sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
46,641 Commits 1 Branch 0 Tags 291 MiB
7923ea3bef
Commit Graph

424 Commits

Author SHA1 Message Date
Huang Qi
8ce3337e85 arch/risc-v: Implement TLS support 
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
 2021-12-12 10:19:00 -06:00
Jari van Ewijk
2e47ef32cf GPIO driver: register all pintypes as generic /dev/gpioN 2021-12-09 23:55:12 -06:00
Huang Qi
3d4be7089c drivers/serial/uart_16550: Fix warning for format 
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
 2021-12-07 23:28:33 -06:00
Huang Qi
63ab2f4308 arch/risc-v: Introduce basic support for qemu rv32 
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
 2021-12-07 23:28:33 -06:00
Dong Heng
698f1f76ff risc-v/esp32c3: Refactor SPI Flash to support umask interrupt when R/W/E SPI Flash 
This can fix BLE assert when erase SPI Flash.
 2021-12-06 13:13:11 +09:00
Jukka Laitinen
ac5a228d89 boards/risc-v/mpfs: Enable CONFIG_SPI_CS_CONTROL 
Enable CS control via register write for the mpfs hwtest target

Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
 2021-11-24 06:50:32 -06:00
Xiang Xiao
ea0aadff1e boards/mpfs: Fix the icicle build break 
src/mpfs_emmcsd.c: In function 'mpfs_board_emmcsd_init':
Error: src/mpfs_emmcsd.c:72:40: error: 'SDIO_SLOTNO' undeclared (first use in this function)
   finfo("Initializing SDIO slot %d\n", SDIO_SLOTNO);
                                        ^~~~~~~~~~~
src/mpfs_emmcsd.c:72:40: note: each undeclared identifier is reported only once for each function it appears in
Error: src/mpfs_emmcsd.c:83:55: error: 'SDIO_MINOR' undeclared (first use in this function); did you mean 'SHRT_MIN'?
   finfo("Bind SDIO to the MMC/SD driver, minor=%d\n", SDIO_MINOR);

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
 2021-11-18 11:45:50 -06:00
Jani Paalijarvi
6dd4d5de15 risc-v/mpfs: Add support for Aries M100PFSMVP board 
- Add defconfig and board specific files
- Create mpfs/common for code which is shared between MPFS boards.
- Add support for GPIO driven EMMCSD mux.
- Move DDR Libero definitions from arch to boards.

Signed-off-by: Jani Paalijarvi <jani.paalijarvi@unikie.com>
 2021-11-18 10:59:44 -03:00
Dong Heng
779a29fea5 boards/Kconfig: set BOARD_ASSERT_RESET_VALUE default value to be 1 
The board code should separate the reset reason, so it had better
make "BOARD_ASSERT_RESET_VALUE" not be equal to "EXIT_SUCCESS".
 2021-11-16 10:44:54 -03:00
Dong Heng
92eedd93a7 risc-v/esp32c3: Fix reset triggering crash nested when crash 2021-11-16 10:44:54 -03:00
Abdelatif Guettouche
a01cb867ce esp32c3_rom.ld: Add some of the string.h functions to the linker 
script.

These functions are strongly declared and thus will be used instead of
any other implementation.  Furthermore, necessary Kconfig options are
selected to avoid building those function from NuttX's C library.

Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2021-11-13 11:54:42 -03:00
Xiang Xiao
0aeb132d15 board: Run ./tools/refresh.sh --silent all 
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
 2021-11-10 09:16:35 +01:00
Abdelatif Guettouche
044508c979 boards/esp32c3-devkit: Add a defconfig for the USB CDC Console. 
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2021-11-09 09:22:57 -03:00
Xiang Xiao
3847539f3d board: Run ./tools/refresh.sh --silent all 
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
 2021-11-07 13:19:15 +01:00
ChenWen
440787c0c1 risc-v/esp32c3: Fix Wi-Fi & BLE coexist issue 
1. Wi-Fi and BLE use common PHY functions.
  2. Fix Wi-Fi & BLE coexist adapter error.
  3. Update esp-wireless-drivers-3rdparty, provide coexist protection for connection.
 2021-11-04 11:02:05 -03:00
Eero Nurkkala
8e43f39141 mpfs: cache: provide L1/L2 cache enablers 
E51 may configure the L1 and L2 caches. Once configured,
no reconfiguration is possible after hardware reset is
issued.

L2 is 16-way set associative with write-back policy. The
size 2 MB, from which 1 MB is utilized with the values
provided here. That's a total of 8 ways. The rest of the
L2 is left out for the bootloader usage.

mpfs_enable_cache() first checks the bootloader usage
doesn't overlap with the cache itself, thus providing a
set of functional values.

Signed-off-by: Eero Nurkkala <eero.nurkkala@offcode.fi>
 2021-11-04 11:00:55 -03:00
Jani Paalijarvi
a16a9f80e2 mpfs: i2c: Add support for adaptive I2C bus frequency 
Select the closest possible frequency which is smaller
than or equal to requested in I2C msg
 2021-11-02 04:10:08 -05:00
Abdelatif Guettouche
860370284e esp32c3_dma: Remove the DMA test included in the driver along with its 
defconfig.

Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2021-11-01 13:49:59 -05:00
Gustavo Henrique Nihei
c9d784a238 boards/esp32c3-devkit: Port SPI Flash FS fixes from ESP32 
This commit brings 3 fixes/improvements applied to the Kconfig options
for SPI Flash file system support on board bring-up:
- (925e8f9) Optionally mount SPI Flash MTD on bring-up
- (f74c6f7) Transform SPI Flash FS deps into reverse deps
- (9056cab) Select MTD_SMART if SmartFS is selected for SPI Flash MTD

Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
 2021-10-25 21:45:20 -05:00
Gustavo Henrique Nihei
18f785c7b7 risc-v/esp32c3: Removed unused definitions 
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
 2021-10-25 21:45:20 -05:00
Gustavo Henrique Nihei
06bb85d8a5 risc-v/esp32c3: Rename MTD-related configs to become more intuitive 
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
 2021-10-25 21:45:20 -05:00
Gustavo Henrique Nihei
211f899b62 risc-v/esp32c3: Refactor and reorganize Partition Table related configs 
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
 2021-10-25 16:34:58 -03:00
Eero Nurkkala
c7cf9fd9d2 mpfs: board Make.defs: add bootloader linker option 
Use the linker script used with bootloaders that start
from the eNVM.

