Selecting this option will pass "-Map=$(TOPDIR)$(DELIM)nuttx.map" to ld
when linking NuttX ELF. That file can be useful for verifying
and debugging magic section games, and for seeing which
pieces of code get eliminated with DEBUG_OPT_UNUSED_SECTIONS.
Signed-off-by: chao.an <anchao@xiaomi.com>
Enable this option to optimization the unused input sections with the
linker by compiling with " -ffunction-sections -fdata-sections ", and
linking with " --gc-sections ".
Signed-off-by: chao.an <anchao@xiaomi.com>
When enable DEBUG_TCBINFO config, a global struct will
provide, then debuggers can aware nuttx task infomation.
Signed-off-by: zhuyanlin <zhuyanlin1@xiaomi.com>
Add AES cypher support to the ALLOW_BSD help
This change will increase awareness on which components
are disabled by the ALLOW_BSD menu
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
If ALLOW_BSD_COMPONENTS is not enabled in the license setup,
Bluetooth LE support will be disabled
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
This commit will add a build option to enable BSD code in License setup.
NOTE: When this option is enabled components with BSD licenses can be
added to the build. Please make sure that the licenses match your
project.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
This commit will add License setup as a barrier for non Apache/BSD/MIT
code.
NOTE: When this option is enabled components with GPL licenses can be
added to the build. Please make sure that the licenses match your
project.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Select debug.h which may be under include/arch or include/arch/chip.
Signed-off-by: liuhaitao <liuhaitao@xiaomi.com>
Change-Id: I5f465c41ba27d040e5e24b2eef2918cfbc18a0bd
N/A
Cause lots of apps who use external library needs big stack size.
e.g. alsa, ffmpeg
Change-Id: I3b46333da9b18d103ea2ea71ed6e81d79a2d1d6c
Signed-off-by: ligd <liguiding1@xiaomi.com>
This works by having the build system look for nuttx/external/Kconfig
to determine whether this directory is present or not. nuttx/external
is gitignored in order to be added by the final user but not to be
commited into the repo. Tipically this will by a symbolic link, just like
apps/external.
Inside external/ a Makefile should be placed with the same structure
than any nuttx/ subdirectory (eg: nuttx/drivers/). The
nuttx/external/Kconfig will be sourced and any options defined there will
appear at the bottom of menuconfig (unless options are conditioned on
menus, in which case they will appear accordingly).
The purpose is to allow arch/board independent code, which for any
reason is not to be upstreamed (propietary, not relevant for mainline,
testing, etc), to be built into the OS during OS building stage. This
way the user does not need to fork the NuttX repo to do so. This feature
complements well with external apps and custom board support.
and enable on sim as a demo. Here is the paper:
ftp://gcc.gnu.org/pub/gcc/summit/2003/Stackguard.pdf
Signed-off-by: qiaowei <qiaowei@xiaomi.com>
Change-Id: I1926936328dad54eee16b322dcaad0b42f9c4a62
* The appropriate size of stack varies among archs.
E.g. for 64-bit sim, 2048 is way too small, especially when the task
happens to use host OS functionalities.
I plan to allow an arch provide its own default.
* I plan to use this to replace hardcoded "STACKSIZE = 2048" in APPDIR.
Author: Gregory Nutt <gnutt@nuttx.org>
net/tcp: Fix errors found in build testing.
Recent re-organization moved some functions from net/inet to net/tcp and net/udp. This include references to nxsem_wait(), SEM_PRIO_NONE, and other internal NuttX semaphore functions. These all failed to compile because nuttx/semaphore.h was not included in any of the files.
Kconfig: the CONFIG_WINDOWS_NATIVE options now depends on CONFIG_EXPERIMENTAL. The Windows native build is complete and available, but not often used or verified. As a consequence, it cannot be assured to be fully functional at any given time. Hence, it is marked here as EXPERIMENTAL so that the end user will be aware of this state.
boards/arm/stm32/stm32f4discovery/configs/winbuild/defconfig: Add CONFIG_EXPERIMENTAL to the windbuild configuration. It is now necessary for this configuratino to be a viable test configuration.
Co-authored-by: Gregory Nutt <gnutt@nuttx.org>
This change was motivated by the presence of the mkimage.sh file under tools. That is the tool that created the RRLOAD binary format. That bash script has a GPL license and, hence, may not be included in an Apache-licensed project.
This port was effort of a number of people, I rather arbitrarily gave authorship to Guiding Li because he has the largest number of fundamental quashed commits from the Xiamoi repository.
Squashed commit of the following:
Author: Xiang Xiao <xiaoxiang@pinecone.net>
include/nuttx/b2c.h and libx/libc/string: Add non-standard string functions to deal with cases where there are more than 8-bits in a type char.
Author: Gregory Nutt <gnutt@nuttx.org>
Fix several build issues/missing definitiona needed for OpenAMP build in drivers/.
Add OpenAMP code has been reviewed and ran through tools/nxstyle (with all reports accounted for).
