sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
35,560 Commits 1 Branch 0 Tags 291 MiB
73b86ee458
Commit Graph

35560 Commits

This Branch
This Branch
All Branches
Author SHA1 Message Date
Dave Marples
2b8cd24364 arch/arm/src/armv7-m/nvic.h: Add BPIALL register address. 2019-11-08 09:49:41 -06:00
Juha Niskanen
219d99451a drivers/syslog/syslog_device.c: Fix assert that assumes re-opened syslog file is the same. Logic in syslog_file_channel() is calling syslog_initialize() for the default syslog device as a recovery action after failed syslog_dev_initialize(). 2019-11-08 07:43:24 -06:00
Matias N
853e3e0086 arch/arm/src/stm32l4/stm32l4x6xx_rcc.c: This fix is needed if HSI clock is selected. Otherwise when waking up from STOP mode, the MSI clock is selected instead of the HSI clock. 2019-11-07 14:14:09 -06:00
Gregory Nutt
d31411189e net/netlink/Kconfig: Remove dependency on EXPERIMENTAL. Although the Netlink implementation is still only fragmentary, there is no usable functionality there and no reason for it to depend on EXPERIMENTAL. Also minor changes to the menu organization so that the Netlink options appear the same was as do other network options. 2019-11-07 14:10:35 -06:00
Matouš Pokorný
4d59d6cbcc drivers/mtd/mtd_progmem.c: Small typo fix. 2019-11-07 07:46:22 -06:00
Han Raaijmakers
d86a9c6374 boards/arm/s32k1xx/s32k146evb/scripts/s32k146.cfg and boards/arm/s32k1xx/s32k146evb/README.txt: Added configuration script and instructions for using Thread-Aware OpenOCD for the S32K146 with Eclipse. 2019-11-07 07:38:58 -06:00
ligd
6710ba47d8 drivers/serial/serial_dma.c: Still need reset xmit buffer when meet TCOFLUSH. This is an amendment to 8fb19a4359. 2019-11-07 06:40:21 -06:00
Nathan Hartman
33898ef551 arch/arm/include/tiva/tm4c_irq.h: Fix wrong IRQ vector number. 2019-11-06 20:43:51 -06:00
Nathan Hartman
3869cfc41d arch/arm/src/tiva/common/tiva_flash.c: Improve tiva_write() (but needs more work!) 
arch/arm/src/tiva/common/tiva_flash.c:  Fix several mistakes in
tiva_write() but note that this function needs more work. (1) Fix wrong
use of && when & was intended. (2) Add compile- time warning directive
because according to this function's interface, it is supposed to
support unaligned writes and/or writes of arbitrary numbers of bytes to
FLASH. However, this function does NOT support that at this time. This
needs to be fixed. (3) Fix wrong preprocessor conditional. Was written
to use the 32-word write buffer only for TM4C1294NCPDT. This buffer is
available on all TM4C123 and TM4C129 parts. Now conditioned upon
CONFIG_ARCH_CHIP_TM4C123 or CONFIG_ARCH_CHIP_TM4C129. (4) Add comments
to document the intent of the above preprocessor logic.
 2019-11-06 20:35:35 -06:00
Nathan Hartman
71ce894cab arch/arm/src/tiva, arch/arm/include: Add support for Tiva TM4C129ENCPDT. 2019-11-06 16:20:40 -06:00
Gregory Nutt
79a2890ed5 arch/arm/src/stm32h7/stm32_allocateheap.c: Clean up some comments mangled in the last PR. 2019-11-06 13:24:33 -06:00
David Sidrane
1168e4ecea Merged in david_s5/nuttx/master_alloc (pull request #1068) 
stm32h7:allocateheap SRAM and SRAM1 are not continuous