Signed-off-by: Eero Nurkkala <eero.nurkkala@offcode.fi>
 2021-10-21 22:40:26 -05:00
Eero Nurkkala
ad76b6733c mpfs: boards: add ld-envm.script 
This configuration is used when flashing nuttx as a bootloader
in the eNVM region.

Signed-off-by: Eero Nurkkala <eero.nurkkala@offcode.fi>
 2021-10-21 22:40:26 -05:00
Eero Nurkkala
3b330089d5 mpfs: ddr: add DDR training 
This adds DDR training. The training has a small chance of failing,
and then the training is restarted.

DDR training cannot be done meaningfully while the software is
in DDR. If the system is intended to run from eNVM, like a
bootloader, the linker script should be tuned to utilize the envm
region as follows:

  envm (rx)   : ORIGIN = 0x20220100, LENGTH = 128K - 256
  l2lim (rwx) : ORIGIN = 0x08000000, LENGTH = 1024k

256 bytes are reserved for the system; The fixed block may be
installed from the 'hart-software-services' -repository:
https://github.com/polarfire-soc/hart-software-services.git

For example, the 256-byte image: hss-envm-wrapper-bm1-dummySbic.bin
may be prepended on the nuttx bootloader image in the following
manner:

 cat hss-envm-wrapper-bm1-dummySbic.bin > nuttx_bootloader.bin
 cat nuttx.bin >> nuttx_bootloader.bin
 riscv64-unknown-elf-objcopy -I binary -O ihex --change-section-lma
  *+0x20220000 nuttx_bootloader.bin flashable_image.hex

This provides an image 'flashable_image.hex' that may be flashed on
the eNVM region via Microsemi Libero tool.

Signed-off-by: Eero Nurkkala <eero.nurkkala@offcode.fi>
 2021-10-21 22:40:26 -05:00
Abdelatif Guettouche
9235d6605b boards/esp32&esp32c3: Remove crypto accelerators' defconfigs. 
Since the tests were removed from the drivers, there is no need for
these defconfigs anymore.

Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2021-10-19 18:41:57 -03:00
Abdelatif Guettouche
55e8b17974 boards/risc-v/esp32c3: Remove the flash encryption test. 
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2021-10-19 18:41:57 -03:00
Abdelatif Guettouche
e424241d09 arch/risc-v/esp32c3: Remove the bignum test from the driver. 
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2021-10-19 18:41:57 -03:00
Abdelatif Guettouche
91cb9dafaf arch/risc-v/esp32c3: Remove the RSA test from the driver. 
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2021-10-19 18:41:57 -03:00
Abdelatif Guettouche
652d77efd2 arch/risc-v/esp32c3: Remove the SHA test from the driver. 
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2021-10-19 18:41:57 -03:00
Abdelatif Guettouche
5d1c01aea7 arch/risc-v/esp32c3: Remove the AES test from the driver. 
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2021-10-19 18:41:57 -03:00
Matheus Castello
5c15fe6ec1 boards: k210: Add initial gpio user space support 
Signed-off-by: Matheus Castello <matheus@castello.eng.br>
 2021-10-17 17:29:59 +09:00
Matheus Castello
1bc3ab513d boards: risc-v: k210: Fix -march and -mabi 
-march=rv64gc -mabi=lp64 does not resolve lib paths for
riscv64-unknown-elf-gcc resulting in lib not found errors.
Changing it to -march=rv64imafc -mabi=lp64f that is the default
used in Sipeed repositories.

Signed-off-by: Matheus Castello <matheus@castello.eng.br>
 2021-10-14 15:50:20 +09:00
jsun
c58fddb915 Open ble controller adaptation code 
N/A

Signed-off-by: jsun <jsun@bouffalolab.com>
 2021-10-08 02:30:27 -07:00
Gustavo Henrique Nihei
0a1b3c1331 risc-v/esp32c3-devkit: Add BLE defconfig 
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
 2021-10-05 08:45:40 -03:00
Gustavo Henrique Nihei
47e804b167 risc-v/esp32c3: Make BLE adapter code compliant to nxstyle 
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
 2021-10-05 08:45:40 -03:00
Abdelatif Guettouche
ee20d0f545 esp32c3_rom.ld: Add a strong declaration to some libgcc function that 
are ROM resident.

Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2021-10-01 10:09:04 -03:00
Gustavo Henrique Nihei
548f2b6eab boards/esp32c3-devkit: Add mcuboot_confirm defconfig 
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
 2021-09-27 18:22:29 -07:00
Gustavo Henrique Nihei
3c63cb522c risc-v/esp32c3: Enable booting from MCUboot bootloader 
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
 2021-09-27 18:22:29 -07:00
Alan C. Assis
f9b322567c boards/esp32c3: Remove "return ret" from bringup 2021-09-21 10:34:55 -03:00
Alan C. Assis
63a17f5cdd esp32c3-devkit: Add board profile to use LVGL on GC9A01 display 2021-09-18 20:58:30 -05:00
Janne Rosberg
e022ea1283 mpfs/icicle/configs/hwtest: enable SD card 2021-09-18 12:18:09 -03:00
Eero Nurkkala
812f504c16 mpfs: emmcsd: add Kconfig/Makefile and board files 
Add necessary Kconfig, Make.defs, Makefile and board
file changes.

