Commit Graph

69 Commits

Author SHA1 Message Date
YAMAMOTO Takashi
f8077022bd Introduce CONFIG_DEFAULT_TASK_STACKSIZE
* The appropriate size of stack varies among archs.
  E.g. for 64-bit sim, 2048 is way too small, especially when the task
  happens to use host OS functionalities.
  I plan to allow an arch provide its own default.

* I plan to use this to replace hardcoded "STACKSIZE = 2048" in APPDIR.
2020-03-26 22:30:13 -05:00
Xiang Xiao
cde88cabcc Run codespell -w with the latest dictonary again
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-02-23 22:27:46 +01:00
Gregory Nutt
21aef0dd68 drivers/*/Kconfig: Consolidate driver Kconfig Files.
This commit does two things:

1. First, it reorganizes the driver Kconfig files so that each is self contained.  Before, a part of the driver configuration was in drivers/Kconfig and the rest was in in drivers/xyz/Konfig.  Now, all of the driver configuration is consolitated in the latter.

2. Second, this commit correct numerous serious errors introduced in a previous reorganization of the driver Kconfig files.  This was first noted by Nicholas Chin in PR270 for the case of the drivers/i2c/Kconfig but some examination indicates that the error was introduced into several other Kconfig files as well.

The nature of the introduced error was basically this:

- Nothing must intervene between the menuconfig selection and the following conditional configuration otpions.
- A previous PR erroneously introduced unconditional options between the menuconfig and the following confditional logic, thus corrupting the driver menus.

This error was easy to make because the driver Kconfig files were not well modularized.  Making them fully self-contained should eliminate this kind of error in the future.
2020-02-15 15:19:11 +01:00
Gregory Nutt
10721c0826 Kconfig: Move the ARCH_PHY_INTERRUPT option to net/Kconfig and make it
unconditionally selectable.
2020-02-09 00:55:41 +00:00
Xiang Xiao
3cb259daa6 drivers/Kconfig: Move if/endif to subfolder Kconfig
Move if/endif to subfolder Kconfig and make ARCH_HAVE_XXX option always selectable by moving out of if/endif
2020-02-08 08:04:05 -06:00
Peter van der Perk
513475c11c Kinetis renamed TJA1100 to TJA110X registers 2020-02-07 10:04:48 +01:00
Xiang Xiao
c5b1554d84 Remove NETDEV_LOOPBACK option, NET_LOOPBACK is enough 2020-02-02 08:25:06 -06:00
Xiang Xiao
2d7c072723 Remove duplicated NET_SLIP option from drivers/net/Kconfig 2020-02-02 08:24:50 -06:00
Guiding Li
8b92305265 This commit brings in the drivers needed to support OpenAMP. These changes were ported from https://github.com/FishsemiCode/nuttx. The current state: Most drivers do now compile but are not yet verfied.
This port was effort of a number of people, I rather arbitrarily gave authorship to Guiding Li because he has the largest number of fundamental quashed commits from the Xiamoi repository.

Squashed commit of the following:

Author: Xiang Xiao <xiaoxiang@pinecone.net>
    include/nuttx/b2c.h and libx/libc/string:  Add non-standard string functions to deal with cases where there are more than 8-bits in a type char.

Author: Gregory Nutt <gnutt@nuttx.org>
    Fix several build issues/missing definitiona needed for OpenAMP build in drivers/.
    Add OpenAMP code has been reviewed and ran through tools/nxstyle (with all reports accounted for).

Author: Xiang Xiao <xiaoxiang@xiaomi.com>
    tools/:  Fix the minor issue in Makefile

Author: Gregory Nutt <gnutt@nuttx.org>
    drivers/rptun/rptun.c:  Review for coding standard.  Run against tools/nxstyle.
    tools/LibTargets.mk:  Fix some TABs that were turned into spaces by a copy-paste.
    fs/hostfs:  Add configure and build support for hostfs RPC.
    drivers/timer:  Add configure and build support for syslog RTC.
    drivers/syslog:  Add configure and build support for syslog RPC.
    drivers/serial:  Add configure and build support for serial RPC.
    Kconfig, tools/*.mk. openamp/:  Add basic OpenAMP build support.
    drivers/rptun:  Add configure and build support for OpenAMP tunnel drivers.
    drivers/net:  Update Make.defs and Kconfig for OpenSDA support.
    Remove drivers/clk/clk-rpmsg.c drivers/power/rpmsg_regulator.c.  These depend on upstreaming support for a new subsystem based on the clk/regulator is model from Linux.  Removed because we want to separate the activities.  We will just try to get the basic OpenAMP support in place for now.
    Remove drivers/misc/misc_rpmsg.c and include/nuttx/misc/misc_rpmsg.h.  These are specific to the Xiaomi application.

