Commit Graph

47381 Commits

Author SHA1 Message Date
chao an
82d67b201a net/offload: add offload support for pkt/arp
1. add offload support for pkt/arp
2. Reset the d_buf to NULL if d_iob has released

Signed-off-by: chao an <anchao@xiaomi.com>
2022-12-04 01:34:30 +08:00
okayserh
0dafa5f921 Added initial USB support for stm32f746g discovery. 2022-12-03 20:06:47 +08:00
zouboan
aad321dfa8 tools/define.bat: sync design of define.bat with define.sh to uniform usage 2022-12-03 19:22:17 +08:00
David Sidrane
da7fe760e8 s32k1xx:LPI2C Add DMA support
s32k3xx:LPI2C fix RESET so it compiles
2022-12-03 13:54:34 +08:00
chao an
34d2cde8a8 net/l2/l3/l4: add support of iob offload
1. Add new config CONFIG_NET_LL_GUARDSIZE to isolation of l2 stack,
   which will benefit l3(IP) layer for multi-MAC(l2) implementation,
   especially in some NICs such as celluler net driver.

new configuration options: CONFIG_NET_LL_GUARDSIZE

CONFIG_NET_LL_GUARDSIZE will reserved l2 buffer header size of
network buffer to isolate the L2/L3 (MAC/IP) data on network layer,
which will be beneficial to L3 network layer protocol transparent
transmission and forwarding

------------------------------------------------------------
Layout of frist iob entry:

        iob_data (aligned by CONFIG_IOB_ALIGNMENT)
            |
            |                  io_offset(CONFIG_NET_LL_GUARDSIZE)
            |                                |
            -------------------------------------------------
      iob   |            Reserved            |    io_len    |
            -------------------------------------------------

-------------------------------------------------------------
Layout of different NICs implementation:

        iob_data (aligned by CONFIG_IOB_ALIGNMENT)
            |
            |                 io_offset(CONFIG_NET_LL_GUARDSIZE)
            |                                |
            -------------------------------------------------
 Ethernet   |       Reserved    | ETH_HDRLEN |    io_len    |
            ---------------------------------|---------------
 8021Q      |   Reserved  | ETH_8021Q_HDRLEN |    io_len    |
            ---------------------------------|---------------
 ipforward  |            Reserved            |    io_len    |
            -------------------------------------------------

--------------------------------------------------------------------

2. Support iob offload to l2 driver to avoid unnecessary memory copy

Support send/receive iob vectors directly between the NICs and l3/l4
stack to avoid unnecessary memory copies, especially on hardware that
supports Scatter/gather, which can greatly improve performance.

new interface to support iob offload:

  ------------------------------------------
  |    IOB version     |     original      |
  |----------------------------------------|
  |  devif_iob_poll()  |   devif_poll()    |
  |       ...          |       ...         |
  ------------------------------------------

--------------------------------------------------------------------

1> NIC hardware support Scatter/gather transfer

TX:

                tcp_poll()/udp_poll()/pkt_poll()/...(l3|l4)
                           /              \
                          /                \
devif_poll_[l3|l4]_connections()     devif_iob_send() (nocopy:udp/icmp/...)
           /                                   \      (copy:tcp)
          /                                     \
  devif_iob_poll("NIC"_txpoll)                callback() // "NIC"_txpoll
                                                  |
                            dev->d_iob:           |
                                                ---------------         ---------------
                             io_data       iob1 |  |          |    iob3 |  |          |
                                    \           ---------------         ---------------
                                  ---------------  |       --------------- |
                             iob0 |  |          |  |  iob2 |  |          | |
                                  ---------------  |       --------------- |
                                     \             |          /           /
                                        \          |       /           /
                                   ----------------------------------------------
                    NICs io vector |    |    |    |    |    |    |    |    |    |
                                   ----------------------------------------------

RX:

  [tcp|udp|icmp|...]ipv[4|6]_data_handler()(iob_concat/append to readahead)
                    |
                    |
      [tcp|udp|icmp|...]_ipv[4|6]_in()/...
                    |
                    |
          pkt/ipv[4/6]_input()/...
                    |
                    |
     NICs io vector receive(iov_base to each iobs)

--------------------------------------------------------------------

2> CONFIG_IOB_BUFSIZE is greater than MTU:

TX:

