problems with internal errors; Various fixes due to bit rot
2016-01-31 12:43:14 -06:00
Gregory Nutt
531d73af41
Remove I2C slave methods from I2C master interface; rename i2c_dev_s to i2c_master_s.
2016-01-30 08:35:46 -06:00
Gregory Nutt
9f9b85a932
Move include/nuttx/i2c.h to include/nuttx/i2c/i2c_master.h
2016-01-30 07:59:44 -06:00
Gregory Nutt
f002980b50
For eZ80 MCUs, rename up_spiinitialize to ez80_spibus_initialize
2016-01-27 08:39:02 -06:00
Gregory Nutt
52109ade2d
Flesh out unfinished lock() method implementations in al SPI drivers
2016-01-24 09:15:57 -06:00
Gregory Nutt
b7cbbab761
Remove CONFIG_SPI_OWNBUS: Now it is not just a good idea, it is the law
2016-01-23 18:10:21 -06:00
Gregory Nutt
4bd6adb725
Add dummy hwfeatures method to all SPI interfaces
2016-01-23 15:09:38 -06:00
Gregory Nutt
10001f8556
WINTOOl should be selected only for Cygwin. MSYS and native should not have it.
2016-01-09 16:34:33 -06:00
Gregory Nutt
927b1dcc1f
Initialize the telnet factory as part of the common architecture intialization
2015-12-07 11:40:29 -06:00
Gregory Nutt
e5e631e57f
include/nuttx/net/netdev.h and several Ethernet drivers in arch/: Most network drivers to not support statistics. Those that do only support them when DEBUG is enabled. Each driver collects an architecture specific set of statistics and there is no mechanism in place to view those statistics. Thus, the driver feature was mostly useless. This change standardizes the driver statistics and puts the definition in the common network device structure defined in netdev.h where they can be accessed by network applications. All Ethernet drivers that collect statistics have been adapted to use these common statistics.
2015-11-26 12:07:18 -06:00
Gregory Nutt
14d7ede265
All instances of up_initialize() should call loop_register() is CONFIG_DEV_LOOP=y
2015-11-25 17:10:41 -06:00
Gregory Nutt
076b05b460
In Kconfig of all CPUs with 16-bit address, force CONFIG_MM_SMALL=y
2015-11-23 12:16:35 -06:00
Gregory Nutt
79df561669
Rename board_led_off to board_autoled_off
2015-11-01 09:09:36 -06:00
Gregory Nutt
b28e32e3d3
Rename board_led_on to board_autoled_on
2015-11-01 09:07:06 -06:00
Gregory Nutt
9db4b4ca7e
Rename board_led_initialize to board_autoled_initiaize
2015-11-01 09:01:59 -06:00
Gregory Nutt
7a63e976ad
Remove TABs
2015-10-04 16:00:42 -06:00
Gregory Nutt
6fc6d17760
Fix some spacing problems
2015-10-04 14:59:08 -06:00
Gregory Nutt
36726b1bc4
Standardize the width of all comment boxes in header files
2015-10-02 17:42:29 -06:00
Gregory Nutt
26347891ac
Apply same fix for ARMv7-M to other architectures
2015-09-30 11:21:04 -06:00
Gregory Nutt
26eada3446
In all up_initialize() functions, automatically initialize TUN driver is so configureded
2015-09-06 09:35:29 -06:00
Gregory Nutt
975d912b40
Cosmetic: Move # of pre-processior command to column 1
2015-09-05 09:07:37 -06:00
Paul A. Patience
a0dc724a5d
Correct #if to #ifdef when the macro can be undefined. Fix bug in AT32UC3 clock initialization: AVR32_CLOCK_PLL_OSC1 should be AVR32_CLOCK_PLL0_OSC1 and AVR32_CLOCK_PLL1_OSC1.
2015-09-01 13:47:06 -04:00
Gregory Nutt
fa9522da41
Missed one file in last commit
2015-08-24 14:30:58 -06:00
Gregory Nutt
0843af5367
Fixes that call sched_resume_scheduler and sched_suspend_scheduler must include nuttx/sched.h
2015-07-29 16:51:26 -06:00
Gregory Nutt
eddf8161a5
Add scheduler resume/suspend calls to all implementations of up_release_pending()
2015-07-26 10:13:29 -06:00
Gregory Nutt
37969b8279
Add scheduler resume/suspend calls to all implementations of up_reprioritize_rtr()
2015-07-26 09:46:28 -06:00
Gregory Nutt
838c5355eb
Correct resume scheduler hooks and add suspend scheduler hooks to all implementations of up_unblock_task
2015-07-26 09:07:47 -06:00
Gregory Nutt
a92c0a10ab
Add scheduler resume/suspend calls in all implementations of up_block_task()
2015-07-26 08:31:23 -06:00
Gregory Nutt
9d98177daa
Add logic to reset the replenish the sporadic scheduler when a task is resumed
2015-07-24 09:54:28 -06:00
Gregory Nutt
e9a3cc3457
Remove the arch/ subdirectory; replace it with a submodule
2015-07-22 10:56:22 -06:00
Gregory Nutt
8e4f3bddb6
Add CONFIG_NETDEV_LATEINIT that can be used to suppress calls to up_netinitialize() from early initialization
2015-07-17 07:20:16 -06:00
Gregory Nutt
652371c919
Add CONFIG_NETDEV_LATEINIT that can be used to suppress calls to up_netinitialize() from early initialization
2015-07-17 07:20:16 -06:00
Gregory Nutt
fb926e7283
Fix references to the no-longer-existent misc/ directory in comments, README files, and documentation
2015-06-28 08:08:57 -06:00
Gregory Nutt
342f5fe33d
Fix references to the no-longer-existent misc/ directory in comments, README files, and documentation
2015-06-28 08:08:57 -06:00
Gregory Nutt
29136e51cc
Clean up and review of header files for conformance to standards
2015-06-12 19:26:01 -06:00
Gregory Nutt
b578c98fa9
Clean up and review of header files for conformance to standards
2015-06-12 19:26:01 -06:00
Gregory Nutt
c07a9632cc
Clean up and review of header files for conformance to standards
2015-06-12 19:17:42 -06:00
Gregory Nutt
c5b15d0b31
Clean up and review of header files for conformance to standards
2015-06-12 19:17:42 -06:00
Gregory Nutt
7bd3d5eaf1
Clean up and review of header files for conformance to standards
2015-06-12 19:00:52 -06:00
Gregory Nutt
be0fb09250
Clean up and review of header files for conformance to standards
2015-06-12 19:00:52 -06:00
Gregory Nutt
d77a19f0a2
Two r's and only two r's in the word interrupt
2015-04-23 14:04:43 -06:00
Gregory Nutt
0092f79696
Two r's and only two r's in the word interrupt
2015-04-23 14:04:43 -06:00
Gregory Nutt
ae15c6963c
Make some file section headers more consistent with standard
2015-04-08 08:04:12 -06:00
Gregory Nutt
16814e2b00
Make some file section headers more consistent with standard
2015-04-08 08:04:12 -06:00
Gregory Nutt
a5043d5e60
Add support for dumping board-specific information on assertion. From David Sidrane
2015-03-04 07:00:29 -06:00
Gregory Nutt
76007d28f5
Add support for dumping board-specific information on assertion. From David Sidrane
2015-03-04 07:00:29 -06:00
Gregory Nutt
429863f348
arch/: board function prototypes are now in include/nuttx/board.h. Remove from architecture header file; Add inclusion of nuttx/board.h to all files referencing board functions
2015-02-27 17:19:38 -06:00
Gregory Nutt
beaf976626
arch/: board function prototypes are now in include/nuttx/board.h. Remove from architecture header file; Add inclusion of nuttx/board.h to all files referencing board functions
2015-02-27 17:19:38 -06:00
Gregory Nutt
f0d318c124
Big, very risky change: Remove all occurrences of up_maskack_irq() that disable and enable interrupts with up_ack_irq() that only acknowledges the interrupts. This is only used in interrupt decoding logic. Also remove the logic that unconditionally re-enables interrupts with the interrupt exits. This interferes with the drivers ability to control the interrupt state. This is a necessary, sweeping, global change and unfortunately impossible to test.
