Richard Tucker
929556d750
arch/arm/src/sam34/sam_hsmci: DMA also present on SAM3X chips
2022-04-15 02:22:01 +08:00
Richard Tucker
be0bcac91b
arch/arm/src/sam34/sam_hsmci.c: DMA setup before write is required
2022-04-15 02:22:01 +08:00
Richard Tucker
bc7f4b2375
arch/arm/src/sam34/sam_hsmci.c: delay required after sending command
2022-04-15 02:22:01 +08:00
chao.an
dc961baaea
arm/armv7-[a|r]: move fpu save/restore to assembly handler
...
Save/Restore FPU registers in C environment is dangerous practive,
which cannot guarantee the compiler won't generate the assembly code
with float point registers, especially in interrupt handling
Signed-off-by: chao.an <anchao@xiaomi.com>
2022-04-14 22:33:10 +08:00
Xiang Xiao
a94b7b9cca
arm/rtl8720c: Remove up_getsp which is already implemented in arch/arm/arch.h
...
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-04-14 16:35:52 +03:00
chao.an
b3d47e246f
arch/stack_color: correct the stack top of running task
...
This PR to ensure the stack pointer is locate to the stack top
Signed-off-by: chao.an <anchao@xiaomi.com>
2022-04-14 16:48:19 +08:00
chao.an
0c79ad9d8d
arch/[arm|sparc]: replace INT32_ALIGN_* to STACK_ALIGN_*
...
Signed-off-by: chao.an <anchao@xiaomi.com>
2022-04-14 16:48:19 +08:00
Abdelatif Guettouche
6d12ee19e2
arch: Move the DUMP_ON_EXIT logic after nxtask_exit.
...
Otherwise we will try to dump the state of the current task, however the
exit handler has already started doing some cleanup and invalidated its
group. Accessing the group from dumponexit will crash.
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
2022-04-13 21:59:23 +08:00
Abdelatif Guettouche
d6c952c56f
arch: Fix compile error when enabling CONFIG_DUMP_ON_EXIT
...
"error: incompatible types when assigning to type 'struct filelist *' from type 'struct filelist'
filelist = tcb->group->tg_filelist;"
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
2022-04-13 21:59:23 +08:00
chao.an
0d7ea348d5
arm/armv8-m: indicating no low-overhead-loop predication by default
...
Fix usage fault on clang version 13.0.0 (-Ofast):
------------------------------------------------------------------
| arm_hardfault: Hard Fault escalation:
| arm_usagefault: PANIC!!! Usage Fault:
| arm_usagefault: IRQ: 3 regs: 0x3c58c510
| arm_usagefault: BASEPRI: 00000080 PRIMASK: 00000000 IPSR: 00000003 CONTROL: 00000004
| arm_usagefault: CFSR: 00020000 HFSR: 40000000 DFSR: 00000000 BFAR: 01608050 AFSR: 00000000
| arm_usagefault: Usage Fault Reason:
| arm_usagefault: Invalid state
| up_assert: Assertion failed at file:armv8-m/arm_usagefault.c line: 113 task: lpwork
| backtrace:
| [ 2] [<0x2c58124a>] up_backtrace+0xa/0x2e2
| [ 2] [<0x2c56f7cc>] sched_dumpstack+0x28/0x66
| [ 2] [<0x2c580cd0>] up_assert+0x62/0x254
| [ 2] [<0x2c56ab8a>] _assert+0/0xa
| [ 2] [<0x2c55575a>] nxsched_add_prioritized+0x38/0xa2
| [ 2] [<0x2c555894>] nxsched_add_blocked+0x2e/0x44
| [ 2] [<0x2c580748>] up_block_task+0x2a/0x96
| [ 2] [<0x2c5569ea>] nxsem_wait+0x64/0xb4
| [ 2] [<0x2c556a40>] nxsem_wait_uninterruptible+0x6/0x10
| [ 2] [<0x2c559b9a>] work_thread+0x1c/0x48
-------------------------------------------------------------------
usage fault on 0x2c55575a:
------------------------------------
|2c555722 <nxsched_add_prioritized>:
|; {
|2c555722: 80 b5 push {r7, lr}
|...
|2c55575a: 2f f0 17 c0 le 0x2c555732 <nxsched_add_prioritized+0x10> @ imm = #-44
|...
------------------------------------
Arm v8-M Architecture Reference Manual:
C2.4.103 LE, LETP
B3.28 Low overhead loops:
An INVSTATE UsageFault is raised if a LE instruction is executed and FPSCR.LTPSIZE does not read as four.
When a new floating-point context is created and FPCCR.ASPEN is set to zero it is the responsibility of software
to correctly initialize FPSCR.LTPSIZE.
Signed-off-by: chao.an <anchao@xiaomi.com>
2022-04-13 09:39:22 +08:00
chao.an
ff210e1c2d
arch/stack_color: correct the end address of stack color
...
The different optimization of compilers will cause ambiguity in
obtaining sp through up_getsp() in arm_stack_color(), if compile
with clang and enable the optimization flag (-Ofast), up_getsp()
call will be earlier than push {r0-r9,lr}, the end address of color
stack will overlap with saved registers.
Compile line:
clang --target=arm-none-eabi -c "-Ofast" -fno-builtin -march=armv8.1-m.main+mve.fp+fp.dp \
-mtune=cortex-m55 -mthumb -mfpu=fpv5-d16 -mfloat-abi=hard -D__NuttX__ -common/arm_checkstack.c -o arm_checkstack.o
Assembler code:
llvm-objdump -aS arm_checkstack.o
------------------------------------
|00000000 <arm_stack_color>:
|; start = INT32_ALIGN_UP((uintptr_t)stackbase);
| 0: c2 1c adds r2, r0, #3
| 2: 22 f0 03 02 bic r2, r2, #3
|; end = nbytes ? INT32_ALIGN_DOWN((uintptr_t)stackbase + nbytes) :
| 6: 19 b1 cbz r1, 0x10 <arm_stack_color+0x10> @ imm = #6
| 8: 08 44 add r0, r1
| a: 20 f0 03 00 bic r0, r0, #3
| e: 00 e0 b 0x12 <arm_stack_color+0x12> @ imm = #0
|; __asm__
| 10: 68 46 mov r0, sp <--- fetch the sp before push {r7 lr}
| 12: 80 b5 push {r7, lr} <--- sp changed
|; nwords = (end - start) >> 2;
| 14: 80 1a subs r0, r0, r2
| 16: 80 08 lsrs r0, r0, #2
|; }
| 18: 08 bf it eq
| 1a: 80 bd popeq {r7, pc}
| 1c: 4b f6 ef 63 movw r3, #48879
| 20: cd f6 ad 63 movt r3, #57005
| 24: a0 ee 10 3b vdup.32 q0, r3
|; while (nwords-- > 0)
| 28: 20 f0 01 e0 dlstp.32 lr, r0
|; *ptr++ = STACK_COLOR; <--- overwrite
| 2c: a2 ec 04 1f vstrw.32 q0, [r2], #16
| 30: 1f f0 05 c0 letp lr, 0x2c <arm_stack_color+0x2c> @ imm = #-8
|; }
| 34: 80 bd pop {r7, pc}
------------------------------------
Signed-off-by: chao.an <anchao@xiaomi.com>
2022-04-13 09:37:54 +08:00
Xiang Xiao
df5a8a53ae
arch/arm: Move FPU initialization to common place
...