Signed-off-by: Eero Nurkkala <eero.nurkkala@offcode.fi>
 2021-09-18 12:18:09 -03:00
Peter Bee
a7a3d8bec7 boards/esp32c3: add ESP32C3 LCD drivers 
Add board driver for ST7735, ST7789 and GC9A01

Signed-off-by: Peter Bee <bijunda1@xiaomi.com>
 2021-09-17 09:35:10 -03:00
Alan C. Assis
099e9fb4f7 boards: Remove -nostartfiles -nodefaultlibs from LDFLAGS 2021-09-13 08:58:25 +08:00
Janne Rosberg
d361a9ded8 boards/icicle: add hwtest config 
This config enables all peripherals and some tools.
Also useful for CI build check.
 2021-09-11 23:33:01 +08:00
Sara Souza
acf18bd82d risc-v/esp32-c3: refactor the Wi-Fi board logic. 
This commit moves the Wi-Fi initialization to
Wi-Fi specific file and to spiflash initialization.

It also reserves one partition for Wi-Fi use and for general use,
and makes it possible to me mounted by several FS.
 2021-09-09 20:14:04 +08:00
Sara Souza
11068fad1b risc-v/esp32-c3: Enable the allocation of multiple MTD SPI Flash partitions 2021-09-09 20:14:04 +08:00
Gustavo Henrique Nihei
310a2dd0e4 tools/esp32c3: Create option for merging all binaries into a single file 
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
 2021-09-08 12:16:52 +02:00
Alin Jerpelea
9d870e1502 defconfig: allow use of BSD components 
several configs are used for testing and need the BSD components

more information about license can be found here
https://www.apache.org/legal/resolved.html#category-a

Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
 2021-09-02 09:00:43 -03:00
Alin Jerpelea
2ab9e7fef0 Revert "esp32: remove FS_SPIFFS from defconfigs" 
This reverts commit 35a004bdd0.
 2021-09-02 09:00:43 -03:00
Alin Jerpelea
35a004bdd0 esp32: remove FS_SPIFFS from defconfigs 
FS_SPIFFS uses BSD license and should not be enabled by default

Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
 2021-08-30 22:39:04 +08:00
Xiang Xiao
e3ab1179fa board: Enable CONFIG_LIBCXXABI when CONFIG_LIBCXX is enabled 
to avoid link libsupc++.a which is provided by toolchain

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
 2021-08-28 17:13:43 -03:00
Alin Jerpelea
a43650648e risc-V: remove ble defconfigs 
By default the components with BSD license should be disabled

NOTE:
the BLUETOOTH components was enabled in a non bluetooth config

Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
 2021-08-27 02:56:22 +08:00
Antti Vähälummukka
6eb73ced51 arch/risc-v/src/mpfs: Add CorePWM driver 
Add a driver for CorePWM block, which can be instantiated on PolarFire SOC FPGA

This supports 2 CorePWM blocks on the FPGA. One CorePWM block provides 8 PWM output signals
 2021-08-20 08:56:30 -03:00
Xiang Xiao
b12f588140 Rename CONFIG_LIB_BOARDCTL to CONFIG_BOARDCTL 
since boardctl isn't a libc feature

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
 2021-08-06 13:58:26 +02:00
Xiang Xiao
5025fbef8d Rename LIB_ to LIBC_ for all libc Kconfig 
follow other libc component naming convention

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
 2021-08-05 19:45:24 +02:00
Xiang Xiao
007adc7736 Replace all __attribute__((section(x)) with locate_data(x) 
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
 2021-07-29 21:55:21 -03:00
jordi
b87333bae8 Kconfig: remove empty help sections 
To avoid the setconfig warning: "has 'help' but empty help text"
 2021-07-23 02:32:19 -07:00
Alan C. Assis
b9ec0063bc Remove duplicated Documentation of the bl602evb 2021-07-19 06:26:52 -07:00
Sara Souza
81e881c8c0 risc-v/esp32-c3: Makes output readable and rmv unnecessary var. 2021-07-16 19:53:04 -03:00
Virus.V
063e1d6b74 risc-v/bl602: update wifi firmware and some fixup. 
1. Added check for repeated connection wifi operations.
2. Invoke the carrier on/off operation in the wrong place.
3. The RTC initialization time is incorrect.
4. Reserve 32K I-Cache space in the linker script.
5. Increase the size of the wifi firmware receiving buffer.

