Commit Graph

48648 Commits

Author SHA1 Message Date
Xiang Xiao
ee77243247 boards/sim/adb: Change telnetd port from 23 to 2323
to avoid the conflict with host telnetd server

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2023-02-22 16:37:19 +08:00
Michal Lenc
db6919648b samv7: add support for complementary PWM output
SAMv7 PWM driver supports complementary PWM output if both pins (H and L)
are defined and configured. This commit adds a configuration option to
configure the complementary L pin.

The pin definition has to be provided by board level support.

Signed-off-by: Michal Lenc <michallenc@seznam.cz>
2023-02-22 02:22:10 +08:00
Karel Kočí
60bd4ac13d samv7: fix printf warnings in QSPI 2023-02-22 01:42:49 +08:00
Zhe Weng
31b65844a2 usrsock: Do not return error when conn not found for an event
There might be some cases that we receive an event after socket is closed because of out-of-ordered rpmsg, since it may not cause problem, we may omit the error.
Also change log level to err when returning negated errno, because if we return negated errno, we'll directly trigger RPMSG_ASSERT outside, so we need at least an error message to indicate the reason.

Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
2023-02-22 01:42:14 +08:00
Zhe Weng
9d53de374c usrsock: Add DebugAssert for poll setup result
We never check its result and assume it will success, so an assert should be better than retval.

Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
2023-02-22 01:42:14 +08:00
Ville Juven
be0cb4cbe3 signal/sig_dispatch: Fix case where signal action is sent twice
As far as I can interpret how signal delivery should work when the signal
is blocked, it should still be sent to the pending queue even if the signal
is masked. When the sigmask changes it will be delivered.

The original implementation did not add the pending signal action, if
stcb->task_state == TSTATE_WAIT_SIG is true.

An attempt to patch this was made in #8563 but it is insufficient as it
creates an issue when the task is not waiting for a signal, but is in
syscall, in this case the signal is incorrectly queued twice.
2023-02-22 01:29:06 +08:00
Masayuki Ishikawa
5ef93ca814 boards: imxrt1060-evk: Add netnsh_dcache_wb configuration
Summary:
- This commit adds netnsh_dcache_wb configuration which enables
  d-cache write-back mode with networking.

Impact:
- None

Testing:
- Tested with iperf, telnet and ping on imxrt1060-evk board
- iperf -s 94Mbps, iperf -c 93Mbps

Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2023-02-22 01:27:54 +08:00
Masayuki Ishikawa
69e6e17407 arch: imxrt: Enable IMXRT_ENET_ENHANCEDBD if !ARMV7M_DCACHE_WRITETHROUGH
Summary:
- I noticed that there are two kinds of descriptors for imxrt_enet.c
- The first one is the legacy descriptor and its size is 8bytes.
- The second one is the enhanced descriptor and its size is 32bytes.
- In both cases, we can not use a descriptor chain like stm32.
- Considering cache line alignment, the second one is perfect because
  one descriptor fits the Cortex-M7 cache line which would fix networking
  stability issues in d-cache write-back mode.

Impact:
- imxrt ethernet in d-cache write-back mode

Testing:
- Tested with ixmrt1060-evk:netnsh_dcache_wb (will be added later)

Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2023-02-22 01:27:54 +08:00
Masayuki Ishikawa
3a4542f3c4 arch: imxrt: Fix CONFIG_IMXRT_ENET_ENHANCEDBD
Summary:
- I noticed that CONFIG_IMXRT_ENET_ENHANCEDBD is not correctly
  used though it is defined in Kconfig.
- This commit fixes this issue.