2015-02-09 16:12:11 -06:00
Gregory Nutt
4f9998b4a8
Big, very risky change: Remove all occurrences of up_maskack_irq() that disable and enable interrupts with up_ack_irq() that only acknowledges the interrupts. This is only used in interrupt decoding logic. Also remove the logic that unconditionally re-enables interrupts with the interrupt exits. This interferes with the drivers ability to control the interrupt state. This is a necessary, sweeping, global change and unfortunately impossible to test.
2015-02-09 16:12:11 -06:00
Gregory Nutt
8bac6b71ce
SYSLOG: Add an option to use the syslog'ing device as the system consolution. This option enables a low-level, write-only console device at /dev/console (similar to the low-level UART console device). From Pierre-noel Bouteville.
2015-02-08 06:53:24 -06:00
Gregory Nutt
3465cb6138
SYSLOG: Add an option to use the syslog'ing device as the system consolution. This option enables a low-level, write-only console device at /dev/console (similar to the low-level UART console device). From Pierre-noel Bouteville.
2015-02-08 06:53:24 -06:00
Gregory Nutt
30b141e2c8
Remove CONFIG_DEBUG_STACK. Adding CONFIG_STACK_COLORATION makes this configuration option pointless
2015-01-24 06:49:51 -06:00
Gregory Nutt
7e46e94546
Remove CONFIG_DEBUG_STACK. Adding CONFIG_STACK_COLORATION makes this configuration option pointless
2015-01-24 06:49:51 -06:00
Gregory Nutt
9588b0e7a7
All Ethernet drivers (again): Missed one place where arp_out() is called and neighber_out() needs to be called
2015-01-21 11:36:33 -06:00
Gregory Nutt
32d2a4c548
All Ethernet drivers (again): Missed one place where arp_out() is called and neighber_out() needs to be called
2015-01-21 11:36:33 -06:00
Gregory Nutt
723b7fc430
Networking: Modify all Ethernet drivers: Do neighbor look-up on all outgoing IPv6 packs in order to properly set the destination link layer address.
2015-01-20 15:52:25 -06:00
Gregory Nutt
1ad73c52b1
Networking: Modify all Ethernet drivers: Do neighbor look-up on all outgoing IPv6 packs in order to properly set the destination link layer address.
2015-01-20 15:52:25 -06:00
Gregory Nutt
f6063c3896
Networking: Add missing raw/packet socket support to all Ethernet drivers
2015-01-20 15:14:29 -06:00
Gregory Nutt
a53ae59284
Networking: Add missing raw/packet socket support to all Ethernet drivers
2015-01-20 15:14:29 -06:00
Gregory Nutt
07132f462f
Ethernet drivers: Use IFF_IS_IPv4 macro. Cannot rely on the EtherType being set correctly.
2015-01-20 06:26:14 -06:00
Gregory Nutt
92f440c20c
Ethernet drivers: Use IFF_IS_IPv4 macro. Cannot rely on the EtherType being set correctly.
2015-01-20 06:26:14 -06:00
Gregory Nutt
ac69e11a5f
Networking: All Ethernet drivers: Call ipv6_input if IPv6 is enabled and an IPv6 packet is received
2015-01-15 09:31:23 -06:00
Gregory Nutt
278c485229
Networking: All Ethernet drivers: Call ipv6_input if IPv6 is enabled and an IPv6 packet is received
2015-01-15 09:31:23 -06:00
Gregory Nutt
836a8b1625
- Rename devif_input() ipv4_input()
...
- Copy net/devif/devif_input.c to ipv6_input.c. Remove all IPv4-specific logic.
- Rename net/devif/devif_input.c to ipv4_input.c. Remove all IPv6-specific logic
- Split IPv4 header structure out as net_ipv4hdr_s from net_iphdr_s
2015-01-15 08:03:56 -06:00
Gregory Nutt
89538ac4a2
- Rename devif_input() ipv4_input()
...
- Copy net/devif/devif_input.c to ipv6_input.c. Remove all IPv4-specific logic.
- Rename net/devif/devif_input.c to ipv4_input.c. Remove all IPv6-specific logic
- Split IPv4 header structure out as net_ipv4hdr_s from net_iphdr_s
2015-01-15 08:03:56 -06:00
Gregory Nutt
6bc54c3541
Networking: Condition certain ARP logic on CONFIG_NET_ARP in all Ethernet drivers
2015-01-15 07:07:39 -06:00
Gregory Nutt
2f4aa0bde7
Networking: Condition certain ARP logic on CONFIG_NET_ARP in all Ethernet drivers
2015-01-15 07:07:39 -06:00
Gregory Nutt
2c1f018e85
More fixes to problems noted by cppcheck. Some are kind of risky; some are real bugs.
2014-11-25 13:15:09 -06:00
Gregory Nutt
2994448d85
More fixes to problems noted by cppcheck. Some are kind of risky; some are real bugs.
