In file included from /home/archer/code/nuttx/n4/incubator-nuttx/drivers/rc/lirc_dev.c:29:
drivers/rc/lirc_dev.c: In function 'lirc_raw_event':
drivers/rc/lirc_dev.c:959:14: warning: format '%u' expects argument of type 'unsigned int',
but argument 3 has type 'uint32_t' {aka 'long unsigned int'} [-Wformat=]
959 | rcinfo("delivering %uus %d to lirc\n", ev.duration, ev.pulse ? 1 : 0);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~
| |
| uint32_t {aka long unsigned int}
drivers/rc/lirc_dev.c:959:27: note: format string is defined here
959 | rcinfo("delivering %uus %d to lirc\n", ev.duration, ev.pulse ? 1 : 0);
| ~^
| |
| unsigned int
| %lu
Signed-off-by: chao.an <anchao@xiaomi.com>
The SPI2_CS_X and SPI2_SCK pins are used for connection to the LTE modem.
These pins are the special pins for the host interface that are set
automatically by latching the SYSTEM0/1 pins. So, it causes a problem
with increased current consumption when the modem is in power off state.
To prevent it, set these pins to GPIO HiZ during board initialization.
The free node is still in use after kasan_poison(), the node member
access will cause the assert report by kasan.
| (gdb) bt
| #0 kasan_report (addr=1743265406637584896, size=140737337053680, is_write=46) at kasan/kasan.c:97
| #1 0x0000555555607bdd in __asan_loadN_noabort (addr=140737272831420, size=4) at kasan/kasan.c:289
| #2 0x0000555555607cd7 in __asan_load4_noabort (addr=140737272831420) at kasan/kasan.c:323
| #3 0x00005555556061ef in gmtime_r (timep=0x7ffff3275dbc, result=0x7ffff3275e10) at time/lib_gmtimer.c:301
| #4 0x000055555560e507 in sim_rtc_rdtime (lower=0x55555576b780 <g_sim_rtc>, rtctime=0x7ffff3275e10) at sim/up_rtc.c:77
| #5 0x00005555555fcbdb in up_rtc_gettime (tp=0x7ffff3275ef0) at timers/arch_rtc.c:128
| #6 0x00005555555f08b4 in clock_systime_timespec (ts=0x7ffff3275ef0) at clock/clock_systime_timespec.c:72
| #7 0x00005555555ecc77 in note_common (tcb=0x7ffff31d2180, note=0x7ffff3275f80, length=21 '\025', type=18 '\022') at sched/sched_note.c:144
| #8 0x00005555555ed706 in sched_note_syscall_enter (nr=1, argc=0) at sched/sched_note.c:765
| #9 0x000055555560eb37 in __wrap_getpid () at wraps/WRAP_getpid.c:26
| #10 0x0000555555608d1c in mm_takesemaphore (heap=0x7ffff30ae000) at mm_heap/mm_sem.c:127
| #11 0x0000555555609477 in mm_free (heap=0x7ffff30ae000, mem=0x7ffff3265b80) at mm_heap/mm_free.c:89
| #12 0x00005555556070c5 in free (mem=0x7ffff3265b80) at umm_heap/umm_free.c:49
| #13 0x000055555560c3b0 in up_release_stack (dtcb=0x7ffff31e4b00, ttype=0 '\000') at sim/up_releasestack.c:67
| #14 0x00005555555f2515 in nxsched_release_tcb (tcb=0x7ffff31e4b00, ttype=0 '\000') at sched/sched_releasetcb.c:134
| #15 0x00005555556bdf0c in nxtask_terminate (pid=4, nonblocking=true) at task/task_terminate.c:184
| #16 0x00005555556bdb0f in nxtask_exit () at task/task_exit.c:168
| #17 0x000055555566e05f in up_exit (status=0) at sim/up_exit.c:64
| #18 0x000055555564f454 in _exit (status=0) at task/exit.c:78
| #19 0x000055555560ea89 in __wrap__exit (parm1=0) at wraps/WRAP__exit.c:27
| #20 0x00005555555eb288 in exit (status=0) at stdlib/lib_exit.c:54
| #21 0x00005555555fe2cc in nxtask_startup (entrypt=0x555555670c34 <critmon_start_main>, argc=1, argv=0x7ffff3265bb0) at sched/task_startup.c:70
| #22 0x00005555555f02a0 in nxtask_start () at task/task_start.c:134
| #23 0x0000000000000000 in ?? ()
Signed-off-by: chao.an <anchao@xiaomi.com>
1. about interval:
If interval is not set, generation is increased by 1 along with
publish and copy, multi-copy is continuous.
If interval is set, pick proper samples from buffer based on
mainline/user generation, multi-copy is one-by-one.
2. about bufferpos:
user->bufferpos always point to next position to check.
data user last read
----------v--------------------------
| | | |
-------------------^-----------------
bufferpos
If buffer is full, bufferpos point to buffer.head
Examples:
If a buffer contains 4 samples, newest generatoin is 40.
-------------------------------------
|10 |20 |30 |40
------------------------------^------
|
if user's next generation is 42, notify user to copy No.40 sample,
because 42 is closer to 40 than 50.
-------------------------------------
|10 |20 |30 |40
----------------------------------^--
|
if user's next generation is 48, do not notify user,
because 48 is closer to 50, which is next mainline sample.
Signed-off-by: jihandong <jihandong@xiaomi.com>
Signed-off-by: Jiuzhu Dong <dongjiuzhu1@xiaomi.com>