"(CONFIG_IOB_BUFSIZE) > (MAX_NETDEV_PKTSIZE + CONFIG_NET_GUARDSIZE + CONFIG_NET_LL_GUARDSIZE)"

                tcp_poll()/udp_poll()/pkt_poll()/...(l3|l4)
                           /              \
                          /                \
devif_poll_[l3|l4]_connections()     devif_iob_send() (nocopy:udp/icmp/...)
           /                                   \      (copy:tcp)
          /                                     \
  devif_iob_poll("NIC"_txpoll)                callback() // "NIC"_txpoll
                                                  |
                                             "NIC"_send()
                          (dev->d_iob->io_data[CONFIG_NET_LL_GUARDSIZE - NET_LL_HDRLEN(dev)])

RX:

  [tcp|udp|icmp|...]ipv[4|6]_data_handler()(iob_concat/append to readahead)
                    |
                    |
      [tcp|udp|icmp|...]_ipv[4|6]_in()/...
                    |
                    |
          pkt/ipv[4/6]_input()/...
                    |
                    |
     NICs io vector receive(iov_base to io_data)

--------------------------------------------------------------------

3> Compatible with all old flat buffer NICs

TX:
                tcp_poll()/udp_poll()/pkt_poll()/...(l3|l4)
                           /              \
                          /                \
devif_poll_[l3|l4]_connections()     devif_iob_send() (nocopy:udp/icmp/...)
           /                                   \      (copy:tcp)
          /                                     \
  devif_iob_poll(devif_poll_callback())  devif_poll_callback() /* new interface, gather iobs to flat buffer */
       /                                           \
      /                                             \
 devif_poll("NIC"_txpoll)                     "NIC"_send()(dev->d_buf)

RX:

  [tcp|udp|icmp|...]ipv[4|6]_data_handler()(iob_concat/append to readahead)
                    |
                    |
      [tcp|udp|icmp|...]_ipv[4|6]_in()/...
                    |
                    |
               netdev_input()  /* new interface, Scatter/gather flat/iob buffer */
                    |
                    |
          pkt/ipv[4|6]_input()/...
                    |
                    |
    NICs io vector receive(Orignal flat buffer)

3. Iperf passthrough on NuttX simulator:

  -------------------------------------------------
  |  Protocol      | Server | Client |            |
  |-----------------------------------------------|
  |  TCP           |  813   |   834  |  Mbits/sec |
  |  TCP(Offload)  | 1720   |  1100  |  Mbits/sec |
  |  UDP           |   22   |   757  |  Mbits/sec |
  |  UDP(Offload)  |   25   |  1250  |  Mbits/sec |
  -------------------------------------------------

Signed-off-by: chao an <anchao@xiaomi.com>
2022-12-03 11:47:04 +08:00
Peter Bee
c26fd6565d drivers/video: enhance v4l2 compatibility
Add common BSD v4l2 header file
Complete ioctls according to standard v4l2 drivers

Signed-off-by: Peter Bee <bijunda1@xiaomi.com>
2022-12-03 02:48:01 +08:00
David Sidrane
ddc178122e s32k3xx:EDMA Add Error handeling 2022-12-03 02:47:42 +08:00
David Sidrane
1d84656f79 s32k3xx:EDMA Add Looping and Cleanup 2022-12-03 02:47:42 +08:00
crafcat7
8b95b7ca5b littlefs: Get and return the current error status before RMDIR execution type
In some cases, deleting a folder will return unexpected results. For example, ENOENT should be returned when deleting a non-existent folder, but the result will return ENOTDIR.
2022-12-03 02:44:49 +08:00
田昕
cb0418676f include/nuttx:add linux-like notifier
Signed-off-by: 田昕 <tianxin7@xiaomi.com>
2022-12-02 22:56:22 +08:00
David Sidrane
22390df92d s32k3xx:EDMA fix DMAMUX1 access violation 2022-12-02 22:56:07 +08:00
qiaohaijiao1
18bca596d4 sim/sim_alsa.c: add mp3 offload playback on sim
use host libmad to simulate read DSP.