2014-11-25 13:15:09 -06:00
Gregory Nutt
2330c9c842
Rename CONFIG_NET_BUFSIZE to CONFIG_NET_ETH_MTU is all MCU Ethernet drivers
2014-11-16 08:10:06 -06:00
Gregory Nutt
63526fb1ef
Rename CONFIG_NET_BUFSIZE to CONFIG_NET_ETH_MTU is all MCU Ethernet drivers
2014-11-16 08:10:06 -06:00
Gregory Nutt
bf984b2b3a
Netwoek: Ada a parameter to netdev_register() to indicate the link protocol supported by the driver. Use this value to replace some logic commited yesterday
2014-11-15 08:22:51 -06:00
Gregory Nutt
388ef8db1a
Netwoek: Ada a parameter to netdev_register() to indicate the link protocol supported by the driver. Use this value to replace some logic commited yesterday
2014-11-15 08:22:51 -06:00
Gregory Nutt
db9901e2f9
Update everything under nuttx/arch to use the corrected syslog interfaces
2014-10-08 12:48:47 -06:00
Gregory Nutt
7b310711a1
Update everything under nuttx/arch to use the corrected syslog interfaces
2014-10-08 12:48:47 -06:00
Gregory Nutt
eb5e1616f4
Move include/nuttx/gran.h to include/nuttx/mm/gran.h
2014-09-24 06:55:26 -06:00
Gregory Nutt
2fa7431ee7
Move include/nuttx/gran.h to include/nuttx/mm/gran.h
2014-09-24 06:55:26 -06:00
Gregory Nutt
998c5ee0a9
Trivial kernel build related fixes for consistency
2014-09-11 12:35:23 -06:00
Gregory Nutt
17e798993d
Trivial kernel build related fixes for consistency
2014-09-11 12:35:23 -06:00
Gregory Nutt
006cf7d745
Add logic to initialize the per-process user heap when each user process is started
2014-09-10 15:55:36 -06:00
Gregory Nutt
205c23b9d6
Add logic to initialize the per-process user heap when each user process is started
2014-09-10 15:55:36 -06:00
Gregory Nutt
3dd3b1f5e2
The 'make export' target needs to bundle up the user C startup file (crt0), not the kernel head object
2014-09-04 13:31:34 -06:00
Gregory Nutt
56dc80cf59
The 'make export' target needs to bundle up the user C startup file (crt0), not the kernel head object
2014-09-04 13:31:34 -06:00
Gregory Nutt
31b8137956
There used to be two ways to pass parameters to new tasks, depending upon the configuration: Either (1) argv[] as created as an array with each string strdup'ed. Or (1) argv[] array and strings were created on the stack before the new task was started. Now, there is only one way, way (1). Way (2) might be slightly more compact, but this is not worth carry the complexity of two different ways of doing the same thing.
2014-09-01 15:39:34 -06:00
Gregory Nutt
64ab35b399
There used to be two ways to pass parameters to new tasks, depending upon the configuration: Either (1) argv[] as created as an array with each string strdup'ed. Or (1) argv[] array and strings were created on the stack before the new task was started. Now, there is only one way, way (1). Way (2) might be slightly more compact, but this is not worth carry the complexity of two different ways of doing the same thing.
2014-09-01 15:39:34 -06:00
Gregory Nutt
ec086adfae
Reanem kzalloc to kmm_zalloc for consistency
2014-08-31 17:34:44 -06:00
Gregory Nutt
205260d5e2
Reanem kzalloc to kmm_zalloc for consistency
2014-08-31 17:34:44 -06:00
Gregory Nutt
10ca085b09
Rename kmalloc to kmm_malloc for consistency
2014-08-31 17:26:36 -06:00
Gregory Nutt
1780810d3d
Rename kmalloc to kmm_malloc for consistency
2014-08-31 17:26:36 -06:00
Gregory Nutt
bcb5a5316e
Rename kumalloc to kumm_malloc and kuzalloc to kumm_zalloc for consistency with other naming
2014-08-31 16:24:24 -06:00
Gregory Nutt
9aca0c1c84
Rename kumalloc to kumm_malloc and kuzalloc to kumm_zalloc for consistency with other naming
2014-08-31 16:24:24 -06:00
Gregory Nutt
e11679acf8
Rename CONFIG_NUTTX_KERNEL to CONFIG_BUILD_PROTECTED; Partially integrate new CONFIG_BUILD_KERNEL
2014-08-29 14:47:22 -06:00
Gregory Nutt
e3ff0689bb
Rename CONFIG_NUTTX_KERNEL to CONFIG_BUILD_PROTECTED; Partially integrate new CONFIG_BUILD_KERNEL
2014-08-29 14:47:22 -06:00
Gregory Nutt
35b11a7533
Fix an error introduced into ALL implmentations of interrupt dispatch logic
2014-08-28 08:41:57 -06:00
Gregory Nutt
45f3328247
Fix an error introduced into ALL implmentations of interrupt dispatch logic
2014-08-28 08:41:57 -06:00
Gregory Nutt
8bdde7b2d1
Add address environment support to ALL implementatins of up_release_pending()
2014-08-28 08:10:19 -06:00
Gregory Nutt
dfdaeb31ac
Add address environment support to ALL implementatins of up_release_pending()
2014-08-28 08:10:19 -06:00
Gregory Nutt
1b24afe6fc
Add address environment support to ALL implementatins of up_reprioritize_rtr()
2014-08-28 07:54:07 -06:00
Gregory Nutt
9598412386
Add address environment support to ALL implementatins of up_reprioritize_rtr()
2014-08-28 07:54:07 -06:00
Gregory Nutt
c61a64e44e
Z80: Move address environment switch from the task switchers to the interrupt handler. That may save doing the action multiple times per interrupt
2014-08-28 07:38:05 -06:00
Gregory Nutt
4b65c894f6
Z80: Move address environment switch from the task switchers to the interrupt handler. That may save doing the action multiple times per interrupt
2014-08-28 07:38:05 -06:00
Gregory Nutt
756054d745
Add ADDRENV support to ALL implmentations of _exit()
2014-08-27 16:31:02 -06:00
Gregory Nutt
9bc9d2d86d
Add ADDRENV support to ALL implmentations of _exit()
2014-08-27 16:31:02 -06:00
Gregory Nutt
7055bce8b4
Add ADDRENV support to ALL implementations of up_unblock_task()
2014-08-27 16:15:46 -06:00
Gregory Nutt
4d24c48901
Add ADDRENV support to ALL implementations of up_unblock_task()
2014-08-27 16:15:46 -06:00
Gregory Nutt
5bf114e604
Add ADDRENV support to all implementations of up_block_task()
2014-08-27 15:36:52 -06:00
Gregory Nutt
57c066b7a3
Add ADDRENV support to all implementations of up_block_task()
2014-08-27 15:36:52 -06:00
Gregory Nutt
032ff50313
Add up_addrenv_coherent which will be called before address environment switches
2014-08-26 14:53:19 -06:00
Gregory Nutt
0db7da1858
Add up_addrenv_coherent which will be called before address environment switches
2014-08-26 14:53:19 -06:00
Gregory Nutt
e8094292e3
Rename up_addrenv_assign() to up_addrenv_clone() and generalize its arguments so that can be used for other purposes
2014-08-26 12:16:05 -06:00
Gregory Nutt
b13d9b4161
Rename up_addrenv_assign() to up_addrenv_clone() and generalize its arguments so that can be used for other purposes
2014-08-26 12:16:05 -06:00
Gregory Nutt
699a54a022
Misc changed to get the SAMA5 ELF configuration with address environments working
2014-08-25 13:28:13 -06:00
Gregory Nutt
1725946447
Misc changed to get the SAMA5 ELF configuration with address environments working
2014-08-25 13:28:13 -06:00
Gregory Nutt
dde84a0a20
addrenv interface changes: up_addrenv_create() may need to create .text and .bss/.data separately because of differing access privileges (read/execute vs read/write). And, as a consequence, up_addrenv_vaddr() needs to be split into up_addrenv_vtext(0 and up_addrenv_vdata().