Signed-off-by: Virus.V <virusv@live.com>
 2021-07-13 05:12:12 -07:00
Virus.V
4e950c3e30 risc-v/bl602: add boardctl support 
Signed-off-by: Virus.V <virusv@live.com>
Change-Id: I74280f5cb801e923fb987009ae007aa02677b14d
 2021-07-13 02:50:40 -07:00
Dong Heng
f5eaf82c93 risc-v/esp32c3: Use onexit to free thread private semaphore 2021-07-12 09:38:21 -03:00
Jiuzhu Dong
85470176e7 sched/task: delete CONFIG_MAX_TASKS limit 
Change-Id: I583015a95dbcebd352f81ecb3104ffdbd646a9ec
Signed-off-by: Jiuzhu Dong <dongjiuzhu1@xiaomi.com>
 2021-07-11 19:42:30 -07:00
Dong Heng
d83caef2df boards/esp32c3-devkit: Support mounting SPI Flash MTD to littleFS 2021-07-08 09:01:43 -03:00
Dong Heng
2d6c1044fb boards/esp32c3-devkit: Fix compiling error 
Add UID defconfig to check compiling error.
 2021-07-07 02:49:52 -05:00
Xiang Xiao
f0961f43a6 boards/esp32c3-devkit: Add etctmp to .gitignore 
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
 2021-07-06 09:49:43 -05:00
chenwen
97b8e90d79 boards/esp32c3: Add romfs configuration 2021-07-06 05:25:14 -05:00
Dong Heng
475becac37 risc-v/esp32c3: Add board_ioctl and board_uniqueid 2021-07-05 23:12:17 -05:00
Nathan Hartman
ce20211357 Fix various typos in comments and documentation 
Fix typos in these files:
    * Documentation/components/drivers/character/foc.rst
    * Documentation/guides/cpp_cmake.rst
    * Kconfig
    * arch/arm/src/imxrt/imxrt_lpspi.c
    * arch/arm/src/kinetis/kinetis_spi.c
    * arch/arm/src/kl/kl_spi.c
    * arch/arm/src/lpc31xx/lpc31_spi.c
    * arch/arm/src/nrf52/nrf52_radio.h
    * arch/arm/src/s32k1xx/s32k1xx_lpspi.c
    * arch/arm/src/stm32/Kconfig
    * arch/arm/src/stm32/stm32_adc.c
    * arch/arm/src/stm32/stm32_foc.c
    * arch/arm/src/stm32/stm32_foc.h
    * arch/arm/src/stm32/stm32_pwm.c
    * arch/arm/src/stm32/stm32_spi.c
    * arch/arm/src/stm32f0l0g0/stm32_spi.c
    * arch/arm/src/stm32f7/Kconfig
    * arch/arm/src/stm32f7/stm32_spi.c
    * arch/arm/src/stm32h7/Kconfig
    * arch/arm/src/stm32h7/stm32_allocateheap.c
    * arch/arm/src/stm32h7/stm32_fmc.c
    * arch/arm/src/stm32h7/stm32_fmc.h
    * arch/arm/src/stm32h7/stm32_pwm.c
    * arch/arm/src/stm32h7/stm32_qspi.c
    * arch/arm/src/stm32h7/stm32_spi.c
    * arch/arm/src/stm32l4/stm32l4_pwm.c
    * arch/arm/src/stm32l4/stm32l4_spi.c
    * arch/arm/src/stm32l5/Kconfig
    * arch/arm/src/stm32l5/stm32l5_spi.c
    * arch/renesas/src/rx65n/rx65n_dtc.c
    * arch/renesas/src/rx65n/rx65n_usbdev.c
    * arch/risc-v/src/rv32m1/rv32m1_serial.c
    * boards/arm/stm32/b-g431b-esc1/src/stm32_foc.c
    * boards/arm/stm32/nucleo-f103rb/src/stm32_foc_ihm07m1.c
    * boards/arm/stm32/nucleo-f302r8/src/stm32_foc_ihm07m1.c
    * boards/arm/stm32h7/nucleo-h743zi2/README.txt
    * boards/risc-v/rv32m1/rv32m1-vega/README.txt
    * boards/sim/sim/sim/scripts/Make.defs
    * drivers/1wire/1wire.c
    * drivers/1wire/1wire_internal.h
    * drivers/lcd/Kconfig
    * drivers/syslog/ramlog.c
    * fs/fat/Kconfig
    * libs/libc/debug/Kconfig
    * libs/libc/machine/Kconfig
    * libs/libc/stdio/lib_libvsprintf.c
    * libs/libc/stdlib/lib_div.c
    * libs/libc/stdlib/lib_ldiv.c
    * libs/libc/stdlib/lib_lldiv.c
    * libs/libdsp/lib_observer.c
 2021-07-04 11:23:26 -05:00
Xiang Xiao
1b5341f6c0 boards/bl602: Fix uart_nx.c:419: undefined reference to `uart_bth4_register' 
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
 2021-07-01 05:01:21 -05:00
xiewenxiang
5fd3eca9c9 riscv/esp32c3: Support BLE sleep mode 2021-06-28 23:14:30 -05:00
xiewenxiang
145d917587 riscv/esp32c3: Add Wi-Fi and BLE coexist 2021-06-28 23:14:30 -05:00
xiewenxiang
8b96edc3a5 riscv/esp32c3: Add esp32c3 BLE driver 2021-06-28 23:14:30 -05:00
Virus.V
8452c571ec risc-v/bl602: BLE firmware adapts to the new framework 
Signed-off-by: Virus.V <virusv@live.com>
 2021-06-28 07:03:04 -05:00
Virus.V
cd50650583 risc-v/bl602: Support AP and STA as independent network interface device 
Signed-off-by: Virus.V <virusv@live.com>
 2021-06-28 07:03:04 -05:00
Abdelatif Guettouche
11ed8575cd boards/rsic-v/esp32c3: Use the common gnu-elf.ld file from binfmt/libelf 
instead of keeping the same file for each board.

Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2021-06-24 08:04:14 -05:00
Abdelatif Guettouche
eb403bc996 boards/riscv/esp32c3: Rename the iram_0_2 segment to irom_0_0 to avoid 
confusions.

Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2021-06-24 07:00:51 -05:00
Abdelatif Guettouche
60da4317b9 arch/risc-v/esp32c3: Use the same naming for the RTC heap as ESP32 for 
consistency.

Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2021-06-23 08:37:01 +09:00
Liu Han
2dd081ed7d risc-v/esp32c3: Support ESP32-C3 SHA accelerator 2021-06-21 02:41:53 -05:00
Abdelatif Guettouche
af5e0c620f Rename MODULE_TEXT to TEXT_HEAP as the latter is more generic. 
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2021-06-18 07:14:17 -05:00
Abdelatif Guettouche
f54804bafc arch/risc-v/esp32c3: Create a separate heap for the RTC memory. 
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2021-06-18 00:53:42 -05:00
Abdelatif Guettouche
965a39a76d boards/risc-v/esp32c3-devkit: Include "config.h" in esp32c3_boot.c 
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2021-06-18 00:53:42 -05:00
Abdelatif Guettouche
bd0e03fecf boards/risc-v/esp32c3-devkit/esp32c3.ld: Add the RTC BSS section for 
completeness.

Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2021-06-18 00:53:42 -05:00
Abdelatif Guettouche
61f7bc6e2a boards/risc-v/esp32c3-devkit/scripts: Drop the "iram" in the name of the RTC 
section.

The RTC region is accessed by both I and D buses.  The old name of
`rtc_iram_seg` is a bit confusing.

Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2021-06-18 00:53:42 -05:00
Liu Han
04c805207a risc-v/esp32c3: Support ESP32-C3 efuse 2021-06-16 09:35:09 -03:00
Liu Han
8eaaf6d462 risc-v/esp32c3: Support ESP32-C3 RSA accelerator 2021-06-14 15:03:11 -03:00
Eero Nurkkala
1bce864ef7 mpfs: add i2c driver 
This adds mpfs i2c driver.

Signed-off-by: Eero Nurkkala <eero.nurkkala@offcode.fi>
 2021-06-11 21:03:42 -05:00
Eero Nurkkala
fad34e04c4 mpfs: add spi driver 
This adds the SPI driver for the MPFS Icicle board.

Signed-off-by: Eero Nurkkala <eero.nurkkala@offcode.fi>
 2021-06-11 09:10:03 -05:00
Chen Wen
dbf9c87a42 risc-v/esp32c3: Support ESP32-C3 RTC driver 2021-06-10 09:33:04 -03:00
Xiang Xiao
5b2a17b892 Include assert.h in necessary place 
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
 2021-06-08 13:06:08 -07:00
unixjet
68f19a6290 risc-v/rv32m1: Basic port to rv32m1 ri5cy 2021-06-05 17:25:57 -03:00
Gustavo Henrique Nihei
0b3c2c7603 spi: Refactor SPI Slave interface prefix to sync with I2C Slave 2021-06-05 04:50:34 -07:00
Abdelatif Guettouche
f00deae9ac boards/esp32c3-devkit: Add a defconfig to test the shared library 
example.

Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2021-06-04 18:08:36 -03:00
Abdelatif Guettouche
dd4962b2f8 boards/esp32c3-devkit: Add the necessary flags for loadable modules and 
a module defconfig to test the "module" example.

Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2021-06-04 18:08:36 -03:00
Abdelatif Guettouche
3b7ae20843 boards/risc-v/esp32c3-devkit: Add an ELF defconfig and the necessary ELF 
flags and linker script to support that.

Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2021-06-04 18:08:36 -03:00
Xiang Xiao
2e54df0f35 Don't include assert.h from public header file 
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
 2021-06-03 08:36:03 -07:00
YAMAMOTO Takashi
c20ed229b1 refresh configs 2021-06-03 10:05:33 -05:00
Xiang Xiao
d7f96003cf Don't include debug.h from public header file 
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
 2021-06-01 06:42:02 +09:00
Gustavo Henrique Nihei
8a41d849df drivers/spi: Change prefix to a more intuitive "spislave" 2021-05-31 07:54:08 -07:00
Gustavo Henrique Nihei
8914646c27 board/esp32c3-devkit: Add support for SPI Slave chardev driver 2021-05-31 12:54:15 +01:00
Virus.V
c6317650f9 risc-v/bl602: Add RTC support 2021-05-26 20:03:19 -03:00
Dong Heng
73dcbac09d riscv/esp32c3: Add ESP32-C3 AES driver 2021-05-25 11:02:59 -03:00
Govind Singh
1e4490f127 boards: maix-bit: Update README.txt with updated clone path 
Update apps clone path to avoid below error seen due to
expected relative path.

tools/Makefile.unix:329: recipe for target 'dirlinks' failed
make: *** [dirlinks] Error 2
ERROR: failed to refresh

Signed-off-by: Govind Singh <govind.sk85@gmail.com>
 2021-05-25 01:37:28 -05:00
Janne Rosberg
d6205642ab add support for PolarFire SoC and icicle board 
Co-authored-by: Eero Nurkkala <eero.nurkkala@offcode.fi>
 2021-05-24 22:55:44 -05:00
Dong Heng
76df958e34 riscv/esp32c3: Support SPI Flash encryption read/write 2021-05-23 08:37:25 -03:00
Huang Qi
f4a0b7aedd libc: Call pthread_exit in user-space by up_pthread_exit 
Drop to user-space in kernel/protected build with up_pthread_exit,
now all pthread_cleanup functions executed in user mode.

* A new syscall SYS_pthread_exit added
* A new tcb flag TCB_FLAG_CANCEL_DOING added
* up_pthread_exit implemented for riscv/arm arch

Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
 2021-05-21 22:46:52 -06:00
Huang Qi
103925b2b7 boards/risc-v/c906: Remove unneeded pthread_start 
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
 2021-05-21 22:46:52 -06:00
Gregory Nutt
bb9b58bdde libc: Move pthread_create to user space 
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
Change-Id: I5c447d94077debc79158686935f288e4c8e51e01
 2021-05-21 22:46:52 -06:00
chenwen
9a99d813fa risc-v/esp32c3: Support ESP32-C3 auto-sleep 2021-05-19 07:00:40 -03:00
Dong Heng
f12de4f7d9 riscv/esp32c3: Add ESP32-C3 ADC driver 2021-05-18 09:20:46 -03:00
Dong Heng
beed26b6bf riscv/esp32c3: Add ESP32-C3 LEDC(PWM) driver 2021-05-15 08:38:37 -03:00
Xiang Xiao
11ef8a3201 board: Enable CONFIG_BOARDCTL_ROMDISK 
to fix build break by commit 3156aa7532