Signed-off-by: qiaohaijiao1 <qiaohaijiao1@xiaomi.com>
2022-12-02 22:55:38 +08:00
qiaohaijiao1
e6ec6e1a94 sim/alsa: enable CONFIG_SIM_M32 config
Signed-off-by: qiaohaijiao1 <qiaohaijiao1@xiaomi.com>
2022-12-02 22:55:38 +08:00
Zhe Weng
025430a964 net/icmpv6: Fix icmpv6_reply function
Fix icmpv6_reply logic broken by commit 48311cc61f and 391b501639.

- 48311cc61f "Fix unaligned memory access when creating ICMP Port Unreachable messages"
  - It removed `htonl` function outside `data`, then the byte order may be wrong, so add `htons` back.
- 391b501639 "net: extract l3 header build code into new functions"
  - It mis-removed the `memmove`, and the icmpv6 has no payload copied after this commit.

Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
2022-12-02 15:26:45 +08:00
Zhe Weng
69cbcfd19f net/ipfwd: Support ICMPv6 error reply when forwarding IPv6
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
2022-12-02 15:26:45 +08:00
Zhe Weng
f416fd86bb net/ipfwd: Support ICMP error reply when forwarding IPv4
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
2022-12-02 15:26:45 +08:00
Zhe Weng
da6ab79d65 net/ipv4_input: Set IPv4 flag at the same place as ipv6_input
Set IPv4 flag before processing ipforward, otherwise the ICMP packet responded by ipforward may sometimes be regarded as IPv6.

Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
2022-12-02 15:26:45 +08:00
chao an
c1c17794f9 arm/arm: generating assemble code in ARM states by default
The following changes omit the arm version:

| commit d321080351
| Author: chao an <anchao@xiaomi.com>
| Date:   Fri Dec 2 02:52:18 2022 +0800
|
|     arm/cortex-[a|r]: generating assemble code in ARM states by default
|
|     Signed-off-by: chao an <anchao@xiaomi.com>

Signed-off-by: chao an <anchao@xiaomi.com>
2022-12-02 13:54:17 +08:00
YAMAMOTO Takashi
fc4493b7f1 esp32-devkitc/wamr_wasi_debug: enable native-lib stuff
* enable DLFCN.

* bump WAMR to a version which i happened to test.

* enable bulk-memory because it's required by recent versions of
  wasi-sdk, which i happened to use to build a test module.
  (test.wasm in the log below.)

Lightly tested with a stripped down version of WAMR native-lib example. [1]

```
nsh> mount -t littlefs /dev/esp32flash /mnt
nsh> iwasm --native-lib=/mnt/test_add.o /mnt/test.wasm
Hello World!
10 + 20 = 30
nsh> iwasm /mnt/test.wasm
[00:00:23:000 - 6]: warning: failed to link import function (env, test_add)
Hello World!
Exception: failed to call unlinked import function (env, test_add)
nsh>
```

[1] https://github.com/bytecodealliance/wasm-micro-runtime/tree/main/samples/native-lib
2022-12-02 13:47:20 +08:00
Peter Bee
87e16c3694 drivers/video: add support for yuv420p
Add calc functions for buffer size (yuv420p is 6Byte/4px)

Signed-off-by: Peter Bee <bijunda1@xiaomi.com>
2022-12-02 13:18:20 +08:00
Peter Bee
365b1f4bb8 drivers/video: add support for YUYV format
Add YUYV format which is used by most USB Cameras

Signed-off-by: Peter Bee <bijunda1@xiaomi.com>
2022-12-02 13:18:20 +08:00
wangbowen6
84fa994f51 rpmsgdev: rpmsgdegv ioctl and seek buf fix
1. rpmsgdev ioctl: should assgin back the client return value to
   cookie->result, then this return value can be returned to the
   application;
2. rpmsgdev seek: the type "off_t" may be 64bit, so modify the offset
   in "struct rpmsgdev_lseek" to int64_t too;
3. rpmsgdev_seek: the rpmsgdev_seek in client should update the
   filep->f_pos after the seek operation;

Signed-off-by: wangbowen6 <wangbowen6@xiaomi.com>
2022-12-02 12:05:53 +08:00
TimJTi
b6c148e763 Style changes for sam_adc.c and sam_tsd.c 2022-12-02 01:09:25 +01:00
chao an
77aede7c87 arm/thumb: outputs an implicit IT block to avoid build break
Fix build break on thumb2 mode:
opus/celt/arm/celt_pitch_xcorr_arm-gnu.S: Assembler messages:
opus/celt/arm/celt_pitch_xcorr_arm-gnu.S:146: Error: thumb conditional instruction should be in IT block -- `movle pc,lr'

Reference:
https://developer.arm.com/documentation/100067/0612/armclang-Command-line-Options/-mimplicit-it

In A32 code, the integrated assembler accepts all conditional instructions
without giving an error or warning. In T32 code, the integrated assembler
outputs an implicit IT block when there is a conditional instruction
without an enclosing IT block. The integrated assembler does not give an
error or warning about this.