2014-08-24 11:54:14 -06:00
Gregory Nutt
241a7e17bd
addrenv interface changes: up_addrenv_create() may need to create .text and .bss/.data separately because of differing access privileges (read/execute vs read/write). And, as a consequence, up_addrenv_vaddr() needs to be split into up_addrenv_vtext(0 and up_addrenv_vdata().
2014-08-24 11:54:14 -06:00
Gregory Nutt
95c79c675c
Add addrenv.h; First cut at Cortex-A address environment structures; Add configuration options to setup address enviornment
2014-08-24 09:57:53 -06:00
Gregory Nutt
2cb9d5c7b0
Add addrenv.h; First cut at Cortex-A address environment structures; Add configuration options to setup address enviornment
2014-08-24 09:57:53 -06:00
Gregory Nutt
66abb71c57
Change CONFIG_ADDRENV to CONFIG_ARCH_ADDRENV; change how it is selected -- the architecure must first declare support
2014-08-24 06:42:11 -06:00
Gregory Nutt
1624e2fbcf
Change CONFIG_ADDRENV to CONFIG_ARCH_ADDRENV; change how it is selected -- the architecure must first declare support
2014-08-24 06:42:11 -06:00
Gregory Nutt
f58ba70547
A few fixes for compilation errors due to recent address environment fixes
2014-08-22 15:55:00 -06:00
Gregory Nutt
e79d6e3c8b
A few fixes for compilation errors due to recent address environment fixes
2014-08-22 15:55:00 -06:00
Gregory Nutt
d40553b538
An address environment is the property of a task group, not of a thread
2014-08-22 12:32:34 -06:00
Gregory Nutt
1d586e6136
An address environment is the property of a task group, not of a thread
2014-08-22 12:32:34 -06:00
Gregory Nutt
2bc16b2ba5
wdog.h does not contain any application interface, only internal OS interface. Further, it is non-standard. Move wdog.h from include/ to include/nuttx. For the same reason, move the description of the watchdog timer interfaces from the Users Guide to the Porting Guide.
2014-08-21 11:16:55 -06:00
Gregory Nutt
ad9b3f8ab8
wdog.h does not contain any application interface, only internal OS interface. Further, it is non-standard. Move wdog.h from include/ to include/nuttx. For the same reason, move the description of the watchdog timer interfaces from the Users Guide to the Porting Guide.
2014-08-21 11:16:55 -06:00
Gregory Nutt
6455f60c60
Remove os_internal.h it has been replace by several new header files under sched/. There have been some sneak inclusion paths via os_internal.h, so expect a few compilation errors for some architectures
2014-08-08 18:39:28 -06:00
Gregory Nutt
e1769b22f1
Remove os_internal.h it has been replace by several new header files under sched/. There have been some sneak inclusion paths via os_internal.h, so expect a few compilation errors for some architectures
2014-08-08 18:39:28 -06:00
Gregory Nutt
4dc151097e
Replace os_internal.h with sched/sched.h in files that actually reference something in sched.h
2014-08-08 17:53:55 -06:00
Gregory Nutt
d798dd37a7
Replace os_internal.h with sched/sched.h in files that actually reference something in sched.h
2014-08-08 17:53:55 -06:00
Gregory Nutt
c98ece6bec
Move task control files from sched/ to sched/task
2014-08-08 16:44:08 -06:00
Gregory Nutt
23a334c066
Move task control files from sched/ to sched/task
2014-08-08 16:44:08 -06:00
Gregory Nutt
1c99d53bb1
Move clock functions from sched/ to sched/clock
2014-08-08 14:43:02 -06:00
Gregory Nutt
d4b56eb3cc
Move clock functions from sched/ to sched/clock
2014-08-08 14:43:02 -06:00
Gregory Nutt
39183d37b8
Change all time conversions. Yech. New timer units in microseconds breaks all existing logic that used milliseconds in the conversions. Something likely got broken doing this, probably because I confused a MSEC2TICK conversion with a TICK2MSEC conversion. Also, the tickless OS no appears fully functional and passes the OS test on the simulator with no errors
2014-08-07 18:00:38 -06:00
Gregory Nutt
c9661ad5a7
Change all time conversions. Yech. New timer units in microseconds breaks all existing logic that used milliseconds in the conversions. Something likely got broken doing this, probably because I confused a MSEC2TICK conversion with a TICK2MSEC conversion. Also, the tickless OS no appears fully functional and passes the OS test on the simulator with no errors
2014-08-07 18:00:38 -06:00
Gregory Nutt
594083d870
Rename up_timerinit() to up_timer_initailize(); Add prototypes for candidate interfaces for the tickless OS; Don't build existing timer initialization logic if CONFIG_SCHED_TICKLESS is defined.
2014-08-06 16:26:01 -06:00
Gregory Nutt
736d3c169a
Rename up_timerinit() to up_timer_initailize(); Add prototypes for candidate interfaces for the tickless OS; Don't build existing timer initialization logic if CONFIG_SCHED_TICKLESS is defined.
2014-08-06 16:26:01 -06:00
Gregory Nutt
8bbbc5b255
Cosmetic changes to comments
2014-07-29 07:17:01 -06:00
Gregory Nutt
2861636015
Cosmetic changes to comments
2014-07-29 07:17:01 -06:00
Gregory Nutt
d7fe256821
NET: emoved all includes of uip.h; added includes of ip.h wherever needed. Tried to fix problems of the now missing sneak inclusions because uip.h was removed. There are probably a few of these that were missed.
2014-07-04 19:13:08 -06:00
Gregory Nutt
60246e613b
NET: emoved all includes of uip.h; added includes of ip.h wherever needed. Tried to fix problems of the now missing sneak inclusions because uip.h was removed. There are probably a few of these that were missed.
