Gregory Nutt
|
0db10d9057
|
Fix some typos in comments and conditioned out code
|
2015-03-14 09:14:51 -06:00 |
|
Gregory Nutt
|
4ebeeecb7b
|
Fix some typos in comments and conditioned out code
|
2015-03-14 09:14:51 -06:00 |
|
Gregory Nutt
|
7583c94252
|
Move board_ prototypes from arch.h to board.h
|
2015-02-27 20:02:03 -06:00 |
|
Gregory Nutt
|
12d61531aa
|
Move board_ prototypes from arch.h to board.h
|
2015-02-27 20:02:03 -06:00 |
|
Gregory Nutt
|
42327117a3
|
configs/: board function prototypes are now in include/nuttx/board.h. Remove from board header file; Add inclusion of nuttx/board.h to all files referencing board functions
|
2015-02-27 18:49:24 -06:00 |
|
Gregory Nutt
|
f75184b5ac
|
configs/: board function prototypes are now in include/nuttx/board.h. Remove from board header file; Add inclusion of nuttx/board.h to all files referencing board functions
|
2015-02-27 18:49:24 -06:00 |
|
Gregory Nutt
|
00a4b1f6d6
|
configs/: Remove prototypes of board_led* functions from all board header files
|
2015-02-27 17:32:01 -06:00 |
|
Gregory Nutt
|
d80455bbce
|
configs/: Remove prototypes of board_led* functions from all board header files
|
2015-02-27 17:32:01 -06:00 |
|
Gregory Nutt
|
2c82dd2afb
|
Refresh configurations
|
2015-02-10 08:48:02 -06:00 |
|
Gregory Nutt
|
fa366e5ddb
|
Refresh configurations
|
2015-02-10 08:48:02 -06:00 |
|
Gregory Nutt
|
764b5075bc
|
Network: Add an IPv4 configuration option. Hardcoded to =y for now, but I would like to be able to select IPv4 and/or IPv6 in the future
|
2015-01-14 10:51:09 -06:00 |
|
Gregory Nutt
|
babe9cf08e
|
Network: Add an IPv4 configuration option. Hardcoded to =y for now, but I would like to be able to select IPv4 and/or IPv6 in the future
|
2015-01-14 10:51:09 -06:00 |
|
Gregory Nutt
|
32238fa2bc
|
A previous change increased the task name size allocation by one to hold a NUL terminator. This changes reduces the configured name size by one so that no additional memory is used
|
2014-12-17 12:30:26 -06:00 |
|
Gregory Nutt
|
d286c0f32f
|
A previous change increased the task name size allocation by one to hold a NUL terminator. This changes reduces the configured name size by one so that no additional memory is used
|
2014-12-17 12:30:26 -06:00 |
|
Gregory Nutt
|
e6978a72e8
|
Nucleo-F4x1RE: Fix some joystick shield logic
|
2014-12-04 09:37:46 -06:00 |
|
Gregory Nutt
|
c0c455a7c9
|
Nucleo-F4x1RE: Fix some joystick shield logic
|
2014-12-04 09:37:46 -06:00 |
|
Gregory Nutt
|
72041adc9b
|
Nucleo-F4x1RE: Add support for an analog joystick shield. There are still some ADC issues to be worked through as of the initial commit
|
2014-12-03 16:41:09 -06:00 |
|
Gregory Nutt
|
7180175793
|
Nucleo-F4x1RE: Add support for an analog joystick shield. There are still some ADC issues to be worked through as of the initial commit
|
2014-12-03 16:41:09 -06:00 |
|
Gregory Nutt
|
e1289c5ebc
|
Update README
|
2014-12-03 15:31:33 -06:00 |
|
Gregory Nutt
|
1c4a4b9029
|
Update README
|
2014-12-03 15:31:33 -06:00 |
|
Gregory Nutt
|
d4efa9eb9c
|
SAMA5D3 Xplained: A few fixes for the AJoystick driver (still not working)
|
2014-12-03 14:33:00 -06:00 |
|
Gregory Nutt
|
69fcd1c048
|
SAMA5D3 Xplained: A few fixes for the AJoystick driver (still not working)
|
2014-12-03 14:33:00 -06:00 |
|
Gregory Nutt
|
6574b27abb
|
SAMA5D3 Xplained: Add support for the Itead Joystick shield
|
2014-12-03 12:24:23 -06:00 |
|
Gregory Nutt
|
1f2447502f
|
SAMA5D3 Xplained: Add support for the Itead Joystick shield
|
2014-12-03 12:24:23 -06:00 |
|
Gregory Nutt
