This commit changes the FLexPWM driver for iMXRT MCU so that LDOK bits in
Master Control Register are set at once after all channels are configured.
Setting LDOK bit enables the driver to load prescaler, modulus and PWM
values of corresponging submodule and start PWM output. Setting all bits
at once instead of doing it separately can help avoiding the channels to
be out of sync with each other.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
Many duplicate code when more chips add-in,
follow arch/arm/include/irq.h method, use chip/irq.h instead.
Change-Id: I42f516c1dda68e973939c669f627c457cd0bc65e
In levelx(2,3,4,5)_handler, first need to save sp in a12,
then after dispatch_c_isr we can restore sp from a12.
Change-Id: Idb6b64a782da866670a4db80b33435a9b63f02c3
Some toolchain such as xtensa-xcc is unrecognize with constraint letter 'I',
letter 'i' is more common in GNU assembler.
Change-Id: I00f6a33fd7a5f2b95508c683e9954d402b68755f
In config with no "CONFIG_SPINLOCK", include arch/spinlock.h will lead to
build error as multi definition with spinlock_t. Nuttx/spinlock.h will
include arch/spinlock.h when needed.
Change-Id: I33b48503f679ec79af3a0ef1f0fb1536aaf1ce7c
When use poweroff command,host_abort will be called,but may be make __stack_chk_fail irq, and host_abort be called in PANIC(), so bring infinite loop, in turn it can not exit SIM.
Signed-off-by: buyuer <dingddding@163.com>
Currently the "esp32_spiflash_alloc_mtdpart" allocates a
statically-defined partition from "offset" and "size" set via
Kconfig.
This commit changes the function interface to receive those information
as arguments, enabling the creation of multiple MTD partitions with
different offsets and sizes.
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
Number of configured ADC channels is currently only defined in board
level section, typically in xxx_adc.c file. This commit introduces
ioctl command ANIOC_GET_NCHANNELS that returns the number of configured
channels which is determined by the driver code. The change can allow the
applications to be more flexible when it comes to multiple ADC devices
with different number of configured channels.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
so the source code compiled by host environment can include config.h
directly and then avoid pass Kconfig option through Makefile manually
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: Ic9fe6f846082cef2d0808dc717df8ae6ed929edf
Error: wqueue/kwork_thread.c:202:3: error: format '%x' expects argument of type 'unsigned int',
but argument 4 has type 'long unsigned int' [-Werror=format=]
snprintf(args, 16, "0x%" PRIxPTR, (uintptr_t)wqueue);
Signed-off-by: Jiuzhu Dong <dongjiuzhu1@xiaomi.com>
PWM drivers currently use channel number 0 for the channels that are not
used by the application. This commit adds number -1 which indicates that
all following channels are not configured and that the loop can be broken.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
arch/arm/src/stm32/Kconfig:
* In configs STM32_ADC_MAX_SAMPLES, STM32_FOC_HAS_PWM_COMPLEMENTARY:
Fix typos in help text.
arch/arm/src/stm32h7/Kconfig:
* In configs STM32H7_RTC_AUTO_LSECLOCK_START_DRV_CAPABILITY,
STM32H7_FLASH_CR_PSIZE, STM32H7_RTC_LSECLOCK_START_DRV_CAPABILITY,
and STM32H7_RTC_LSECLOCK_RUN_DRV_CAPABILITY: Fix typos in help text.
arch/arm/src/stm32l5/Kconfig:
* In configs STM32L5_FLOWCONTROL_BROKEN, STM32L5_SDMMC1_DMAPRIO: Fix
typos in help text.
arch/arm/src/stm32/hardware/stm32_exti.h:
* Change STM32_EXTI2_OFFSET (offset to EXTI2 registers) from 0x18
to 0x20. This symbol is defined when CONFIG_STM32_STM32F30XX or
CONFIG_STM32_STM32F33XX. According to the current reference
manuals for STM32F334xx (RM0364 rev 4) and STM32F302xx (RM0365
rev 8), EXTI_IMR1 is at offset 0x00 and EXTI_IMR2 is at offset
0x20, i.e., 0x20 apart. The same offset applies to the rest of
the registers: EMR1/EMR2, RTSR1/RTSR2, etc.