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2019-11-06 19:20:37 +00:00
Gregory Nutt
c8831ac3c8 drivers/serial/serial_io.c and serial_dma.c: Fix some long lines. 2019-11-06 07:10:24 -06:00
ligd
8fb19a4359 drivers/serial/serial_dma.c: Avoid uart_xmitchars_done() move the tail bigger then head. If ioctl(TCOFLUSH) occurs between uart_xmitchars_dma() and uart_xmitchars_done(), TCOFLUSH will reset xmit buffer, then uart_xmitchars_done() will move the 'tail' ahead of 'head', then sends lots of wrong data. 2019-11-06 07:07:30 -06:00
Gregory Nutt
3e8366775f Run tools/nxstyle against some files. 2019-11-05 19:39:36 -06:00
David S. Alessio
87329ebf67 boards/arm/stm32/olimex-stm32-e407/scripts/: Individual linker scripts for F407ZE and F407ZG chips. 2019-11-05 18:35:23 -06:00
Xiang Xiao
3a32937b9b drivers/wireless/ieee80211/bcm43xxx: Move drivers/wireless/ieee80211/ to drivers/wireless/ieee80211/bcm43xxx/ 
since the directory only contains only BCM43362 and BCM43438 related code.
 2019-11-05 15:38:01 -06:00
Heiko Demlang
7b6bd5cc0f boards/arm/stm32h7/nucleo-h743zi/src: Added gpio-device-driver for userspace apps. 2019-11-05 14:14:55 -06:00
David Alessio
1c3d6ea24b sched/sched/sched_waitpid.c: Fix null pointer derefence on race without DEBUG_ASSERT. 2019-11-05 08:59:01 -06:00
Gregory Nutt
e2976c5b4e boards/../stm32_appinit.c: Handle cases where 'OK' is not defined. 2019-11-05 07:47:12 -06:00
Juha Niskanen
a085a0a70b fs/smartfs/smartfs_smart.c: Honor O_APPEND on writes. Also document pwrite() bug/limitation. 2019-11-05 07:32:23 -06:00
Juha Niskanen
3268eb882e fs/smartfs/smartfs_smart.c: Fix O_CREAT without O_TRUNC truncating existing file. Also nothing in POSIX says that O_APPEND should prevent O_TRUNC. 2019-11-05 07:28:24 -06:00
David Alessio
0154126c01 boards/Kconfig: Newer Olimex E407 boards are populated with STM32407ZE chips. 2019-11-05 07:12:07 -06:00
Gregory Nutt
e207f020d7 boards/boardctl.c: pm_stay() was used were pm_staycount() was intended. The caused an error: void value not ignored as it ought to be. 2019-11-04 18:28:01 -06:00
Gregory Nutt
86846f8bb3 include/sys/boardctl.h: pm.h is in include/nuttx/power/pm.h, not include/nuttx/pm.h. 2019-11-04 16:59:18 -06:00
David Sidrane
f078a2496b drivers/serial/serial_io.c: Uses signal numbers, but does not include signal.h. This has not problems but missing signal definitions have been seen in certain cases. 2019-11-04 16:24:41 -06:00
Gregory Nutt
3927be2612 libs/libc/string/Make.defs: Need to include build support for files needed when CHAR_BIT != 8. 2019-11-04 16:02:50 -06:00
Gregory Nutt
dc3ae12545 boards/arm/stm32/nucleo-f4x1re/src/stm32_boot.c: Fix some erroneous conditional compilation in board_late_initialize(). 2019-11-04 14:20:15 -06:00
Gregory Nutt
7218f6431c boards/arm/stm32f0l0g0/nucleo-g070rb/src/stm32_boot.c: Fix some erroneous conditional compilation in board_late_initialize(). 2019-11-04 14:16:43 -06:00
Daniel Pereira Volpato
4c5cbdfae3 boards/arm/stm32f0l0g0/nucleo-g070rb: boards/arm/stm32f0l0g0/nucleo-g070rb: Add button driver support, Add driver support. Add GPIO example. Includes fixes to the GPIO driver support from Guillherme Amaral <gvr@certi.org.br>. 2019-11-04 14:11:36 -06:00
Gregory Nutt
38e527deeb net/netlink: Fix cosmetic issues, mostly typo fixes. 2019-11-04 14:06:07 -06:00
Dave Marples
48d1d9d84f arch/arm/src/imxrt/imxrt_serial.c: This commit improves the performance of UART serial ports on the IMXRT by enabling the RX & TX FIFOS and transmission on the holding register being empty (TDRE) rather than transmission being complete (TC). 2019-11-04 11:16:46 -06:00
Gregory Nutt
6d197e5a59 include/nuttx/audio/audio.h: Fix some typos that I introduced with my review of a recent patch. 2019-11-04 10:45:13 -06:00
Gregory Nutt
6d13705e93 net/netlink: The NETLINK_ROUTE logic needs to return the first queued response and not attempt to match up reponses with requests. That is the Linux compatible way. Also, use queue.h functions for list management and fix an error in arp_snapshot(). 2019-11-04 09:02:14 -06:00
Alin Jerpelea
7153598124 Merged in alinjerpelea/nuttx (pull request #1066) 
drivers: modem: altair: auto select SPI