|
084e984efb
|
Fix minor typos in C comments
|
2014-11-27 07:57:32 -06:00 |
|
Gregory Nutt
|
084fe072fc
|
Fix minor typos in C comments
|
2014-11-27 07:57:32 -06:00 |
|
Gregory Nutt
|
121aa0ca68
|
Update comments and README
|
2014-11-24 07:25:40 -06:00 |
|
Gregory Nutt
|
6a3a2f466c
|
Update comments and README
|
2014-11-24 07:25:40 -06:00 |
|
Gregory Nutt
|
5ead6b402d
|
Network: Misc changes to UDP bind logic for the case of multiple networks
|
2014-11-21 17:00:08 -06:00 |
|
Gregory Nutt
|
15c07e0d67
|
Network: Misc changes to UDP bind logic for the case of multiple networks
|
2014-11-21 17:00:08 -06:00 |
|
Gregory Nutt
|
5055d00caf
|
Update READMEs
|
2014-11-21 14:05:20 -06:00 |
|
Gregory Nutt
|
7fa3362ab4
|
Update READMEs
|
2014-11-21 14:05:20 -06:00 |
|
Gregory Nutt
|
12a9937913
|
apps/examples/bridge: Lots of fixes. I think it is working although I have still have host firewall issues in testing
|
2014-11-21 10:16:19 -06:00 |
|
Gregory Nutt
|
690d9fc268
|
apps/examples/bridge: Lots of fixes. I think it is working although I have still have host firewall issues in testing
|
2014-11-21 10:16:19 -06:00 |
|
Gregory Nutt
|
2f972d2781
|
apps/examples/bridge: Add host-side test driver
|
2014-11-21 08:20:25 -06:00 |
|
Gregory Nutt
|
71d27ec3da
|
apps/examples/bridge: Add host-side test driver
|
2014-11-21 08:20:25 -06:00 |
|
Gregory Nutt
|
7cea0f5a69
|
SAMA5D3 Xplained: Add an apps/examples/bridge configuration
|
2014-11-20 16:24:30 -06:00 |
|
Gregory Nutt
|
5d231b25f0
|
SAMA5D3 Xplained: Add an apps/examples/bridge configuration
|
2014-11-20 16:24:30 -06:00 |
|
Gregory Nutt
|
3715040386
|
Change CONFIG_NET_RECEIVE_WONDOW to CONFIG_NET_ETH_TCP_RECVWNDO or CONFIG_NET_SLIP_TCP_RECVWNDO in all defconfig files
|
2014-11-16 10:49:33 -06:00 |
|
Gregory Nutt
|
29dc5916af
|
Change CONFIG_NET_RECEIVE_WONDOW to CONFIG_NET_ETH_TCP_RECVWNDO or CONFIG_NET_SLIP_TCP_RECVWNDO in all defconfig files
|
2014-11-16 10:49:33 -06:00 |
|
Gregory Nutt
|
66f49ae9b4
|
Rename CONFIG_NET_BUFSIZE to CONFIG_NET_ETH_MTU in all configs/ README.txt files
|
2014-11-16 08:18:56 -06:00 |
|
Gregory Nutt
|
d6680d8524
|
Rename CONFIG_NET_BUFSIZE to CONFIG_NET_ETH_MTU in all configs/ README.txt files
|
2014-11-16 08:18:56 -06:00 |
|
Gregory Nutt
|
f31dca368b
|
Remove CONFIG_MAX_TASK_ARGS from all Kconfigs and defconfigs
|
2014-11-12 18:02:19 -06:00 |
|
Gregory Nutt
|
fcffafee30
|
Remove CONFIG_MAX_TASK_ARGS from all Kconfigs and defconfigs
|
2014-11-12 18:02:19 -06:00 |
|
Gregory Nutt
|
857d0b8e76
|
Remove non-standard, conditional syslog_enable(), instead only the required, standard setlogmask()
|
2014-10-09 06:09:03 -06:00 |
|
Gregory Nutt
|
4efb064169
|
Remove non-standard, conditional syslog_enable(), instead only the required, standard setlogmask()
|
2014-10-09 06:09:03 -06:00 |
|
Gregory Nutt
|
a9fa023ae1
|
All USB MSC-related files under nuttx/configs changed to use the corrected syslog interfaces
|
2014-10-08 14:59:10 -06:00 |
|
Gregory Nutt
|
8c1e954b84
|
All USB MSC-related files under nuttx/configs changed to use the corrected syslog interfaces
|
2014-10-08 14:59:10 -06:00 |
|
Gregory Nutt
|
4d851b150d
|
All NSH-related files under nuttx/configs changed to use the corrected syslog interfaces
|
2014-10-08 14:28:55 -06:00 |
|
Gregory Nutt
|
f40857c04f
|
All NSH-related files under nuttx/configs changed to use the corrected syslog interfaces
|
2014-10-08 14:28:55 -06:00 |
|
Gregory Nutt
|
bee22181f4
|
Fix some comments: Remove button description from GPIO interrupt handlers that derive from the button interrupt handler