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-04-12 23:35:06 +03:00
SPRESENSE
39f7c4aea0
arch: cxd56xx: Fix critical section in scu driver
...
Add critical section to scu one-shot sequencer.
2022-04-12 07:55:00 +09:00
SPRESENSE
e725829547
cxd56xx/cxd56_emmc.c: Fix compile warning
...
Add necessary include header named debug.h for using ferr and
finfo.
2022-04-12 07:55:00 +09:00
SPRESENSE
5be940080b
arch: cxd56xx: update loader and gnssfw version
...
Update loader and gnssfw to version 2.2.20585
2022-04-12 07:55:00 +09:00
Xiang Xiao
c235c0fa43
boards/lx_cpu: Enable up_perf API
...
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-04-08 21:02:13 -03:00
Xiang Xiao
1f7b49d700
boards/nucleo-h743zi2: Enable up_perf API
...
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-04-08 21:02:13 -03:00
chao.an
8d66dbc068
arm/armv[7|8]-m: skip the fpu save/restore if stack frame is integer-only
...
Signed-off-by: chao.an <anchao@xiaomi.com>
2022-04-08 14:28:41 +09:00
Jiuzhu Dong
d87cf8d4ca
fs/poll: change format for type pollevent_t
...
Signed-off-by: Jiuzhu Dong <dongjiuzhu1@xiaomi.com>
2022-04-07 12:14:06 +08:00
zhuyanlin
6a761ff087
arch:tcbinfo: update tcbinfo as xcpcontext update
...
Signed-off-by: zhuyanlin <zhuyanlin1@xiaomi.com>
2022-04-05 13:33:00 +02:00
Petro Karashchenko
d08fbca679
nuttx: unify FAR attribute usage across the code
...
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
2022-04-04 21:32:58 +08:00
Michael Jung
e3926ecb16
stm32u5: stm32_stdclockconfig fixes
...
Fix stm32_stdclockconfig for stm32u585xx to the extend that the
B-U585I-IOT02A board's clock tree can be configured. This board uses
the MSIS as PLL1's input clock and the LSE to autotrim the MSIS.
2022-04-03 23:20:03 +03:00
wangbowen6
bcb2530b18
arm/chip: add backtrace support for all chips that support thumb instruction set.
...
Signed-off-by: wangbowen6 <wangbowen6@xiaomi.com>
2022-04-03 00:22:57 +08:00
raiden00pl
b487101b87
stm32: add support for up_perf
2022-04-02 10:34:35 -03:00
Gustavo Henrique Nihei
e1f28c19c2
arch/arm: Make CXX exception and RTTI depend on Kconfig options
...
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
2022-03-30 11:19:29 +08:00
chao.an
a98a599cb9
arm/cortex-[a|r]: IRQ Switch return should with shadow SPSR
...
The SPSR is used to store the current value of the CPSR when an exception
is taken so that it can be restored after handling the exception.
Each exception handling mode can access its own SPSR.
User mode and System mode do not have an SPSR because they are not
exception handling modes.
Signed-off-by: chao.an <anchao@xiaomi.com>
2022-03-30 08:12:26 +09:00
ligd
0f02791ae6
armv8-m: add wake_func arm_should_generate_nonsecure_busfault
...
Signed-off-by: ligd <liguiding1@xiaomi.com>
2022-03-28 22:52:28 +08:00
ligd
60fc933261
armv8-m: make the securefault handled by non-securefult
...
tee is secure cpu and ap is non-secure cpu.
The crash PC can get by IP (R12).
[ EMERG] [tee] arm_hardfault: Hard Fault escalation:
[ EMERG] [tee] arm_securefault: PANIC!!! Secure Fault:
[ EMERG] [tee] arm_securefault: IRQ: 3 regs: 0x2400ff00
[ EMERG] [tee] arm_securefault: BASEPRI: 000000e0 PRIMASK: 00000000 IPSR: 00000003 CONTROL: 0000000c
[ EMERG] [tee] arm_securefault: CFSR: 00000000 HFSR: 40000000 DFSR: 00000000
[ EMERG] [tee] arm_securefault: BFAR: 08006008 AFSR: 00000000 SFAR: 3c049ea0
[ EMERG] [tee] arm_securefault: Secure Fault Reason:
[ EMERG] [tee] arm_securefault: Attribution unit violation
[ EMERG] [tee] arm_securefault_handled_by_ns: Non-sec sp 3c475678
[ EMERG] [ap] arm_busfault: PANIC!!! Bus Fault:
[ EMERG] [ap] arm_busfault: IRQ: 5 regs: 0x3c475608
[ EMERG] [ap] arm_busfault: BASEPRI: 000000e0 PRIMASK: 00000000 IPSR: 00000005 CONTROL: 00000004
[ EMERG] [ap] arm_busfault: CFSR: 00000100 HFSR: 40000000 DFSR: 00000000 BFAR: 08006008 AFSR: 20000000
[ EMERG] [ap] arm_busfault: Bus Fault Reason:
[ EMERG] [ap] arm_busfault: Instruction bus error
[ EMERG] [ap] up_assert: Assertion failed at file:armv8-m/arm_busfault.c line: 105 task: nsh_main
[ EMERG] [ap] backtrace:
[ EMERG] [ap] [ 9] [<0x2c565246>] up_backtrace+0xa/0x168
[ EMERG] [ap] [ 9] [<0x2c550118>] sched_dumpstack+0x1c/0x60
[ EMERG] [ap] [ 9] [<0x2c5645d6>] up_assert+0x4e/0x324
[ EMERG] [ap] [ 9] [<0x2c54a98e>] _assert+0x2/0x10
[ EMERG] [ap] [ 9] [<0x2c5636d4>] arm_busfault+0xc8/0x15c
[ EMERG] [ap] [ 9] [<0x2c523070>] irq_dispatch+0x40/0x11c
[ EMERG] [ap] [ 9] [<0x2c563424>] arm_doirq+0x28/0x3c
[ EMERG] [ap] [ 9] [<0x2c55c892>] exception_common+0x4a/0xac
[ EMERG] [ap] [ 9] [<0x2c58668e>] nsh_parse_command+0x976/0x12b4
[ EMERG] [ap] [ 9] [<0x2c849cee>] write+0x52/0x74
[ EMERG] [ap] [ 9] [<0x2c58c0ac>] nsh_session+0x2c/0x1c8
[ EMERG] [ap] [ 9] [<0x2c58d82c>] nsh_consolemain+0x28/0x54
[ EMERG] [ap] [ 9] [<0x2c590352>] nsh_main+0x2a/0x48
[ EMERG] [ap] [ 9] [<0x2c5500da>] cxx_initialize+0x2a/0x4c
[ EMERG] [ap] [ 9] [<0x2c550090>] nxtask_startup+0x14/0x34
[ EMERG] [ap] [ 9] [<0x2c52966a>] nxtask_start+0x92/0xb8
[ EMERG] [ap] arm_registerdump: R0: 3c049ea0 R1: 00000004 R2: 3c448f98 R3: 00000000
[ EMERG] [ap] arm_registerdump: R4: 3c476a98 R5: 3c049ea0 R6: 00000000 FP: 3c476aac
[ EMERG] [ap] arm_registerdump: R8: 2c5873c9 SB: 3c049ea0 SL: 3c2e98fc R11: 3c284c2c
[ EMERG] [ap] arm_registerdump: IP: 2c58ba4a SP: 3c4756e0 LR: 3c049ea4 PC: 00000000
[ EMERG] [ap] arm_registerdump: xPSR: 610f0000 BASEPRI: 000000e0 CONTROL: 00000004
[ EMERG] [ap] arm_registerdump: EXC_RETURN: ffffffa8
[ EMERG] [ap] arm_dump_stack: IRQ Stack:
[ EMERG] [ap] arm_dump_stack: sp: 3c41c900
Signed-off-by: ligd <liguiding1@xiaomi.com>
2022-03-28 22:52:28 +08:00
Huang Qi
ad1098d413
arch/armv7-a: Fix a typo in Toolchain.defs
...
