sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
26,528 Commits 1 Branch 0 Tags 291 MiB
7bca86fa31
Commit Graph

9474 Commits

Author SHA1 Message Date
Michał Łyszczek
81df56086a Fix bad pllmul values for stm32f1xx connectivity line. 
stm32f1xx connectivity line supports only x4, x5, x6, x7, x8, x9 and x6.5 values
 2016-08-11 10:49:57 +02:00
Stefan Kolb
899a8aa2f0 SAMV7 TRNG: Missing endif. 2016-07-25 12:30:39 -06:00
Gregory Nutt
e895e19b9f Minor changes from review of last PR 2016-07-24 07:45:46 -06:00
Wolfgang Reissnegger
c0fa319f2b SAM3/4 UDP: Fix handling of endpoint RX FIFO banks. 
This fixes a race condition where the HW fills a FIFO bank while the SW is
busy, resulting in out of sequence USB packets.
 2016-07-23 20:11:04 -07:00
Wolfgang Reissnegger
cc191a977d SAM3/4 UDP: Remove redundant EP state assignment. 2016-07-23 20:11:03 -07:00
Wolfgang Reissnegger
f3a6a40f62 SAM3/4 Serial: Fix warning when CONFIG_SUPPRESS_UART_CONFIG is set. 2016-07-23 16:23:49 -07:00
Gregory Nutt
9b9b721406 Rename alarm_enable to rtc_alarm_enabled; mark inline 2016-07-23 12:01:57 -06:00
Gregory Nutt
5a0f9fcb7d Fix STM32 RTC Alarm interrupts. They were being enabled BEFORE the interrupt system was being initialized. 2016-07-23 10:36:06 -06:00
Gregory Nutt
14de4b99f8 Simplify some computations 2016-07-23 08:13:25 -06:00
Gregory Nutt
0984fcda44 Back out last RTC alarm changes. I am mistaken, the interrupts are enabled by stm32[l4]_exti_alarm(). 2016-07-23 07:53:08 -06:00
Gregory Nutt
65ac11692d STM32L4 RTC is cloned from F4; needs same fix. 2016-07-23 07:33:44 -06:00
Gregory Nutt
829c5610da STM32 F4 RTC ALARM: Was not enabling interrupts. 2016-07-23 07:19:14 -06:00
Gregory Nutt
e6137ff129 Rename SAMD/L version of CONFIG_GPIO_IRQ to CONFIG_SAMDL_GPIOIRQ 2016-07-22 14:38:33 -06:00
Gregory Nutt
3aea9b8bf3 Rename KL version of CONFIG_GPIO_IRQ to CONFIG_KL_GPIOIRQ 2016-07-22 14:34:21 -06:00
Gregory Nutt
5386403476 Rename Kinetis version of CONFIG_GPIO_IRQ to CONFIG_KINETIS_GPIOIRQ 2016-07-22 14:30:37 -06:00
Gregory Nutt
264578135d Rename LP11xx version of CONFIG_GPIO_IRQ to CONFIG_LPC11_GPIOIRQ 2016-07-22 14:23:31 -06:00
Gregory Nutt
360efe03c1 Rename LP17xx version of CONFIG_GPIO_IRQ to CONFIG_LPC17_GPIOIRQ 2016-07-22 14:18:30 -06:00
Gregory Nutt
369c942605 uint8_t is big enough for global. Range of values only 2-10 2016-07-21 15:18:27 -06:00
Gregory Nutt
67900beaaa LP43 Heap: REALLY eliminate the warning this time 2016-07-21 15:15:56 -06:00
Gregory Nutt
d5acc120a4 Kinetis K60: Fix some bad conditional compilation 2016-07-21 14:22:00 -06:00
Gregory Nutt
a2035f7efd Move include/nuttx/1wire.h to include/nuttx/drivers/1wire.h 2016-07-21 13:51:28 -06:00
Gregory Nutt
96d5b734a8 Add missing TWI definitions 2016-07-21 08:01:59 -06:00
Gregory Nutt
0d98507af1 Eliminate a warning 2016-07-20 16:47:23 -06:00
Gregory Nutt
1b9b3a7b47 pwm.h moved from include/nuttx/ to include/nuttx/drivers. 2016-07-20 13:48:24 -06:00
Gregory Nutt
ddcaa3d425 can.h moved from include/nuttx/ to include/nuttx/drivers. 2016-07-20 13:38:36 -06:00
Gregory Nutt
4b4dbc79a2 Move driver related prototypes out of include/nuttx/fs/fs.h and into new include/drivers/drivers.h 2016-07-20 13:15:37 -06:00
Sagitta Li
e07bd757ba STM32 F107: TIM8 not supported in F105/F107 2016-07-20 08:51:03 -06:00
Vytautas Lukenskas
ac2a5e079c Add change missing in Make.defs for last LPC43xx change 2016-07-19 09:28:15 -06:00
Vytautas Lukenskas
f222d37aa7 Extend LPC43xx EMC code to support SDRAM on a dynamic memory interface. 2016-07-19 07:11:04 -06:00
Gregory Nutt
2119c5ce19 Fix another function naming error 2016-07-18 12:40:27 -06:00
Gregory Nutt
d36da2b560 Fix bad dev[u]random_register() function return value. 2016-07-18 12:25:05 -06:00
Gregory Nutt
d5388eca05 devrandom_register() must be called before devurandom_register() 2016-07-18 11:24:04 -06:00
Gregory Nutt
078bbe5e5c All H/W RNG Drivers: Can now be configured to register as /dev/random and/or /dev/urandom 2016-07-18 11:10:37 -06:00
Gregory Nutt
1660329d06 Rename up_rnginitialize to devrandom_register 2016-07-18 10:55:37 -06:00
David Alessio
6cefbc0c3f This change provides an option to add /dev/urandom to all architectures. The pseudo-random algorithm I choose strikes an arguably-good balance between being "random" and small/fast enough for 8/16 bit MCUs. It’s the well-documented xorshift128 algorithm. It has an internal state of 128 bits that can be [re-]seeded with a write. 2016-07-17 06:42:26 -06:00
Gregory Nutt
7b298a828d up_pminitialize() needs to be called from instances of up_initialize() 2016-07-15 13:11:28 -06:00
Gregory Nutt
d3b3c71d97 All architectures: Add logic to automatically register /dev/ptmx a boot time 2016-07-15 11:54:41 -06:00
Young
7005fafb95 Fix a bug of tiva i2c ports configuration 2016-07-15 11:03:48 +08:00
Gregory Nutt
18059d6821 Restore Wolfgang Reissnegger's PR as submitted. My mistake is it late here. 2016-07-14 18:39:51 -06:00
Wolfgang Reissnegger
f982180ec7 SAM3/4 Timer: Remove broken definitions for BMR register. 
Per documentation SAM4S and SAM4E have the BMR register values
as they are already defined. No need for chip specific values.

