When reading https://github.com/apache/nuttx-apps/pull/1793, I found a previous problem https://github.com/apache/nuttx-apps/pull/1454#discussion_r1045718067 now still exists on current master (inf in iperf bandwidth).
By step-by-step debugging, I found a value of 1000000.0 stored in register d8 is overwritten as 0 after context switch, then fdiv results in inf because of divided by 0. Finally I found that ARCH_FPU is not enabled while compiler is using FPU, and may lose values in floating-point registers.
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
1. Update all CMakeLists.txt to adapt to new layout
2. Fix cmake build break
3. Update all new file license
4. Fully compatible with current compilation environment(use configure.sh or cmake as you choose)
------------------
How to test
From within nuttx/. Configure:
cmake -B build -DBOARD_CONFIG=sim/nsh -GNinja
cmake -B build -DBOARD_CONFIG=sim:nsh -GNinja
cmake -B build -DBOARD_CONFIG=sabre-6quad/smp -GNinja
cmake -B build -DBOARD_CONFIG=lm3s6965-ek/qemu-flat -GNinja
(or full path in custom board) :
cmake -B build -DBOARD_CONFIG=$PWD/boards/sim/sim/sim/configs/nsh -GNinja
This uses ninja generator (install with sudo apt install ninja-build). To build:
$ cmake --build build
menuconfig:
$ cmake --build build -t menuconfig
--------------------------
2. cmake/build: reformat the cmake style by cmake-format
https://github.com/cheshirekow/cmake_format
$ pip install cmakelang
$ for i in `find -name CMakeLists.txt`;do cmake-format $i -o $i;done
$ for i in `find -name *\.cmake`;do cmake-format $i -o $i;done
Co-authored-by: Matias N <matias@protobits.dev>
Signed-off-by: chao an <anchao@xiaomi.com>
Signed-off-by: simonatoaca <simona.alexandra2000@gmail.com>
esp32-sparrow-kit: Added rgb led driver to bringup and to defconfig
Signed-off-by: simonatoaca <simona.alexandra2000@gmail.com>
Fixed checkstyle
Signed-off-by: simonatoaca <simona.alexandra2000@gmail.com>
Update esp32_rgbled.h
Update boards/xtensa/esp32/common/src/esp32_rgbled.c
Co-authored-by: Petro Karashchenko <petro.karashchenko@gmail.com>
Update boards/xtensa/esp32/common/src/esp32_rgbled.c
Co-authored-by: Petro Karashchenko <petro.karashchenko@gmail.com>
Update boards/xtensa/esp32/common/src/esp32_rgbled.c
Co-authored-by: Petro Karashchenko <petro.karashchenko@gmail.com>
Update boards/xtensa/esp32/common/src/esp32_rgbled.c
Co-authored-by: Petro Karashchenko <petro.karashchenko@gmail.com>
Removed ret 0 as an error in the case of nx_write()
The framebuffer itself already initializes the display so there is no need to
do the reverse operation. Otherwise the code gets stuck in an infinite loop.
Signed-off-by: Robert-Ionut Alexa <robertalexa2000@gmail.com>
Summary:
- This commit adds netnsh_hv and netnsh_smp_hv to run the NuttX
with hypervisor environments
- Also updates README.txt
Impact:
- None
Testing:
- Tested with qemu=7.1 + kvm on raspi3b+ (ubuntu server 20.04)
- Tested with qemu-7.1 + hvf on M1/MBP (macOS 12.6.1)
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary:
- I noticed that virtio-blk and FAT are not enabled for some
virt configurations.
- This commit enables them for testing.
Impact:
- None
Testing:
- Tested with qemu-7.1
- NOTE: file copy with rv-virt:knetnsh64 is sometimes unstable.
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Changes the executable type built against the `make export` target fully linked by default. This greatly improves performance when loading applications, as relocations no longer need to be processed.
SAMv7 encoder driver with GPIO pins was written without IOCTL support.
While this driver does not require any lower level IOCTLs for its
functionality the upper layer fails on assertion when unknown command
can not be send to lower layer. This commit adds IOCTL handler that
always returns -ENOTTY as no commands are supported.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