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
2022-03-28 12:42:43 +03:00
lishaoen
aa0c9fd788
nuttx: Add new config ARM_HAVE_MVE for MVE instruction
...
Signed-off-by: lishaoen <lishaoen@xiaomi.com>
2022-03-28 08:51:24 +03:00
Xiang Xiao
8c8c60f70a
arch: Add -fsanitize=kernel-address to ARCHCPUFLAGS if CONFIG_MM_KASAN=y
...
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-03-27 23:01:47 +03:00
ligd
e87d262c7f
arch/Toolchain.defs: add wildcard for EXTRA_LIBS
...
VELAPLATFO-1491
Signed-off-by: ligd <liguiding1@xiaomi.com>
2022-03-27 22:53:58 +03:00
Xiang Xiao
a2e079fdd2
arch/arm: Change arm_arch.h to arm_internal.h in arm_perf.c
...
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-03-27 22:31:43 +03:00
Anthony Merlino
baeb2e9af7
stm32h7: Addresses tickless PR review comments
2022-03-28 00:33:26 +08:00
Anthony Merlino
896435e7c9
Fixes formatting
2022-03-28 00:33:26 +08:00
Anthony Merlino
c3745c8441
Adjust up_timer_getmask to handle 16-bit timers correctly.
2022-03-28 00:33:26 +08:00
Anthony Merlino
30f6dbc613
Throw compile time error if tickless timer is set to TIM6/TIM7
2022-03-28 00:33:26 +08:00
Anthony Merlino
95199f4790
stm32h7 timer: Clean up some bit operations to make them more readable.
2022-03-28 00:33:26 +08:00
Anthony Merlino
e5c8bb9b34
stm32h7: Fix a bunch of tickless issues.
2022-03-28 00:33:26 +08:00
Anthony Merlino
2fad06008a
stm32h7: Adds tickless support.
2022-03-28 00:33:26 +08:00
ligd
f623ac0f13
armv7-m/armv8-m: move up_pref* api to common place
...
Signed-off-by: ligd <liguiding1@xiaomi.com>
Signed-off-by: chao.an <anchao@xiaomi.com>
2022-03-26 13:39:18 +02:00
Huang Qi
9cffc105c8
arch: Show assigned cpu in dump task
...
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
2022-03-23 22:18:15 +08:00
chao.an
7b73606300
arm/schedulesigaction: update the SP to signal context top
...
Signed-off-by: chao.an <anchao@xiaomi.com>
2022-03-23 19:08:37 +09:00
chao.an
a770ff2017
arm/vfork: update the SP to stack top
...
Signed-off-by: chao.an <anchao@xiaomi.com>
2022-03-23 19:08:37 +09:00
Xiang Xiao
9ae0dcd4a2
arch/arm: Remove the code copy register from xcpt to stack
...
since xcpt always point to the stack after the below change:
commit 7b9978883c
Author: chao.an <anchao@xiaomi.com>
Date: Tue Mar 1 01:06:24 2022 +0800
arch/arm: optimize context switch speed
The current context save implementation saves registers of each task
to xcp context, which is unnecessary because most of the arm registers are
already saved in the task stack, this commit replace the xcp context with
stack context to improve context switching performance and reduce the tcb
space occupation of tcb instance.
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-03-23 19:08:37 +09:00
Petro Karashchenko
68902d8732
pid_t: unify usage of special task IDs
...
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
2022-03-22 21:22:32 +08:00
Harri Luhtala
2ee12b2c5d
arch/arm/src/stm32l4: peripheral voltage monitor support for vddio2
...
Signed-off-by: Harri Luhtala <harri.luhtala@haltian.com>
2022-03-22 21:08:29 +08:00
Petro Karashchenko
757d01d915
progmem: eliminate PROGMEM_ERASESTATE configuration option
...
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
2022-03-22 10:01:41 -03:00
smartether
7fbadb5c16
fixed mpu9250 not work on i2c bus issue.
...
1,set rp2040 FIFO_MAX_SIZE to 16.ref: pico sdk ->
static inline size_t i2c_get_write_available(i2c_inst_t *i2c) {
const size_t IC_TX_BUFFER_DEPTH = 16;
return IC_TX_BUFFER_DEPTH - i2c_get_hw(i2c)->txflr;
}
2022-03-21 12:07:03 +08:00
Petro Karashchenko
3fff4508c7
netinitialize: call xxx_netinitialize unconditionally
...
The xxx_netinitialize is defined to a function only if
CONFIG_NET=y and CONFIG_NETDEV_LATEINIT=n. Otherwise it
is defined to an empty macro.
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
2022-03-19 17:41:33 +08:00
Huang Qi
edef327655
arch/arm: Move ARCHCPUFLAGS to Toolchain.defs
...
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
2022-03-19 02:24:00 +08:00
Petro Karashchenko
c1fb14ccaa
boards/arm/samv7/same70-qmtech: add /dev/timer0 support
...
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
2022-03-19 02:21:03 +08:00
wangbowen6
7de7ba1b7e
phy62xx_exception: using armv6-m exception_common code.
...
Signed-off-by: wangbowen6 <wangbowen6@xiaomi.com>
2022-03-18 20:01:00 +08:00
chao.an
19119a9c43
arch/arm: set the SP to stack top
...
fix the stack imbalance
Signed-off-by: chao.an <anchao@xiaomi.com>
2022-03-18 07:56:51 +09:00
Petro Karashchenko
c3bae60c57
drivers/can: optimize can driver reader side
...
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
2022-03-17 15:43:15 +08:00
SPRESENSE
c05ace557f
arch: cxd56xx: Fix critical section in serial transmission
...
Fix an issue that the serial transmission buffers are corrupted because
serial transmission are not protected by critical section in non-smp mode.
2022-03-16 20:23:41 +09:00
Petro Karashchenko
985829190e
arch/arm/samv7/sam_tc: implement timer driver support
...