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
 2021-05-13 10:44:16 -05:00
chenwen
16667930cb risc-v/esp32c3: Support ESP32-C3 PM standby and sleep 2021-05-12 10:15:06 -03:00
Abdelatif Guettouche
df7bd125f8 boards/risc-v/esp32c3: Convert the README.txt to the new Documentation. 
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2021-05-12 04:40:41 -07:00
Dong Heng
bd8e37bb4b risc-v/esp32c3: Add ESP32-C3 (G)DMA driver and testing 2021-05-07 16:46:41 -03:00
Gustavo Henrique Nihei
4f08f43a6d boards/esp32c3-devkit: Increase MAX_TASKS to 16 on nsh/ostest configs 
This fixes the barrier test from ostest application
 2021-04-30 17:55:30 +01:00
Dong Heng
fcd5648bca riscv/esp32c3: Fix SPI Flash driver internal chip data address error 
"g_rom_flashchip" is not in fixed address between all ESP32-C3's different versions.
 2021-04-28 09:58:16 -05:00
Gustavo Henrique Nihei
66a15a6f83 risc-v/esp32c3: Fix wrong references to ESP32 2021-04-28 15:41:30 +01:00
Gustavo Henrique Nihei
ba23526e39 boards/esp32c3-devkit: Allocate .noinit in a dedicated section 
Previously it was being allocated into .bss section after the _ebss
address. Although functional, this is not intuitive.
 2021-04-28 15:40:49 +01:00
Gustavo Henrique Nihei
2fd98c99d7 boards/esp32c3-devkit: Add SPI character device driver 2021-04-26 20:50:32 -03:00
Gustavo Henrique Nihei
e0f514171b boards/esp32c3-devkit: Add board-specific SPI functions 2021-04-26 20:50:32 -03:00
Masayuki Ishikawa
b17ee3fe29 boards: maix-bit: Add smp2 configuration 
Summary:
- This commit adds maix-bit:smp2 configuration to test different
  sched parameters such as CONFIG_SCHED_CHILD_STATUS=y

Impact:
- None

Testing:
- Tested with ostest

Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
 2021-04-23 03:25:14 -05:00
Sara Souza
7a80cbf93f risc-v/esp32-c3: Adds oneshot timer driver. 2021-04-22 09:13:58 +01:00
Abdelatif Guettouche
f43f066018 boards: Update the iperf configs. 
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2021-04-21 13:44:18 -05:00
Masayuki Ishikawa
1e6fd0871f boards: maix-bit: Add _default_stack_limit to the linker script 
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
 2021-04-19 01:09:22 -05:00
Masayuki Ishikawa
17149fbb38 boards: hifive1-revb: Add _default_stack_limit to the linker scripts 
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
 2021-04-19 01:05:40 -05:00
hotislandn
60b56121b6 boards:rv64:c906:add sotest demo for smartl-c906. 
Signed-off-by: hotislandn <hotislandn@hotmail.com>
 2021-04-17 19:07:13 +01:00
hotislandn
d0c31f09e7 arch:rv64:c906:add configuration for kernel module test. 
Signed-off-by: hotislandn <hotislandn@hotmail.com>
 2021-04-15 11:04:51 -05:00
Abdelatif Guettouche
ad43d9e8f3 boards/esp32c3-devkit: Add an OSTest defconfig. 
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2021-04-13 12:07:56 -03:00
Dong Heng
31854ca135 riscv/esp32c3: Fix heap end address 2021-04-12 01:36:11 -05:00
Masayuki Ishikawa
f2a57b612a boards: maix-bit: Add knsh_smp 
Summary:
- This commit adds knsh_smp for maix-bit

Impact:
- None

Testing:
- Tested with QEMU

Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
 2021-04-09 03:12:50 -05:00
Gustavo Henrique Nihei
2efae6928d drivers/input: Rename BUTTONS configs to INPUT_BUTTONS 2021-04-08 14:41:22 -03:00
Xiang Xiao
5f3a98b5a8 libc/assert: Reference the expression in all case 
to avoid the warning "defined but not used"

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I55b7c092d0f2e5882fc1784987657c10cdf2d90b
 2021-04-03 21:00:41 +01:00
Alan Carvalho de Assis
b4129f8989 esp32c3-devkit: Add random example board config 2021-04-03 07:20:03 -05:00
Alin Jerpelea
3d96d5f2ce arch: esp32: Mixed Case identifier fix 
Fix Mixed Case Identifier reported by nxstyle

Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
 2021-04-01 12:13:12 -05:00
chenwen
91eb70b5ef risc-v/esp32c3: Support ESP32-C3 wireless ioctl cmd 2021-03-30 12:29:11 -05:00
Virus.V
f9997bdfb3 risc-v/bl602: fix _heap_start not word align 2021-03-30 01:11:09 -05:00
Brennan Ashton
0a3b20e546 syslog: Drop extra carriage return from syslog calls 2021-03-28 21:24:00 -05:00
hotislandn
6aa86b469c arch:rv64:c906:add PMP, change mem map for protect build. 
Signed-off-by: hotislandn <hotislandn@hotmail.com>
 2021-03-28 09:02:48 -05:00
Alan Carvalho de Assis
76c02afc48 esp32c3-devkit: Add board support for SPIFlash 
Co-authored-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2021-03-26 09:19:25 +01:00
Alan Carvalho de Assis
4f8ff0765f risc-v/esp32c3: Add SPIFlash support 
Co-Authored-By: Dong Heng <dongheng@espressif.com>
Co-authored-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
Co-authored-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2021-03-26 09:19:25 +01:00
Virus.V
7c80826c21 risc-v/bl602: Add wifi and ble support 
tcpip ok

update wifi demo configuration

fix tcpip input cause misalign fault

change some api definetions in nuttx

fix wifi manager strlen copy without suffix null character

fix 602 network buf allocation issue

wifi scan works

[ble] Add controller code

[BLE] Add nuttx adapt code for blecontroller .

[BLE] modified include file path, to fix cflag is too long.

[ble]Test ble peripheral pass, save code.

[ble] Organize the code

[BLE] Add blecontroller config for nuttx

[BLE] Add config for ble example

fix tcp lost packet when rx

support wpa3.