|
2014-09-29 12:22:31 -06:00 |
|
Gregory Nutt
|
712d130a13
|
Fix some comments: Remove button description from GPIO interrupt handlers that derive from the button interrupt handler
|
2014-09-29 12:22:31 -06:00 |
|
Gregory Nutt
|
4aa785a503
|
Rename CONFIG_EXAMPLES_NXCONSOLE to CONFIG_EXAMPLES_NXTERM; rename CONFIG_NXWM_NXCONSOLE to CONFIG_NXWM_NXTERM
|
2014-09-20 14:25:51 -06:00 |
|
Gregory Nutt
|
3d050101eb
|
Rename CONFIG_EXAMPLES_NXCONSOLE to CONFIG_EXAMPLES_NXTERM; rename CONFIG_NXWM_NXCONSOLE to CONFIG_NXWM_NXTERM
|
2014-09-20 14:25:51 -06:00 |
|
Gregory Nutt
|
3dd8c08714
|
Remove final traces of the 8015 from the NuttX source tree
|
2014-09-01 13:21:15 -06:00 |
|
Gregory Nutt
|
23147c40a5
|
Remove final traces of the 8015 from the NuttX source tree
|
2014-09-01 13:21:15 -06:00 |
|
Gregory Nutt
|
f15246ec6c
|
Remove CONFIG_MM_MULTIHEAP. Non-multiheap operation is no longer supported
|
2014-08-31 10:54:55 -06:00 |
|
Gregory Nutt
|
3c1a70c9dc
|
Remove CONFIG_MM_MULTIHEAP. Non-multiheap operation is no longer supported
|
2014-08-31 10:54:55 -06:00 |
|
Gregory Nutt
|
bda6c84bab
|
Refresh all configurations that have MMUs
|
2014-08-30 07:51:13 -06:00 |
|
Gregory Nutt
|
38b1f11e57
|
Refresh all configurations that have MMUs
|
2014-08-30 07:51:13 -06:00 |
|
Gregory Nutt
|
decfdf63c4
|
Add linker scripts needed to build ELF modules
|
2014-08-24 12:57:42 -06:00 |
|
Gregory Nutt
|
df4525de25
|
Add linker scripts needed to build ELF modules
|
2014-08-24 12:57:42 -06:00 |
|
Gregory Nutt
|
e642123524
|
Add ELF CFLAGS and LDFLAGS in some Make.defs files
|
2014-08-24 12:56:28 -06:00 |
|
Gregory Nutt
|
021c3be415
|
Add ELF CFLAGS and LDFLAGS in some Make.defs files
|
2014-08-24 12:56:28 -06:00 |
|
Gregory Nutt
|
1b2a96c965
|
Change CONFIG_ADDRENV to CONFIG_ARCH_ADDRENV; change how it is selected -- the architecure must first declare support
|
2014-08-24 06:42:11 -06:00 |
|
Gregory Nutt
|
1624e2fbcf
|
Change CONFIG_ADDRENV to CONFIG_ARCH_ADDRENV; change how it is selected -- the architecure must first declare support
|
2014-08-24 06:42:11 -06:00 |
|
Gregory Nutt
|
d767c06085
|
Update README files, Kconfig help comments, and make the network monitor not EXPERIMENTAL
|
2014-08-18 07:24:47 -06:00 |
|
Gregory Nutt
|
a8d7772ad6
|
Update README files, Kconfig help comments, and make the network monitor not EXPERIMENTAL
|
2014-08-18 07:24:47 -06:00 |
|
Gregory Nutt
|
b4d98da404
|
Change the way PHY interrupts work: disable automatically. Then we have to re-subscribe each time after the interrupt fires
|
2014-08-17 16:51:56 -06:00 |
|
Gregory Nutt
|
004788d7c0
|
Change the way PHY interrupts work: disable automatically. Then we have to re-subscribe each time after the interrupt fires
|
2014-08-17 16:51:56 -06:00 |
|
Gregory Nutt
|
b84210d10d
|
SAMA5 PHY: Add more debug instrumentation; Fix logic that would be used to disable PHY interrupts
|
2014-08-17 14:07:53 -06:00 |
|
Gregory Nutt
|
7cc93b708a
|
SAMA5 PHY: Add more debug instrumentation; Fix logic that would be used to disable PHY interrupts
|
2014-08-17 14:07:53 -06:00 |
|
Gregory Nutt
|
073c2abb10
|
KSZ80x1 PHY interrupts are active low and should trigger on the falling edge
|
2014-08-17 13:15:59 -06:00 |
|
Gregory Nutt
|
1db9858e9d
|
KSZ80x1 PHY interrupts are active low and should trigger on the falling edge
|
2014-08-17 13:15:59 -06:00 |
|
Gregory Nutt
|
0873ee72f6
|
More of the PHY event notification logic change: Fix some compile errors when full feature is enabled; Add some missing ioctol logic
