functions will call esp32_txint again which leads to deadlock since
esp32_txint has already locked the spinlock.
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
This commit removes the initialization of the Wi-Fi partition
from the Wi-Fi board logic and moves it to the SPI Flash board code.
It creates 2 different partition (one for Wi-Fi and one for general
use).
It also allows these partitions to be mounted over several FSs.
The name used in Tensilica support file core-isa.h for all vendors is
`XCHAL_NUM_INTLEVELS`.
Use a new name may be confused by newer porting xtensa arch.
Change-Id: Ie108d3fdfcc02c81f0eacfca852a1cfc9eea17de
The PRO CPU and APP CPU have different peripherals for GPIO interrupts.
Each CPU needs to allocate an interrupt and attach it to its GPIO
peripheral.
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
Matrix.
This allows manipulating interrupts from both CPUs. Internal interrupts
however, still need to be disabled/enabled by each CPU.
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
They do the same thing (manipulate interrupts) keeping them separated
was making things harder.
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
Allocating and attaching interrupts were both exported outside, however
these two move hand in hand and we don't have to expose these details.
Also, the parameters passed are saved and will be used to retrieve
information about the interrupt and the attached peripheral.
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
interrupt.
That function will have a parameter to decide whether to allocate a
level sensitive interrupt or an edge sensitive interrupt.
All the drivers are also updated with this API change.
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
are do not go through the regular process where we attache the CPU
interrupt to a peripheral and update our map, also, they are fixed and a
have reserved CPU interrupt, thus hard code their values at startup.
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
At this point we are in a critical section and have all the necessary
information to disable the interrupt properly (CPU, and CPU interrupt).
Leaving it to the drivers will complicate things as converting from IRQs
to CPU interrupts could be tricky in SMP mode.
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
This map also keeps track of the CPU that attached the IRQ. This will
be used to properly disable the interrupt in the correct CPU in SMP
mode.
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
ESP32 uses a different function to start the app CPU and no other xtensa
CPU uses this __cpu1_start function.
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
Consider follow coprocessor configuration case:
\#define XCHAL_CP_NUM 1 /* number of coprocessors */
\#define XCHAL_CP_MAX 2 /* max CP ID + 1 (0 if none) */
\#define XCHAL_CP_MASK 0x02 /* bitmask of all CPs by ID */
\#define XCHAL_CP_PORT_MASK 0x00 /* bitmask of only port CPs */
\
\#define XCHAL_CP1_NAME "AudioEngineLX"
\#define XCHAL_CP1_IDENT AudioEngineLX
\#define XCHAL_CP1_SA_SIZE 208 /* size of state save area */
\#define XCHAL_CP1_SA_ALIGN 8 /* min alignment of save area */
\#define XCHAL_CP_ID_AUDIOENGINELX 1 /* coprocessor ID (0..7) */
In this case, XTENSA_CP_ALLSET is 0x1, but valid coprocessors
bitmap is 0x2, use marco XCHAL_CP_MASK instead, it is bitmap of all
vaild coprocs.
Change-Id: I63ec01e4bd0cbafc62d56636cc11bdc4a2f7857f
Many duplicate code when more chips add-in,
follow arch/arm/include/irq.h method, use chip/irq.h instead.
Change-Id: I42f516c1dda68e973939c669f627c457cd0bc65e