The Altair hardware is connected to SPI and will not work without SPI support
The SPI_EXCHANGE is automaticaly enabled (default y) when SPI is selected.

Since SPI is mandatory it should be auto selected

Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2019-11-04 14:24:44 +00:00
Xiang Xiao
800e12fc42 arch/: Add rpmsg_serialini() call to every implementation of up_initialize() for rpmsg uart initialization. 2019-11-04 08:11:50 -06:00
Gregory Nutt
a257a5e606 Documentation/NuttShell.html: Update document to at least mention the new pmconfig command. 2019-11-04 08:01:28 -06:00
Xiang Xiao
8a59ae70ff boards/boardctl.c: Expose power manager function through boardctl interface. 2019-11-04 07:41:25 -06:00
Alin Jerpelea
516945d97e boards/arm/cxd56xx/spresense/configs/lte/defconfig: Select CONFIG_MODEM_ALTMDM. 2019-11-04 07:18:18 -06:00
Alin Jerpelea
182c55635d include/nuttx/rptun/rptun.h: openamp/open_amp.h must not be included unless CONFIG_RPTUN (and heance CONFIG_OPENAMP) are selected. 2019-11-04 07:15:06 -06:00
ligd
3480f7a0bc drivers/serial/serial.c: Only real uart will call pm_activity(). 2019-11-03 19:56:28 -06:00
Xiang Xiao
270b62bacc include/nuttx/mm/mm.h: Remove the assumption that one character equals eight bits. 2019-11-03 19:54:23 -06:00
anchao
9e3bafc7c6 audio/audio.c: Add message type to support audio trigger. 2019-11-03 19:52:18 -06:00
ligd
eb0d0c764e include/nuttx/ioexpander/gpio.h: Add guards so that file content will not compile unless CONFIG_DEV_GPIO is selected. 2019-11-03 19:46:56 -06:00
Xiang Xiao
0c50499027 drivers/addrenv.c: Move up_addrenv_ implemenation to common folder. 2019-11-03 19:45:05 -06:00
Xiang Xiao
c397692532 sched/semaphore/spinlock.c: spin_trylock handle memory barrier and instrumentation correctly. 2019-11-03 19:40:58 -06:00
Xiang Xiao
e1a89d29ee sched/semaphore/spinlock.c: Remove support for re-entrant spinlocks. They seem like a good idea, but they are never used. 2019-11-03 19:38:39 -06:00
Petro Karashchenko
e805bc0660 Various drivers: Cloned logic. On error, memory was freed, but the error was not returned. It just continued as though no error happened. 2019-11-03 19:31:49 -06:00
Gregory Nutt
7bd045130c net/netlink/: Misc bugfixes from initial testing using NSH 'arp -t' command. 2019-11-03 19:27:58 -06:00
Gregory Nutt
3439720739 Documentation/NuttShell.html: Document the new -t option for the 'arp' command. 2019-11-03 16:21:51 -06:00