|
2014-08-16 15:04:09 -06:00 |
|
Gregory Nutt
|
057af36c1d
|
More of the PHY event notification logic change: Fix some compile errors when full feature is enabled; Add some missing ioctol logic
|
2014-08-16 15:04:09 -06:00 |
|
Gregory Nutt
|
16c1405a70
|
Convert existing board specific PHY interrupt interfaces to use newly defined standard interface
|
2014-08-16 08:35:31 -06:00 |
|
Gregory Nutt
|
ec47914cf8
|
Convert existing board specific PHY interrupt interfaces to use newly defined standard interface
|
2014-08-16 08:35:31 -06:00 |
|
Gregory Nutt
|
96224efa60
|
SAMA5 setenv.sh: Add another CodeSourcery install path
|
2014-08-16 08:33:20 -06:00 |
|
Gregory Nutt
|
d79c311508
|
SAMA5 setenv.sh: Add another CodeSourcery install path
|
2014-08-16 08:33:20 -06:00 |
|
Gregory Nutt
|
04f59f1761
|
Update README files
|
2014-08-12 10:01:12 -06:00 |
|
Gregory Nutt
|
eef608b942
|
Update README files
|
2014-08-12 10:01:12 -06:00 |
|
Gregory Nutt
|
cff5132179
|
SAMA5: Enable the 32.768 crystal if SCHED_TICKLESS is selected
|
2014-08-11 14:29:43 -06:00 |
|
Gregory Nutt
|
1787b3e600
|
SAMA5: Enable the 32.768 crystal if SCHED_TICKLESS is selected
|
2014-08-11 14:29:43 -06:00 |
|
Gregory Nutt
|
86ebe4725b
|
Updated README files
|
2014-08-10 20:02:45 -06:00 |
|
Gregory Nutt
|
c6273d083d
|
Updated README files
|
2014-08-10 20:02:45 -06:00 |
|
Gregory Nutt
|
3985dc9120
|
Cosmetic changed, updated README files, improved comments
|
2014-08-10 13:11:31 -06:00 |
|
Gregory Nutt
|
c7a51f4ef1
|
Cosmetic changed, updated README files, improved comments
|
2014-08-10 13:11:31 -06:00 |
|
Gregory Nutt
|
9b76a1b758
|
Update README files
|
2014-08-10 11:34:20 -06:00 |
|
Gregory Nutt
|
b39b227e2a
|
Update README files
|
2014-08-10 11:34:20 -06:00 |
|
Gregory Nutt
|
49deb059d4
|
Change CONFIG_MSEC_PER_TICK to CONFIG_USEC_PER_TICK. This gives more options for system timers in general, but more importantly, let's us realize higher resolution for the case of CONFIG_SCHED_TICKLESS=y -- of course, at the risk of some new interger overvflow problems
|
2014-08-07 13:42:47 -06:00 |
|
Gregory Nutt
|
0aa7209765
|
Change CONFIG_MSEC_PER_TICK to CONFIG_USEC_PER_TICK. This gives more options for system timers in general, but more importantly, let's us realize higher resolution for the case of CONFIG_SCHED_TICKLESS=y -- of course, at the risk of some new interger overvflow problems
|
2014-08-07 13:42:47 -06:00 |
|
Gregory Nutt
|
7edc6a5666
|
Remove CONFIG_DISABLE_CLOCK
|
2014-08-07 12:35:24 -06:00 |
|
Gregory Nutt
|
caba61999a
|
Remove CONFIG_DISABLE_CLOCK
|
2014-08-07 12:35:24 -06:00 |
|
Gregory Nutt
|
1ff92f2f95
|
SAMA5D3 HSMCI: TX DMA is again disabled
|
2014-08-05 07:07:39 -06:00 |
|
Gregory Nutt
|
7b9c44101d
|
SAMA5D3 HSMCI: TX DMA is again disabled
|
2014-08-05 07:07:39 -06:00 |
|
Gregory Nutt
|
1db7842e2e
|
SAMA5 PCK: Add Main clock as an option for the PCK clock source
|
2014-08-03 10:17:50 -06:00 |
|
Gregory Nutt
|
159bcc255d
|
SAMA5 PCK: Add Main clock as an option for the PCK clock source
|
2014-08-03 10:17:50 -06:00 |
|
Gregory Nutt
|
2b0c56a31d
|
SAMA5 HSMCI: e-enable TX DMA and verify that DMA writes to the SD card are functional. They are so now TX DMA is re-enabled in the driver. This might affect the SAMA5D3 platforms where the TX DMA problem was found. The SAMA4D3 and 4 use the same HSMCI driver. Much has change since then and it is not surprising that DMA is now functional. However, the has not be re-verified on the SAMA5D3 which has a different DMA controller.
