Commit Graph

32569 Commits

Author SHA1 Message Date
Gregory Nutt
c5a92c883a arch/arm/src/kinetis: Add PMC register definitions for the K28F. 2018-05-03 13:38:28 -06:00
Gregory Nutt
0f2b8b0ca2 arch/arm/src/kinetis: Add SIM register definitions for the K28F. 2018-05-03 12:31:54 -06:00
Gregory Nutt
3c7fa88fd4 arch/arm/src/kinetis: Adds MCG register definitions for the K28F. 2018-05-03 08:21:50 -06:00
Gregory Nutt
96b6bf92a3 Cosmetic changes from review of last 2 PRs. 2018-05-02 16:46:12 -06:00
Anthony Merlino
cabb529c48 Merged in antmerlino/nuttx/photon-rgb (pull request #637)
configs/photon: Adds RGB led support

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2018-05-02 22:39:18 +00:00
Anthony Merlino
b1275abd4b Merged in antmerlino/nuttx/ina3221 (pull request #636)
drivers/sensors: Adds support for INA3221 power sensor. This has a 3 channel bus/shunt voltage pairs.

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2018-05-02 22:29:59 +00:00
Gregory Nutt
cd12ea7788 Costmetic changes from review of last PR. 2018-05-02 16:29:22 -06:00
Anthony Merlino
385d4a9108 Merged in antmerlino/nuttx/rgb_multichan (pull request #635)
drivers/rgbled: Adds support for multichannel PWM (multiple PWM channels on a single timer)

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2018-05-02 22:21:49 +00:00
Michael Jung
800da58e6c fs/nfs/rpc_clnt.c: Commit 091e3f7 broke the NFS client. sendto() can (correctly) no lnoger by used with a connected UDP socket. In that case, send() must be used instead. 2018-05-02 13:53:51 -06:00
Gregory Nutt
d2def725d9 This commits adds initial support for the Kinetis Freedom-K28F board. Not you ready for prime time.
Squashed commit of the following:

    arch/arm/src/kinetis:  A fixes from first (unsuccessful) attempt to build the Freedom-K28F configuration.
    configs/freedom-k28f:  Add basic board support for Freedom-K28F.  Initial commit is basically just the Teensy-3.x brought up to date and with name changes.
2018-05-02 13:14:32 -06:00
Jake Choy
4261249fb6 arch/arm/src/imxrt: Add GPIO5 IRQ support. 2018-05-02 09:19:42 -06:00
Michael Jung
01ee9b3abc arch/arm/src/lpc17xx: This commit adds a configurable option to allow using a part of LPC17xx's internal flash memory as a Memory Technology Device via NuttX' mtd_progmem infrastructure. Tested with LPC1769. 2018-05-01 14:49:16 -06:00
Jake Choy
63f988b404 configs/imxrt1050-evk: This commit adds support for the imxrt button. I haven't been able to get GPIO 5 to work so I have replaced the button with GPIO1 pin24. It is right next to the button so I just wire it to the existing user button for testing. 2018-05-01 14:41:19 -06:00
Jake Choy
6e1d43dd11 arch/arm/src/imxrt: This commit fixes more issues with the i.MX RT GPIO IRQ.
imxrt_gpioirq.c
    - Add check for interrupt mask register before dispatching ISR. The GPIO_ISR bits are set independent of the GPIO_IMR bits.
  imxrt_irq.c
    - fixed a range check for extint in function imxrt_irqinfo().
2018-05-01 14:25:47 -06:00
Gregory Nutt
b5411d96e6 arch/arm/src/kinetis: Correct K28F document number referenced in header file 2018-05-01 13:25:55 -06:00
Gregory Nutt
56358db441 arch/arm/src/kinetis: Add support for LPUART2-4. 2018-05-01 12:14:19 -06:00
Gregory Nutt
7927d1ff09 arch/arm/src/include/kinetis and src/kinetis: Beginning of a port to the K28F."
Squashed commit of the following:

