Gregory Nutt
78bc1aa6bc
Argument of network device IOCTL should be unsigned long, just as will all other IOCTL methods.
2017-04-15 09:33:27 -06:00
Gregory Nutt
eee89102d8
networking: IPv4 change of last PR should also be applied to corresponding IPv6 logic.
2017-04-15 06:00:42 -06:00
ahb
6d18300f98
not a clean fix, but at least makes DHCP working with CONFIG_NETDEV_MULTINIC
2017-04-15 11:13:24 +02:00
Gregory Nutt
ad9321b7b7
Trivial changes from review of last PR
2017-04-13 06:16:03 -06:00
Thomas Keh
7e293b28ee
TUN driver: Implement TAP (OSI layer 2) mode.
...
Enable by setting the IFF_TAP flag instead of the IFF_TUN flag in ifr_flags.
2017-04-13 13:07:03 +02:00
Mark Schulte
35ca733108
pthread.h: Fix rwlock initializer
2017-04-08 12:34:08 -06:00
Gregory Nutt
27c65c3f22
6loWPAN: Add network IOCTL support to set the node address
2017-04-06 15:58:00 -06:00
Gregory Nutt
1a12682f23
6loWPAN: Fix some MTU-related craziness.
2017-03-30 17:18:18 -06:00
Gregory Nutt
5fb222180c
6loWPAN: IEEE802.15.4 MAC driver will need a special form of the network device structure to manage fragmentation of the large packet into frames.
2017-03-29 10:17:34 -06:00
Gregory Nutt
64933246c3
6loWPAN: Tie 6loWPAN send into common socket send logic.
2017-03-28 14:08:54 -06:00
Gregory Nutt
d9e32ee337
6loWPAN: More configurtion settings.
2017-03-28 11:16:28 -06:00
Gregory Nutt
aad82bcd9f
Cosmetic change
2017-03-13 18:01:21 -06:00
Gregory Nutt
888cff30dc
Fix some errors in the previous commit
2017-03-13 10:14:38 -06:00
Gregory Nutt
b808084e57
Move wireless IOCTLs from include/nuttx/net/ioctl to include/nuttx/wireless/wireless.h. Add some linux compatible structures to use with the IOCTL commands.
2017-03-13 09:51:31 -06:00
Gregory Nutt
430b52c977
Networking: Add registration support for integrated ieee80211 wireless drivers. Rename CONFIG_IEEE802154 to CONFIG_WIRELESS_IEEE8021514 following the convention of including the location of the configuration variable as a part of its name.
2017-03-12 12:50:41 -06:00
Gregory Nutt
7467329a98
Eliminate CONFIG_NO_NOINTS. Lots of files changed -> lots of testing needed.
2016-12-03 16:28:19 -06:00
Gregory Nutt
88a03ae3ec
Break out internal interface psock_ioctl()
2016-07-06 07:30:09 -06:00
Gregory Nutt
2a751068e6
Without lowsyslog() *llerr() is not useful. Eliminate and replace with *err().
2016-06-20 12:44:38 -06:00
Gregory Nutt
43eb04bb8f
Without lowsyslog() *llinfo() is not useful. Eliminate and replace with *info().
2016-06-20 11:59:15 -06:00
Gregory Nutt
f4fcdcdb4d
net/: Change some *err() message to *info() messages if what was a *dbg() message does not indicate and error condition.
2016-06-11 17:37:21 -06:00
Gregory Nutt
e99301d7c2
Rename *lldbg to *llerr
2016-06-11 14:55:27 -06:00
Gregory Nutt
fc3540cffe
Replace all occurrences of vdbg with vinfo
2016-06-11 11:59:51 -06:00
Gregory Nutt
fdddebbffd
net/: Finish IEEE802154->6LOWPAN renaming; remove PF_IEEE804154; Move 6LoWPAN menu to inside Internet Protocol Menu
2016-02-27 07:26:20 -06:00
Gregory Nutt
309beae2cd
Move drivers/ieee802154 to drivers/wireless/ieee802154; rename include/nuttx/net ieee802154 to 6lowpan.h
2016-02-26 15:03:16 -06:00
Gregory Nutt
2f28ca86c2
Clean up some naming; rename net/ieee802154 to net/6lowpan
2016-02-26 10:08:36 -06:00
Gregory Nutt
2c95fef501
Remove some empty code section comments
2016-02-26 07:35:55 -06:00
Gregory Nutt
8db55f6493
Back out most of previous commit
2016-02-26 06:45:37 -06:00
Gregory Nutt
0b441ff1f4
net/: Add basic IEEE 802.15-4 socket support
2016-02-25 14:01:22 -06:00
Gregory Nutt
e4e6181098
net/: IEEE 802.15-4 basic build build structure.
