and remove CONFIG_LIBC_LONG_LONG option to simplify the usage.
note: the size will increase 668
before change:
text data bss dec hex filename
168440 348 4480 173268 2a4d4 nuttx
after change:
text data bss dec hex filename
169108 348 4480 173936 2a770 nuttx
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
This patch introduces a configuration option USBMSC_WRMULTIPLE,
which is used to store multiple blocks into a larger chunk that
then gets written via the mmcsd_writemultiple() (in case mmcsd
is used).
The bottleneck with the current implementation is the poor
performance due to short block writes. USBMSC_DRVR_WRITE()
always writes only one sector (with eMMC that's usually 512 bytes).
eMMC devices usually erase much larger regions with near constant
time (see Jedec JESD84-B51, Extended CSD register byte [225],
SUPER_PAGE_SIZE): 'This register defines one or multiple of
programmable boundary unit that is programmed at the same time.'
If USBMSC_WRMULTIPLE is defined, then USBMSC_NWRREQS is used to
allocate the write buffer size. We don't want this to be the
default behavior yet as this may reveal unseen bugs in usb drivers
due to the faster overall performance.
Sample configurations with measured performance:
- Without USBMSC_WRMULTIPLE: 470 Kb/s
- With USBMSC_WRMULTIPLE, CONFIG_USBMSC_NWRREQS=4: 1.1 Mb/s
(dd with bs=2k)
- With USBMSC_WRMULTIPLE, CONFIG_USBMSC_NWRREQS=16: 5.2 Mb/s
(dd with bs=8k)
No doubt, this feature alone may make the mass storage work 10
times faster than before with eMMC cards.
Signed-off-by: Eero Nurkkala <eero.nurkkala@offcode.fi>
1. Fix error recovery mechanism during transmission error
handling (enable transmission at the end).
2. Fix compilation / operation with CONFIG_SAMV7_EMAC_PREALLOCATE=y
3. Enable fully configured address space for transmission queues
to allow sending packets with length more than 976 bytes. With
partially configured address space the AHB error is generated
during transmission of long packets.
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
With faster data transfer rates, it was seen that the read
requests occasionally were issued while the USB RX operation
was actually in progress. This patch makes sure the system
doesn't accidentally read the RX fifo while it's being filled
up, but rather, checks for the RXCSRL_REG_EPN_RX_PKT_RDY_MASK
flag. This flag indicates the packet is ready to be read.
Signed-off-by: Eero Nurkkala <eero.nurkkala@offcode.fi>
fix regression of invalid update the rexmit_seq in buffer mode
rexmit_seq should not be used instead of sndseq in fast retransmission,
sndseq of retransmission in the packet does not need to be re-updated
Signed-off-by: chao.an <anchao@xiaomi.com>
cache_dbus_mmu_set and cache_ibus_mmu_set return positive values in case
of errors, so DEBUVERIFY could never detect them since this macro checks
for negative values.
Besides, the successful execution of those functions is mandatory for
the reliable operation under Protected Mode, so the verification is
always performed, even when DEBUG is not enabled.
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
After #6400 the prebuilt bootloader may be used for loading the NuttX
images when BUILD_PROTECTED is enabled.
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
clock/clock_settime.c: In function ‘clock_settime’:
clock/clock_settime.c:120:45: warning: passing argument 1 of ‘clock_timekeeping_set_wall_time’
discards ‘const’ qualifier from pointer target type [-Wdiscarded-qualifiers]
120 | ret = clock_timekeeping_set_wall_time(tp);
| ^~
In file included from clock/clock_settime.c:37:
sched/clock/clock_timekeeping.h:40:58: note: expected ‘struct timespec *’
but argument is of type ‘const struct timespec *’
40 | int clock_timekeeping_set_wall_time(FAR struct timespec *ts);
|
Signed-off-by: chao.an <anchao@xiaomi.com>
Net poll teardown is not protected by net lock, if the conn is released
before teardown, the assertion failure will be triggered during free dev
callback, this patch will add the net lock around net poll teardown to
fix race condition
nuttx/libs/libc/assert/lib_assert.c:36
nuttx/net/devif/devif_callback.c:85
nuttx/net/tcp/tcp_netpoll.c:405
nuttx/fs/vfs/fs_poll.c:244
nuttx/fs/vfs/fs_poll.c:500
Signed-off-by: chao.an <anchao@xiaomi.com>
Displays with resolution that is not multiplication of 8 had some issues in landscape mode (columns ware shifted).
