Commit Graph

70 Commits

Author SHA1 Message Date
Gregory Nutt
bb623d1e04 This commit renames all internal OS functions defined under sched/task so that they begin with the prefix. For example, nxtask_exit() vs. task_exit().
Squashed commit of the following:

    Trivial, cosmetic
    sched/, arch/, and include:  Rename task_vforkstart() as nxtask_vforkstart()
    sched/, arch/, and include:  Rename task_vforkabort() as nxtask_vforkabort()
    sched/, arch/, and include:  Rename task_vforksetup() as nxtask_vfork_setup()
    sched/:  Rename notify_cancellation() as nxnotify_cancellation()
    sched/:  Rename task_recover() to nxtask_recover()
    sched/task, sched/pthread/, Documentation/:  Rename task_argsetup() and task_terminate() to nxtask_argsetup() and nxtask_terminate(), respectively.
    sched/task:  Rename task_schedsetup() to nxtask_schedsetup()
    sched/ (plus some binfmt/, include/, and arch/):  Rename task_start() and task_starthook() to nxtask_start() and nxtask_starthook().
    arch/ and sched/:  Rename task_exit() and task_exithook() to nxtask_exit() and nxtask_exithook(), respectively.
    sched/task:  Rename all internal, static, functions to begin with the nx prefix.
2019-02-04 13:42:51 -06:00
Xiang Xiao
d6b0b0d94b sched/mqueue/mq_desclose.c: Fix warning: variable 'msgq' set but not used 2019-01-27 11:08:28 -06:00
Xiang Xiao
fb63c0a293 sched/signal and related changes to other OS subsystems. 2019-01-27 09:28:59 -06:00
Gregory Nutt
3b22d13493 sched/: Add debug assertions before each call to up_block_task() to assure that there is no attempt to block an IDLE task. 2018-11-30 06:54:15 -06:00
Xiang Xiao
a9ff43d93c fs/aio, libs/libc/aio, sched/mqueue, sched/timer, and sched/signal: Remove the code duplication for SIGEV_THREAD. 2018-11-08 08:19:17 -06:00
Gregory Nutt
9546481054 Fix some typographical errors. 2018-09-14 06:55:45 -06:00
Gregory Nutt
fc127fd297 sched/signal: Add a generic signal notification facility. Modify the custom IOB available notifier so that it is now just a wrapper around this generic signal notification. This generic signal notification faility will, eventually, be used to support network polling.
Squashed commit of the following:

    mm/iob:  The IOB available notifier is now just a wrapper around the common signal notifier.

    sched/signal:  Add a generic signal notification facility.

    sched/signal/sig_evthread.c:  More trivial naming changes.

    sched/signal:  Rename nxsig_notification() to nxsig_evthread() to make forthcoming naming additions more consistent.
2018-09-09 08:32:37 -06:00
Xiang Xiao
e1202d2ed3 Replace all ASSERT with DEBUGASSERT to save the code space 2018-08-24 06:58:30 -06:00
Xiang Xiao
467d2a58ea Replace non critical PANIC with DEBUGPANIC to save the code space 2018-08-24 06:21:15 -06:00
Simon Liedl
6fe770bb21 Merged in sliedl/nuttx (pull request #700)
sched/mqueue/mq_notify.c: Fix - only part of struct copied to internal structure

As source adress the adress of the struct member sigev_value was used,
and it is not located the start of the struct.
This leads to invalid data being copied to internal structure.
Both source and destination should be of type struct sigevent* .

Approved-by: GregoryN <gnutt@nuttx.org>
2018-07-30 12:50:04 +00:00
Gregory Nutt
8fdbb1e0a4 Elimate use of the non-standard type systime_t and replace it the equivalent, standard type clock_t
Squashed commit of the following:

    sched:  Rename all use of system_t to clock_t.
    syscall:  Rename all use of system_t to clock_t.
    net:  Rename all use of system_t to clock_t.
    libs:  Rename all use of system_t to clock_t.
    fs:  Rename all use of system_t to clock_t.
    drivers:  Rename all use of system_t to clock_t.
    arch:  Rename all use of system_t to clock_t.
    include:  Remove definition of systime_t; rename all use of system_t to clock_t.
2018-06-16 12:16:13 -06:00
Gregory Nutt
b54ffe858a Standardization of some function headers. 2018-03-13 09:52:27 -06:00
Alan Carvalho de Assis
fb50c44d08 Fix various issues noted by Coverity 2018-02-06 09:13:16 -06:00
Gregory Nutt
7cf88d7dbd Make sure that labeling is used consistently in all function headers. 2018-02-01 10:00:02 -06:00
Gregory Nutt
da50646bcf sched/wdog: wd_start() is an internal OS function and should not set the errno value. Reviewed and updated every call to wd_start() to verify if return value is used and if so if the errno value is accessed. 2018-01-31 10:09:14 -06:00
Gregory Nutt
eb79a575f6 Fix a few places where there was a semicolon following the 'if' condition, makeing the following logic unconditional. 2017-10-10 14:24:13 -06:00
Gregory Nutt
e11e3b2607 Squashed commit of the following:
Change all calls to mq_receive() and mq_timedreceive() in the OS to calls to nxmq_receive() and nxmq_timedreceive(), making appropriate changes for differences in return values.