Signed-off-by: chao an <anchao@xiaomi.com>
2022-12-01 22:14:34 +01:00
chao an
9ab97df0a5 arm/cortex-[a|r]/thumb: force assembler files to be interpreted as Thumb code
The option '-mthumb' is only valid for C source files and it is not passed to the assembler.

If 'thumb' is not considered in some assembly projects, the system will generate
'undefined instructions' when running incompatible instruction:

arm_undefinedinsn: Undefined instruction at 0x380cfc98

This assembly file should be compiled with .thumb but it doesn't:

380cfc90 <hobot_i8_i32_gemm_nn_m4_n8_neon>:
380cfc90: e92d4ff0  push  {r4, r5, r6, r7, r8, r9, sl, fp, lr}
380cfc94: ed2d8b10  vpush {d8-d15}
380cfc98: e59d4064  ldr r4, [sp, #100]  ; 0x64   <-- Undefined instruction
380cfc9c: e59d5068  ldr r5, [sp, #104]  ; 0x68
380cfca0: e59d606c  ldr r6, [sp, #108]  ; 0x6c
380cfca4: e59d7070  ldr r7, [sp, #112]  ; 0x70
380cfca8: e1a08120  lsr r8, r0, #2
380cfcac: e1a091a1  lsr r9, r1, #3
380cfcb0: e1a0a122  lsr sl, r2, #2

After enable thumb:
  .syntax unified
  .thumb
or
  -Wa,-mthumb

.Lhobot_i8_i32_gemm_nn_m4_n8_neon:
38001100: e92d 4ff0   stmdb sp!, {r4, r5, r6, r7, r8, r9, sl, fp, lr}
38001104: ed2d 8b10   vpush {d8-d15}
38001108: 9c19        ldr r4, [sp, #100]  ; 0x64
3800110a: 9d1a        ldr r5, [sp, #104]  ; 0x68
3800110c: 9e1b        ldr r6, [sp, #108]  ; 0x6c
3800110e: 9f1c        ldr r7, [sp, #112]  ; 0x70
38001110: ea4f 0890   mov.w r8, r0, lsr #2
38001114: ea4f 09d1   mov.w r9, r1, lsr #3
38001118: ea4f 0a92   mov.w sl, r2, lsr #2

This commit will enable the thumb option of the assembly file by default,
so that when compiling the assembly file, the machine code and the system will be in a consistent state.

----------------------------------------------------------------
https://gcc.gnu.org/onlinedocs/gcc-4.5.2/gcc/ARM-Options.html

GCC Manual:
-mthumb
  Generate code for the Thumb instruction set. The default is to use the 32-bit ARM
  instruction set. This option automatically enables either 16-bit Thumb-1 or mixed 16/32-bit
  Thumb-2 instructions based on the -mcpu=name and -march=name options.

  ** This option is not passed to the assembler. **
  ** If you want to force assembler files to be interpreted as Thumb code,
     either add a `.thumb' directive to the source or pass the -mthumb option
     directly to the assembler by prefixing it with -Wa. **

Signed-off-by: chao an <anchao@xiaomi.com>
2022-12-01 22:14:34 +01:00
chao an
d321080351 arm/cortex-[a|r]: generating assemble code in ARM states by default
Signed-off-by: chao an <anchao@xiaomi.com>
2022-12-01 22:14:34 +01:00
YAMAMOTO Takashi
8ee2ed0b91 littlefs: add a few Kconfig options 2022-12-01 23:34:31 +08:00
YAMAMOTO Takashi
a43af6563b esp32-devkitc:wamr_wasi_debug kconfig maintainance
* disable too verbose wamr options.

* enable CONFIG_SCHED_WAITPID. because async execution on nsh prompt
  sometimes confuses me.