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
2022-03-16 03:19:57 +08:00
Matthew Trescott
8c471db932
Corrections to Tiva KConfig
2022-03-15 11:32:31 -04:00
Matthew Trescott
bc80bbddc7
Add Tiva CAN driver
2022-03-15 11:32:31 -04:00
chao.an
81130bc692
arch/arm: remove unused arm_copyfullstate/arm_copyarmstate
...
Signed-off-by: chao.an <anchao@xiaomi.com>
2022-03-15 23:03:51 +09:00
chao.an
7b9978883c
arch/arm: optimize context switch speed
...
The current context save implementation saves registers of each task
to xcp context, which is unnecessary because most of the arm registers are
already saved in the task stack, this commit replace the xcp context with
stack context to improve context switching performance and reduce the tcb
space occupation of tcb instance.
Signed-off-by: chao.an <anchao@xiaomi.com>
2022-03-15 23:03:51 +09:00
Petro Karashchenko
b04447d066
timer_lowerhalf: minor improvements
...
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
2022-03-15 10:30:48 +08:00
Xiang Xiao
b6bc460b2c
arch: Make the comment and definition of CONFIG_SYS_RESERVED correctly
...
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-03-14 22:51:00 +02:00
chao.an
ea42981cc6
syscall/names: export the syscall name in STUB module
...
Signed-off-by: chao.an <anchao@xiaomi.com>
2022-03-14 21:37:53 +02:00
chao.an
d398ffb930
arm/armv7-a/r: unified syscall registers dump
...
Signed-off-by: chao.an <anchao@xiaomi.com>
2022-03-14 21:37:53 +02:00
chao.an
7c02432f0e
arm/armv7-a/r: set the default CPU mode to System
...
In SVC mode, the banked register will be inconsistent with the user mode register:
arch/arm/src/armv7-a/arm_vectors.S
276 .globl arm_syscall
277 .globl arm_vectorsvc
278 .type arm_vectorsvc, %function
279
280 arm_vectorsvc:
...
286 sub sp, sp, #XCPTCONTEXT_SIZE // < SVC mode SP
...
308 stmia r0, {r13, r14}^ // < USR mode SP/LR
...
[ 2.200000] [ 4] [ ALERT] SYSCALL Entry: regs: 0x80202708 cmd: 4
[ 2.200000] [ 4] [ ALERT] R0: 00000004 80001229 00000001 80202018 00000000 00000000 00000000 802027d0
[ 2.200000] [ 4] [ ALERT] R8: 00000000 00000000 00000000 00000000 00000000 802027d0 1080f710 1080f710
[ 2.200000] [ 4] [ ALERT] CPSR: 00000073
[ 2.200000] [ 4] [ ALERT] SYSCALL Exit: regs: 0x80202708
[ 2.200000] [ 4] [ ALERT] R0: 1 80202018 1 80202018 0 0 0 802027d0
[ 2.200000] [ 4] [ ALERT] R8: 0 0 0 0 0 802027d0 1080f710 80001229
[ 2.200000] [ 4] [ ALERT] CPSR: 00000070
SVC SP is 0x80202708
USR SP is 0x802027d0
0x802027d0 - 0x80202708 should be XCPTCONTEXT_SIZE
[ 2.200000] [ 4] [ ALERT] SYSCALL Entry: regs: 0x80202708 cmd: 51
[ 2.200000] [ 4] [ ALERT] R0: 00000033 00000000 80202780 00000000 00000000 00000000 00000000 80202710
[ 2.200000] [ 4] [ ALERT] R8: 00000000 00000000 00000000 00000000 00000000 80202710 800039d5 800039b2
[ 2.200000] [ 4] [ ALERT] CPSR: 00000070
[ 2.200000] [ 4] [ ALERT] SYSCALL Exit: regs: 0x80202708
[ 2.200000] [ 4] [ ALERT] R0: 2b 0 80202780 0 0 0 0 80202710
[ 2.200000] [ 4] [ ALERT] R8: 0 0 0 0 0 10843d80 800039d5 10801425
[ 2.200000] [ 4] [ ALERT] CPSR: 00000073
SVC SP is 0x80202708
USR SP is 0x80202710
SP overlap in SVC and USR mode
This commit change the default CPU mode to System and ensure the consistency of SP/LR in USR/SYS mode during syscall.
Signed-off-by: chao.an <anchao@xiaomi.com>
2022-03-14 19:54:53 +09:00
Xiang Xiao
54e630e14d
arch: Merge up_arch.h into up_internal.h
...
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-03-14 09:32:17 +02:00
Xiang Xiao
c96c96a399
drivers: Merge the common driver initialization into one place
...
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-03-13 11:24:48 -03:00
Xiang Xiao
39fb09738d
arch: Move [arm|xtensa]_intstack_[alloc|top] to common header file
...
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-03-11 23:08:07 +02:00
Xiang Xiao
17d1a48fc9
arch: Remove up_puts prototype from up_inernal.h
...
since it's defined in include/nuttx/arch.h now
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-03-11 23:08:07 +02:00
Petro Karashchenko
fc9e2d272e
arch/arm/arm[-a|-r]: fix typos in comments
...
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
2022-03-11 11:08:01 +08:00
Xiang Xiao
29cb85ba17
arch/stm32: Fix compiler warning
...
chip/stm32_i2s.c:1949:12: error: conflicting types for built-in function 'roundf'; expected 'float(float)' [-Werror=builtin-declaration-mismatch]
1949 | static int roundf(float num)
| ^~~~~~
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-03-10 19:46:01 +02:00
Xiang Xiao
a07dc2363e
c5471/c5471_irq.c: Fix error: '__builtin_memcpy' forming offset [4, 31] is out of the bounds [0, 4] of object '_svectors' with type 'int'
...
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-03-10 19:46:01 +02:00
Huang Qi
69cfe8d626
arch/arm: Support setjmp/longjmp for all socs
...
After check the official specification of ARM ISA
and Thumb ISA, the arch_setjmp_thumb.S are written
by arm unified assembly language,
so it easy to make it works for ARM and thumb ISA.
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
2022-03-09 17:13:21 +02:00
Richard Tucker
4888be37e3
arch/arm/src/sam34/sam_dmac.c: Fix compilation error
2022-03-09 10:18:32 +08:00
Huang Qi
bfedbf1c05
arm/imx6: Enable setjmp test in ostest
...
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
2022-03-08 21:00:29 +08:00
Huang Qi
cfff115f21
arm: Move setjmp to common place
...
Since some Cortex A core supports thumb mode also,
thus they can share same implementation.
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
2022-03-08 21:00:29 +08:00
Juha Niskanen
779665c704
arch/arm/src/stm32l4: STM32L4+ might need flash data cache corruption workaround
...
Signed-off-by: Juha Niskanen <juha.niskanen@haltian.com>
2022-03-04 14:00:20 +08:00
Oleg Evseev
625d230d28
arch/arm/src/stm32f7/stm32_can.c: fix CAN3 receiving
...
by fixing filter initialization.
STM32F7 CAN3 works in single peripheral configuration and there is only 14 filter banks: 0-13. Previously not available 14 indexed filter (CAN_NFILTERS/2) was wrongly used for for receiving to FIFO. Now zero indexed filter is correctly used instead.