Copy default config from wifi default config. Create ble for local test and ble tester for autopts.

Add config for local test.

Add pts teset config for host test

Add config for mesh test

Create task to init blecontroller

Delete blecontroller rx thread.

using idle task to receive hci command from host

Set ble device name to /dev/ble, and fix code.

1.fix a ke schedule risk 2. CFG_HOST is enabled only in the case that CONFIG_BLE_HOST_DISABLE is not enabled, by lanlan

rm _sp_main stack.

change h/l workq_stack_size 6K

change l workq_stack_size 3K.

[ble] delete file_detach

color idle stack.

clear bl602 netdev code

SCAN is sorted according to RSSI

enlarge nsh command line buffer

fixup stack overflow check checkfail when startup

arch/risc-v/BL602:fix reboot cause crash

reboot default use romapi.

riscv/bl602:netdev support defered input, remove wifi_tx function

risc-v/bl602:fix sem_timedwait usage error in bl_cmds

risc-v/bl602:fix memory access out of bounds when copy ssid

remove ble and wifi source, download when build

add bl602 blob gitignore

risc-v/bl602:remove ble-pts defconfig

Fix some typos in NuttX style naming

Fix the replacement of tab to space

fix wlan interface down still receive packet

fix wapi crash, rx when ifdown,and ble_hci_rx_do

change system reset to rom dirver

change ble hci interval to 50ms

NuttX support wifi enable/disable log via KConfig

support country code configuration in Kconfig

fix ap tx not work
 2021-03-25 01:38:45 -07:00
Masayuki Ishikawa
9cce09e58a boards: Remove SCHED_INSTRUMENTATION from all SMP related configs 
Summary:
- This commit removes SCHED_INSTRUMENTATION which has been used
  to debug NuttX SMP kernel

Impact:
- None

Testing:
- Tested with ostest

Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
 2021-03-22 19:47:56 -07:00
Abdelatif Guettouche
fb0fd36a5c arch/risc-v: Internal functions should be prefixed by "riscv_" instead 
of "up_"

Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2021-03-20 13:02:54 -03:00
Alin Jerpelea
6f14299dd0 boards: nxstyle fixes 
nxstyle fixes to pass the CI check

Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
 2021-03-18 22:58:27 -07:00
Jiuzhu Dong
59eb4fa8d6 fs: delete NFILE_DESCRIPTORS for allocating dynamically 
Change-Id: Id06d215063796d222b9792d25ab2d6742167729f
Signed-off-by: Jiuzhu Dong <dongjiuzhu1@xiaomi.com>
 2021-03-17 06:46:42 -07:00
Gustavo Henrique Nihei
a93d538f3b boards/esp32c3-devkit: Use nx_mount to avoid overriding errno 2021-03-16 19:49:21 -07:00
hotislandn
fb7a5b86ca arch:rv64:c906:demo protect build without PMP. 
Signed-off-by: hotislandn <hotislandn@hotmail.com>
 2021-03-16 11:43:10 -03:00
Dong Heng
458caf2732 riscv/esp32c3: Add ESP32-C3 WLAN netcard driver 2021-03-16 10:42:32 -03:00
Masayuki Ishikawa
d90f868b60 boards: risc-v: Author Masayuki Ishikawa: Update license to Apache 
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
 2021-03-12 16:15:44 +08:00
Gustavo Henrique Nihei
8517168336 boards/esp32c3-devkit: Add support for BMP180 sensor 2021-03-11 19:32:03 -03:00
Gustavo Henrique Nihei
4099c1d75d boards/esp32c3: Create configuration for I2C testing 2021-03-11 19:32:03 -03:00
Gustavo Henrique Nihei
abab83b216 boards/esp32c3-devkit: Add support for I2C on board bringup 2021-03-11 19:32:03 -03:00
Xiang Xiao
c047c1412f Remove all gap8(risc-v) arch and board source code 
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
 2021-03-11 10:51:11 -08:00
Xiang Xiao
c54d617f2c Remove nr5m100(risc-v) arch and board source code 
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
 2021-03-11 10:51:11 -08:00
hotislandn
f71c5e5324 board:rv64:c906:support ELF apps. 
Signed-off-by: hotislandn <hotislandn@hotmail.com>
 2021-03-11 14:37:30 -03:00
hotislandn
d898bc445c arch:rv64:c906:enable DP FPU support. 
Signed-off-by: hotislandn <hotislandn@hotmail.com>
 2021-03-11 10:34:47 +08:00
hotislandn
5e50938726 arch:riscv64:basic porting for C906. 
Signed-off-by: hotislandn <hotislandn@hotmail.com>
 2021-03-10 19:23:24 +08:00
Gustavo Henrique Nihei
330eff36d7 sourcefiles: Fix relative path in file header 2021-03-09 23:18:28 +08:00
Gustavo Henrique Nihei
13535d8725 linkerfiles: Fix relative path in file header 2021-03-09 23:18:28 +08:00
Gustavo Henrique Nihei
47cb41c92f makefiles: Fix relative path in file header 2021-03-09 23:18:28 +08:00
Sara Souza
85a93be5d7 risc-v/esp32-c3: Adds timer driver 2021-03-09 11:16:53 -03:00
Alin Jerpelea
0a797f1e8b boards: Makefile: Author Gregory Nutt: update licenses to Apache 
Gregory Nutt has submitted the SGA and we can migrate the licenses
 to Apache.

Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
 2021-03-05 04:08:55 -08:00
Xiang Xiao
9473434587 Ensure the kernel component don't call userspace API 
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
 2021-03-01 09:23:09 +09:00
Gustavo Henrique Nihei
7fe096c65e risc-v: Fix typos reported by codespell 2021-02-25 16:25:47 +00:00
Abdelatif Guettouche
fb68a4b777 esp32c3: Add system reset. 
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2021-02-23 18:13:02 -08:00
Dong Heng
7c9c9907ef boards/esp32c3: Add tmpfs mounting when bringing up 2021-02-23 00:41:08 -08:00
Gustavo Henrique Nihei
291a5755cc risc-v/esp32c3: Add support for MWDT0 and MWDT1 2021-02-22 17:18:01 +00:00
Abdelatif Guettouche
10fca18b55 boards/*/esp32: Add instructions on how to use the configs with QEMU. 
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2021-02-21 09:57:01 -08:00
Abdelatif Guettouche
067da56d0c esp32c3: Some cosmetics and style fixes. 
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2021-02-21 10:29:43 -03:00
Abdelatif Guettouche
10822799fb esp32c3: Add GPIO IRQ support. 
The GPIO example was also extended to include testing an interrupt pin.

Co-authored-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
Co-authored-by: Alan Carvalho <alan.carvalho@espressif.com>
 2021-02-21 10:29:43 -03:00
Alan Carvalho
4a42998f36 esp32-c3: Add the GPIO driver. 
This commits adds support for the ESP32-C3 IO Mux and GPIO Matrix.  It
also includes necessary board logic to run the GPIO example with 2
outputs.

Co-authored-by: Alan Carvalho <alan.carvalho@espressif.com>
Co-authored-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2021-02-21 10:29:43 -03:00
Gustavo Henrique Nihei
4a6cdc8255 risc-v/esp32c3-devkit: Clean-up NSH configuration 2021-02-19 21:19:22 +00:00
Gustavo Henrique Nihei
303326bb52 risc-v/esp32c3: Enable stdio buffering for esp32c3-devkit NSH configuration 2021-02-19 21:19:22 +00:00
Gustavo Henrique Nihei
424a838021 esp32c3/nsh: Use Readline for NSH cmdline editor 2021-02-19 06:32:27 -08:00
Abdelatif Guettouche
5562f08369 boards: Add the ESP32-C3 DevKit board 
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2021-02-18 01:21:53 -08:00
David Jablonski
41bddc8461 litex: fix mtime and mtimecmp register address 2021-02-13 15:24:28 -08:00
David Jablonski
11167857c3 litex: nsh working 2021-02-13 15:24:28 -08:00
liang
5914af84c7 arch/risc-v/bl602: spi_master support. 2021-02-13 10:31:25 -08:00
hotislandn
256b83ef8a arch:risc-v:bl602:add support for elf file apps. 
Signed-off-by: hotislandn <hotislandn@hotmail.com>
 2021-02-13 10:29:12 -08:00
hotislandn
84daebf2cc arch:risc-v:bl602: enable FPU for this target. 2021-02-08 00:29:34 -08:00
Masayuki Ishikawa
ad2e85433a boards, include, sched: Remove CONFIG_SPINLOCK_IRQ 
Summary:
- This commit removes CONFIG_SPINLOCK_IRQ to avoid complexity

Impact:
- None

Testing:
- Tested with the following configs
- spresense:wifi, spresense:smp
- esp32-devkitc:smp (QEMU), sabre-6quad:smp (QEMU)
- maix-bit:smp (QEMU), sim:smp
- stm32f4discovery:wifi
 2021-02-05 22:50:04 -08:00
Brennan Ashton
a42260a1ef boards: bl602evb flash and debug notes 2021-02-01 09:11:18 -03:00
Masayuki Ishikawa
9a99b7dd83 boards: maix-bit: Update README.txt regarding the kflash_gui 
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
 2021-01-28 18:32:57 -08:00
Kurun
6fd80289f9 Fix git clone repository 2021-01-20 22:35:59 +09:00
liang
caf2d1430e arch/risc-v/bl602: add gpioirq and i2c(master) driver 2021-01-14 08:55:03 -08:00
liang
32708ab849 arch/risc-v/bl602 : add spiflash(hardware sf controller) 2021-01-11 17:59:00 -08:00
YAMAMOTO Takashi
fc7cddee39 Deal with "sed -i" portability 
An empty extension for sed -i is not widely available.

* Where it isn't available (eg. macOS's sed) "sed -i -e" will
  create a backup file with the "-e" suffix.

* Even GNU sed documentation says it's "not recommended".

This commit deals with it by:

* Replace it with a more appropriate tool (kconfig-tweak)

* Or, specify the extension (.bak)
 2021-01-11 08:38:19 +01:00
liang
2889315c20 arch/risc-v/bl602 : add pwm onshot watchdog driver. 2021-01-06 23:40:37 -08:00
Brennan Ashton
dd26d9c9f9 BL602: Add support for system reboot modes 
Signed-off-by: Brennan Ashton <bashton@brennanashton.com>
 2021-01-02 00:14:37 -06:00
Brennan Ashton
e062bd08ce bl602: Update register defines and drivers 2020-12-30 23:27:42 -06:00
Virus.V
5f71e2be79 fix ci build failed 2020-12-29 01:52:09 -08:00
Virus.V
3e0a84182e check bl602 license 2020-12-29 01:52:09 -08:00
yangyue
d354a2f19f fix some code style 2020-12-29 01:52:09 -08:00
Virus.V
2b8e0945a9 Fix BL602 CI Build failed. 
Modify the default configuration in KConfig.
Sync latest commit from mainline.

Remove unused demo configuration

fixup bl602 nsh defconfig cause CICD failed

Rebase from mainline code
 2020-12-29 01:52:09 -08:00
Virus.V
7e84874cb1 Reconstruct bl602 readme; move up_irq_save/restore declaration to common place 2020-12-29 01:52:09 -08:00
Virus.V
ce40edbd11 Solve the problems pointed out in the comments 2020-12-29 01:52:09 -08:00
Lei Chen
58bd873729 Add Basic support for BL602(UART timer CLIC) 2020-12-29 01:52:09 -08:00