2014-07-04 19:13:08 -06:00
Gregory Nutt
99ce3a44d7
Remove all inclusion of uip.h
2014-07-04 16:58:22 -06:00
Gregory Nutt
0bb153b8cb
Remove all inclusion of uip.h
2014-07-04 16:58:22 -06:00
Gregory Nutt
11e3a21411
NET: More renaming
2014-07-04 15:40:49 -06:00
Gregory Nutt
cce35ce975
NET: More renaming
2014-07-04 15:40:49 -06:00
Gregory Nutt
400edda109
NET: Rename XYZ_uiptxpoll to just XYZ_txpoll
2014-07-01 18:41:08 -06:00
Gregory Nutt
313982ba18
NET: Rename XYZ_uiptxpoll to just XYZ_txpoll
2014-07-01 18:41:08 -06:00
Gregory Nutt
621ec21bfd
Rename uip_poll->devif_poll and uip_timer->devif_timer
2014-06-30 18:40:41 -06:00
Gregory Nutt
b0c1b7ef47
Rename uip_poll->devif_poll and uip_timer->devif_timer
2014-06-30 18:40:41 -06:00
Gregory Nutt
ade8807a61
Rename uip_input to devif_input
2014-06-30 18:11:17 -06:00
Gregory Nutt
da7379ed18
Rename uip_input to devif_input
2014-06-30 18:11:17 -06:00
Gregory Nutt
e4990dda4d
Rename uip_driver_s net_driver_s
2014-06-27 16:48:12 -06:00
Gregory Nutt
fce2a79abd
Rename uip_driver_s net_driver_s
2014-06-27 16:48:12 -06:00
Gregory Nutt
57383ea2f3
Rename ip_eth_hdr to eth_hdr_s
2014-06-25 09:57:52 -06:00
Gregory Nutt
621097b6c8
Rename ip_eth_hdr to eth_hdr_s
2014-06-25 09:57:52 -06:00
Gregory Nutt
11896e1481
Move the remaining files from include/nuttx/net/uip to include/nuttx/net; Rename *_internal.h header files in net/ to just *.h
2014-06-24 10:14:15 -06:00
Gregory Nutt
5d1f8180d4
Move the remaining files from include/nuttx/net/uip to include/nuttx/net; Rename *_internal.h header files in net/ to just *.h
2014-06-24 10:14:15 -06:00
Gregory Nutt
b34a1f1e01
Move include/nuttx/net/uip/uip-arch.h to include/nuttx/net/netdev.h
2014-06-24 09:28:44 -06:00
Gregory Nutt
37646044ac
Move include/nuttx/net/uip/uip-arch.h to include/nuttx/net/netdev.h
2014-06-24 09:28:44 -06:00
Gregory Nutt
407e72b300
Move include/nuttx/net/uip/uip-arch.h to include/nuttx/net/arp.h; rename all uip_arp_ functions to arp_
2014-05-30 12:13:06 -06:00
Gregory Nutt
90e4b55e0c
Move include/nuttx/net/uip/uip-arch.h to include/nuttx/net/arp.h; rename all uip_arp_ functions to arp_
2014-05-30 12:13:06 -06:00
Gregory Nutt
af2bb81ac2
Add serial method so that lower half driver can provide RX flow control information. From Jussi Kivilinna
2014-05-08 09:00:33 -06:00
Gregory Nutt
7594d8b8cf
Add serial method so that lower half driver can provide RX flow control information. From Jussi Kivilinna
2014-05-08 09:00:33 -06:00
Gregory Nutt
ae82fa65a6
Fix spelling, only one t in exiting
2014-04-27 15:49:38 -06:00
Gregory Nutt
40972de8d7
Fix spelling, only one t in exiting
2014-04-27 15:49:38 -06:00
Gregory Nutt
9d2ce57650
Removing more trailing whitespace
2014-04-13 17:54:59 -06:00
Gregory Nutt
1836e4eb6b
Removing more trailing whitespace
2014-04-13 17:54:59 -06:00
Gregory Nutt
25d4ff745b
More trailing whilespace removal
2014-04-13 16:22:22 -06:00
Gregory Nutt
f8024cf409
More trailing whilespace removal
2014-04-13 16:22:22 -06:00
Gregory Nutt
c708eff608
Make sure that there is one space after for
2014-04-12 13:28:22 -06:00
Gregory Nutt
494387b33b
Make sure that there is one space after for
2014-04-12 13:28:22 -06:00
Gregory Nutt
c0bf638798
SAMA5: Add support for DBGU. Xplained board now uses DBGU for the serial console
2014-04-01 11:24:15 -06:00
Gregory Nutt
cbdc9155ab
SAMA5: Add support for DBGU. Xplained board now uses DBGU for the serial console
2014-04-01 11:24:15 -06:00
Gregory Nutt
5b9f1f54c2
Add option to dump buffered USB trace data on an assertion
2014-03-20 10:56:30 -06:00
Gregory Nutt
a2d53bf950
Add option to dump buffered USB trace data on an assertion
2014-03-20 10:56:30 -06:00
Gregory Nutt
e4c4ab5ef2
onfigs/ez80f910200zco/nettest: Configuration converted to use the kconfig-frontends tools
2014-03-03 11:40:29 -06:00
Gregory Nutt
2c1b3188e7
onfigs/ez80f910200zco/nettest: Configuration converted to use the kconfig-frontends tools
2014-03-03 11:40:29 -06:00
Gregory Nutt
b3792fcd86
Many changes to reduce complaints from CppCheck. Several latent bugs fixes, but probably some new typos introduced
2014-02-10 18:08:49 -06:00
Gregory Nutt
91b002a043
Many changes to reduce complaints from CppCheck. Several latent bugs fixes, but probably some new typos introduced
2014-02-10 18:08:49 -06:00
Gregory Nutt
a26b03d0d0
rename up_led*() functions to board_led_*()
2014-01-24 14:28:49 -06:00
Gregory Nutt
2f837ccd2a
rename up_led*() functions to board_led_*()
2014-01-24 14:28:49 -06:00
Gregory Nutt
74b2ac023d
Various changes for a clean ZNEO ZDS-II build
2013-12-19 10:01:52 -06:00
Gregory Nutt
a00e2987c4
Various changes for a clean ZNEO ZDS-II build
2013-12-19 10:01:52 -06:00
Gregory Nutt
d01808c603
LM: Don't initialize .data if running in SRAM. Global missing intialize type. SAMA5 NAND: Fix for read nand in smaller chunks
2013-12-05 10:37:55 -06:00
Gregory Nutt
692b087d07
LM: Don't initialize .data if running in SRAM. Global missing intialize type. SAMA5 NAND: Fix for read nand in smaller chunks
2013-12-05 10:37:55 -06:00
Gregory Nutt
4aaee6fb3c
Clean up some naming: fd vs. fildes vs. filedes and filep vs filp
2013-09-28 16:50:07 -06:00
Gregory Nutt
417f67c132
Clean up some naming: fd vs. fildes vs. filedes and filep vs filp
2013-09-28 16:50:07 -06:00
Gregory Nutt
2f772c84fd
Finally... renamed all CONFIG_DRAM_ settings to CONFIG_RAM_
2013-07-26 10:09:17 -06:00
Gregory Nutt
70f0ffdfc5
Finally... renamed all CONFIG_DRAM_ settings to CONFIG_RAM_
2013-07-26 10:09:17 -06:00
Gregory Nutt
a954eb76b2
Created new directories to hold SPI-related files
2013-07-01 08:11:54 -06:00
Gregory Nutt
09faaccc02
Created new directories to hold SPI-related files
2013-07-01 08:11:54 -06:00
Gregory Nutt
f0c36e422f
Upate .gitignore files. Add .dSYM. Make sure / is present where needed. Add some missing .gitignore files
2013-05-30 14:45:31 -06:00
Gregory Nutt
7554d2888e
Upate .gitignore files. Add .dSYM. Make sure / is present where needed. Add some missing .gitignore files
2013-05-30 14:45:31 -06:00
Gregory Nutt
98787f4717
Various changes and bigfixes for problems detected by CppCheck
2013-05-09 14:23:34 -06:00
Gregory Nutt
88c0911fb1
Various changes and bigfixes for problems detected by CppCheck
2013-05-09 14:23:34 -06:00
Gregory Nutt
3aa94411be
Remove up_assert_code
2013-04-25 15:19:59 -06:00
Gregory Nutt
86b815373a
Remove up_assert_code
2013-04-25 15:19:59 -06:00
