1.nxsem_post wake up nxsched_smp_call;
2.stack smp_call_data_s may return;
3.nxsched_smp_call_handler access call_data->lock is not safety;
so adjust the unlock order
Signed-off-by: dulibo1 <dulibo1@xiaomi.com>
reason:
1 To improve efficiency, we mimic Linux's behavior where preemption disabling is only applicable to the current CPU and does not affect other CPUs.
2 In the future, we will implement "spinlock+sched_lock", and use it extensively. Under such circumstances, if preemption is still globally disabled, it will seriously impact the scheduling efficiency.
3 We have removed g_cpu_lockset and used irqcount in order to eliminate the dependency of schedlock on critical sections in the future, simplify the logic, and further enhance the performance of sched_lock.
4 We set lockcount to 1 in order to lock scheduling on all CPUs during startup, without the need to provide additional functions to disable scheduling on other CPUs.
5 Cpu1~n must wait for cpu0 to enter the idle state before enabling scheduling because it prevents CPUs1~n from competing with cpu0 for the memory manager mutex, which could cause the cpu0 idle task to enter a wait state and trigger an assert.
size nuttx
before:
text data bss dec hex filename
265396 51057 63646 380099 5ccc3 nuttx
after:
text data bss dec hex filename
265184 51057 63642 379883 5cbeb nuttx
size -216
Configuring NuttX and compile:
$ ./tools/configure.sh -l qemu-armv8a:nsh_smp
$ make
Running with qemu
$ qemu-system-aarch64 -cpu cortex-a53 -smp 4 -nographic \
-machine virt,virtualization=on,gic-version=3 \
-net none -chardev stdio,id=con,mux=on -serial chardev:con \
-mon chardev=con,mode=readline -kernel ./nuttx
Signed-off-by: hujun5 <hujun5@xiaomi.com>
Signed-off-by: dulibo1 <dulibo1@xiaomi.com>
1.call_data->refcount is not remote_cpus;
2.nxsched_smp_call_add enqueue the call_data;
3.maybe nxsched_smp_call_handler is just doing;
4.dequeue the call_data but call_data->refcount is not corret;
5.unpredictability case will occur;
reason:
Currently, if we need to schedule a task to another CPU, we have to completely halt the other CPU,
manipulate the scheduling linked list, and then resume the operation of that CPU. This process is both time-consuming and unnecessary.
During this process, both the current CPU and the target CPU are inevitably subjected to busyloop.
The improved strategy is to simply send a cross-core interrupt to the target CPU.
The current CPU continues to run while the target CPU responds to the interrupt, eliminating the certainty of a busyloop occurring.
Signed-off-by: hujun5 <hujun5@xiaomi.com>
reason:
1In the scenario of active waiting, context switching is inevitable, and we can eliminate redundant judgments.
code size
before
hujun5@hujun5-OptiPlex-7070:~/downloads1/vela_sim/nuttx$ size nuttx
text data bss dec hex filename
262848 49985 63893 376726 5bf96 nuttx
after
hujun5@hujun5-OptiPlex-7070:~/downloads1/vela_sim/nuttx$ size nuttx
text data bss dec hex filename
263324 49985 63893 377202 5c172 nuttx
reduce code size by -476
Configuring NuttX and compile:
$ ./tools/configure.sh -l qemu-armv8a:nsh_smp
$ make
Running with qemu
$ qemu-system-aarch64 -cpu cortex-a53 -smp 4 -nographic \
-machine virt,virtualization=on,gic-version=3 \
-net none -chardev stdio,id=con,mux=on -serial chardev:con \
-mon chardev=con,mode=readline -kernel ./nuttx
Signed-off-by: hujun5 <hujun5@xiaomi.com>
The feature depends on ARCH_USE_SEPARATED_SECTION
the different memory area has different access speed and cache
capability, so the arch can custom allocate them based on
section names to achieve performance optimization
test:
sim:elf
sim:sotest
Signed-off-by: dongjiuzhu1 <dongjiuzhu1@xiaomi.com>
This commit simplified thread ID dispatching logic by integrating it into the `nxsig_dispatch` function.
Signed-off-by: ouyangxiangzhen <ouyangxiangzhen@xiaomi.com>
There will be a large performance loss after SCHED_CRITMONITOR is enabled.
By isolating thread running time-related functions, CPU load can be run with less overhead.
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
Signed-off-by: buxiasen <buxiasen@xiaomi.com>
When statistics when sched_cpuload_critMonitor, thread switching only
calculates the current CPU's running time. Other CPU running threads
are updated for updates
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
Converted the timer overrun check from a loop-based approach to a division-based method. This change ensures a deterministic worst-case execution time (WCET), even if it might not outperform the loop in average scenarios.
Signed-off-by: ouyangxiangzhen <ouyangxiangzhen@xiaomi.com>
This patch added support for SIGEV_THREAD_ID and sigev_notify_thread_id.
Signed-off-by: ouyangxiangzhen <ouyangxiangzhen@xiaomi.com>
Signed-off-by: ligd <liguiding1@xiaomi.com>
When we do not drop notifier from g_notifier_pending, we need an
isolated dq entry for this queue, otherwise the queued work_s's dq entry
may be modified by the work queue and breaks the chain of
g_notifier_pending.
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
Return 1 to indicate the work was not cancelled.
Because it is currently being processed by work thread,
but wait for it to finish.
Signed-off-by: ligd <liguiding1@xiaomi.com>
Revert "Parallelize depend file generation"
This reverts commit d5b6ec450f.
parallel depend ddc does not significantly speed up compilation,
intermediately generated .ddc files can cause problems if compilation is interrupted unexpectedly
Signed-off-by: xuxin19 <xuxin19@xiaomi.com>
reason:
1 On different architectures, we can utilize more optimized strategies
to implement up_current_regs/up_set_current_regs.
eg. use interrupt registersor percpu registers.
code size
before
text data bss dec hex filename
262848 49985 63893 376726 5bf96 nuttx
after
text data bss dec hex filename
262844 49985 63893 376722 5bf92 nuttx
size change -4
Configuring NuttX and compile:
$ ./tools/configure.sh -l qemu-armv8a:nsh_smp
$ make
Running with qemu
$ qemu-system-aarch64 -cpu cortex-a53 -smp 4 -nographic \
-machine virt,virtualization=on,gic-version=3 \
-net none -chardev stdio,id=con,mux=on -serial chardev:con \
-mon chardev=con,mode=readline -kernel ./nuttx
Signed-off-by: hujun5 <hujun5@xiaomi.com>
Using the ts/tick conversion functions provided in clock.h
Do this caused we want speed up the time calculation, so change:
clock_time2ticks, clock_ticks2time, clock_timespec_add,
clock_timespec_compare, clock_timespec_subtract... to MACRO
Signed-off-by: ligd <liguiding1@xiaomi.com>