    arch/arm/src/kinetis:  Add K28F memory map.
    arch/arm/src/include/kinetis and src/kinetis:  Add basic chip features and interrupt-related definitions for the K28F
2018-05-01 11:24:18 -06:00
Gregory Nutt
d6d42aeead configs/nrf52-pca10040: Fix an error in the name of an included file. This was introduced with the previous change to this file. 2018-05-01 07:21:08 -06:00
Michael Jung
121211f096 progmem interface: Discern r/w and erase page sizes. Introduce new up_progmem_erasesize architecture API to be able to communicate the read/write page size independently from erase page size. Implement up_progmem_erasesize for all architectures that already support progmem, assuming that for those architectures the sizes of both read/write and erase pages are identical. 2018-05-01 06:23:52 -06:00
Gregory Nutt
1b1da6c7b7 arch/arm/src/nrf52: Fix several inconsistencies in naming. Mostly cosmetic but one was causing a compiler warning. 2018-04-30 16:30:13 -06:00
Jake
e54f221ed0 arch/arm/src/imxrt: Fix some syntax errors in the GPIO IRQ logic. 2018-04-30 14:58:09 -06:00
Gregory Nutt
ea0bad7a59 arch/arm/src/kinetis: Eliminate a new warning introduced in last USB dev change. 2018-04-30 10:22:15 -06:00
Gregory Nutt
d6f9000077 net/socket: Missing semicolon in last fstat() change. 2018-04-30 09:57:43 -06:00
Gregory Nutt
fd844f8eac include/nuttx/wireless/bluetooth: Move Bluetooth header files from include/nuttx/wireless to include/nuttx/wireless/bluetooth for symmetry with other wireless technologies. 2018-04-29 12:43:09 -06:00
Shirshak Sengupta
ba0bbb93b0 arch/arm/src/tiva: Implemented Flash CONFIG_MTD_BYTE_WRITE for TM4c1294. Implemented the tiva_write function which will write an arbitrary number of bytes to flash (in multiple of 4). 2018-04-29 11:45:24 -06:00
Shirshak Sengupta
0835143537 arch/arm/src/tiva: Implements an EEPROM driver in compliance with MTD driver as provided by NUTTX for TM4C1294. The EEPROM driver currently supports only two functionalities - read bytes(multiple of 4) and write bytes (multiple of 4).
Squashed commit of the following:

Author: Gregory Nutt <gnutt@nuttx.org>
    Fix some spacing
    arch/arm/src/tiva:  Verify that the EEPROM driver at least builds.
    arch/arm/src/tiva:  Move unused function added to tm4c129_syscontrol.c to tiva_eeprom.c where it is actually used.
    arch/arm/src/tiva:  Reorganize EEPROM register definitions so that the file organization is more like other platforms.
    arch/arm/src/tiva:  Trying to resolve EEPROM register addressing.  Still some issues.
    arch/arm/src/tiva:  Ran uncrustify on tiva_eeprom.c
    arch/arm/src/tiva:  EEPROM driver is a little closer to coding standard.  Still a way to go.

Author: Shirshak Sengupta <sgshirshak@gmail.com>
    arch/arm/src/tiva: Implemented EEPROM driver in compliance with MTD driver as provided by NUTTX for TM4C1294. The EEPROM driver needs to be initialized by calling the function tiva_EEPROMInit The EEPROM driver currently supports only two functionalities - read bytes(multiple of 4) and write bytes (multiple of 4). Note - Rest of the features of EEPROM will be implemented in the future.
2018-04-29 11:04:09 -06:00
Gregory Nutt
9a1277bd8f Makefile.unix: There is a sort command in the 'make savedefconfig' file. I found that sort behaves differently on different platforms based on the environment variable LC_ALL. Now, Makefile.unix will force LC_ALL=C just for the sort command so that we can all generate equivalent defconfig files. 2018-04-29 09:47:09 -06:00
Alan Carvalho de Assis
d00441869f configs/nucleo-l476rg: Add nxdemo configuration to nucleo-l476rg using PCD8544 2018-04-28 16:29:44 -06:00
Alan Carvalho de Assis
3b26e4a5a5 configs/nucleo-l476rg: Add support to Nokia LCD PCD8544 on nucleo-l476rg 2018-04-28 16:20:26 -06:00
Dmitry Sharihin
51b78034ac arch/arm/src/tiva: Add TERMIOS IOCTL support to the Tiva serial driver. 2018-04-28 11:11:11 -06:00
David Sidrane
7e756e413d Merged in david_s5/nuttx/master_kinetis_usb_fixes (pull request #634)
kinetis usb device fixes

* kinetis:usb device use correct CONFIG OTG control

* kinetis:usb device fix interrupt storm when cable is disconnected

      The DM, DP state were incorrect because the pulldowns were not
      enabled.

      Also the pending asynchronous resume interrupt needed to be
      re-armed after the suspend is in effect. This is now done in
      the isr.