2016-02-25 10:43:51 -06:00
Gregory Nutt
bcbd8ee964
Networking: Cosmetic change
2016-02-24 19:02:51 -06:00
Gregory Nutt
68ee9bcaed
Refresh modules + plus minor clean-up from previous commits
2016-02-08 15:13:14 -06:00
Gregory Nutt
0af9a197ac
ARP: Add IOCTL commands to manage the ARP table
2016-02-08 11:17:22 -06:00
Gregory Nutt
eb8668b0f7
net/: Add procfs support for network device status
2015-11-27 16:39:14 -06:00
Gregory Nutt
6209c51206
net/: More clean-up of spacing/alignment issues
2015-10-08 15:10:04 -06:00
SaeHie Park
a268e0aeb9
Fix a typo from an earlier commit
2015-08-26 18:12:58 -06:00
Saehie ParK
e6dbd3d903
Networking: Fix network device name assignment logic for the case of the local loopback device. There is only one local loopback network device and it is unnumbered
2015-08-25 20:03:25 -06:00
Gregory Nutt
933d74e5c1
Networking: With these changes, I can ping the local loopback device from the simulator
2015-08-24 13:49:12 -06:00
Gregory Nutt
e21501c699
Merge remote-tracking branch 'origin/master' into localhost
2015-08-24 08:29:36 -06:00
Gregory Nutt
569ff602ea
Networking: Remove bogus references to PPP as a link layer protocol
2015-08-24 08:29:07 -06:00
Gregory Nutt
ea2fafb024
Add definitions to support a local loopback link layer
2015-08-24 08:25:08 -06:00
Gregory Nutt
fca919f3d2
Networking: Fix some compilation issues noted with network is build with CONFIG_BUILD_KERNEL
2015-07-05 11:18:56 -06:00
Gregory Nutt
342f5fe33d
Fix references to the no-longer-existent misc/ directory in comments, README files, and documentation
2015-06-28 08:08:57 -06:00
Gregory Nutt
b493dde4cf
TCP networking: In the TCP connection operation, it was trying to setup the network monitor BEFORE the socket was successfully connected. This, of course, has ALWAYS failed because the socket is not yet connected and the TCP state is not yet correct for a connected socket. However, because of other changes net_startmonitor(0 no returns a failure condition that causes worse problems when trying to connect. The fix is to move the logic that starts the network monitor to AFTER the socket has been successfully connected.
2015-05-31 11:35:28 -06:00
Gregory Nutt
33085cb309
Networking: The network device list was protected by a re-entrant semaphore. With the recent change to support network device callback, the network stack needs to access the network device list too. Some drivers, however, run the network stack from the interrupt level -- this is bad but a fact in the current state. Of course,those drivers are unable to take the semaphore and will assert.
...
The solution here is to eliminate the device devices semaphore altogether. This eliminates netdev_semtake() and netdev_semgive() and replaces them with net_lock() and net_unlock() which have larger scope as needed for this purpose.
2015-05-31 08:34:03 -06:00
Gregory Nutt
6687e156e6
Revamp last change. IFF_UP only required when allocating callback, not freeing.
2015-05-30 21:13:58 -06:00
Gregory Nutt
28b46c7bfa
To be valid, a network device must not only exist, but be in the UP state
2015-05-30 12:54:18 -06:00
Gregory Nutt
04a661a97c
TCP networking: Add support for network driver events
2015-05-30 09:12:27 -06:00
Gregory Nutt
ab50e9d04d
Networking: Get rid of g_ipv4_allzeroaddr and g_ipv4_alloneaddr. It is more efficient and more intuitive to use INADDR_ANY and INADDR_BROADCAST
2015-05-29 15:16:11 -06:00
Gregory Nutt
fa8b7c19b7
Forgot to add a file in the last commit
2015-05-29 11:03:02 -06:00
Gregory Nutt
f10fdf7ad4
Networking: Add a test to see a device pointer is still valid
2015-05-29 11:01:03 -06:00
