Gregory Nutt
|
77c487b1ed
|
SAMA5D4: Has two XDMA modules
|
2014-06-04 14:39:52 -06:00 |
|
Gregory Nutt
|
975dc5ec46
|
SAMA5D4: Let's consistently use the name XDMAC for the SAMA5D4 DMA module
|
2014-06-04 14:39:29 -06:00 |
|
Gregory Nutt
|
7d6633c2a4
|
Minor naming fix
|
2014-06-04 13:35:48 -06:00 |
|
Gregory Nutt
|
5ddcb233cc
|
SAMA5: Add pin mux definitions for the SAMA5D4
|
2014-06-04 12:58:49 -06:00 |
|
Gregory Nutt
|
0342b3f10b
|
SAMA5: Rename most EMAC definitions to EMAC0 to handle the SAMA5D4 which has to EMAC modules and no GMAC
|
2014-06-04 12:04:24 -06:00 |
|
Gregory Nutt
|
41032b021b
|
SAMA4D4: Basic framework to support the SAMA4D4. Not yet complete
|
2014-06-03 17:49:51 -06:00 |
|
Gregory Nutt
|
cc369aa3d6
|
A few build fixes from last, big ARP relocation change
|
2014-05-30 12:32:20 -06:00 |
|
Gregory Nutt
|
407e72b300
|
Move include/nuttx/net/uip/uip-arch.h to include/nuttx/net/arp.h; rename all uip_arp_ functions to arp_
|
2014-05-30 12:13:06 -06:00 |
|
Gregory Nutt
|
b3abd30a76
|
Cosmetic changes
|
2014-05-28 14:09:58 -06:00 |
|
Gregory Nutt
|
3feabec7d5
|
STM32 RTC: Add retry to initialization logic. Sometime RTC initialization takes longer. From dlsitzer.
|
2014-05-27 07:10:53 -06:00 |
|
Gregory Nutt
|
c68f9477cf
|
Back out PX4 fixes that were reverted in PX4 repository
|
2014-05-25 07:53:00 -06:00 |
|
Gregory Nutt
|
5d3479bbec
|
STM32 I2C: Final fixes from Max Kriegleder et al.
|
2014-05-23 08:42:14 -06:00 |
|
Gregory Nutt
|
8dbc4714c5
|
Change all variadic macros to C99 style
|
2014-05-22 09:01:51 -06:00 |
|
Gregory Nutt
|
9e941f1195
|
Change bne to bne.n in irqrestore()
|
2014-05-22 09:01:25 -06:00 |
|
Gregory Nutt
|
bac1ab9a34
|
Make sure that all references to up_prioritize_irq() are conditioned on CONFIG_ARCH_IRQPRIO. Noted by Make Smith
|
2014-05-20 17:48:39 -06:00 |
|
Gregory Nutt
|
d2e1d8f6ee
|
STM32 lowputc: Fix an error in conditional compilation. From Sami Pelkonen
|
2014-05-20 08:12:07 -06:00 |
|
Gregory Nutt
|
b77854f245
|
SAM4E GPIO: Fix some compile errors when CONFIG_DEBUG_GPIO is enabled
|
2014-05-15 11:41:58 -06:00 |
|
Gregory Nutt
|
947f31f5a9
|
SAM4E-EK: Ooops.. two touchscreen drivers(?)
|
2014-05-14 10:56:03 -06:00 |
|
Gregory Nutt
|
5258e8d9e7
|
Fix one error that I made in the last check-in (there are probably more)
|
2014-05-14 08:09:08 -06:00 |
|
Gregory Nutt
|
fb774d677c
|
Add an alternate STM32 I2C driver that works around errata in the F103 chip (and maybe others). From Patrizio Simona
|
2014-05-14 07:48:47 -06:00 |
|
Gregory Nutt
|
697b0d5b61
|
correct some columnar alignment and spacing
|
2014-05-13 14:14:57 -06:00 |
|
Gregory Nutt
|
5d35f07278
|
STM32 I2C: Cosmetic changes in preparation to merge a change
|
2014-05-13 13:11:10 -06:00 |
|
Gregory Nutt
|
43fd4676da
|
SAM4E: PIO definition clean-up
|
2014-05-12 18:42:25 -06:00 |
|
Gregory Nutt
|
d9a20861a6
|
Updated README and comments
|
2014-05-10 11:36:20 -06:00 |
|
Gregory Nutt
|
fa7c79712e
|
STM32 I2C: Bring in PX4 fix for I2C in very high noise environments or with rogue perpipherals. Taken from the PX4 commit by Tridge
|
2014-05-10 10:34:05 -06:00 |
|
Gregory Nutt
|
308d0dbe06
|
Couple of fixes for the latest STM32 additions / modifications. These are simple fixes dealing with conditional compile based on CONFIG items not being set. From Ken Pettit
|
2014-05-09 06:41:01 -06:00 |
|
Gregory Nutt
|
02bb1d69b8
|
Add support for the STM32152 and STM32162 Medium+ density parts (plus miscellaneous other improvements to the original STM32151 logic). From Jussi Kivilinna and Sami Pelkonen