* enable toywasm. it's sometimes convenient to have another interpreter.
  note: wasm3 in nuttx apps doesn't have wasi enabled.
2022-12-01 23:28:33 +08:00
Zhe Weng
9aefd6717c net/nat: Add support for ICMP Error Message
Support DEST_UNREACHABLE, TIME_EXCEEDED and PARAMETER_PROBLEM ICMP types in NAT.

Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
2022-12-01 22:45:22 +08:00
Zhe Weng
23dfdeacab net/nat: Split out ipv4_nat_in/outbound_internal
Split out ipv4_nat_in/outbound_internal which returns entry instead of error code, for later ICMP error types, does not change any current logic.

Reason: Outer packet doesn't have information of port, so we need to find entry by inner packet, and apply the entry to outer packet.

| Outer Packet: SRC = Peer IP<No Port>, DST = External IP<No Port> |
| Inner Packet: SRC = External IP:Port, DST = Peer IP:Port         |

Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
2022-12-01 22:45:22 +08:00
Zhe Weng
8b211128f1 net/nat: Support param to manipulate src or dest
This commit is for later ICMP error types processing, and does not change any current logic.

Reason for supporting both side of modification is that an inbound ICMP Error MSG may carry original packet like this:

|          IP HDR: SRC = Peer IP,       DST = External IP |
|        ICMP HDR: ERROR MSG                              |
| <Origin> IP HDR: SRC = External IP,   DST = Peer IP     |
| <Origin> L4 HDR: SRC = External Port, DST = Peer Port   |

So we need to support inbound translation (External -> Local) on SRC or DST of each header.

And so do the outbound direction.

Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
2022-12-01 22:45:22 +08:00
Peter van der Perk
90472785d3 S32K3XX QSPI No need to check TX FIFO buffer when MPU is correctly configured 2022-12-01 08:00:32 -05:00
Peter van der Perk
ec5030ebe6 S32K3XX RAM fixes MPU Dcache ECC 2022-12-01 08:00:32 -05:00
Zhe Weng
3aac6a1a3b net/devif: fix devif loopback
devif_loopback needs to be applied on l2 data, and was broken by commit below, now fix it.

| commit 8850dee746
| Author: chao an <anchao@xiaomi.com>
| Date:   Sun Nov 27 03:31:07 2022 +0800
|
|     net/devif: move preprocess of txpoll into common code
|
|     Signed-off-by: chao an <anchao@xiaomi.com>

Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
2022-12-01 19:48:23 +08:00
Masayuki Ishikawa
f7937d11a2 arch: arm64: Fix qemu_pl011_txint() in qemu_serial.c
Summary:
- I noticed that the nsh prompt can not be shown when disabling
  debug features. Actually, the prompt will be shown when a user
  input happens.
- This commit fixes this issue by adding uart_xmitchars() as
  other serial drivers do.

Impact:
- None

Testing:
- Tested with qemu-armv8a:netnsh on QEMU-7.1

Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2022-12-01 19:38:03 +08:00
Masayuki Ishikawa
3b2685409a arch: risc-v: Fix nsec overflow in riscv_mtimer_current()
Summary:
- I noticed that mtimer stops around 30min after boot.
- Finally, I found that nesc overflows in riscv_mtimer_current().
- This commit fixes this issue.

Impact:
- None

Testing:
- Tested with rv-virt:nsh on QEMU-7.1

Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2022-12-01 19:33:39 +08:00
FASTSHIFT
0ae242aa8d drivers/video/fb: add poll support
Signed-off-by: pengyiqiang <pengyiqiang@xiaomi.com>
2022-12-01 15:08:03 +08:00
dongjiuzhu1
b1b2a7cc0b timerfd_create: initial reference count to zero
nx_open in timerfd_create will increase reference count,
Therefore, the reference count starts with a value of 0.