|
2014-07-30 11:20:06 -06:00 |
|
Gregory Nutt
|
276cc44878
|
SAMA5 HSMCI: e-enable TX DMA and verify that DMA writes to the SD card are functional. They are so now TX DMA is re-enabled in the driver. This might affect the SAMA5D3 platforms where the TX DMA problem was found. The SAMA4D3 and 4 use the same HSMCI driver. Much has change since then and it is not surprising that DMA is now functional. However, the has not be re-verified on the SAMA5D3 which has a different DMA controller.
|
2014-07-30 11:20:06 -06:00 |
|
Gregory Nutt
|
42b28ba383
|
SAMA5D4: Add auto-mounter support for HSMCI0
|
2014-07-29 15:34:31 -06:00 |
|
Gregory Nutt
|
7b1b915226
|
SAMA5D4: Add auto-mounter support for HSMCI0
|
2014-07-29 15:34:31 -06:00 |
|
Gregory Nutt
|
ff0de0d603
|
SAMA5D-EK: Correct system timer frequency. Input clock is MCK/2, not MCK
|
2014-07-29 07:12:36 -06:00 |
|
Gregory Nutt
|
53930d5531
|
SAMA5D-EK: Correct system timer frequency. Input clock is MCK/2, not MCK
|
2014-07-29 07:12:36 -06:00 |
|
Gregory Nutt
|
8edc57137c
|
SAMA5D3/4: All configurations. I suspect a MMC/SD multi-block DMA transfer issue. So for name, this feature is disabled in all configurations
|
2014-07-23 07:58:10 -06:00 |
|
Gregory Nutt
|
c79f86c72c
|
SAMA5D3/4: All configurations. I suspect a MMC/SD multi-block DMA transfer issue. So for name, this feature is disabled in all configurations
|
2014-07-23 07:58:10 -06:00 |
|
Gregory Nutt
|
f240f7e513
|
SAMA5: Add slow clock support
|
2014-07-19 13:07:55 -06:00 |
|
Gregory Nutt
|
bad3ad58cb
|
SAMA5: Add slow clock support
|
2014-07-19 13:07:55 -06:00 |
|
Gregory Nutt
|
ad9b0653f5
|
Some cosmetic typo fixes
|
2014-07-09 07:12:16 -06:00 |
|
Gregory Nutt
|
695d1d933c
|
Some cosmetic typo fixes
|
2014-07-09 07:12:16 -06:00 |
|
Gregory Nutt
|
19d8b0ce97
|
Fix some cloned errors in SAM GPIO interrupt setup
|
2014-07-07 15:54:37 -06:00 |
|
Gregory Nutt
|
befcb1c961
|
Fix some cloned errors in SAM GPIO interrupt setup
|
2014-07-07 15:54:37 -06:00 |
|
Gregory Nutt
|
cbe4d3573d
|
Rename apps/examples/uip to apps/examples/webserver
|
2014-07-03 17:31:17 -06:00 |
|
Gregory Nutt
|
44988c6ca6
|
Rename apps/examples/uip to apps/examples/webserver
|
2014-07-03 17:31:17 -06:00 |
|
Gregory Nutt
|
5ba0617e9c
|
SAMA5D3/4: UPLL divisor to generate 48MHz for OHCI is different from the two families. No idea why.
|
2014-07-03 12:28:11 -06:00 |
|
Gregory Nutt
|
a5538e3431
|
SAMA5D3/4: UPLL divisor to generate 48MHz for OHCI is different from the two families. No idea why.