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2018-04-28 11:27:48 +00:00
Gregory Nutt
efed1b6aa1 net/udp: Remove an unused variable warning. Add some comments. 2018-04-27 18:26:38 -06:00
Jake
5e7fe7b881 arch/arm/src/imxrt: Add IOMUX implemention for GPIO5. 2018-04-27 08:42:02 -06:00
Gregory Nutt
f5d0fc7447 fs/vfs and net/udp: Repartition logic of commit 0c963449d6, moving into net/udp. Add support to handle connected UDP sockets. The correct 'optimal blksize' to return is the MSS. The MTU is always too big. 2018-04-27 08:36:25 -06:00
Ivan Ucherdzhiev
c881ea6d5b arch/arm/src/imxrt: IMXRT LPUART Clock enable fix. 2018-04-27 06:46:09 -06:00
Gregory Nutt
119ce8730f net/udp: Fix a backward conditional test added in commit 434da18cd7. 2018-04-27 06:35:51 -06:00
Alan Carvalho de Assis
745a498ce2 arch/arm/include/nrf52: All nRF52 IRQs above NRF52_IRQ_TEMP were wrong. 2018-04-26 22:03:50 -06:00
Gregory Nutt
47bf3376d1 Costmetic changes to README and to comments. 2018-04-26 22:00:11 -06:00
Gregory Nutt
434da18cd7 net/udp: Correct an error introduce in recent fixes for UDP connected sockets. The interaction between psock_udp_send() and psock_udp_sendto() was perverse: It should always pass a NULL destinatino address. 2018-04-26 21:58:09 -06:00
seyyah
77d7856642 configs/stm32f429i-disco: Add a LittlevGL configuration for stm32f429i-disco 2018-04-26 15:23:57 -06:00
Matt Thompson
d212e15a43 This commit adds basic architectural support for the OpenRISK mor1kx architecture. The initial commit was verified on a Qemu simulation but is otherwise untested.
Squashed commit of the following:

Author: Gregory Nutt <gnutt@nuttx.org>
    Update README.
    configs/or1k:  Should include header file file where exported functin is prototyped.
    arch/or1k/src:  Eliminate some warnings.
    arch/or1k:  Complete review
    Fix some recently introduced build issues
    configs/or1k/nsh:  Convert to proper, compressed defconfig file.
    Another README update.
    Update README
    configs/or1k:  Updates from initial review.
    Update README.

Author: Matt Thompson <matt@extent3d.com>

    or1k: Added configurable CPU frequency to Kconfig. Calculate tick timer match period based on configured frequency.
    OpenRISC: Enable instruction and data cache
    OpenRISC: Initial support.
2018-04-26 11:22:28 -06:00
Gregory Nutt
75f6d0a32a configs/photon: Refresh all configurations. configurations the use the SDIO card interface must support CONFIG_STM32_SDIO_CARD. 2018-04-26 10:41:06 -06:00
Gregory Nutt
44caaf0f2c arch/arm/src/imxrt: Add LIBCXX test configuration for IMXRT. 2018-04-26 08:22:37 -06:00
Gregory Nutt
27828d0128 arch/arm/src/imxrt: Fix masks used in GPIO pin configurations. Noted by jakearcx. 2018-04-26 08:18:56 -06:00
hhuysqt
144e335b85 drivers/wiresless/ieee80211: Correct some initialization problems with BCM43362 chip. Adds BCM43428 support. arch/arm/src: Add support for SDIO card to SDIO driver.
Squashed commit of the following:

Author: Gregory Nutt <gnutt@nuttx.org>
    include/nuttx/wireless/ieee80211:  Cosmetic, coding standard changes from review of last merge.
    drivers/wireless/ieee80211:  Cosmetic, coding standard changes from review of last merge.
    configs/photon:  Cosmetic, coding standard changes from review of last merge.
    arch/arm/src/stm32:  SDIO changes from last review:  Fix a few long lines and other coding standard issues; Make additions for SDIO card support dependent on a configuration option.

Author: hhuysqt <hyq9606@126.com>
    Return IEEE 802.11 MAC address just as ethernet does
    Modifyed bcmf_board_setup_oob_irq declaration
    Modified OOB ISR function types
    Add some logic according to WICED SDK
    Bug fixed: data_offset counts in 4-bytes
    Add BCM43438 logic for future developement
    Add tips on using telnet
    Use SDIO in-band interrupt instead of OOB interrupt, because Photon seems to unconnect the OOB interrupt line...
    add SDIO in-band interrupt logic
2018-04-26 08:10:23 -06:00
Pelle Windestam
0c963449d6 fs/vfs: Added support for checking if a descriptor is a socket in fstat(). 2018-04-26 06:49:13 -06:00
Gregory Nutt
f3a8e01557 arch/arm/src/imxrt/chip: Add some missing definitions for GPIO5 2018-04-25 15:12:08 -06:00
Gregory Nutt
17cc0b9bfe arch/arm/src/imxrt: Minor reparitioning to account for the fact that the GPIO5 base address is not contiguous with the GPIO1-4 base addresses. 2018-04-25 14:54:14 -06:00
Gregory Nutt
10d99cc6e6 include/nuttx/wireless: Add a setbaud() method to the HCI UART lower half interface that can be used to change the default BAUD selection. arch/arm/src/stm32: Implement the setbaud() method for the STM32 HCI UART. 2018-04-25 13:09:08 -06:00
Gregory Nutt
cfc5f86862 net/udp: Minor update from review of 091e3f732e. In connect(), AF_UNSPEC is used to disconnect UDP socket. However, initial commit lacked logic to mark the socket as disconnected. 2018-04-25 10:13:59 -06:00