sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
28,647 Commits 1 Branch 0 Tags 291 MiB
7a814ce1dc
Commit Graph

2169 Commits

Author SHA1 Message Date
Gregory Nutt
764f503150 Remove duplicate setting for SDIO_DMA from drivers/mmcsd/Kconfig 2017-02-06 13:16:52 -06:00
Gregory Nutt
3dbdb3bb31 CONFIG_SDIO_DMA: Was been defined in several low-level architecute Kconfig files, but used at the highest levels in the code. Both are bad and both are fixed with this commit 2017-01-31 11:52:00 -06:00
Gregory Nutt
2a4791f4ee Removed dmasupported() method from the SDIO interface. That is now a bit in the cpapability set. 2017-01-31 09:51:15 -06:00
Gregory Nutt
9ac00a355f Add capabilities() method to SDIO interface. Remove CONFIG_SDIO_WIDTH_D1_ONLY. That should not be a global propertie, but rather a capability/limitation of single slot when there may be multiple slots. 2017-01-31 09:16:01 -06:00
Gregory Nutt
a70ea9d3bc Typos withim mtd/ with Macronix MX25L. In NuttX/drivers/mtd/Make.defs letters X between M and 25 are missing. Noted by Oleg Evseev. 2017-01-30 07:26:38 -06:00
Alan Carvalho de Assis
c482437325 MMCSD_SDIO: Only wait for card ejected if card detection is supported 2017-01-26 07:44:17 -06:00
Gregory Nutt
ba2b345990 Remove a few remaining use of the obsolteted 'Compilation Switches' program section 2017-01-22 08:57:18 -06:00
Gregory Nutt
5e0c18b535 Merged in david_s5/nuttx/upstream_2_greg_ramtron (pull request #198) 
Adding missing CONFIG_ prefix
 2017-01-20 20:48:22 +00:00
David Sidrane
ca895b978b Adding missing CONFIG_ prefix 2017-01-20 10:45:50 -10:00
Gregory Nutt
08c001196b drivers/: Remove all explicit use of 'hidden' macro _info. Code must never use this directly. Code must always use a debug macro such as info which is basic on _info but can be appropriately filtered. 2017-01-15 13:00:50 -06:00
Gregory Nutt
2d9668fbd2 Fix a typo in a comment 2017-01-12 16:24:41 -06:00
Aleksandr Vyhovanec
bf528f2071 packed_struct replaced by begin_packed_struct and end_packed_struct 2017-01-09 14:17:49 +03:00
David Sidrane
548108764a BugFix:uart_ops_s portion of cdcacm will not be initalized with correct functions if CONFIG_SERIAL_DMA is lit. 
This fixes the issses in a C99 compatible way
 2016-12-17 04:29:41 -10:00
Gregory Nutt
4795d58e03 Back out most of 46dbbe837e. The order is correct -- or, rather, the order is the same as the order that response data is provided. Change the order will break all other drivers. 2016-12-15 07:16:24 -06:00
Gregory Nutt
ca92ecafa7 MMC/SD: Format changed from %d to %lu. Must cast argument to unsigned long to avoid crash on 64-bit machine. 2016-12-14 17:44:12 -06:00
Gregory Nutt
f4f32bc740 MMC/SD SDIO (again): This is really an endian-ness issue. Behavior should be different on big- vs little-endian machines. 2016-12-14 17:04:27 -06:00
Alan Carvalho de Assis
3c4a8d05b0 MMC/SD SDIO driver: Change the endianess order to read the return of long response command 2016-12-14 14:17:52 -06:00
Gregory Nutt
f063e4c5ac Remove Calypso architecture support and support for Calypso SERCOMM driver. 2016-12-13 18:35:52 -06:00
Gregory Nutt
d9e040d76b Remove all Calypso board configurations 2016-12-13 18:24:49 -06:00
Gong Darcy
44b7975a5e SSD1306: Fix errors in SPI mode configuration 2016-12-04 10:07:46 -06:00
Gregory Nutt
7467329a98 Eliminate CONFIG_NO_NOINTS. Lots of files changed -> lots of testing needed. 2016-12-03 16:28:19 -06:00
Gregory Nutt
ad3897531f C5471 Ethernet now supports CONFIG_NET_NOINTS 2016-12-03 12:17:55 -06:00
Gregory Nutt
43459fe75e DM09x0 Ethernet now supports CONFIG_NET_NOINTS 2016-12-03 11:42:15 -06:00
Gregory Nutt
eba1e076ec PIC32MX/Z Ethernet: Now supports CONFIG_NET_NOINT 2016-12-03 09:50:14 -06:00
Gregory Nutt
bfa1da14e2 LM3S Ethernet now supports CONFIG_NET_NOINTS 2016-12-03 08:32:49 -06:00