|
2014-07-03 12:28:11 -06:00 |
|
Gregory Nutt
|
285f66a2c1
|
NET: Rename uiplib/UIPLIB to netlib/NETLIB
|
2014-07-02 16:04:25 -06:00 |
|
Gregory Nutt
|
0eb1666cb0
|
NET: Rename uiplib/UIPLIB to netlib/NETLIB
|
2014-07-02 16:04:25 -06:00 |
|
Gregory Nutt
|
234d118c61
|
SAMA5D4-EK: NSH configuration now supports the RTC
|
2014-06-29 07:40:37 -06:00 |
|
Gregory Nutt
|
339c8edf0e
|
SAMA5D4-EK: NSH configuration now supports the RTC
|
2014-06-29 07:40:37 -06:00 |
|
Gregory Nutt
|
caf1b2d641
|
SAMA5D4-EK: NSH confuration now has FAT/ROMFS, /dev/zero, /dev/random via TRNG, an NSH startup script, and a RAM disk at /tmp
|
2014-06-28 16:11:41 -06:00 |
|
Gregory Nutt
|
0443aa9947
|
SAMA5D4-EK: NSH confuration now has FAT/ROMFS, /dev/zero, /dev/random via TRNG, an NSH startup script, and a RAM disk at /tmp
|
2014-06-28 16:11:41 -06:00 |
|
Gregory Nutt
|
37d6366f08
|
SAMA5D4: USART peripheral clock appears to be MCK/2
|
2014-06-20 11:40:36 -06:00 |
|
Gregory Nutt
|
083986e814
|
SAMA5D4: USART peripheral clock appears to be MCK/2
|
2014-06-20 11:40:36 -06:00 |
|
Gregory Nutt
|
57da49beb3
|
SAMA5D4-EK: Update pins used by HSMCI
|
2014-06-11 14:45:01 -06:00 |
|
Gregory Nutt
|
2cf637692a
|
SAMA5D4-EK: Update pins used by HSMCI
|
2014-06-11 14:45:01 -06:00 |
|
Gregory Nutt
|
1634a11bd0
|
SAMA5D3/4: More renaming. Change SAMA5D3 EMAC to EMACA and SAMA5D4 to EMACB so that the configuration and build system can configure them. I might come up with something better later
|
2014-06-10 17:40:25 -06:00 |
|
Gregory Nutt
|
e0a07125c8
|
SAMA5D3/4: More renaming. Change SAMA5D3 EMAC to EMACA and SAMA5D4 to EMACB so that the configuration and build system can configure them. I might come up with something better later
|
2014-06-10 17:40:25 -06:00 |
|
Gregory Nutt
|
ae142009da
|
SAMA5: Back out most of commit c37b5b7b97d0644743c04f2c3d9e2b7ef9f5d698. Things are going to have to be done differently
|
2014-06-09 12:16:16 -06:00 |
|
Gregory Nutt
|
1f64e9c5b9
|
SAMA5: Back out most of commit c37b5b7b97d0644743c04f2c3d9e2b7ef9f5d698. Things are going to have to be done differently
|
2014-06-09 12:16:16 -06:00 |
|
Gregory Nutt
|
895851314f
|
Updated SAMA5 SFR header file for the SAMA5D4
|
2014-06-08 07:48:36 -06:00 |
|
Gregory Nutt
|
da8dfdcb6f
|
Updated SAMA5 SFR header file for the SAMA5D4
|
2014-06-08 07:48:36 -06:00 |
|
Gregory Nutt
|
24af2deb30
|
Update SAMA5D4-EK PIO usage
|
2014-06-07 09:37:17 -06:00 |
|
Gregory Nutt
|
18224d88b3
|
Update SAMA5D4-EK PIO usage
|
2014-06-07 09:37:17 -06:00 |
|
Gregory Nutt
|
ad1701d0f9
|
SAMA5D4: Various changes to get the SAMA4D-EK to build
|
2014-06-06 15:39:40 -06:00 |
|
Gregory Nutt
|
87eacd6bf2
|
SAMA5D4: Various changes to get the SAMA4D-EK to build
|
2014-06-06 15:39:40 -06:00 |
|
Gregory Nutt
|
ae01e0819d
|
SAMA5: Cosmetic clean-up of README files
|
2014-06-04 17:02:30 -06:00 |
|
Gregory Nutt
|
50893fd36c
|
SAMA5: Cosmetic clean-up of README files
|
2014-06-04 17:02:30 -06:00 |
|
Gregory Nutt
|
70207e05e3
|
SAMA5: Rename most EMAC definitions to EMAC0 to handle the SAMA5D4 which has to EMAC modules and no GMAC
|
2014-06-04 12:04:24 -06:00 |
|
Gregory Nutt
|
495b190e50
|
SAMA5: Rename most EMAC definitions to EMAC0 to handle the SAMA5D4 which has to EMAC modules and no GMAC
|
2014-06-04 12:04:24 -06:00 |
|
Gregory Nutt
|
2dbaed4779
|
The alternate console device CONFIG_NSH_CONDEV must not be defined unconditionally. This causes errors when using Telnet sessions. This was solved by adding CONFIG_NSH_ALTCONDEV: CONFIG_NSH_ALTCONDEV enables or disables the feature then, if enabled, CONFIG_NSH_CONDEV provides the alternative console device name