Signed-off-by: dongjiuzhu1 <dongjiuzhu1@xiaomi.com>
2022-12-01 15:07:09 +08:00
pengyiqiang
c4535ee66a drivers/input/touchscreen_upper: add missing function code comments
Signed-off-by: pengyiqiang <pengyiqiang@xiaomi.com>
2022-12-01 10:26:11 +08:00
chao an
12b0fa9ec3 arm/sama5: fix recursive dependency
arch/arm/src/sama5/Kconfig:819:error: recursive dependency detected!
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
arch/arm/src/sama5/Kconfig:819:	choice <choice> contains symbol SAMA5_FLEXCOM0_USART
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
arch/arm/src/sama5/Kconfig:824:	symbol SAMA5_FLEXCOM0_USART is part of choice SAMA5_FLEXCOM0_USART
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
arch/arm/src/sama5/Kconfig:824:	symbol SAMA5_FLEXCOM0_USART is part of choice <choice>

Signed-off-by: chao an <anchao@xiaomi.com>
2022-12-01 09:45:09 +08:00
chao an
a0bce18192 net/ipv4: fix shadows declaration
devif/ipv4_input.c: In function ‘ipv4_in’:
devif/ipv4_input.c:305:15: warning: declaration of ‘ret’ shadows a previous local [-Wshadow]
  305 |           int ret = ipv4_forward(dev, ipv4);
      |               ^~~
devif/ipv4_input.c:151:7: note: shadowed declaration is here
  151 |   int ret = OK;
      |       ^~~

Signed-off-by: chao an <anchao@xiaomi.com>
2022-12-01 09:38:33 +08:00
TimJTi
a634da9a30 Fix SAMA5D2 ADC and TSD problems
SAMA5Dx ADC and TSD fixes

Ensures ADC and TSD work together. TSD now works on SAMA5D2 and should be OK, still, for other SAMA5D familiy members

Fix CI error

checkpatch error

Update arch/arm/src/sama5/sam_tsd.h

Squash commits to arch/arm/src/sama5/hardware/sam_adc.h

Update arch/arm/src/sama5/hardware/sam_adc.h

Update arch/arm/src/sama5/hardware/sam_adc.h

Update arch/arm/src/sama5/hardware/sam_adc.h

Update arch/arm/src/sama5/hardware/sam_adc.h

Update arch/arm/src/sama5/hardware/sam_adc.h

Update arch/arm/src/sama5/hardware/sam_adc.h

Update arch/arm/src/sama5/hardware/sam_adc.h

Squash commits to arch/arm/src/sama5/sam_tsd.c

Update arch/arm/src/sama5/sam_tsd.c

Update arch/arm/src/sama5/sam_tsd.c

Update arch/arm/src/sama5/sam_tsd.c

Update sam_tsd.c

Fixes after feedback from PR and additional testing

Update sam_tc.c

checkpatch.sh error was missed when fixing someone else's error...

feedback corrections missed

Co-Authored-By: Xiang Xiao <xiaoxiang781216@gmail.com>
Co-Authored-By: Petro Karashchenko <petro.karashchenko@gmail.com>

squashed everything after 248072e02C
2022-12-01 01:51:12 +08:00
zouboan
498bc98b1b tools/Win.mk:Fix an pass1dep error when USERDEPDIRS is empty in Windows native build 2022-12-01 01:47:46 +08:00
zouboan
f115a97bdc tools/Config:Fix too long input line error call ARCHIVE when use too many libc in Windows native build
tools/Config:Fix too long input line error call ARCHIVE when use too many libc in Windows native build
2022-12-01 01:47:46 +08:00
zouboan
20c69294db tools/Win.mk:Fix an issue in mkdir -p in Windows native build 2022-12-01 01:47:46 +08:00
zouboan
744df68b10 tools/Win.mk:Fix some error in clean_context in Windows native build 2022-12-01 01:47:46 +08:00
zouboan
eaea38e0f2 libc and mm/Makefile:Fix an error caused by backslash in Windows native build
libc and mm/Makefile:Fix an error caused by backslash in Windows native build
2022-12-01 01:47:46 +08:00
zouboan
e2c2cc16ee tools/Config:Fix some error call DELFILE/DELDIR/CATFILE/CLEAN in Windows native build
tools/Config:Fix some error call DELFILE/DELDIR/CATFILE  in Windows native build
2022-12-01 01:47:46 +08:00
zouboan
fd9838f41f tools/mkdeps:Fix an error caused by do_shquote in Windows native build
tools/mkdeps:Fix an error caused by do_shquote in Windows native build

tools/mkdeps:Fix an error caused by do_shquote in Windows native build
2022-12-01 01:47:46 +08:00
TimJTi
57a21fbe1a Fixes for SAMA5D2 Flexcom USART
squashed everything after 8f8b8f5e05

Update Kconfig

Update Kconfig
2022-11-30 23:14:17 +08:00