Gregory Nutt
c0cbea2550 Remove RGMP and RGMP drivers. 2016-12-02 09:49:33 -06:00
Janne Rosberg
8442bf66b9 usbhost_cdcacm: add CDC_SUBCLASS_ACM and CDC_PROTO_ATM to supported class and proto 2016-11-30 12:20:23 -06:00
Janne Rosberg
4b282f219a usbhost_composite: fix end offset in usbhost_copyinterface() 2016-11-30 12:18:23 -06:00
Gregory Nutt
96be43b270 drivers/net/: Adapt all Ethernet drivers to work as though CONFIG_NET_MULTIBUFFER were set. Remove all references to CONFIG_NET_MULTIBUFFER 2016-11-29 16:44:23 -06:00
Gregory Nutt
1793c1f8e1 Trivial, cosmetic change 2016-11-29 15:03:51 -06:00
Gregory Nutt
9ee3f3b933 sched_note: Permit spinlock and critical section notes in in-memory buffer iff sched_not_get() interfaces is disabled. 2016-11-28 18:36:26 -06:00
Gregory Nutt
d65be718c2 sched_note: Extend OS instrumentation to include some SMP events. 2016-11-27 17:14:57 -06:00
Gregory Nutt
0804286ad3 arch/: Add option to use low-priority work queue to all Ethernet drivers in arch that support CONFIG_NET_NOINTS. 2016-11-19 09:20:01 -06:00
Wolfgang Reißnegger
88539a7497 USBMSC: Fix length of mode6 sense reply packet. 2016-11-18 17:23:21 -08:00
Gregory Nutt
cdbc66addd Merge branch 'master' of bitbucket.org:nuttx/nuttx 2016-11-18 09:30:40 -06:00
Gregory Nutt
936b55f608 drivers/net: Add option to use low-priority work queue to all drivers in drivers/net. Not yet added to all architecture-specific network drivers. 2016-11-18 09:22:49 -06:00
Gregory Nutt
175ec43628 Merged in slorquet/nuttx/timerfixes (pull request #171) 
Timerfixes
 2016-11-18 14:45:36 +00:00
Gregory Nutt
52560bba37 ENC28J60: Allow either HP or LP work queue to be used. 2016-11-18 08:41:27 -06:00
Sebastien Lorquet
5363d0619a Fix warnings 2016-11-18 15:26:08 +01:00
Gregory Nutt
47b52a2633 Fix an error in manually bringing in Sebastien's changes; Update some comments. 2016-11-17 16:15:06 -06:00
Gregory Nutt
9acd57c819 Fix up some naming and update some comments. 2016-11-17 15:50:39 -06:00
Gregory Nutt
19c1c9d78b All timer lower half drivers. Port Sebastien's changes to all all other implementations of the timer lower half. Very many just and untested. Expect some problems. 2016-11-17 15:03:31 -06:00
Sebastien Lorquet
197cec58d2 timer driver: Use signal to notify of timer expiration. Add generic argument so that there can be additional usage. 2016-11-17 14:38:21 -06:00
Gregory Nutt
d4a048c0c6 Timer driver: Add hooks to support signal notification of timer expiration. Commented out because invasive interface changes would also be required to complete the implementation. 2016-11-17 12:41:11 -06:00
Gregory Nutt
ecb2d4cbc1 drivers/timer: Remove the TIOC_SETHANDLER IOCTL call. This calls directly from the timer driver into application code. That is non-standard, non-portable, and cannot be supported 2016-11-17 11:52:42 -06:00
Alan Carvalho de Assis
a6b7730f8c Add Vishay VEML6070 driver and support for STM32F103-Minimum board 2016-11-13 11:44:28 -06:00
Marc Rechté
58c2cd2843 drivers/ioexpander: Add some debug output. 2016-11-08 07:46:25 -06:00
Gregory Nutt
b0dffdc2ca Fix a number of header files with mismatched 'extern C {' and '}' 2016-11-05 07:25:05 -06:00
Gregory Nutt
6ff6cca1a0 Fix some mispellings of semaphore 2016-11-03 17:48:36 -06:00
Gregory Nutt
4fcbe8e410 drivers: Disable priority inheritance on all semaphores used for signaling 2016-11-03 11:00:47 -06:00
Gregory Nutt
47b043df1e drivers/serial.c: Make sure that priority inheritance is not enabled for the signaling semaphores used in the serial driver. 2016-11-03 08:16:59 -06:00
Paul A. Patience
d89765e1d0 spi: Fix Kconfig warning 
This commit moves the ARCH_HAVE_SPI options outside the check
for SPI. Those options don't depend on SPI, and Kconfig files
in arch/ enable them even if SPI isn't enabled.