|
2014-05-05 08:52:02 -06:00 |
|
Gregory Nutt
|
f924601fc1
|
The alternate console device CONFIG_NSH_CONDEV must not be defined unconditionally. This causes errors when using Telnet sessions. This was solved by adding CONFIG_NSH_ALTCONDEV: CONFIG_NSH_ALTCONDEV enables or disables the feature then, if enabled, CONFIG_NSH_CONDEV provides the alternative console device name
|
2014-05-05 08:52:02 -06:00 |
|
Gregory Nutt
|
8713ee3428
|
SAMA5 board.h files use type xcpt_t and so must include nuttx/irq.h for type xcpt_t
|
2014-04-17 10:01:15 -06:00 |
|
Gregory Nutt
|
2f3fa3cbdc
|
SAMA5 board.h files use type xcpt_t and so must include nuttx/irq.h for type xcpt_t
|
2014-04-17 10:01:15 -06:00 |
|
Gregory Nutt
|
5eb9ee30dd
|
Updated README files
|
2014-04-16 16:41:47 -06:00 |
|
Gregory Nutt
|
9efb83c5ab
|
Updated README files
|
2014-04-16 16:41:47 -06:00 |
|
Gregory Nutt
|
51950d7850
|
Undefine IRQPRIO in all configurations it should not be set
|
2014-04-16 08:29:39 -06:00 |
|
Gregory Nutt
|
e21212f2b4
|
Undefine IRQPRIO in all configurations it should not be set
|
2014-04-16 08:29:39 -06:00 |
|
Gregory Nutt
|
ab5b37189b
|
More trailing whilespace removal
|
2014-04-13 16:22:22 -06:00 |
|
Gregory Nutt
|
f8024cf409
|
More trailing whilespace removal
|
2014-04-13 16:22:22 -06:00 |
|
Gregory Nutt
|
cecf3775e2
|
SAMA5: The PIO used for the red LED is also used as the camera module reset line: Added a configuration option to suppress use of the red LED if the PIO is used for another purpose. Reported by David Sidrane.
|
2014-04-11 15:57:35 -06:00 |
|
Gregory Nutt
|
cd6039933e
|
SAMA5: The PIO used for the red LED is also used as the camera module reset line: Added a configuration option to suppress use of the red LED if the PIO is used for another purpose. Reported by David Sidrane.
|
2014-04-11 15:57:35 -06:00 |
|
Gregory Nutt
|
069ea487ae
|
Long needed clean up of DNS resolver for coding style and naming conventions
|
2014-04-11 12:25:32 -06:00 |
|
Gregory Nutt
|
3e085ec0af
|
Long needed clean up of DNS resolver for coding style and naming conventions
|
2014-04-11 12:25:32 -06:00 |
|
Gregory Nutt
|
724ad8d7b5
|
Updated README files and comments
|
2014-04-07 07:43:28 -06:00 |
|
Gregory Nutt
|
ac3865fd89
|
Updated README files and comments
|
2014-04-07 07:43:28 -06:00 |
|
Gregory Nutt
|
c3c5633419
|
SAMA5: Fix some issues with SDRAM at 528MHz CPU clock
|
2014-04-04 11:37:39 -06:00 |
|
Gregory Nutt
|
bd274dba7f
|
SAMA5: Fix some issues with SDRAM at 528MHz CPU clock
|
2014-04-04 11:37:39 -06:00 |
|
Gregory Nutt
|
22c2ef2abe
|
SAMA5 boards: Operation at 528Mhz has been verified
|
2014-04-04 10:36:53 -06:00 |
|
Gregory Nutt
|
0b7ec97370
|
SAMA5 boards: Operation at 528Mhz has been verified
|
2014-04-04 10:36:53 -06:00 |
|
Gregory Nutt
|
6500587e35
|
SAMA5 boards: Refresh all configuration files
|
2014-04-04 09:38:39 -06:00 |
|
Gregory Nutt
|
d9e0116075
|
SAMA5 boards: Refresh all configuration files
|
2014-04-04 09:38:39 -06:00 |
|
Gregory Nutt
|
52cfdccd7a
|
SAMA5 boards: Add set up for 528MHz CPU clock
|
2014-04-03 17:12:17 -06:00 |
|
Gregory Nutt
|
eb5a2d670c
|
SAMA5 boards: Add set up for 528MHz CPU clock
|
2014-04-03 17:12:17 -06:00 |
|
Gregory Nutt
|
2a1a468fe1
|
SAMA5D3 Xplained: Delay loop calibrated
|
2014-04-03 16:38:36 -06:00 |
|
Gregory Nutt
|
91c9e60e14
|