Gregory Nutt
91e6580aff
Adding missing registration of /dev/zero; Condition registration of /dev/null. From Ken Petit
2013-04-24 07:17:49 -06:00
Gregory Nutt
69d3978837
Adding missing registration of /dev/zero; Condition registration of /dev/null. From Ken Petit
2013-04-24 07:17:49 -06:00
Gregory Nutt
803a860d34
New Kconfig convention: Extra indentation in comments will render as HTML preformatted text
2013-04-22 09:10:58 -06:00
Gregory Nutt
b553609351
New Kconfig convention: Extra indentation in comments will render as HTML preformatted text
2013-04-22 09:10:58 -06:00
Gregory Nutt
65fec0683a
_exit() should not call atexit() or on_exit() functions; Rename task_deletecurrent() to task_exit()
2013-04-18 16:15:20 -06:00
Gregory Nutt
5187631e30
_exit() should not call atexit() or on_exit() functions; Rename task_deletecurrent() to task_exit()
2013-04-18 16:15:20 -06:00
Gregory Nutt
1a07e950ea
Move LPC17xx IOCON register definitions from lpc17_gpio.h to lpc17_iocon.h; fix a few more .gitignore files
2013-04-04 18:12:44 -06:00
Gregory Nutt
e94faba7f5
Move LPC17xx IOCON register definitions from lpc17_gpio.h to lpc17_iocon.h; fix a few more .gitignore files
2013-04-04 18:12:44 -06:00
Gregory Nutt
1694955188
Clone svn:ignore directory atributed to .gitignore files
2013-04-04 14:27:29 -06:00
Gregory Nutt
23db0682b7
Clone svn:ignore directory atributed to .gitignore files
2013-04-04 14:27:29 -06:00
patacongo
e29d6479c9
Corrections needed after further test of stack-based task arguments
...
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5771 42af7a65-404d-4744-a932-0658087f49c3
2013-03-21 23:37:11 +00:00
patacongo
a31d1f331b
Corrections needed after further test of stack-based task arguments
...
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5771 42af7a65-404d-4744-a932-0658087f49c3
2013-03-21 23:37:11 +00:00
patacongo
c496b7aad9
Copy siginfo_t to step before calling a user-space signal handler
...
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5769 42af7a65-404d-4744-a932-0658087f49c3
2013-03-21 20:02:14 +00:00
patacongo
ee885b45d8
Copy siginfo_t to step before calling a user-space signal handler
...
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5769 42af7a65-404d-4744-a932-0658087f49c3
2013-03-21 20:02:14 +00:00
patacongo
a7b37da2d9
Add a up_stack_frame() interface to allocate a frame of data on a task's stack.
...
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5768 42af7a65-404d-4744-a932-0658087f49c3
2013-03-21 17:35:08 +00:00
patacongo
170952d6e8
Add a up_stack_frame() interface to allocate a frame of data on a task's stack.
...
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5768 42af7a65-404d-4744-a932-0658087f49c3
2013-03-21 17:35:08 +00:00
patacongo
c86f502f2e
In the kernel build, allocate the stacks for kernel threads from the kernel heap so that they are protected from medddling by the applications
...
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5766 42af7a65-404d-4744-a932-0658087f49c3
2013-03-20 20:27:08 +00:00
patacongo
f58faf514e
In the kernel build, allocate the stacks for kernel threads from the kernel heap so that they are protected from medddling by the applications
...
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5766 42af7a65-404d-4744-a932-0658087f49c3
2013-03-20 20:27:08 +00:00
patacongo
020cc2248e
Change prototypes of up_create_stack and up_release_stack to include a task type parameter
...
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5765 42af7a65-404d-4744-a932-0658087f49c3
2013-03-20 18:22:21 +00:00
patacongo
3bf2c1b355
Change prototypes of up_create_stack and up_release_stack to include a task type parameter
...
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5765 42af7a65-404d-4744-a932-0658087f49c3
2013-03-20 18:22:21 +00:00
patacongo
229d3c4085
Fix a typo that crept into lpc17_allocateheap.c in the recent kernel allocator changes
...
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5729 42af7a65-404d-4744-a932-0658087f49c3
2013-03-11 13:21:33 +00:00
patacongo
2b64d4742a
Fix a typo that crept into lpc17_allocateheap.c in the recent kernel allocator changes
...
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5729 42af7a65-404d-4744-a932-0658087f49c3
2013-03-11 13:21:33 +00:00
patacongo
3dc5b1fa9f
Create sched_ufree and sched_kfree from sched_free; Use user-accessible heap to allocae stacks
...
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5725 42af7a65-404d-4744-a932-0658087f49c3
2013-03-10 15:32:33 +00:00
patacongo
1ef904003e
Create sched_ufree and sched_kfree from sched_free; Use user-accessible heap to allocae stacks
...
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5725 42af7a65-404d-4744-a932-0658087f49c3
2013-03-10 15:32:33 +00:00
patacongo
e47c64204c
More changes for a kernel-mode allocator (more to be done)
...
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5724 42af7a65-404d-4744-a932-0658087f49c3
2013-03-09 21:12:20 +00:00
patacongo
1c52dce216
More changes for a kernel-mode allocator (more to be done)
...
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5724 42af7a65-404d-4744-a932-0658087f49c3
2013-03-09 21:12:20 +00:00
patacongo
81353c7a76
up_addregion should use kmm_addregion; move garbage kmm*.c file to mm/. for now
...
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5721 42af7a65-404d-4744-a932-0658087f49c3
2013-03-08 22:01:50 +00:00
patacongo
0db8dc83ee
up_addregion should use kmm_addregion; move garbage kmm*.c file to mm/. for now
...
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5721 42af7a65-404d-4744-a932-0658087f49c3
2013-03-08 22:01:50 +00:00
patacongo
9207732f18
Add debug output when memory allocations fail
...
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5686 42af7a65-404d-4744-a932-0658087f49c3
2013-02-28 15:31:58 +00:00
patacongo
be1b67a1a2
Add debug output when memory allocations fail
...
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5686 42af7a65-404d-4744-a932-0658087f49c3
2013-02-28 15:31:58 +00:00
patacongo
f84c45c220
Some NuTiny-SDK-NUC120 size reduction; All serial driver vtables should be static const
...
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5683 42af7a65-404d-4744-a932-0658087f49c3
2013-02-27 22:24:49 +00:00
patacongo
d621681866
Some NuTiny-SDK-NUC120 size reduction; All serial driver vtables should be static const
...