Sourcing the driver's Kconfig in drivers/Kconfig only if
support for the driver is enabled prevents us from defining
these ARCH_HAVE options in the driver's Kconfig. We should
probably remove the other checks in drivers/Kconfig and check
if the drivers are enabled only in their Kconfig.
 2016-11-02 13:16:12 -04:00
Gregory Nutt
8dd2494407 Review of last PR: Fix return value (ERROR is not a value return value in this context). Fix some spacing. 2016-11-01 15:13:09 -06:00
Aleksandr Vyhovanec
be1626ad7b Added EEPROM timeout 2016-11-02 00:03:16 +03:00
Gregory Nutt
de6db52b52 Oops... Last commit had some garbage in the file 2016-10-24 15:36:11 -06:00
Gregory Nutt
3d4ce55ebd Oops.. a couple of hunks failed in the last patch. Hope I got them fixed correctly. 2016-10-24 15:25:40 -06:00
Max Nekludov
146d7e7921 drivers/net/tun.c: Fix bug in TUN interface driver 2016-10-24 15:17:01 -06:00
Max Kriegleder
77e5115e23 syslog: Fixes required for file syslog output 2016-10-19 08:27:20 -06:00
Janne Rosberg
847d2b4218 usbhost/composite: fix compile; missing semicolons 2016-10-18 11:52:23 -06:00
Janne Rosberg
72f13db4bf usbhost/enumerate: fix possible buffer overwrite 2016-10-18 08:15:19 -06:00
Gregory Nutt
6a0917ae7f Eliminate warnings 2016-10-06 07:44:17 -06:00
Gregory Nutt
2da3da7fd6 Costmetic changes from review of last commit 2016-09-25 17:24:39 -06:00
Gregory Nutt
0908a6c6b9 Fix calculations using MSEC_PER_TICK. If USEC_PER_TICK is less than 1000, then MSEC_PER_TICK will be zero. It will be inaccurate in any case. 2016-09-25 08:17:33 -06:00
Alan Carvalho de Assis
61980caee5 drivers/sensors: Adds support for the Sensixs XEN1210 3D-boar. This sensor is used on NANOSATC-BR2 a Brazillian CUBESAT project. 2016-09-16 12:45:53 -06:00
Gregory Nutt
de3e35f00a include/nuttx/modem: Move all modem-related IOCTL commands to a common file to assure that they will be unique 2016-09-16 09:39:51 -06:00
Aleksandr Vyhovanec
b0f973d901 MTD: SPI-based driver for Macronix MX25L3233F or MX25L6433F. 2016-09-02 11:00:04 -06:00
Aleksandr Vyhovanec
3f40541b21 MTD: Fixed cloned typos in several FLASH drivers. 2016-09-02 07:27:57 -06:00
Gregory Nutt
7f6a403b96 USB host composite is at least partially functional. No longer depends on CONFIG_EXPERIMENTAL 2016-09-02 07:26:29 -06:00
Gregory Nutt
e958c32e4d USB host composite: Using wrong interface number from interface descriptor. 2016-08-31 13:29:38 -06:00
Gregory Nutt
ebe829c4b9 USB host composite: A test should be <= not just < 2016-08-31 13:24:38 -06:00
Gregory Nutt
7ea9632592 Change the way that contactless IOCTL commands are defined. All IOCTL commands must be unique. 2016-08-31 11:30:22 -06:00
Gregory Nutt
4b0e8e56cf Add contactless/ directory to Documentation 2016-08-31 10:58:08 -06:00
Gregory Nutt
7b75a32ca1 Improve some comments 2016-08-31 08:16:12 -06:00
Gregory Nutt
cb7c1c1f14 USB host composite: Add an option to permit support only a subset of the composite intefaces. 2016-08-31 07:56:27 -06:00
