* include: Introduce elf64.h and elf.h
Added elf64.h for 64bit ELF support and moved common definitions
from elf32.h to elf.h. Also introduced Elf_xxx to be used in
common libraries such as binfmt.
* binfmt, include, modlib, module: Add support for ELF64
Elf_xxx must be used instead of Elf32_xxx to support ELF64.
To use ELF64, CONFIG_ELF_64BIT must be enabled.
* binfmt, modlib: Add support for relocate address
* arch: risc-v: Add include/elf.h
* libs: machine: Add risc-v related files.
NOTE: Currently only supports ELF64
* boards: maix-bit: Add elf and posix_spawn configurations
* boards: maix-bit: Add support for module configuration
* S32K add support for Nxp drone boards
* Update arch/arm/src/s32k1xx/hardware/s32k1xx_rtc.h codestyle
Co-Authored-By: David Sidrane <David.Sidrane@Nscdg.com>
Co-authored-by: Jari van Ewijk <jari.vanewijk@nxp.com>
Co-authored-by: David Sidrane <David.Sidrane@Nscdg.com>
commit 39bd9ff670
Author: YAMAMOTO Takashi <yamamoto@midokura.com>
Date: Wed Jan 29 00:17:05 2020 +0900
sim: Prefix symbols with _ for non-ELF
Namely for Mach-O. Leave __CYGWIN__ case as it is.
* Serial Fixed interrupt storm
The target would randomly hang in the serial isr.
The priv->ie and the hardware were inconsistent.
The isr used the priv->ie to gate offloading
the RX data. Bang! Hung.
imxrt_disableuartint(priv, &ie);
ret = imxrt_setup(dev);
/* Restore the interrupt state */
imxrt_restoreuartint(priv, ie);
interrupt-> Of no return
priv->ie = ie;
On a fast cpu with FIFO, this will not work
with out proper protections.
* Serial: Conditionally enable 9 bit mode
* armv7-mi/mpu.hi: Restructure API
Preserve the existing API and enabled better granualriy on
setting.
* Enable MPU for non protected builds to set cache
* mpuinit use symbolic values for addresses
* Allow DTCM on HEAP
* allocateheap Fix Coding style
* ld doesn't have --start-groupi/--end-group things. As far as I know,
it works that way by default.
* objcopy with Mach-O support is not widely available.
(GNU binutils seem to claim the support but it didn't actually work
for me. llvm-objcopy --redefine-syms explicitly rejects Mach-O.)
Instead, use -unexported_symbols_list linker flag to hide symbols
to avoid conflicts with host symbols.
The recent x86-64 convention requires 16-byte alignment before
(not after) calling a function.
This fixes snprintf crash I observed on macOS while saving XMM registers.
All STM32L4 MPUs have FLASH_CR_PNB bits (8 bits), and some MPUs have FLASH_CR_BKER bit to change bank if page >= 256.
The code wasn't setting or clearing FLASH_CR_BKER correctly.
Author: Gregory Nutt <gnutt@nuttx.org>
Run .c modified by the PR through tools/nxstyle and correct all reporting coding style problems noted in the file.
Author: Satoshi Togawa <togawa@develcb210.centurysys.co.jp>
STM32L4: Add workaround of data cache corruption on RWW.
Some STM32L4 chips has eratta "Data cache might be corrupted during Flash Read While Write operation". This is also in STM32, and arch/arm/src/stm32/stm32f20xxf40xx_flash.c has workaround.
To enable this workaround, define CONFIG_STM32L4_FLASH_WORKAROUND_DATA_CACHE_CORRUPTION_ON_RWW.
Recent changes removed CONFIG_TIME_ENHANCED and unmasked some warnings. These warnings were caused by nuttx/time.h not being included by files that now referenced clock_daysbeforemonth() and clock_isleapyear().
This commit adds those missing inclusions and eliminates the warnings.
Co-authored-by: Gregory Nutt <gnutt@nuttx.org>
Fix these build errors which occurred if there was no PHY:
chip/lpc17_40_ethernet.c:1643:31: error: expected expression before ';' token
ret lpc17_40_phyinit();
chip/lpc17_40_ethernet.c:3941:1: error: expected identifier or '(' before '{' token
{
chip/lpc17_40_ethernet.c:448:13: warning: 'lpc17_40_macmode' used but never defined
static void lpc17_40_macmode(uint8_t mode);
Author: Xiang Xiao <xiaoxiang@xiaomi.com>
Fix warning: selects SDIO_DMA or SDIO_BLOCKSETUP which has unmet direct dependencies (MMCSD)
Fix warning: selects NETDEV_TELNET which has unmet direct dependencies (NETDEVICES && NET && NET_TCP)
Fix warning: selects ARCH_PHY_INTERRUPT which has unmet direct dependencies (NETDEVICES && ARCH_HAVE_PHY)
Fix warning: selects USBHOST_HAVE_ASYNCH which has unmet direct dependencies (USBHOST)
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Gregory Nutt <gnutt@nuttx.org>
Run all .c and .h files modified in this PR through nxstyle and correct all coding standard problems.
Xiang Xiao <xiaoxiang@xiaomi.com>
Remove TIME_EXTENDED option to more conform C standard
Note: the code/data size increment is small
Fix warning found in build testing: "warning: 'dac_interrupt' defined but not used [-Wunused-function]. The compiler is right, dac_interrupt is not used. It is, apparently, a placeholder for future interrupt support. Now conditioned out with #if 0 to suppress build test warnings.
Co-authored-by: Gregory Nutt <gnutt@nuttx.org>
sama5d3-xplained:ethernet-over-phy configuration found in build testing:
arch/arm/src/sama5/sam_irq.c: Fix "Control reaches end of non-void function " warning
arch/arm/src/sama5/sam_udphs.c: Fix "unused variable 'epno'" warning
boards/arm/sama5/sama5d*-*/src/sam_usb.c: Fix "warning 'HAVE_USBHOST' not defined" warnings
Author: Alan Carvalho de Assis <acassis@gmail.com>
Run nxstyle against .c and .h files and fix it
Author: Juha Niskanen <juha.niskanen@haltian.com>
Fix typos and some incorrect comments
* arch/arm/src/nrf52/hardware/nrf52_twi.h: fix typo
* arch/arm/src/nrf52/nrf52_i2c.c: add interrupts support and some debug messages
* boards/arm/nrf52/nrf52840-dk: add support for hts221 and lsm303agr; boards/arm/nrf52/nrf52840-dk: fix issues noted by nxstyle
Author: Alan Carvalho de Assis <acassis@gmail.com>
Run nxstyle on .c and .h files and fix it
Author: raiden00pl <raiden00pl@gmail.com>
arch/arm/src/nrf52: use the same naming convention for register defs
arch/arm/src/nrf52/hardware/nrf52_ficr.h: remove invalid defs
arch/arm/src/nrf52/hardware: add TIMER register defs