Impact:
- None

Testing:
- Tested with imxrt1060-evk:netnsh_dcache_wb (will be added later)

Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2023-02-22 01:27:54 +08:00
lilei19
e6e2017d3c fix a bug of strtof 2023-02-22 01:20:21 +08:00
Ville Juven
f8d3032732 libc/lib_assert.c: Remove the re-definition of abort()
This should now be irrelevant, as abort() is forwarded to _exit() instead.
2023-02-22 01:10:39 +08:00
Ville Juven
07039b8a36 lib_abort.c: Change call to userspace exit() into syscall _exit()
The POSIX standard dictates that during abnormal termination the functions
registered by atexit() are _not_ called, also flushing the streams is
optional. So in this case, it is perfectly legal / better to call the
kernel system call _exit() instead.

This fixes regression issues caused by removal exit() from the kernel.
2023-02-22 01:10:39 +08:00
chao an
5fac313df7 libs/libxx: Fix typo in shell expressions
Signed-off-by: chao an <anchao@xiaomi.com>
2023-02-22 01:05:46 +08:00
simbit18
7cfeccee92 Doc organization.rst
update tip incorrect permalink
2023-02-22 01:05:30 +08:00
chao an
1d41182755 libs/libxx: check GCC version before set special flags
Signed-off-by: chao an <anchao@xiaomi.com>
2023-02-21 15:33:18 +08:00
chao an
e28958fe5c fs/mount: fix compiler warning found out by GCC-12.2
mount/fs_foreachmountpoint.c: In function 'mountpoint_filter':
mount/fs_foreachmountpoint.c:99:38: warning: 'sprintf' may write a terminating nul past the end of the destination [-Wformat-overflow=]
   99 |       sprintf(&dirpath[pathlen], "/%s", node->i_name);
      |                                      ^
In function 'mountpoint_filter',
    inlined from 'mountpoint_filter' at mount/fs_foreachmountpoint.c:64:12:
mount/fs_foreachmountpoint.c:99:7: note: 'sprintf' output between 2 and 257 bytes into a destination of size 256
   99 |       sprintf(&dirpath[pathlen], "/%s", node->i_name);
      |       ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Signed-off-by: chao an <anchao@xiaomi.com>
2023-02-21 09:28:57 +08:00
chao an
60a0c2ed87 tools/ci: skip -Warray-bounds check due to bug of GCC-12.2
Wrong warning array subscript [0] is outside array bounds:

https://gcc.gnu.org/bugzilla/show_bug.cgi?id=105523

Signed-off-by: chao an <anchao@xiaomi.com>
2023-02-21 09:28:57 +08:00
chao an
fcefd16586 net/devif: fix null pointer reference found out by coverity
Signed-off-by: chao an <anchao@xiaomi.com>
2023-02-21 00:44:07 +08:00
chao an
b8ef55d201 Revert "tools/ci: Update GNU Arm Embedded Toolchain to Version 12.2-2022.12.22"
This reverts commit 809252e3fd.

Wrong warning array subscript [0] is outside array bounds:

|  chip/lpc43_usb0dev.c: In function 'lpc43_getframe':
|  arch/arm/src/common/arm_internal.h:134:25: warning: array subscript 0 is outside array bounds of 'volatile uint32_t[0]' {aka 'volatile long unsigned int[]'} [-Warray-bounds]
|    134 | #define getreg32(a)    (*(volatile uint32_t *)(a))
|        |                        ~^~~~~~~~~~~~~~~~~~~~~~~~~~
|  chip/lpc43_usb0dev.c:347:33: note: in expansion of macro 'getreg32'
|    347 | # define lpc43_getreg(addr)     getreg32(addr)
|        |                                 ^~~~~~~~
|  chip/lpc43_usb0dev.c:2605:15: note: in expansion of macro 'lpc43_getreg'
|   2605 |   return (int)lpc43_getreg(LPC43_USBDEV_FRINDEX_OFFSET);
|        |