2022-03-03 14:31:37 -03:00
zhuyanlin
5af1b671b6
armv7-a/armv7-r:cache: modify hardcode in cache set/way operation
...
Some chip not use the default cache size & way , read from
CCSIDR instead of hardcode.
Signed-off-by: zhuyanlin <zhuyanlin1@xiaomi.com>
2022-03-03 14:11:31 +08:00
Masayuki Ishikawa
2a434fe1fa
arch: imx6: Add the pgheap for imx6
...
Summary:
- This commit adds the pgheap for imx6
Impact:
- None
Testing:
- Tested with sabre-6quad:netknsh (not merged yet)
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2022-03-01 12:18:47 +08:00
Xiang Xiao
da954956e7
Simplify DEFAULT_SMALL usage in Kconfig
...
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-03-01 03:15:01 +08:00
chao.an
0961f12e28
arm/phy62xx: remove unused private header
...
Signed-off-by: chao.an <anchao@xiaomi.com>
2022-03-01 00:33:58 +08:00
Masayuki Ishikawa
56e0e6a5ec
arch: imx6: Remove sem_t from imx_serial.c
...
Summary:
- I noticed that when exiting getprime, DEBUGASSERT happens in
nxsem_wait()
- Finally, I found that up_putc() uses nxsem_wait()
- This commit fixes this issue by removing the semaphore.
- Also, up_putc() now calls imx_lowputc()
Impact:
- None
Testing:
- Tested with sabre-6quad:netknsh (not merged yet)
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2022-02-28 16:09:01 +08:00
Masayuki Ishikawa
a75d905760
arch: imx6: Refactor imx_lowputc()
...
Summary:
- Remove '\n' -> '\r\n' conversion
- Remove waiting for FIFO empty after sending a character
- Remove CONFIG_DEBUG_FEATURES
Impact:
- None
Testing:
- Tested with sabre-6quad:netknsh (not merged yet)
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2022-02-28 16:09:01 +08:00
Xiang Xiao
872c570343
arch: Align the implementation of stack related functions
...
arm: Avoid call k[u]mm_memalign to save the code size
ceva: Correct stack_base_ptr usage(top of stack v.s. bottom of stack)
mips: Correct the stack alignment in up_use_stack
misoc: Correct the stack alignment in up_use_stack
or1k: Correct the stack alignment in up_use_stack
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-02-28 15:05:41 +08:00
Xiang Xiao
3bf416e8b8
arch: Move STACK_ALIGNMENT definition to up_internal.h
...
to avoid the same macro duplicate to many place
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-02-28 15:05:41 +08:00
Xiang Xiao
44bd3212d4
arch: Remove SYS_RESERVED from Kconfg
...
let's arch define the correct value instead
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-02-27 22:54:13 +08:00
Xiang Xiao
087b9e5ff3
arch: Move the content from svcall.h to syscall.h
...
and remove svcall.h
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-02-27 22:54:13 +08:00
Xiang Xiao
0c7517e579
arch: Remove the duplicated syscall.h in each arch
...
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-02-27 22:54:13 +08:00
chao.an
b57e0b6118
arm/armv7-a/r: check ARMV7A_DECODEFIQ on dataabort
...
Signed-off-by: chao.an <anchao@xiaomi.com>
2022-02-27 17:25:22 +09:00
chao.an
c369e47107
arm/armv7-a/r: handle swi on interrupt stack
...
Signed-off-by: chao.an <anchao@xiaomi.com>
2022-02-27 17:25:22 +09:00
lp.xiao
fac10b6ebd
stm32f103re has a dac module.but the pinmap file has no corresponding definition
2022-02-27 14:39:17 +08:00
Xiang Xiao
b95022f8de
arm/armv7-a: Remove CONFIG_SMP guard from arm_scu.c
...
since ACTLR.SMP need enable to make cache work on Cortex A7:
https://developer.arm.com/documentation/ddi0464/f/CHDBIEIF
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-02-26 14:15:30 +09:00
Masayuki Ishikawa
de95a8550f
arch, board: Add thumb support to i.MX6
...
Summary:
- This commit adds thumb support to i.MX6
- Also, applies the same coding style to arch_elf.c
Impact:
- i.MX6 only
Testing:
- Tested with sabre-6quad:smp (QEMU, Dev board)
- Tested with sabre-6quad:netnsh (QEMU)
- Tested with sabre-6quad:netknsh (QEMU, not merged yet)
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2022-02-25 10:51:12 +08:00
Xiang Xiao
25213c42a5
arch/arm: Remove the empty spinlock.h file
...
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-02-25 09:18:53 +09:00
Anton Potapov
9603b8f67c
Add DAC2 configuration for stm32f405.
2022-02-24 12:09:41 -05:00
Xiang Xiao
d7fe0127b0
Replece clock_gettime(CLOCK_REALTIME) with clock_systime_timespec if suitable
...
it's better to call the kernrel api insteaad user space api in kernel
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-02-24 01:06:36 +08:00
Xiang Xiao
43f57240e0
Replece clock_gettime(CLOCK_MONOTONIC) with clock_systime_timespec
...
it's better to call the kernrel api insteaad user space api in kernel
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-02-24 01:06:36 +08:00
chao.an
13889ba868
arch/arm: unify some duplicate code to common layer
...
Signed-off-by: chao.an <anchao@xiaomi.com>
2022-02-23 21:35:55 +08:00
chao.an
6cc0aaf5b9
arch/arm: unify switch context from software interrupt
...
Signed-off-by: chao.an <anchao@xiaomi.com>
2022-02-23 15:04:29 +09:00
chao.an
db3a40ac25
arch/armv7-r: unify switch context from software interrupt
...
Signed-off-by: chao.an <anchao@xiaomi.com>
2022-02-23 15:04:29 +09:00
chao.an
61cd9dfca1
arch/armv7-a: unify switch context from software interrupt
...
Signed-off-by: chao.an <anchao@xiaomi.com>
2022-02-23 15:04:29 +09:00
Gregory Nutt
1ded8bbabb
Garbage configuration setting in EFM32 code
...
arch/arm/src/efm32/efm32_start.c:
/* For the case of the separate user-/kernel-space build, perform whatever
* platform specific initialization of the user memory is required.
* Normally this just means initializing the user space .data and .bss
* segments.
*/
#ifdef CONFIG_NUTTX_KERNEL
efm32_userspace();
showprogress('E');
#endif
But there is no CONFIG_NUTTX_KERNEL configuration setting. Comparing this to other architectures it is clear this should be
#ifdef CONFIG_BUILD_PROTECTED
2022-02-23 03:40:44 +08:00
Xiang Xiao
f1ed349dd9
sched/clock: Remove CLOCK_MONOTONIC option from Kconfig
...
here is the reason:
1.clock_systime_timespec(core function) always exist regardless the setting
2.CLOCK_MONOTONIC is a foundamental clock type required by many places
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-02-23 01:21:26 +08:00
chao.an
0aa0022b12
arch/armv7-a: replace SYS_signal_handler_return hardcode
...
Signed-off-by: chao.an <anchao@xiaomi.com>
2022-02-22 17:59:02 +08:00
chao.an
e0fabbfdd6
arch/arm: replace SYS_syscall_return hardcode from syscall
...