SAMA5D3 Xplained: Delay loop calibrated
|
2014-04-03 16:38:36 -06:00 |
|
Gregory Nutt
|
cb86f97702
|
If LOWVECTORS is selected, then we need to clear the VBAR register. A bootloader may have left the VBAR in an bad state
|
2014-04-03 13:09:30 -06:00 |
|
Gregory Nutt
|
c9fc03d52f
|
If LOWVECTORS is selected, then we need to clear the VBAR register. A bootloader may have left the VBAR in an bad state
|
2014-04-03 13:09:30 -06:00 |
|
Gregory Nutt
|
a23fc8cc56
|
Updated comments and README
|
2014-04-02 09:03:29 -06:00 |
|
Gregory Nutt
|
6201df6463
|
Updated comments and README
|
2014-04-02 09:03:29 -06:00 |
|
Gregory Nutt
|
015c911b8b
|
SAMA5 DBGU: Add logic to suppress DBGU reconfiguration when started from a bootloader
|
2014-04-02 09:03:27 -06:00 |
|
Gregory Nutt
|
0d66ba9c00
|
SAMA5 DBGU: Add logic to suppress DBGU reconfiguration when started from a bootloader
|
2014-04-02 09:03:27 -06:00 |
|
Gregory Nutt
|
13295a6a1b
|
Top level make will now generate a U-Boot uImage file
|
2014-04-01 11:56:58 -06:00 |
|
Gregory Nutt
|
b3daf84b12
|
Top level make will now generate a U-Boot uImage file
|
2014-04-01 11:56:58 -06:00 |
|
Gregory Nutt
|
dd094828ec
|
SAMA5: Add support for DBGU. Xplained board now uses DBGU for the serial console
|
2014-04-01 11:24:15 -06:00 |
|
Gregory Nutt
|
cbdc9155ab
|
SAMA5: Add support for DBGU. Xplained board now uses DBGU for the serial console
|
2014-04-01 11:24:15 -06:00 |
|
Gregory Nutt
|
eb74d08118
|
Cosmetic update to comments and README files
|
2014-03-31 17:25:39 -06:00 |
|
Gregory Nutt
|
3d8cbb415c
|
Cosmetic update to comments and README files
|
2014-03-31 17:25:39 -06:00 |
|
Gregory Nutt
|
cd2c436f96
|
Cosmetic updates to comments and README files
|
2014-03-31 15:10:15 -06:00 |
|
Gregory Nutt
|
a44a4444e2
|
Cosmetic updates to comments and README files
|
2014-03-31 15:10:15 -06:00 |
|
Gregory Nutt
|
cdcf4f3ad6
|
Costmetic fixes to README and some comments
|
2014-03-30 11:34:18 -06:00 |
|
Gregory Nutt
|
85b0a1a544
|
Costmetic fixes to README and some comments
|
2014-03-30 11:34:18 -06:00 |
|
Gregory Nutt
|
b0c302ea06
|
Add instructions for running NuttX from NAND or TFTP
|
2014-03-30 10:25:44 -06:00 |
|
Gregory Nutt
|
fa5988bf7b
|
Add instructions for running NuttX from NAND or TFTP
|
2014-03-30 10:25:44 -06:00 |
|
Gregory Nutt
|
33f57c6df2
|
SAMA5 Boards: When running from SDRAM, a 32KB offset is needed by the bootloader
|
2014-03-30 10:24:31 -06:00 |
|
Gregory Nutt
|
4410deb8b6
|
SAMA5 Boards: When running from SDRAM, a 32KB offset is needed by the bootloader
|
2014-03-30 10:24:31 -06:00 |
|
Gregory Nutt
|
c433c684fa
|
SAMA5D23 boards: When running out of SDRAM, need to query the PMC to determine operating frequency
|
2014-03-29 17:51:06 -06:00 |
|
Gregory Nutt
|
aac2a6759d
|
SAMA5D23 boards: When running out of SDRAM, need to query the PMC to determine operating frequency
|
2014-03-29 17:51:06 -06:00 |
|
Gregory Nutt
|
0d22850b30
|
SAMA5D3 Xplained: Has no NOR flash. Remove all NOR support from board configuration
|
2014-03-29 15:05:09 -06:00 |
|
Gregory Nutt
|
8bc70e38ab
|
SAMA5D3 Xplained: Has no NOR flash. Remove all NOR support from board configuration
|
2014-03-29 15:05:09 -06:00 |
|
Gregory Nutt
|
b16da844a8
|
Add basic board support framework for the Atmel SAMA5D3 Xplained board (not finished)
|
2014-03-28 15:20:26 -06:00 |
|
Gregory Nutt
|
09fb2a1893
|
Add basic board support framework for the Atmel SAMA5D3 Xplained board (not finished)
|
2014-03-28 15:20:26 -06:00 |
|