Author: zhuyanlin <zhuyanlin@pinecone.net>
    This commit brings in the OpenAMP OS driver/RPC components from https://github.com/FishsemiCode/nuttx.  Initial commit is source files only.  Additional changes to Kconfig and Make.defs files still needed.

Author: Jianli Dong <dongjianli@pinecone.net>
    This commit brings in the OpenAMP OS driver/RPC components from https://github.com/FishsemiCode/nuttx.  Initial commit is source files only.  Additional changes to Kconfig and Make.defs files still needed.

Author: Guiding Li <liguiding@pinecone.net>
    This commit brings in the OpenAMP OS driver/RPC components from https://github.com/FishsemiCode/nuttx.  Initial commit is source files only.  Additional changes to Kconfig and Make.defs files still needed.
2019-11-02 11:30:33 -06:00
David Sidrane
43a3a0f400 Merged in david_s5/nuttx/master_k66_ethernet (pull request #1064)
NXP k66 Ethernet

* Kinetis:Add TJA1100 Phy

* Kinetis:enet.c formated with nxstyle

* net:mii Cleanup TJA1100 Support

      Formating and adding mask and shifts

* net:Kconfig Cleanup formatting

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-10-30 18:29:54 +00:00
Xiang Xiao
3bc62f1ccc Change space to tab and help to ---help--- in Kconfig files. 2019-10-05 21:39:12 -06:00
Valmantas Paliksa
de05dd6e67 drivers/net/telnet.c: Handle ctrl events (SIGINT, SIGSTP). 2019-05-21 09:57:46 -06:00
Ken Pettit
a97c4d8644 drivers/net/telnet.c: Add NAWS and poll interface to telnet for screen size negotation used with termcurses.
arch/arm/src/samv7/sam_serial.c: Fix case where TTYS0 is not defined.
2019-01-05 12:14:05 -06:00
Gregory Nutt
09f4dee6bc All network drivers! Change pre-processor logic that selects the high priority work queue or gives preferential treatment to the high priority work. All network logic must run on the low priority work queue! Or suffer the consequences. 2018-11-21 07:57:26 -06:00
Xiang Xiao
77098f8736 Move NETDEV_LATEINIT from drivers/net/Kconfig to net/Kconfig so that we can select NETDEV_LATEINIT without enabling NETDEVICES since the net driver in arch folder may need to initialize later too. 2018-11-12 06:36:26 -06:00
Xiang Xiao
149748e4ed drivers/net: drivers/net: Add support for Microchip LAN91C111 driver 2018-08-24 11:07:07 -06:00
Alan Carvalho de Assis
283b73edc5 Fix lots of typos in C comments and Kconfig help text 2018-07-08 18:24:45 -06:00
Masayuki Ishikawa
324008c1e5 drivers/net: Add support for telnet character mode
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2018-01-09 20:19:26 +09:00
Gregory Nutt
7deb24484c This comment converts the underlying IPC used by the UserFS from Unix domain local sockets to UDP LocalHost loopback sockets. The problem with the local sockets is that they do require operations on the top level psuedo-file system inode tree. That tree must be locked during certain traversals such as enumerate mountpoints or enumerating directory entries.
This conversion is unfortunate in the sense that Unix local domain sockets are relatively lightweight.  LocalHost UDP sockets are much heavier weight since they rely on the full UDP stack.  If anyone is up for a complete redesign, then using some shared memory and a POSIX message queue would be lightweight again.

This commit also fixes several bugs that were not testable before the inode tree deadlock.  I cannot say that the logic is 100% stable but it does not have basic functionality.

Squashed commit of the following:

    fs/userfs:  Order locking so that access to the shared I/O buffer is also locked.
    fs/userfs:  Converts to use LocalHost UDP loopback for IPC.
2017-11-05 12:25:58 -06:00
Gregory Nutt
cfc5f8fbaf drivers/net: Remove the old, unfinished Crystal LAN driver. I don't even have the hardware that it goes with anymore. 2017-10-28 10:27:00 -06:00
Gregory Nutt
3b67c06711 net/Kconfig: Remove to improper use of comma in syntax 2017-10-06 15:14:09 -06:00
Gregory Nutt
969d7c5814 Networking: Remove driver based backlog support. This affects the entire network, but is used by only one driver. The only supported with of supported RX backlog is via common read-ahead buffering. 2017-08-21 06:28:59 -06:00
Gregory Nutt
bd7c84b23e Remove CONFIG_NETDEV_MULTINIC. This increases code size by a little, but greatly reduces the complexity of the network code. 2017-08-08 14:24:12 -06:00
Maciej Wójcik
4a8aa6ae95 typos 2017-03-01 12:56:15 +01:00
Gregory Nutt
7467329a98 Eliminate CONFIG_NO_NOINTS. Lots of files changed -> lots of testing needed. 2016-12-03 16:28:19 -06:00
Gregory Nutt
43459fe75e DM09x0 Ethernet now supports CONFIG_NET_NOINTS 2016-12-03 11:42:15 -06:00
Gregory Nutt
c0cbea2550 Remove RGMP and RGMP drivers. 2016-12-02 09:49:33 -06:00
Gregory Nutt
0804286ad3 arch/: Add option to use low-priority work queue to all Ethernet drivers in arch that support CONFIG_NET_NOINTS. 2016-11-19 09:20:01 -06:00
Gregory Nutt
936b55f608 drivers/net: Add option to use low-priority work queue to all drivers in drivers/net. Not yet added to all architecture-specific network drivers. 2016-11-18 09:22:49 -06:00
Gregory Nutt
52560bba37 ENC28J60: Allow either HP or LP work queue to be used. 2016-11-18 08:41:27 -06:00
Gregory Nutt
1cdc746726 Rename CONFIG_DEBUG to CONFIG_DEBUG_FEATURES 2016-06-11 14:14:08 -06:00
Gregory Nutt
3a74a438d9 Rename CONFIG_DEBUG_VERBOSE to CONFIG_DEBUG_INFO 2016-06-11 11:50:18 -06:00
Gregory Nutt
057b6aef2c drivers/net: Move the Telnet driver from apps/netutils/netnetd to drivers/net 2015-12-07 09:26:57 -06:00
Gregory Nutt
2a93c66948 include/nuttx/net/netdev.h and several Ethernet drivers in arch/: Most network drivers to not support statistics. Those that do only support them when DEBUG is enabled. Each driver collects an architecture specific set of statistics and there is no mechanism in place to view those statistics. Thus, the driver feature was mostly useless. This change standardizes the driver statistics and puts the definition in the common network device structure defined in netdev.h where they can be accessed by network applications. All Ethernet drivers that collect statistics have been adapted to use these common statistics. 2015-11-26 12:08:09 -06:00
Gregory Nutt
3c5f817513 Networking: Local loopback is basically functional and is no longer EXPERIMENTAL 2015-08-24 13:58:57 -06:00
Gregory Nutt
933d74e5c1 Networking: With these changes, I can ping the local loopback device from the simulator 2015-08-24 13:49:12 -06:00
Gregory Nutt
0b012c7978 Fix some initial loop back device compilation errors; mark configuration as EXPERIMENTAL 2015-08-24 11:29:54 -06:00
Gregory Nutt
ccb24e1766 drivers/net: Add a basic prototype for a local loopback device 2015-08-24 11:03:36 -06:00
Gregory Nutt
ea2fafb024 Add definitions to support a local loopback link layer 2015-08-24 08:25:08 -06:00
Gregory Nutt
0dd273935a Standardize naming of all SLIP configuration options 2015-08-06 15:08:15 -06:00
Gregory Nutt
86769101a1 SLIP: Review code, update comments, add missing configuration items 2015-08-06 14:32:12 -06:00
Anton D. Kachalov
88861e562a Add support for a Faraday FTMAC100 Ethernet MAC Driver. From Anton D. Kachalov 2015-07-29 15:57:58 -06:00
Gregory Nutt
5a7b2757aa Add definitions for SMSC LAN8742A PHY 2015-07-19 13:09:48 -06:00
Gregory Nutt
cb5a3bd84d Fix error in Kconfig of previous change: Can't mix tabs and spaces in help text 2015-07-17 08:31:21 -06:00
Gregory Nutt
652371c919 Add CONFIG_NETDEV_LATEINIT that can be used to suppress calls to up_netinitialize() from early initialization 2015-07-17 07:20:16 -06:00
Gregory Nutt
342f5fe33d Fix references to the no-longer-existent misc/ directory in comments, README files, and documentation 2015-06-28 08:08:57 -06:00
Gregory Nutt
391367e8ca LPC17 Ethernet: Add support for the Micrel KSZ8041 PHY. 2015-06-03 17:34:36 -06:00
Gregory Nutt
312ae5713e PIC32MZ Ethernet: Add support for LAN8740A PHY 2015-03-29 07:05:30 -06:00
Gregory Nutt
469827640b Add support for LAN8740 2015-03-23 15:34:10 -06:00
Gregory Nutt
32aadd9cc2 SAMV7: Quick'n'dirty port of the SAMA5D4 Ethernet MAC driver to the SAMV7. Still some unresovled issues with DCache handling 2015-03-16 13:51:37 -06:00