In addition:
 - CONFIG_ARCH_CHIP_SAM4s has wrong lower case 's' so the definitions would
   not be used anyways for SAM4S builds.
 - TC_BMR_TC2XC2S_TIOA2 does not make sense. There is no way to loop back
   TC2's TIOA2 into itself.
 2016-07-14 18:17:05 -06:00
Gregory Nutt
54bc6c88dd Fix cast of return value 2016-07-14 10:21:31 -06:00
Gregory Nutt
3f6835fda9 If CONFIG_SPIFI_SECTOR512 undefined, lpc43_bwrite doesn't do actual write (probably copy/paste errors). Still not sure about current state of lpc43_spifi implementation, but for me NXFFS works with this patch. From Vytautas Lukenskas. 2016-07-14 10:11:19 -06:00
Pierre-noel Bouteville
76f12b1f69 I'm using syslog through ITM. In this case syslog_channel function is call before ram initialisation in stm32_clockconfig. But syslog channel uses a global variable that is reset to default by the RAM initialization. 2016-07-14 07:29:39 -06:00
Gregory Nutt
72582b61d9 Merged in ziggurat29/nuttx/stm32l4_smartfs_test (pull request #98) 
port foward bugfix from stm32 of oneshot timer
 2016-07-13 16:09:18 -06:00
ziggurat29
9a6c5b271a port foward bugfix from stm32 of oneshot timer 2016-07-13 17:00:06 -05:00
Gregory Nutt
37e10a54ae Kinetis: Eliminate a warning. Freedom-K64F: Update a README file 2016-07-13 15:38:47 -06:00
Max Neklyudov
067f63fc18 STM32: Fix bug in oneshot timer 2016-07-13 10:20:38 -06:00
Stefan Kolb
f673b2d02a This commit solves a problem which causes data loss while sending data via USB. This problem is caused by an incorrect handling of the endpoint state in the USB driver sam_usbdevhs. This leads under some circumstances to situations in which an DMA transfer is setup while a previous DMA transfer is currently active. Amongst other things I introduced the new endpoint state USBHS_EPSTATE_SENDING_DMA for the fix. 
To reproduce the problem, I used a program which send as many data as possible via a CDC/ACM device and verified the received data on the PC.
 2016-07-13 10:09:14 -06:00
Gregory Nutt
a7d8279714 Kinetis and Freedom-K64F: Remove unused configuration variable; fix some compile issues; SDHC is now enabled in the nsh configuration (but does not work) 2016-07-13 09:56:02 -06:00
Gregory Nutt
2f12de6f28 Freedom-K64F: Add hooks for automounter; Change NSH configuration to use Windows 2016-07-13 09:23:57 -06:00