Fixed function for copying bits.
Optimized memory reload for landscape mode.
When the free connection list is unenough to alloc a new instance,
the TCP stack will reuse the currently closed connection, but if
the handle is not released by the user via close(2), the reference
count of the connection remains in a non-zero value, it will cause
the assertion to fail, so when the handle is not released we should
not use such a conn instance when being actively closed, and ensure
that the reference count is assigned within the net lock protection
|(gdb) bt
|#0 up_assert (filename=0x565c78f7 "tcp/tcp_conn.c", lineno=771) at sim/up_assert.c:75
|#1 0x56566177 in _assert (filename=0x565c78f7 "tcp/tcp_conn.c", linenum=771) at assert/lib_assert.c:36
|#2 0x5657d620 in tcp_free (conn=0x565fb3e0 <g_tcp_connections>) at tcp/tcp_conn.c:771
|#3 0x5657d5a1 in tcp_alloc (domain=2 '\002') at tcp/tcp_conn.c:700
|#4 0x565b1f50 in inet_tcp_alloc (psock=0xf3dea150) at inet/inet_sockif.c:144
|#5 0x565b2082 in inet_setup (psock=0xf3dea150, protocol=0) at inet/inet_sockif.c:253
|#6 0x565b1bf0 in psock_socket (domain=2, type=1, protocol=0, psock=0xf3dea150) at socket/socket.c:121
|#7 0x56588f5f in socket (domain=2, type=1, protocol=0) at socket/socket.c:278
|#8 0x565b11c0 in hello_main (argc=1, argv=0xf3dfab10) at hello_main.c:35
|#9 0x56566631 in nxtask_startup (entrypt=0x565b10ef <hello_main>, argc=1, argv=0xf3dfab10) at sched/task_startup.c:70
|#10 0x565597fa in nxtask_start () at task/task_start.c:134
Signed-off-by: chao.an <anchao@xiaomi.com>
This reverts commit b88a1fd7fd. [1]
Because:
* It casues assertion failures like [2].
* I don't understand what it attempted to fix.
[1]
```
commit b88a1fd7fd
Author: chao.an <anchao@xiaomi.com>
Date: Sat Jul 2 13:17:41 2022 +0800
net/tcp: discard connect reference before free
connect reference should be set to 0 before free
Signed-off-by: chao.an <anchao@xiaomi.com>
```
[2]
```
#0 up_assert (filename=0x5516d0 "tcp/tcp_conn.c", lineno=771) at sim/up_assert.c:75
#1 0x000000000040a4bb in _assert (filename=0x5516d0 "tcp/tcp_conn.c", linenum=771) at assert/lib_assert.c:36
#2 0x000000000042a2ad in tcp_free (conn=0x597fe0 <g_tcp_connections+384>) at tcp/tcp_conn.c:771
#3 0x000000000053bdc2 in tcp_close_disconnect (psock=0x7f58d1abbd80) at tcp/tcp_close.c:331
#4 0x000000000053bc69 in tcp_close (psock=0x7f58d1abbd80) at tcp/tcp_close.c:366
#5 0x000000000052eefe in inet_close (psock=0x7f58d1abbd80) at inet/inet_sockif.c:1689
#6 0x000000000052eb9b in psock_close (psock=0x7f58d1abbd80) at socket/net_close.c:102
#7 0x0000000000440495 in sock_file_close (filep=0x7f58d1b35f40) at socket/socket.c:115
#8 0x000000000043b8b6 in file_close (filep=0x7f58d1b35f40) at vfs/fs_close.c:74
#9 0x000000000043ab22 in nx_close (fd=9) at inode/fs_files.c:544
#10 0x000000000043ab7f in close (fd=9) at inode/fs_files.c:578
```
forget to update in this patch:
commit b02db04e00
Author: Xiang Xiao <xiaoxiang@xiaomi.com>
Date: Sun Jun 5 17:10:19 2022 +0800
arch/assert: Keep the thread dump column order same as ps
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