https://gcc.gnu.org/bugzilla/show_bug.cgi?id=105523

Signed-off-by: chao an <anchao@xiaomi.com>
2023-02-20 20:05:13 +08:00
Xiang Xiao
8ef0c406bb Fix note/note_driver.c:170:3: warning: excess elements in array initializer
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2023-02-20 19:27:32 +08:00
Xiang Xiao
a841be9b9c drivers/note: Remove the warning of preemption and critical sections
since both aren't suitable after:
commit 98ab55ef68
Author: Xiang Xiao <xiaoxiang@xiaomi.com>
Date:   Fri Dec 30 12:02:47 2022 +0800

    drivers/note: Replace the scritical section with spin_xxx_wo_note

    to avoid to generate the unexpected schedule information

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2023-02-20 19:27:32 +08:00
chao an
e29d275ef8 libs/libcxx: Workaround -Wmaybe-uninitialized warning with "GCC 12.2"
Signed-off-by: chao an <anchao@xiaomi.com>
2023-02-20 19:26:55 +08:00
chao an
809252e3fd tools/ci: Update GNU Arm Embedded Toolchain to Version 12.2-2022.12.22
x86_64 Linux hosted cross toolchains
AArch32 bare-metal target (arm-none-eabi)

arm-gnu-toolchain-12.2.rel1-x86_64-arm-none-eabi.tar.xz

Remove toolchain workaround which already fixed by ARM:
https://developer.arm.com/downloads/-/arm-gnu-toolchain-downloads
https://community.arm.com/support-forums/f/compilers-and-libraries-forum/53470/arm-gnu-toolchain-11-3-rel1-x86_64-arm-none-eabi-wrong-newlib-version-strings-error-when-stdlib-h-is-included

Signed-off-by: chao an <anchao@xiaomi.com>
2023-02-20 16:20:39 +08:00
chao an
ee1e1108a7 drivers/note: fix build break by note rename change
Regression by:

| commit ee24396d77
| Author: Xiang Xiao <xiaoxiang@xiaomi.com>
| Date:   Tue Feb 14 01:11:48 2023 +0800
|
|     drivers/note: Change DRIVER_NOTExxx to DRIVERS_NOTExxx
|
|     follow other driver config style
|
|     Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>

Signed-off-by: chao an <anchao@xiaomi.com>
2023-02-20 16:19:57 +08:00
chao an
73214965b8 Documentation/kconfiglib: update document to support kconfiglib
Signed-off-by: chao an <anchao@xiaomi.com>
2023-02-20 14:35:06 +08:00
Xiang Xiao
ee24396d77 drivers/note: Change DRIVER_NOTExxx to DRIVERS_NOTExxx
follow other driver config style

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2023-02-20 14:30:59 +08:00
Xiang Xiao
eafc80c055 drivers/note: Remove the dependence of noteram driver
since after the below commit, noteram driver can work even when
the instrumentation of csection, spinlock and smp is enabled

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2023-02-20 14:30:59 +08:00
Xiang Xiao
6b14ad9337 driver/note: Restore SCHED_INSTRUMENTATION config to sched/Konfig
since the chip/board vendor could disable dirvers/note and
provide the implementation of sched_note_xxx by self