Sebastien Lorquet
1d1affdd2b fix mfrc522 2016-08-31 13:46:27 +02:00
Sebastien Lorquet
d4048f3eeb CL fixes 2016-08-31 13:41:49 +02:00
Sebastien Lorquet
90568f9e8f Add CL make.defs 2016-08-31 13:25:21 +02:00
Sebastien Lorquet
e5ba71caf8 add cl kconfig 2016-08-31 13:24:19 +02:00
Sebastien Lorquet
3bf11c7203 Add contactless drivers, with renames 2016-08-31 13:20:53 +02:00
Sebastien Lorquet
3654b841bc Move contactless drivers to their own directory 2016-08-31 13:08:58 +02:00
Gregory Nutt
aa0d1868f5 USB host composite: Fix places where the wrong pointer was used; Add a test for an error condition. 2016-08-30 13:58:01 -06:00
Gregory Nutt
ac623abc7d USB host composite: Reosolves last remaining REVISIT design issues. Compiles clean with no errors and warning and is fully ready for testing. 2016-08-30 10:52:41 -06:00
Gregory Nutt
ee83e49f75 Update a comment 2016-08-29 15:43:11 -06:00
Gregory Nutt
1ce4db8008 USB host composite: Save some information that will be needed to create a class-specific configuration. 2016-08-29 15:02:15 -06:00
Gregory Nutt
f4f807100b Update comment 2016-08-29 14:55:03 -06:00
Alpo Leinonen
7d5173ca09 USB host composite: Several syntactic errors fixed 2016-08-29 07:53:57 -06:00
Gregory Nutt
43abb7cb3a Mark USB host compsite feature EXPERMENTAL; update ChangeLog 2016-08-28 14:51:55 -06:00
Gregory Nutt
31c364457a CLASS_CONNECT needs to be called for each member of the composite. 2016-08-28 08:48:40 -06:00
Gregory Nutt
58b45d64d7 Fix composite connect method. 2016-08-28 08:33:38 -06:00
Gregory Nutt
5d4428be93 Add check of class ID in device scriptor header 2016-08-27 10:53:43 -06:00
Gregory Nutt
c973e0d3ba Add the logic necessary to abstract the register lookup information for each candiate class 2016-08-27 10:31:18 -06:00
Gregory Nutt
2460d41ae0 Add more logic to the USB host composite wrapper. 2016-08-26 17:03:16 -06:00
Gregory Nutt
0860621e60 Fill one more case of 'Missing logic' in the USB host composite wrapper. 2016-08-26 12:34:58 -06:00
Gregory Nutt
3c0b287fe9 Fill in a little of the 'Missing logic' in the USB host composite wrapper. 2016-08-26 12:24:35 -06:00
Gregory Nutt
ea8ce7acb6 Trivial rename 2016-08-26 11:05:50 -06:00
Gregory Nutt
a228b0cc36 Add a little more meat to the still very USB host composite skeleton. Not quite so boney now. 2016-08-26 10:33:41 -06:00
Gregory Nutt
fa4e9e3c1c Add a little more meat to the still very bony USB host composite skeleton. 2016-08-26 10:13:35 -06:00
Gregory Nutt
579e338cd3 Add a little more meat to the USB host composite skeleton. Still pretty bony. 2016-08-26 09:47:38 -06:00
Gregory Nutt
8a1d6c9ed8 Basic framework that might be used to add USB host support 2016-08-26 09:07:52 -06:00
Gregory Nutt
c51b642f81 Fix some driver return values. If sem_wait fails, the errcode is in errno, not the return value. 2016-08-25 07:15:59 -06:00