Author: Xiang Xiao <xiaoxiang@xiaomi.com>
tools/: Fix the minor issue in Makefile
Author: Gregory Nutt <gnutt@nuttx.org>
drivers/rptun/rptun.c: Review for coding standard. Run against tools/nxstyle.
tools/LibTargets.mk: Fix some TABs that were turned into spaces by a copy-paste.
fs/hostfs: Add configure and build support for hostfs RPC.
drivers/timer: Add configure and build support for syslog RTC.
drivers/syslog: Add configure and build support for syslog RPC.
drivers/serial: Add configure and build support for serial RPC.
Kconfig, tools/*.mk. openamp/: Add basic OpenAMP build support.
drivers/rptun: Add configure and build support for OpenAMP tunnel drivers.
drivers/net: Update Make.defs and Kconfig for OpenSDA support.
Remove drivers/clk/clk-rpmsg.c drivers/power/rpmsg_regulator.c. These depend on upstreaming support for a new subsystem based on the clk/regulator is model from Linux. Removed because we want to separate the activities. We will just try to get the basic OpenAMP support in place for now.
Remove drivers/misc/misc_rpmsg.c and include/nuttx/misc/misc_rpmsg.h. These are specific to the Xiaomi application.
Author: zhuyanlin <zhuyanlin@pinecone.net>
This commit brings in the OpenAMP OS driver/RPC components from https://github.com/FishsemiCode/nuttx. Initial commit is source files only. Additional changes to Kconfig and Make.defs files still needed.
Author: Jianli Dong <dongjianli@pinecone.net>
This commit brings in the OpenAMP OS driver/RPC components from https://github.com/FishsemiCode/nuttx. Initial commit is source files only. Additional changes to Kconfig and Make.defs files still needed.
Author: Guiding Li <liguiding@pinecone.net>
This commit brings in the OpenAMP OS driver/RPC components from https://github.com/FishsemiCode/nuttx. Initial commit is source files only. Additional changes to Kconfig and Make.defs files still needed.
Move boards to boards folder
* boards: rename configs folder to boards
This is the proposed layout after the change:
boards: - folder containing board folders
<board>: - name of each board
drivers: - extra drivers specific for platform
include: - header files for the boars
scripts: - extra scripts specific for platform
src: - board specific code
tools: - extra tools specific for platform
<config>: - board specific configuration(s)
Note:
<xxx> names are dependent on platform
This is a logical change to aim to the arch layout but this is a
huge change it should be done in several steps to lower the risk.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* Kconfig: replace configs with boards
The change is needed after the path change
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* Makefile: replace configs with boards
The change is needed after the path change
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* Makefile.*: replace configs with boards
The change is needed after the path change
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* Make.defs: replace configs with boards
The change is needed after the path change
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* .sh: replace configs with boards
The change is needed after the path change
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* .mk: replace configs with boards
The change is needed after the path change
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* .c & .h: replace configs with boards
The change is needed after the path change
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* .bat: replace configs with boards
The change is needed after the path change
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Approved-by: Gregory Nutt <gnutt@nuttx.org>
Mastertools: add spk binary format and entry point for mpy
* tools: add spk binary format
The .spk binary format is used on spresense and other boards
based on the cxd56 arch.
to enable this binary format please set in your config
CONFIG_CXD56_BINARY=y
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* configs: spresense: buils nuttx.spk images
Enable nuttx.spk binary image that can be flashed on spresense board.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* configs: spresense: add entry point for mpy
The entry point is needed for the downstream projects based
on spresense.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Approved-by: Gregory Nutt <gnutt@nuttx.org>
Author: Xiang Xiao <xiaoxiang@xiaomi.com>
arch/arm/src/armv7-m: Implement SYSTICK timer driver
Author: anchao <anchao@pinecone.net>
configs/sim/loadable: Add loadable demo for arch sim
sched/init: Restore previously reverted option to mount block device for INIT_FILEPATH case
configs/stm3240g-eval/knxwm: Fix build breakage.
Author: Gregory Nutt <gnutt@nuttx.org>
configs: With recent changes to apps/ all configurations that build applications as modules must now also select CONFIG_APPS_LOADABLE.
Author: anchao <anchao@pinecone.net>
configs/sim/loadable: Add loadable demo for arch sim
Kconfig and tools/Makefile.unix and : add dynamic application loadable support
Squashed commit of the following:
libs/libxx: Fix some confusing in naming. If the directory is called libxx, then the library must be libxx.a (unless perhaps LIBCXX is selected).
libs/: Fix paths in moved library directories.
libs: Brute force move of libc, libnx, and libxx to libs. Cannot yet build it in that configuration.
Squashed commit of the following:
libnx: Need to duplicate some Kconfig setting for NXFONTs if it can be configured and built independently of NX. Also includes some build-related fixes.
configs/sim: Disable NX graphics support in the fb configuration.
libnx: Basic configuration and build changes to support building font support independend of the NX server.