Signed-off-by: chao.an <anchao@xiaomi.com>
2022-02-22 17:59:02 +08:00
Xiang Xiao
163fe4ff0b
boards: Replace CONFIG_CYGWIN_WINTOOL with CONVERT_PATH
...
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-02-20 21:15:36 +01:00
Xiang Xiao
1d1bdd85a3
Remove the double blank line from source files
...
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-02-20 20:10:14 +01:00
Oki Minabe
e9a94a003d
old arm: add BUILD_KERNEL code in arm/arm_vectors.S
2022-02-20 21:03:54 +09:00
Oki Minabe
19e5c8f6d3
armv7-a/r: fix SVC's sp restore in arm_vectors.S
2022-02-20 18:39:30 +08:00
Xiang Xiao
d29f3bd21c
arm/rtl8720c: Remove the unused Toolchain.defs
...
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-02-20 04:15:34 +01:00
lp.xiao
bc12260540
dp83848c ethernet phy interrupt support
2022-02-17 08:00:53 +01:00
Alan Rosenthal
8defb843aa
Remove duplicate linker script definitions
...
## Summary
A lot of linker scripts were listed twice, once for unix, once for windows.
This PR cleans up the logic so they're only listed once.
## Impact
Any opportunity to use a single source of truth and reduce lines of code is a win!
## Testing
CI will test all build
2022-02-17 02:55:25 +08:00
Oki Minabe
68a305438b
fix armv7-a gtm.h GTM_COMP1 and GTM_AUTO defines.
2022-02-16 18:50:42 +01:00
Oki Minabe
c1ea37742b
fix arm FPSCR typos in comments.
2022-02-17 01:08:11 +08:00
Simon Filgis
cf008c94cc
arch/arm/samv7: fix peripheral id shift during transmit xdma configuration
2022-02-16 17:16:53 +01:00
Masayuki Ishikawa
b60b6120de
arch: armv7-a: Fix arm_syscall for SYS_pthread_start
...
Summary:
- I noticed that pthread always crashes when started
if CONFIG_BUILD_KERNEL=y
- This commit fixes this issue
Impact:
- None
Testing:
- Tested with sabre-6quad:netknsh (not merged yet)
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2022-02-16 13:06:25 +01:00
Petro Karashchenko
41c95da594
register_driver: fix driver modes accross the code
...
State of problem:
- Some drivers that do not support write operations (does not
have write handler or ioctl do not perform any write actions)
are registered with write permissions
- Some drivers that do not support read operation (does not
have read handler or ioctl do not perform any read actions)
are registered with read permissions
- Some drivers are registered with execute permissions
Solution:
- Iterate code where register_driver() is used and change 'mode'
parameter to reflect the actual read/write operations executed
by a driver
- Remove execute permissions from 'mode' parameter
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
2022-02-16 16:15:29 +08:00
Masayuki Ishikawa
34cf6949ac
arch: armv7-a: Add debug messages for addrenv
...
Summary:
- This commit adds debug messages for addrenv
Impact:
- None
Testing:
- Tested with sabre-6quad:netknsh (not merged yet)
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2022-02-15 17:22:52 +08:00
Masayuki Ishikawa
e7cb1b4fb1
arch: rt8920c: Move -fno-common option to ARCHCFLAGS/ARCHCXXFLAGS
...
Summary:
- Apply the same style as sabre-6quad
Impact:
- None
Testing:
- Build only
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2022-02-15 16:27:53 +08:00
fenghang
555d25633a
add phyplus_rel_1.4
...
update source for phyplus driver rel_1.4
update source for phyplus driver rel 1.4
update source for phyplus driver 1.4
update phy6222 config files
2022-02-15 10:21:10 +08:00
Xiang Xiao
4207882cdc
arm/armv8-m: Handle the special irq correctly in up_secure_irq
...
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-02-15 09:45:34 +09:00
David Sidrane
1ca952243c
stm32h7:flash can not use usleep
...
commit 328374f4658d11655f268f968f4c6c7a3942f320
changed the wait to use usleep. This killed the
write performace from the published values in the
datasheet of ~100 us to 2 mS per 256 bits. On
a 1000 per tick config. It can be 10 X worse
on the default 100 per tick config.
This changes uses up_udelay.
2022-02-15 02:09:04 +08:00
David Sidrane
8659a31c9d
stm32h7:flash Fix lock violations
2022-02-15 02:09:04 +08:00
David Sidrane
8ca4cf49b1
stm32h7:Fix build for all config {R|T}XDMA states
2022-02-14 18:43:30 +01:00
Xiang Xiao
17a7d612df
arch: Replace nx_vsyslog with vsyslog
...
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-02-14 09:41:45 -03:00
chao.an
4be416a2a8
arm/backtrace: fix the compile warning
...
Signed-off-by: chao.an <anchao@xiaomi.com>
2022-02-14 16:29:38 +08:00
raiden00pl
00917bfe9d
stm32/fdcan: add CAN FD frames support
2022-02-14 10:42:01 +08:00
raiden00pl
dd8408a973
stm32/fdcan: use array indexes when accessing RX/TX FIFO
2022-02-14 10:42:01 +08:00
Michael Jung
70dae3bb3b
Add arm_tcbinfo.c to stm32u5's common C sources
...
And re-order the list of common C sources alphabetically.
Signed-off-by: Michael Jung <mijung@gmx.net>
2022-02-13 16:32:35 +08:00
Michael Jung
5c1c939cdc
stm32u5: Architecture Support for STM32U5
...
Architecture support for STMicroelectronics STMU585xx MCUs. This is
based on corresponding code for STM32L5, but has been considerably
adjusted. Tested with a B-U585I-IOT02A board and a simple NSH
configuration, but only running NuttX in the non-secure world with
TrustedFirmware-M.
Signed-off-by: Michael Jung <mijung@gmx.net>
2022-02-13 16:32:35 +08:00
Michal Lenc
56b3fc0ef9
arch/arm/src/samv7: added support for PWM driver
...
This commit adds initial support for PWM driver to SAM MCU series.
Only general PWM on PWMH output is currently supported, complementary
output on PWML is not allowed. The current state of the driver also does
not support external triggering of other perihperals.
Multichannel option is supported. The functionality of the driver was
tested on an example pwm application and with a real time control system.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
2022-02-13 03:20:07 +08:00
Huang Qi
95b0c85f58
arch: Add xxx_tcbinfo.c to SoC level Make.defs
...
Fix build break with CONFIG_DEBUG_TCBINFO enabled.
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
2022-02-12 21:07:35 +09:00
zhuyanlin
3ab65f9b08
armv7-a/r: use flush/clean_all if size large than cache size
...
For cache flush/clean performance
Signed-off-by: zhuyanlin <zhuyanlin1@xiaomi.com>
2022-02-09 18:16:31 +01:00
zhuyanlin
4eba2f3527
armv7-a/r:cache: add cp15_cache_size function
...
Add cp15_cache_size function for armv7-a/r
Signed-off-by: zhuyanlin <zhuyanlin1@xiaomi.com>
2022-02-09 18:16:31 +01:00
Huang Qi
c0a0de97ce
Revert "libc: Call pthread_exit in user-space by up_pthread_exit"
...
