to ensure the generated key is unique from each other since only
root pseduo file system really support st_ino field after:
commit d35fbf534d51f7ef72382d9666a1f19e07c6f00f
Author: Xiang Xiao <xiaoxiang@xiaomi.com>
Date: Fri Sep 16 14:24:55 2022 +0800
fs: Allocate unique serial number for the root pseduo file system node
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Summary:
- Because a context switch issue still exists with FPU
the configs should be removed until it works.
Impact:
- None
Testing:
- Tested with ostest
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
1. separate command catagory of bt/pktradio from wireless ioctl
2. Remove commoand count limit to support vendor command
Signed-off-by: chao an <anchao@xiaomi.com>
documentation: Fixed typos in ESP32 Secure Boot section
documentation/esp32: Improved note about the MCUboot port
documentation/esp32: Improved instructions in Secure Boot section
documentation/esp32: Fix information in Secure Boot section
documentation/esp32: Added info in Secure Boot section
documentation/esp32: Fix Secure Boot Instructions
Otherwise, after the rx error occur, the tx output will be
out of sequence, for example:
normal log:
[ 30.163000] 12345678abcdefgh
[ 30.666000] 12345678abcdefgh
[ 31.169000] 12345678abcdefgh
[ 31.672000] 12345678abcdefgh
[ 32.175000] 12345678abcdefgh
[ 32.678000] 12345678abcdefgh
[ 33.181000] 12345678abcdefgh
error log:
he 7 .20]0003 127456c8abgdefch
gde [6.707002] 16345b78afcde
fcde
fghe10010] 5234a678ebcd
77 713 00]41238567dabchefgd
che 7 .21]0003 127456c8abgdefch
gde [8.709002] 16345b78afcde
fcde
Signed-off-by: wangbowen6 <wangbowen6@xiaomi.com>
Since tlsr arch support A/B bank, the hardware support
relative addr to load or store, but for flash read,
must use absolute addr. also combine with flash_<*>_method.
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
Fix Compile error from Armclang compiler(AC6):
Error: L6218E: Undefined symbol arm_vectoraddrexcption (referred from arm_vectoraddrexcptn.o).
Signed-off-by: chao an <anchao@xiaomi.com>
undeclare TCGETS on esp32c3 when enable usbserial and termios
error:
chip/esp32c3_usbserial.c: In function 'esp32c3_ioctl':
chip/esp32c3_usbserial.c:411:10: error: 'TCGETS' undeclared (first use in this function)
Situation:
Assume we have 2 cpus, and busy run task0.
CPU0 CPU1
task0 -> task1 task2 -> task0
1. remove task0 form runninglist
2. take task1 as new tcb
3. add task0 to blocklist
4. clear spinlock
4.1 remove task2 form runninglist
4.2 take task0 as new tcb
4.3 add task2 to blocklist
4.4 use svc ISR swith to task0
4.5 crash
5. use svc ISR swith to task1
Fix:
Move clear spinlock to the end of svc ISR
Signed-off-by: ligd <liguiding1@xiaomi.com>
* net/netdev/netdev_ioctl.c:
(netdev_ifr_ioctl): The ioctl SIOCGIFHWADDR provides the hardware
address (e.g., Ethernet MAC, etc.) of a network interface. It is
based on Linux. (BSD-based systems don't have this ioctl.) The Linux
implementation sets sa_family to ARPHRD_ETHER for Ethernet and IEEE
802.11 interfaces [1]. NuttX was setting it to NET_SOCK_FAMILY for
these interface types as well as 6LoWPAN and PKTRADIO; this was
incorrect and also the value of NET_SOCK_FAMILY varies based on
Kconfig settings. Correcting this to ARPHRD_ETHER for Ethernet and
IEEE 802.11 and ARPHRD_IEEE802154 for 6LoWPAN and PKTRADIO.
References:
[1] 'man 7 netdevice' on Linux.
* net/netdev/netdev_ioctl.c:
(netdev_ifr_ioctl): The ioctl SIOCSIFHWADDR sets the hardware address
(e.g., Ethernet MAC, etc.) of a network interface. Radio devices may
have different lengths of hardware addresses, such as
NET_6LOWPAN_EADDRSIZE (8), NET_6LOWPAN_SADDRSIZE (2), or
RADIO_MAX_ADDRLEN (8). Also, Kconfig CONFIG_PKTRADIO_ADDRLEN allows
the user to set any arbitrary size. Note that while the sister ioctl
SIOCGIFHWADDR "get hardware address" copies
`dev->d_mac.radio.nv_addrlen` bytes, SIOCSIFHWADDR was copying
NET_6LOWPAN_ADDRSIZE bytes unconditionally. Depending on which radio
is used, this could be incorrect. Fixing it to use
`dev->d_mac.radio.nv_addrlen` for SIOCSIFHWADDR as well. Also adding
DEBUGASSERT to ensure this is within bounds of source and
destination of the copy.
Add support for MCUBoot.
Two new configurations are added:
- mcuboot-loader: mcuboot-loader app used as a bootloader.
main_mcuboot_loader as entrypoint
- mcuboot-app: used as mcuboot agent app. Needs to be
signed manually through "imgtool sign --pad --align 4 -v 0 -s
auto -H 0x200 --pad-header -S 0xc0000 nuttx.hex nuttx_sign.bin"
Signed-off-by: Andres Sanchez <tito97_sp@hotmail.com>