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2023-02-20 14:30:59 +08:00
chao an
f0825c2402 tools/unix: use anonymous pipes to avoid menuconfig break
Signed-off-by: chao an <anchao@xiaomi.com>
2023-02-20 13:31:02 +08:00
Fotis Panagiotopoulos
b6eb3c828c Removed obsolete option NET_ALLOC_CONNS. 2023-02-20 09:06:46 +08:00
Fotis Panagiotopoulos
b5b7d24ba1 Improvements in CAN connections allocation. 2023-02-20 09:06:46 +08:00
Fotis Panagiotopoulos
9b4d784307 Improvements in sockets allocation. 2023-02-20 09:06:46 +08:00
Fotis Panagiotopoulos
cf15d6b63a Improvements in Netlink connections allocation. 2023-02-20 09:06:46 +08:00
Fotis Panagiotopoulos
74bb921a19 Improvements in packet connections allocation. 2023-02-20 09:06:46 +08:00
Fotis Panagiotopoulos
22a82b3f51 Improvements in IEEE 802.15.4 connections allocation. 2023-02-20 09:06:46 +08:00
Fotis Panagiotopoulos
c5cc70a8b1 Improvements in Bluetooth connections allocation. 2023-02-20 09:06:46 +08:00
Fotis Panagiotopoulos
90a93a7474 Improvements in ICMPv6 connections allocation. 2023-02-20 09:06:46 +08:00
Fotis Panagiotopoulos
1c07a3a696 Improvements in ICMP connections allocation. 2023-02-20 09:06:46 +08:00
Fotis Panagiotopoulos
f207072121 Improvements in usrsock connections allocation. 2023-02-20 09:06:46 +08:00
Fotis Panagiotopoulos
7f3591b9cc Improvements in UDP connections allocation. 2023-02-20 09:06:46 +08:00
Fotis Panagiotopoulos
8f9dfe0be1 Improvements in TCP connections allocation. 2023-02-20 09:06:46 +08:00
Xiang Xiao
7d3a9b1cbc Revert "STM32 Nucleo: warning: #warning "Default Flash Configuration Used""
This reverts commit 62c15c03d3.

Fix warning: the choice symbol STM32_FLASH_CONFIG_G (defined at arch/arm/src/stm32/Kconfig:1275) is selected by the following symbols, but select/imply has no effect on choice symbols
 - ARCH_CHIP_STM32F412ZG (defined at arch/arm/src/stm32/Kconfig:1014)
2023-02-20 00:02:36 +02:00
Xiang Xiao
fa3e0faffc fs: Map FD_SETSIZE to OPEN_MAX instead hardcoding 256
and change the default value of LIBC_OPEN_MAX to 256.
Here has more discussion:
https://www.mail-archive.com/dev@nuttx.apache.org/msg09095.html

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2023-02-19 19:17:20 +02:00
Oreh
9902f39d92 Add MTD loop driver (use filemtd) 2023-02-19 19:46:48 +08:00
Tomasz 'CeDeROM' CEDRO
833f7a5a3e Updated python scripts interpreter invocation in tools/.
* Using call to portable `#!/usr/bin/env python3` syntax.
* Updated python interpreter call in `tools/ci/testrun` (please verify).

Signed-off-by: Tomasz 'CeDeROM' CEDRO <tomek@cedro.info>
2023-02-19 14:15:27 +08:00
Karel Kočí
74790c8033 boards/samv7/hsmci: add option to invert card detection pin
The original code hard-coded card detection to the low when card is
inserted and high when not. This might not be true on every board
because it depends on the slot and wiring used. The second reason is
because it is also possible to detect card with D3 pin pull-up when the
slot does not provide dedicated card detection switch.

This introduces new argument to the sam_hsmci_initialize to allow
invert of card detection pin. It also applies this invert to existing
boards as that was the state up to this point.
2023-02-19 10:36:04 +08:00
Michal Lenc
333707e101 pwm: add PWM overwrite under CONFIG_PWM_OVERWRITE option
Generic drivers shoud not use architecture related config options like
CONFIG_SAMV7_PWM. This commit adds PWM pin overwrite under generic
configuration option CONFIG_PWM_OVERWRITE.

Now the overwrite can be used on other architectures as well or can be
completely disabled for SAMv7.

Signed-off-by: Michal Lenc <michallenc@seznam.cz>
2023-02-19 00:16:41 +08:00
dirksavage88
02fc698e75 Add UART4 & UART5 to high density stm32f103 chips
Signed-off-by: dirksavage88 <dirksavage88@gmail.com>
2023-02-18 13:32:52 +08:00
crafcat7
ad3def0e15 sys/resource.h:Added ru_maxrss type 2023-02-18 06:59:16 +02:00
Fotis Panagiotopoulos
9bfa9a0b49 stm32_eth: Enabled store-end-forward. 2023-02-18 11:08:46 +08:00