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5683 42af7a65-404d-4744-a932-0658087f49c3
2013-02-27 22:24:49 +00:00
patacongo
bc69dc2c5a
Rename _TCB to struct tcb_s
...
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5610 42af7a65-404d-4744-a932-0658087f49c3
2013-02-04 18:46:28 +00:00
patacongo
b48009644f
Rename _TCB to struct tcb_s
...
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5610 42af7a65-404d-4744-a932-0658087f49c3
2013-02-04 18:46:28 +00:00
patacongo
b1aa82fcca
Add syslog.h; rename lib_rawprintf() to syslog()
...
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5578 42af7a65-404d-4744-a932-0658087f49c3
2013-01-28 21:55:16 +00:00
patacongo
ad430fc198
Add syslog.h; rename lib_rawprintf() to syslog()
...
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5578 42af7a65-404d-4744-a932-0658087f49c3
2013-01-28 21:55:16 +00:00
patacongo
1b8979d24f
Serial driver needed even when no console; Fix user LED settings in all STM32 configurations
...
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5575 42af7a65-404d-4744-a932-0658087f49c3
2013-01-28 15:03:17 +00:00
patacongo
40717da192
Serial driver needed even when no console; Fix user LED settings in all STM32 configurations
...
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5575 42af7a65-404d-4744-a932-0658087f49c3
2013-01-28 15:03:17 +00:00
patacongo
6cfe0a45e9
Move stream data from TCB to task group structure.
...
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5569 42af7a65-404d-4744-a932-0658087f49c3
2013-01-26 22:25:21 +00:00
patacongo
a71843ef91
Move stream data from TCB to task group structure.
...
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5569 42af7a65-404d-4744-a932-0658087f49c3
2013-01-26 22:25:21 +00:00
patacongo
43659b5840
Move file data from TCB to task group
...
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5567 42af7a65-404d-4744-a932-0658087f49c3
2013-01-26 20:17:29 +00:00
patacongo
ff293217de
Move file data from TCB to task group
...
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5567 42af7a65-404d-4744-a932-0658087f49c3
2013-01-26 20:17:29 +00:00
patacongo
71a8d7d104
Fix poll/select issue reported by Qiang
...
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5559 42af7a65-404d-4744-a932-0658087f49c3
2013-01-24 19:19:38 +00:00
patacongo
a59665cddc
Fix poll/select issue reported by Qiang
...
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5559 42af7a65-404d-4744-a932-0658087f49c3
2013-01-24 19:19:38 +00:00
patacongo
1a4baed866
Mostly costmetic updates
...
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5452 42af7a65-404d-4744-a932-0658087f49c3
2012-12-23 17:32:41 +00:00
patacongo
7c7a0d4f24
Mostly costmetic updates
...
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5452 42af7a65-404d-4744-a932-0658087f49c3
2012-12-23 17:32:41 +00:00
patacongo
8a32d15598
Restructre address environment interfaces in preparation for incorporation into binfmt/ logic
...
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5442 42af7a65-404d-4744-a932-0658087f49c3
2012-12-18 16:15:27 +00:00
patacongo
e88d94ffdc
Restructre address environment interfaces in preparation for incorporation into binfmt/ logic
...
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5442 42af7a65-404d-4744-a932-0658087f49c3
2012-12-18 16:15:27 +00:00
patacongo
7767f8a6c6
Add z180 system timer
...
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5438 42af7a65-404d-4744-a932-0658087f49c3
2012-12-15 15:03:35 +00:00
patacongo
1b4b47a706
Add z180 system timer
...
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5438 42af7a65-404d-4744-a932-0658087f49c3
2012-12-15 15:03:35 +00:00
patacongo
1fdf3f62a5
More z180 serial logic
...
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5437 42af7a65-404d-4744-a932-0658087f49c3
2012-12-14 19:15:07 +00:00
patacongo
89be734461
More z180 serial logic
...
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5437 42af7a65-404d-4744-a932-0658087f49c3
2012-12-14 19:15:07 +00:00
patacongo
3349fd8ba5
Add framework for z180 SCC driver
...
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5436 42af7a65-404d-4744-a932-0658087f49c3
2012-12-14 15:32:26 +00:00
patacongo
1a24e2be3e
Add framework for z180 SCC driver
...
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5436 42af7a65-404d-4744-a932-0658087f49c3
2012-12-14 15:32:26 +00:00
patacongo
c349a7f50e
Finsh Z80181/182 register bit definition
...
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5435 42af7a65-404d-4744-a932-0658087f49c3
2012-12-13 21:49:11 +00:00
patacongo
91daac1b7d
Finsh Z80181/182 register bit definition
...
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5435 42af7a65-404d-4744-a932-0658087f49c3
2012-12-13 21:49:11 +00:00
patacongo
a533fee128
Add special register definitions needed for z80181 and z80182
...
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5434 42af7a65-404d-4744-a932-0658087f49c3
2012-12-13 18:13:22 +00:00
patacongo
434b20ba68
Add special register definitions needed for z80181 and z80182
...
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5434 42af7a65-404d-4744-a932-0658087f49c3
2012-12-13 18:13:22 +00:00
patacongo
d913639a1b
Add z180 interrupt initialization logic
...
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5433 42af7a65-404d-4744-a932-0658087f49c3
2012-12-12 17:06:47 +00:00
patacongo
b899ad2220
Add z180 interrupt initialization logic
...
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5433 42af7a65-404d-4744-a932-0658087f49c3
2012-12-12 17:06:47 +00:00
patacongo
b18cccc4c7
Add z180 interrupt vectors
...
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5432 42af7a65-404d-4744-a932-0658087f49c3
2012-12-12 16:38:50 +00:00
patacongo
fb4f2c7de1
Add z180 interrupt vectors
...
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5432 42af7a65-404d-4744-a932-0658087f49c3
2012-12-12 16:38:50 +00:00
patacongo
44ac343969
Fix typo in z80-family Makefiles
...
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5431 42af7a65-404d-4744-a932-0658087f49c3
2012-12-12 00:07:15 +00:00
patacongo
d55d415e27
Fix typo in z80-family Makefiles
...
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5431 42af7a65-404d-4744-a932-0658087f49c3
2012-12-12 00:07:15 +00:00
patacongo
016220bf7a
Fix some early z180 compile errors
...
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5430 42af7a65-404d-4744-a932-0658087f49c3
2012-12-11 22:51:20 +00:00
patacongo
549429b675
Fix some early z180 compile errors
...
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5430 42af7a65-404d-4744-a932-0658087f49c3
2012-12-11 22:51:20 +00:00
patacongo
73bf4026c6
configs/p112: Add a configuration for the Z180 P112 board
...
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5429 42af7a65-404d-4744-a932-0658087f49c3
2012-12-11 21:42:15 +00:00
patacongo
cc0536eae9
configs/p112: Add a configuration for the Z180 P112 board
...
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5429 42af7a65-404d-4744-a932-0658087f49c3
2012-12-11 21:42:15 +00:00
patacongo
07827c3c61
Add support for the Z180 MMU and generic hooks for processes
...