This reverts commit f4a0b7aedd
.
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
2022-02-09 21:21:43 +08:00
Alin Jerpelea
7a674b6287
Makefiles: change license to Apache
...
Make files are recipes based on contributions from from Gregory Nutt
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
2022-02-09 19:58:52 +08:00
zhuyanlin
cc8ab23550
armv7-r/a: fix a4 register use in xxx_invalidate/flush/clean_all.S
...
Use sub loop instead of add loop
Signed-off-by: zhuyanlin <zhuyanlin1@xiaomi.com>
2022-02-08 19:39:43 +09:00
SPRESENSE
8de07b2ae8
boards: cxd56xx: audio: Support I2S input
...
Enable the driver setting of I2S input.
2022-02-08 10:47:03 +01:00
raiden00pl
bc178344a9
net/can: add an option to control CAN EXTID support
2022-02-06 17:09:11 +08:00
raiden00pl
341bbe38d5
arch/stm32: add FDCAN SocketCAN support
2022-02-06 17:09:11 +08:00
Petro Karashchenko
e545c440f4
arch/arm/samv7/sam_progmem: insert DMB instruction into data write loop
...
This change fix the regression that was introduced with
https://github.com/apache/incubator-nuttx/pull/4904
In case if D-Cache in configured in Write-Through mode there is
Cortex-M7 erata 1313001 that describes a situation when linefill
buffer or cache contains stale data. Even if progmem write loop
does not fully matches the description there is a possibility
to program stale data if there is no DMB instruction after each
write operation to progmem latch buffer.
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
2022-02-05 03:14:07 +08:00
Petro Karashchenko
47a09ed255
arch/arm/samv7: add arm_systemreset.c to CMN_CSRCS
...
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
2022-02-04 16:40:50 +08:00
chao.an
ed4f852073
arch/arm: correct the sched_lock/spin_lock handling
...
Signed-off-by: chao.an <anchao@xiaomi.com>
2022-02-03 11:09:18 -03:00
chao.an
d59931159a
arch/arm: fix leaving from critical section
...
Signed-off-by: chao.an <anchao@xiaomi.com>
2022-02-02 21:45:13 +08:00
Xiang Xiao
4c167b0729
Correct the code alignment
...
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-02-01 21:22:21 -03:00
Petro Karashchenko
601a0e8a32
arch/arm/samv7: fix leaving from critical section in HSMCI callback
...
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
2022-01-31 16:56:52 -03:00
Xiang Xiao
2c3020ddaf
arch/Toolchain.defs: Replace --print-file-name=libgcc.a with --print-libgcc-file-name
...
to more compatable with clang: https://reviews.llvm.org/D25338
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-01-31 09:46:04 +01:00
Xiang Xiao
e0b62bf677
arch/Toolchain.defs: Don't expand EXTRA_LIBS immediately
...
since board's Make.defs may overwrite ARCHCPUFLAGS
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-01-30 11:04:35 +09:00
David Sidrane
0f1342f36b
stm32:Add OTG ID GPIO disable
2022-01-30 01:50:37 +08:00
David Sidrane
99083b8dd1
stm32{f|h}7:Fixed typo in Kconfig help
2022-01-30 01:49:57 +08:00
chao.an
7d8c2c1ad6
cortex-m/doirq: do not update the CURRENT_REGS on nested interrupt handling
...
current implementation incorrectly update CURRENT_REGS to interrupt context if
trigger nested interrupt, (e.g, hard fault occurs during interrupt handling)
this would ambiguous for programs using CURRENT_REGS, this patch will prohibit
the update of CURRENT_REGS on nested interrupt handling
Signed-off-by: chao.an <anchao@xiaomi.com>
2022-01-29 01:04:00 +08:00
Xiang Xiao
1c2c0e4707
arch/Toolchain.defs: Simplify the builtin library addition for EXTRA_LIBS
...
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-01-28 12:02:38 +01:00
Petro Karashchenko
0ffffe19b1
typo: change evernt to event in comments
...
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
2022-01-27 09:57:31 -03:00
Xiang Xiao
f903a55102
sched/tcbinfo: Fix the compile warning
...
Update tcbinfo struct
armv8-m/arm_tcbinfo.c:109:3: warning: excess elements in struct initializer
109 | TCB_REG_OFF(REG_S31),
| ^~~~~~~~~~~
armv8-m/arm_tcbinfo.c:109:3: note: (near initialization for 'g_tcbinfo')
armv8-m/arm_tcbinfo.c:110:3: warning: excess elements in struct initializer
110 | 0,
| ^
armv8-m/arm_tcbinfo.c:110:3: note: (near initialization for 'g_tcbinfo')
armv8-m/arm_tcbinfo.c:111:3: warning: excess elements in struct initializer
111 | TCB_REG_OFF(REG_FPSCR),
| ^~~~~~~~~~~
armv8-m/arm_tcbinfo.c:111:3: note: (near initialization for 'g_tcbinfo')
armv8-m/arm_tcbinfo.c:112:3: warning: excess elements in struct initializer
112 | 0,
| ^
armv8-m/arm_tcbinfo.c:112:3: note: (near initialization for 'g_tcbinfo')
armv8-m/arm_tcbinfo.c:37:1: warning: missing braces around initializer [-Wmissing-braces]
37 | {
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Signed-off-by: zhuyanlin <zhuyanlin1@xiaomi.com>
2022-01-27 17:36:27 +08:00
zhuyanlin
644c2be3aa
armv7-a/r:cache: implemention clean&flush_dcache_all
...
For armv7-a/r cache:
And clean_dcache_all, flush_dcache_all
Signed-off-by: zhuyanlin <zhuyanlin1@xiaomi.com>
2022-01-27 15:15:28 +08:00
zhuyanlin
1b08f607be
arm/xtensa:cache: flush/clean dcache all if size large than cache size
...
For performance, if size large than cache size, use xxx_all instead
Signed-off-by: zhuyanlin <zhuyanlin1@xiaomi.com>
2022-01-27 15:15:28 +08:00
zhuyanlin
4d5c2586a9
armv7-a/r:cp15_invalidate_dcache_all: fix Sets mask error.
...
As NumSets field is bits 13-27, use 0x7fff instead.
And add way to get from CCSIDR.
2022-01-27 15:13:08 +08:00
Petro Karashchenko
48211f90d3
ci: select ARMV7A_TOOLCHAIN_GNU_EABIL for ARMv7-A based builds
...
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
2022-01-25 20:24:28 +08:00
Masayuki Ishikawa
7b1cf2dfac
arch: arm: Fix make export for armv7-a SoCs
...
Summary:
- I noticed that make export does not work with swama5d4-ek:knsh
- This commit fixes this issue.
- NOTE: apps/Makefile also needs to be updated.
Impact:
- CONFIG_BUILD_KERNEL=y only
Testing:
- Build (make and make export) with sama5d4-ek:knsh
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2022-01-25 11:05:22 +08:00
Norman Rasmussen
da5659138b
Fix regression where used code was marked as unused
...
