This adds NuttSBI support for rv-virt device so that to enable CI
checks for NuttSBI later. It allows using `-bios nuttx` option to
run NuttX with QEMU v6.2 w/o OpenSBI.
Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
HPET can be used as system clock for x86_64
to set HPET as system clock you have to enable:
CONFIG_ONESHOT=y
CONFIG_ALARM_ARCH=y
CONFIG_INTEL64_ONESHOT=y
CONFIG_ARCH_INTEL64_HPET_ALARM=y
Signed-off-by: p-szafonimateusz <p-szafonimateusz@xiaomi.com>
The ESP32-S3-Korvo-2 is a multimedia development board based on the
ESP32-S3 chip. It is equipped with a two-microphone array which is
suitable for voice recognition and near/far-field voice wake-up
applications. The board integrates multiple peripherals such as
LCD, camera, and microSD card. It also supports JPEG video stream
processing. With all of its outstanding features, the board is an
ideal choice for the development of low-cost and low-power
network-connected audio and video products.
Provide `up_copy_section` function that enables copying data using
the data bus. If the memory destination address is accessible
through the instruction bus, the data is copied using the
correspondent address accessible through the data bus.
The buffer initialization function (`i2s_buf_initialize`) calls
`i2s_buf_free`, which performs buffer initialization within a
critical section (`spin_lock_irqsave`). If this function is called
under the same critical section (same spinlock), initialization
will hang.
This change implements a driver for the two watchdog timers on the BL808, and enables it as part of the timer config. The driver is based on the GP timer driver.
arch/xtensa: add support for capture driver on ESP32 and ESP32|S3|
Squashed:
Initial settings for MCPWM Capture on board level
Created lower half files - compilation ok
Using capture debug features. Simple example on fops works
Successful duty and freq calculation
Documentation update
Fixed and added interupt capabilities for all 3 capture channels
Cleaned defconfig
Renamed macros, added S3 options and moved arch source to common dir
Added support for ESP32S3
Added capture example to defconfig and renamed
Basic bring up ready. New Kconfig options for motor.
Good motor registration
Working on enabling pwm generators
Working on enabling pwm generators
Added fops functions
Success on PWM 50%
stable pwm operation for bdc
Added loopback option for testing
Improved rules on fsm
Working motor direction control
Testing new ISR for fault handling
Issues on fault ISR
Removed fault implementation (not working)
Added support for esp32s3
Documentation improvements
Added default motor spin direction
Added parameter change while running
Review fixes
arch/xtensa: add support for fault signal on motor control
Squashed:
Initial settings for MCPWM Capture on board level
Created lower half files - compilation ok
Using capture debug features. Simple example on fops works
Successful duty and freq calculation
Documentation update
Fixed and added interupt capabilities for all 3 capture channels
Cleaned defconfig
Renamed macros, added S3 options and moved arch source to common dir
Added support for ESP32S3
Added capture example to defconfig and renamed
Basic bring up ready. New Kconfig options for motor.
Good motor registration
Working on enabling pwm generators
Working on enabling pwm generators
Added fops functions
Success on PWM 50%
stable pwm operation for bdc
Added loopback option for testing
Improved rules on fsm
Working motor direction control
Testing new ISR for fault handling
Issues on fault ISR
Removed fault implementation (not working)
Added support for esp32s3
Documentation improvements
Added default motor spin direction
Added parameter change while running
Got responsive fault indicator
Working brakes - still need to work on starting isr
Fixed single-time ISR initializiation
Working soft brake on fault
Improved KConfig for BDC and BLDC
Kconfig fixed at board level
nucleo-f4229zi board does not come with external ram.
Looking at netnsh config, these changes are also not present.
Issue found when registering i2c char driver for i2ctool. zalloc
returned -ENOMEM
This revises FLAT build ld.script so that to use CONFIG_RAM_START
instead of hard coded address to increase flexibility.
Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
This allows virtio devices to be probed upon board_early_init, thus
making virito-serial ready earlier for console use.
Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
- This PR adds the LED Driver for QEMU RISC-V 32-bit and 64-bit (User LEDs and Auto LEDs)
- QEMU RISC-V LED Driver will be used by the Rust Blinky App for Google Summer of Code
- Blinking the LED is probably the most common Embedded Demo, and now it's supported by QEMU RISC-V
- We added NuttX Configs `rv-virt:leds` and `rv-virt:leds64` to support User LEDs for 32-bit and 64-bit RISC-V
- Turning on/off a Simulated User LED will print a log message: "LED 1 set to 1"
- The code is derived from NuttX PinePhone LED Driver
This driver implements `read`, `write`, `open`, `close` and `ioctl`
interfaces to the SHT4X temperature and humidity sensor on an I2C bus.
The read implementation is that of a character driver for easy
debugging, while `ioctl` provides an interface to the sensor's raw data
collection and heating functionality.
This adjusts canmv230 `master` and `remote` configs to support both
k230 and k230d devices and drop unused items.
Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
Fix https://github.com/apache/nuttx/issues/12712
If run nsh over usb based serial port, the default stack size is too small,
for example simple `ps` command will use more than 2208 bytes stack.
Then the stack overflow will happen and the system will hang here.
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
This revises canm230:pnsh in a few ways:
- adjusting linker scripts structure,
- asserting PMP setting results,
- adjusting configs for both k230d and k230 devices.
Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
This adds enablers for setting various clocks to some default
values. Also, this provides helpers to grant nonsecure access
to a number of clocks. Bootloader may utilize these to make
the system boot in a deterministic manner.
Signed-off-by: Eero Nurkkala <eero.nurkkala@offcode.fi>
based on esp32s3-devkit:toywasm, tailored for the espressif fork
of qemu. [1]
* disabled a few things for which emulation doesn't seem available:
* wifi
* spiram
* ESP32S3_SYSTEM_BBPLL_RECALIB
* enabled DEBUG_SYMBOLS for my convenience (thus _debug suffix)
* enabled hostfs for my convenience
tested with:
qemu-xtensa-softmmu-esp_develop_9.0.0_20240606-x86_64-apple-darwin.tar.xz
[1] https://github.com/espressif/qemu
This commit implements a character driver for the general purpose ADC of the BL808, based on the hardware scanning functionality. The driver supports setting different conversion resolutions and the order of channels to be scanned via menuconfig.
The Simple Boot feature for Espressif chips is a method of booting
that doesn't depend on a 2nd stage bootloader. Its not the
intention to replace a 2nd stage bootloader such as MCUboot and
ESP-IDF bootloader, but to have a minimal and straight-forward way
of booting, and also simplify the building.
This commit also removes deprecated code and makes this bootloader
configuration as default for esp32 targets and removes the need
for running 'make bootloader' command for it.
Signed-off-by: Almir Okato <almir.okato@espressif.com>
Move and unify map_rom_segments function called when starting
Simple Boot and MCUboot compatible images.
Signed-off-by: Almir Okato <almir.okato@espressif.com>
- This PR adds the LED Driver for Ox64 Board (User LEDs and Auto LEDs)
- Ox64 LED Driver will be used by the Rust Blinky App for Google Summer of Code
- User LED 1 is configured for GPIO 29. Other User LEDs and Auto LEDs shall be configured by the NuttX Dev.
- The code is derived from NuttX PinePhone LED Driver
This revises ld-nuttsbi.script for easier use. It also adjusts
canmv230/nsbi to fit both k230d and k230 devices.
Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
Squashed:
Initial settings for MCPWM Capture on board level
Created lower half files - compilation ok
Using capture debug features. Simple example on fops works
Successful duty and freq calculation
Documentation update
Fixed and added interupt capabilities for all 3 capture channels
Cleaned defconfig
Renamed macros, added S3 options and moved arch source to common dir
Added support for ESP32S3
Added capture example to defconfig and renamed
This commit modifies the existing serial driver to add support for the remaining UARTs on the BL808. It also introduces support for setting baud rate, character length, stop bits, parity, flow control and which serial port acts as the console.
This change implements a system for allowing the D0 core (which runs NuttX) to receive forwarded interrupts from the M0 core. This makes it possible for drivers that rely on interrupts to work with peripherals attached to the M0 core.
As suggested in PR:12530, changed the default names of ESP32S3WROOM chips to ESP32S3WROOM1N4,
ESP32S3WROOM2N16R8, ESP32S3WROOM2N32R8, ESP32S3MINI1N8.
Also regenerated all the defconfigs for board configurations.
Added a custom ESP32S3 module for custom flash configurations.
Declared ESP32S3_PSRAM_8M variable with prompt
This PR adds support for Milk-V Duo S 64-bit RISC-V SBC, based on SOPHGO SG2000 SoC (T-Head C906 Core). Most of the code is derived from NuttX for Ox64 BL808. The source files are explained in the articles here: https://github.com/lupyuen/nuttx-sg2000
Modified Files:
`boards/Kconfig`: Added Milk-V Duo S board
`arch/risc-v/src/sg2000/sg2000_timerisr.c`: Fixed MTIMER_FREQ for sleep() to work correctly
New Files in boards/risc-v/sg2000/milkv_duos:
`src/sg2000_appinit.c`: Startup Code
`include/board.h`: Milk-V Duo S Definitions
`include/board_memorymap.h`: Memory Map
`src/etc/init.d/rc.sysinit`, `rcS`: Startup Script
`src/.gitignore`: Ignore the tmp filesystem
`scripts/ld.script`: Linker Script
`scripts/Make.defs`: Milk-V Duo S Makefile
`src/Makefile`: Milk-V Duo S Makefile
`Kconfig`: Milk-V Duo S Config
`configs/nsh/defconfig`: Build Config for `milkv_duos:nsh`
Updated Documentation:
`platforms/risc-v/sg2000/index.rst`: New page for SOPHGO SG2000 SoC
`platforms/risc-v/sg2000/boards/milkv_duos/index.rst`: Building and booting NuttX for Milk-V Duo S
There is no need to use kernel build for S-mode all the time. As cpu
scratch is supported for non kernel mode build, it is possible to use
flat build for S-mode.
Add flat build support for risc-v S mode.
Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
* arch/risc-v/src/common/Toolchain.defs
arch/xtensa/src/lx6/Toolchain.defs
arch/xtensa/src/lx7/Toolchain.defs
- Define SHMODULEFLAGS etc. for sotest/dynload
- Add --entry=__start to SHMODULEFLAGS
* boards/arm64/qemu/qemu-armv8a/scripts/Make.defs
boards/sim/sim/sim/scripts/Make.defs
- Define SHMODULEFLAGS etc. for sotest/dynload