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5428 42af7a65-404d-4744-a932-0658087f49c3
2012-12-11 18:04:04 +00:00
patacongo
0f218d0e00
Add support for the Z180 MMU and generic hooks for processes
...
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5428 42af7a65-404d-4744-a932-0658087f49c3
2012-12-11 18:04:04 +00:00
patacongo
ac24179c23
Add arch/z80/src/z180/z180_iomap.h
...
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5427 42af7a65-404d-4744-a932-0658087f49c3
2012-12-10 22:39:18 +00:00
patacongo
e47a38625f
Add arch/z80/src/z180/z180_iomap.h
...
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5427 42af7a65-404d-4744-a932-0658087f49c3
2012-12-10 22:39:18 +00:00
patacongo
c76ed560c0
Add source files for z180
...
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5426 42af7a65-404d-4744-a932-0658087f49c3
2012-12-10 18:40:01 +00:00
patacongo
de8d4b9a97
Add source files for z180
...
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5426 42af7a65-404d-4744-a932-0658087f49c3
2012-12-10 18:40:01 +00:00
patacongo
4dcc0fc313
Add header files for z180
...
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5425 42af7a65-404d-4744-a932-0658087f49c3
2012-12-10 17:03:34 +00:00
patacongo
fd08c16b8f
Add header files for z180
...
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5425 42af7a65-404d-4744-a932-0658087f49c3
2012-12-10 17:03:34 +00:00
patacongo
eb8348dfe4
configs/xtrs/ostest converted to kconfig-frontend and Windows native
...
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5421 42af7a65-404d-4744-a932-0658087f49c3
2012-12-08 23:21:34 +00:00
patacongo
620d1c9a33
configs/xtrs/ostest converted to kconfig-frontend and Windows native
...
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5421 42af7a65-404d-4744-a932-0658087f49c3
2012-12-08 23:21:34 +00:00
patacongo
dd7685b057
Fixes for configs/z80sim/pashello Windows native build
...
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5420 42af7a65-404d-4744-a932-0658087f49c3
2012-12-08 21:31:43 +00:00
patacongo
0970b0ec12
Fixes for configs/z80sim/pashello Windows native build
...
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5420 42af7a65-404d-4744-a932-0658087f49c3
2012-12-08 21:31:43 +00:00
patacongo
123a575c99
Verify redesigned Z80 build on native Windows
...
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5417 42af7a65-404d-4744-a932-0658087f49c3
2012-12-07 20:45:07 +00:00
patacongo
3cda2d7874
Verify redesigned Z80 build on native Windows
...
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5417 42af7a65-404d-4744-a932-0658087f49c3
2012-12-07 20:45:07 +00:00
patacongo
a0160fc71b
Redesign z80 build so that mkhpbase.sh bash script is not needed; remove support for older SDCC toolchains; Re-verify z80 build on Linux
...
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5416 42af7a65-404d-4744-a932-0658087f49c3
2012-12-07 19:02:57 +00:00
patacongo
080210ec99
Redesign z80 build so that mkhpbase.sh bash script is not needed; remove support for older SDCC toolchains; Re-verify z80 build on Linux
...
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5416 42af7a65-404d-4744-a932-0658087f49c3
2012-12-07 19:02:57 +00:00
patacongo
cd20adb63d
Patches from Petteri Aimonen + stdbool and rand() changes for Freddie Chopin
...
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5415 42af7a65-404d-4744-a932-0658087f49c3
2012-12-07 16:00:56 +00:00
patacongo
5306523bce
Patches from Petteri Aimonen + stdbool and rand() changes for Freddie Chopin
...
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5415 42af7a65-404d-4744-a932-0658087f49c3
2012-12-07 16:00:56 +00:00
patacongo
f98be9629b
z80sim/ostest now builds okay under Linux with SDCC 3.2.1
...
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5414 42af7a65-404d-4744-a932-0658087f49c3
2012-12-05 16:28:33 +00:00
patacongo
419bb814c5
z80sim/ostest now builds okay under Linux with SDCC 3.2.1
...
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5414 42af7a65-404d-4744-a932-0658087f49c3
2012-12-05 16:28:33 +00:00
patacongo
c1db098d16
Progress toward natvie z80 SDCC build -- still issues
...
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5413 42af7a65-404d-4744-a932-0658087f49c3
2012-12-05 15:01:11 +00:00
patacongo
571565a1e0
Progress toward natvie z80 SDCC build -- still issues
...
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5413 42af7a65-404d-4744-a932-0658087f49c3
2012-12-05 15:01:11 +00:00
patacongo
fba56d75ed
Progress toward a z80 native Windows build -- still needs some work
...
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5411 42af7a65-404d-4744-a932-0658087f49c3
2012-12-03 20:12:59 +00:00
patacongo
f9fa51b66f
Progress toward a z80 native Windows build -- still needs some work
...
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5411 42af7a65-404d-4744-a932-0658087f49c3
2012-12-03 20:12:59 +00:00
patacongo
fcd5e152f0
Convert configs/z80sim/ostest to Kconfig/mconf tool
...
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5409 42af7a65-404d-4744-a932-0658087f49c3
2012-12-03 15:33:24 +00:00
patacongo
9c6c636724
Convert configs/z80sim/ostest to Kconfig/mconf tool
...
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5409 42af7a65-404d-4744-a932-0658087f49c3
2012-12-03 15:33:24 +00:00
patacongo
cc9dacaa62
Add dummy Toolchain.defs files for z80 arch family
...
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5408 42af7a65-404d-4744-a932-0658087f49c3
2012-12-03 14:13:23 +00:00
patacongo
be90f87041
Add dummy Toolchain.defs files for z80 arch family
...
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5408 42af7a65-404d-4744-a932-0658087f49c3
2012-12-03 14:13:23 +00:00
patacongo
372c910446
z8 configurations all converted to use mconf tool
...
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5397 42af7a65-404d-4744-a932-0658087f49c3
2012-11-28 17:50:28 +00:00
patacongo
87f2b53ae8
z8 configurations all converted to use mconf tool
...
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5397 42af7a65-404d-4744-a932-0658087f49c3
2012-11-28 17:50:28 +00:00
patacongo
7efa9df77e
Verify that z8 targets still build (under Cygwin)
...
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5396 42af7a65-404d-4744-a932-0658087f49c3
2012-11-28 15:53:42 +00:00
patacongo
57419a9b19
Verify that z8 targets still build (under Cygwin)
...
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5396 42af7a65-404d-4744-a932-0658087f49c3
2012-11-28 15:53:42 +00:00
patacongo
5b81a279ca
ez80f910200zco/ostest now uses Kconfig
...
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5390 42af7a65-404d-4744-a932-0658087f49c3
2012-11-26 17:07:34 +00:00
patacongo
839f8e0f82
ez80f910200zco/ostest now uses Kconfig
...
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5390 42af7a65-404d-4744-a932-0658087f49c3
2012-11-26 17:07:34 +00:00