Commit 5d1a444812
replaced __attribute__
((unused)) with unused_code but two instances of __attribute__ ((used))
were also incorrectly replaced. Add used_code/used_data and used them
instead.
2022-01-23 14:57:19 +08:00
raiden00pl
4c2dd3924a
include/nuttx/can.h: rename CAN_ERR_CTRL to CAN_ERR_CRTL for compatibility with libcanutils
2022-01-23 01:34:34 +08:00
Petro Karashchenko
6c27f3c19d
toolchain: add libm to EXTRA_LIBS only if it is provided by the compiler
...
Some toolchains may be built without libm support, but using
such toochain should not generate any errors in case if math
functions are not used in the program
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
2022-01-22 15:36:29 +08:00
Xu Xingliang
021363f1db
driver/mmcsd: add option to limit block count in multiple-block transfer mode.
...
Signed-off-by: Xu Xingliang <xuxingliang@xiaomi.com>
2022-01-22 14:59:26 +08:00
zouboan
0342272e5a
up_progmem_erasesize for stm32f20xxf40xx_flash.c
2022-01-21 14:57:32 +08:00
Xiang Xiao
2935751bfd
Fix error: implicit declaration of function 'up_cpu_index'
...
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-01-20 23:21:21 +08:00
Xiang Xiao
77792a1598
sched: Define CONFIG_SMP_NCPUS to 1 in no SMP case
...
to simplify the SMP related code logic
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-01-20 23:21:21 +08:00
Petro Karashchenko
08043fb5bc
net: unify FAR keyword usage for all net buffer memory mapped buffers
...
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
2022-01-20 01:42:56 +08:00
Petro Karashchenko
767cf282c7
boards/arm/samv7: move HSMCI interface to common
...
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
2022-01-20 01:24:14 +08:00
Daniel Agar
12c8a9626c
stm32f7 serial fix PM_CONFIG build
2022-01-20 01:08:06 +08:00
Petro Karashchenko
a6147109b1
arch/arm/src/armv6-m: fix typo
...
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
2022-01-19 15:32:58 +01:00
Xiang Xiao
8bcdefafc9
board: Remove -fno-strength-reduce
...
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-01-19 00:14:03 +01:00
Petro Karashchenko
9551de7115
net: use HTONS, NTOHS, HTONL, NTOHL macro in kernel code
...
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
2022-01-18 10:59:47 +01:00
raiden00pl
e140ba1a21
arch/stm32: fdcan cosmetics
2022-01-17 09:36:00 -03:00
raiden00pl
c450dea6e5
stm32: add FDCAN support
...
based on PR #2987
2022-01-17 09:36:00 -03:00
Petro Karashchenko
4f98ac4879
arch/arm/samv7: implement quadrature encoder driver
...
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
2022-01-17 09:35:12 -03:00
Petro Karashchenko
8d3bf05fd2
include: fix double include pre-processor guards
...
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
2022-01-16 11:11:14 -03:00
chao.an
c27839f98e
arm/xtensa: save the running registers to xcp context
...
Signed-off-by: chao.an <anchao@xiaomi.com>
2022-01-15 02:20:01 +08:00
Jari van Ewijk
3aed0aa641
S32K1XX: implement uniqueid
2022-01-13 15:34:47 -08:00
Jari van Ewijk
0fc613f0b3
S32K1XX Reset Cause PROCFS: Add Kconfig option and cleanup
2022-01-13 01:29:42 +08:00
Xiang Xiao
1b77ae88ef
fs/procfs: Remove the unnecessary strcmp
...
since the procfs already make the same check for us
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-01-12 07:19:40 +01:00
Petro Karashchenko
a743fed63d
file_operations: get back C89 compatible initializer
...
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
2022-01-11 02:14:00 +08:00
Petro Karashchenko
1fd51ccbe2
arch/arm/samv7: rework SAMv7 timer counter implementation
...
There are two issues that are addressed with this change:
- According to SAM E70/S70/V70/V71 Family datasheet the
timer counter channels are 16-bit so timer counter
value should be changed from uint32_t to uint16_t
- The interrupt handling for timer counter channels can
be simplified
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
2022-01-09 17:43:31 +08:00
Petro Karashchenko
e7f9c7af21
typos: fix typos in Kconfig files
...
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
2022-01-08 06:46:26 -03:00
chao.an
8c35d31808
Kconfig: Remove CONFIG_ prefix from config definition
...
Signed-off-by: chao.an <anchao@xiaomi.com>
2022-01-07 13:16:18 +08:00
raiden00pl
6fe95d8314
stm32: add SocketCAN support, based on stm32_can.c
2022-01-05 06:16:41 -08:00
Zeng Zhaoxiu
fb43fd73ed
signal: signal handler may cause task's state error
...
For example, task is blocked by nxsem_wait(sem1), use nxsem_wait(sem2)
in signal handler, and take sem2 successfully, after exit from signal
handler to task, nxsem_wait(sem1) returns OK, but the correct result
should be -EINTR.
Signed-off-by: Zeng Zhaoxiu <zhaoxiu.zeng@gmail.com>
2022-01-05 21:36:44 +09:00
raiden00pl
5b9b3814f8
stm32: add CAN error support
2022-01-05 18:33:06 +08:00
Petro Karashchenko
4b190fbce1
arch/arm/samv7: correct number on interrupts
...
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
2022-01-03 22:10:22 +08:00
Petro Karashchenko
6c2b40f98a
typos: fix typos in many files
...
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
2022-01-03 22:10:07 +08:00
Petro Karashchenko
c7d3a674fd
drivers/sensors/as5048b: fix lower half init issue
...
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
2022-01-03 11:38:44 +08:00
Petro Karashchenko
d23ad9b9b0
userspace: fix typos in comments
...
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
2022-01-02 20:50:30 +01:00
chao.an
736add0fe8
arch/backtrace: correct the skip counter
...
Signed-off-by: chao.an <anchao@xiaomi.com>
2021-12-30 16:57:40 +08:00
Xiang Xiao
b92c90ee81
arch/arm: Fix rebase error in arm_backtrace_thumb.c
...
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2021-12-29 20:42:05 +08:00
chao.an
7ed0b97414
make/allsyms: skip the unnecessary link operation
...
For incremental compilation, skip the stage 1 dummy link
operation if nuttx elf has been generated
Signed-off-by: chao.an <anchao@xiaomi.com>
2021-12-28 23:47:10 -06:00
Xiang Xiao
dd942f0b04
sched/backtrace: Dump the complete stack regardless the depth
...
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2021-12-29 12:09:54 +08:00
chao.an
cf2dfa8985
arch/arm/assert: move the arm_assert to common code
...
Signed-off-by: chao.an <anchao@xiaomi.com>
2021-12-28 05:09:30 -06:00
chao.an
579738c8fa
arch/arm: move the backtrace implement to common code
...
Signed-off-by: chao.an <anchao@xiaomi.com>
2021-12-28 03:02:01 -06:00
chao.an
a42aa8415d
compile/flags: add FRAME_POINTER into Toolchain.defs
...
Signed-off-by: chao.an <anchao@xiaomi.com>
2021-12-27 22:31:27 -06:00