|
2014-05-08 09:20:11 -06:00 |
|
Gregory Nutt
|
af2bb81ac2
|
Add serial method so that lower half driver can provide RX flow control information. From Jussi Kivilinna
|
2014-05-08 09:00:33 -06:00 |
|
Gregory Nutt
|
1cc859405e
|
STM32: Rename pinmap.h files to better reflect the chip naming conventions
|
2014-05-07 13:05:12 -06:00 |
|
Gregory Nutt
|
6e9df4d5ab
|
STM32: Fix STM32F100CB pin configuration (from Kosma Moczek); and make chip naming a little more consistent
|
2014-05-07 12:54:27 -06:00 |
|
Gregory Nutt
|
1636d7cb2f
|
Ooops... last (cosmetic) changes were still in the editor
|
2014-05-06 15:00:39 -06:00 |
|
Gregory Nutt
|
422a9c9bfd
|
Optimized memcpy() functin for the ARMv7-A from David Sidrane
|
2014-05-06 14:58:48 -06:00 |
|
Gregory Nutt
|
a1871c7045
|
STM32: Add more complication to STM32 Kconfig so the correct RNG and ETHMAC options presented for the F401RE. There are still invalid peripheral options being presented
|
2014-05-06 11:35:13 -06:00 |
|
Gregory Nutt
|
ca31e38f7b
|
Nucleo-F401RE: With these changes and the changes from previous commits, the basic Nucleo-F401RE NSH configuration is working.
|
2014-05-06 11:07:10 -06:00 |
|
Gregory Nutt
|
acd40e73aa
|
The Nucleo-F401RE has no on-board cystal and, hence, must use the on-chip HSI oscillator for the PLL include clock
|
2014-05-06 10:01:02 -06:00 |
|
Gregory Nutt
|
bfa9df89e2
|
STM32: Add more complication to STM32 Kconfig so the correct ADC and CAN options presented for the F401RE. There are still invalid peripheral options being presented
|
2014-05-06 08:32:21 -06:00 |
|
Gregory Nutt
|
27d3a4962a
|
STM32: Add some complication to STM32 Kconfig so the correct USART and TIM options are presented for the F401RE. There are still invalid peripheral options being presented
|
2014-05-05 17:59:07 -06:00 |
|
Gregory Nutt
|
f72a873af9
|
Add SAM3/4 RTT driver. From Bob Doiron
|
2014-05-05 14:35:37 -06:00 |
|
Gregory Nutt
|
449ad68fa1
|
Correct some typos in STM32 RCC header files noted by Ramtin Amin
|
2014-05-05 07:23:26 -06:00 |
|
Gregory Nutt
|
42432ab1d0
|
STM32 F401 has no CCM memory
|
2014-04-30 16:49:39 -06:00 |
|
Gregory Nutt
|
d7b261eb46
|
Fix configuration for F401: It has has FSMC and so the option should not be offered. But there are many more options available for the F401 that should be availalbe: CAN, nonexistent timers, etc. These will all need to be addressed
|
2014-04-30 16:12:36 -06:00 |
|
Gregory Nutt
|
e317cef653
|
The CONFIG_SYSTEMTICK_EXTCLK selection should only be available on systems that support it
|
2014-04-30 15:32:06 -06:00 |
|
Gregory Nutt
|
f804bf80e5
|
Updated system timer logic from Bob Doiron
|
2014-04-30 14:46:26 -06:00 |
|
Gregory Nutt
|
91d94a0b03
|
SAM3/4: Enhanced timer/counter driver from Bob Doiron
|
2014-04-30 14:10:02 -06:00 |
|
Gregory Nutt
|
8be212ccc3
|
Nucleo-F401RE: Fix memory usage
|
2014-04-30 08:20:30 -06:00 |
|
Gregory Nutt
|
b252889270
|
ARMv7-M: Add FPU-related CFLAG settings for the CodeSourcery of Linux toolchain
|
2014-04-29 15:02:34 -06:00 |
|
Gregory Nutt
|
d43b12c1e1
|
Sourceforge patch #40. Fix some conditional logic in clock configuration. From Luciano Neri
|
2014-04-29 11:32:33 -06:00 |
|
Gregory Nutt
|
de7136e69b
|
STM32: More places where up_prioritize_irq is called when CONFIG_ARCH_IRQPRIO is not defined. Sourceforge ticket #26
|
2014-04-28 07:07:47 -06:00 |
|
Gregory Nutt
|
ae82fa65a6
|
Fix spelling, only one t in exiting
|
2014-04-27 15:49:38 -06:00 |
|
Gregory Nutt
|
fc1017d0de
|
Minor/cosmetic changes
|
2014-04-27 08:32:36 -06:00 |
|