    sched/mqueue:  Add nxmq_receive() and mxmq_timedreceive() which are functionally equivalent to the standard mq_receive and mq_timedreceive() except that (1) they do not create cancellation points, and (2) the do not modify the application's errno variable.
2017-10-10 09:57:40 -06:00
Gregory Nutt
fca07be1df Squashed commit of the following:
Change all calls to mq_send() and mq_timedsend() in the OS to calls to nxmq_send() and nxmq_timedsend(), making appropriate changes for differences in return values.

    sched/mqueue:  Add internal function nxmq_send() and nxmq_timedsend() that are equivalent to mq_send() and mq_timedsend() except that they do not create cancellation points and do to not modify the errno variable.
2017-10-10 08:44:12 -06:00
Gregory Nutt
e7c52bac60 Squashed commit of the following:
sched/mqueue:  Rename all private static functions for use the nxmq_ vs. mq_ naming.

    sched/mqueue:  Rename all OS internal functions declared in sched/mqueue/mqueue.h to begin with nxmq_ vs. mq_.  The mq_ prefix is reserved for standard application interfaces.
2017-10-09 09:06:46 -06:00
Gregory Nutt
8198ba6a6d This change renames all internal, private NuttX signal-related functions to use the prefix nxsig_ so that they cannot be confused with application interfaces that begin, primarily, with sig_
This is analogous to similar renaming that was done previously for semaphores.

Squashed commit of the following:

    sched/signal:  Fix a few compile warnings introduced by naming changes.

    sched/signal:  Rename all private, internal signl functions to use the nxsig_ prefix.

    sched/signal:  Rename sig_removependingsignal, sig_unmaskpendingsignal, and sig_mqnotempty to nxsig_remove_pendingsignal, nxsig_unmask_pendingsignal, and nxsig_mqnotempty to make it clear that these are OS internal interfaces.

    sched/signal:  Rename sig_findaction and sig_lowest to nxsig_find_action and nxsig_lowest to make it clear that these are OS internal interfaces.

    sched/signal:  Rename sig_allocatepingsigaction and sig_deliver to nxsig_alloc_pendingsigaction and nxsig_deliver to make it clear that these are OS internal interfaces.

    sched/signal:  Rename sig_cleanup, sig_release, sig_releasependingaction, and sig_releasependingsignal to nxsig_cleanup, nxsig_release, nxsig_release_pendingaction, and nxsig_release_pendingsignal to make it clear that these are OS internal interfaces.

    sched/signal:  Rename sig_tcbdispatch and sig_dispatch to nxsig_tcbdispatch and nxsig_dispatch to make it clear that these are OS internal interfaces.

    sched/signal:  Rename sig_releaseaction and sig_pendingset to nxsig_release_action and nxsig_pendingset to make it clear that these are OS internal interfaces.

    sched/signal:  Rename sig_initialize and sig_allocateactionblock to nxsig_initialize and nxsig_alloc_actionblock to make it clear that these are OS internal interfaces.
2017-10-05 13:25:25 -06:00
Arjun Hary
b274a97840 Miscellaneous fixes from astyle tool. 2017-08-14 17:19:27 -06:00
Gregory Nutt
d5207efb5a Be consistent... Use Name: consistent in function headers vs Function: 2017-04-21 16:33:14 -06:00
Jussi Kivilinna
c57d49f420 clock: Add new type ssystime_t for relative 64-bit ticks, change ticks<->time conversion functions to use ssystime_t 2017-04-21 08:51:31 -06:00
Gregory Nutt
dca77fa06a sigtimedwait: When timer expires, up_unblock_task() is called. This is okay in the single CPU case because interrupts are disable in the timer interrupt handler. But it is insufficient in the SMP case. enter_ and leave_critical_section() must be called in order to manage spinlocks correctly. 2017-02-24 10:07:23 -06:00
Gregory Nutt
74189d84e2 Cancellation points: Fix some backward logic in conditional compilation. 2017-02-02 06:42:41 -06:00
Gregory Nutt
6997cda1b5 Grrr... cloned typos! 2016-12-10 09:45:55 -06:00
Gregory Nutt
842ec7e612 ifdef out some non-reachable code 2016-12-10 09:43:04 -06:00
Gregory Nutt
b52e4e5ecd Move cancellation point definitions to their own header file. 2016-12-10 09:08:26 -06:00
Gregory Nutt
bc3ca25cc7 Cancellation points: Close up some logic to eliminte some race conditions. 2016-12-10 08:36:58 -06:00
Gregory Nutt
7fce8022c6 Finishes all cancellation point logic 2016-12-09 16:50:34 -06:00
Gregory Nutt
f0b4705d57 Correct a comment 2016-09-15 13:10:42 -06:00
Gregory Nutt
e3bbfa2d85 mq_send() was not setting the errno value on certain failures to allocate a message 2016-09-15 12:42:24 -06:00
Gregory Nutt
368f241637 Correct some comments 2016-09-15 08:46:41 -06:00
Gregory Nutt
3fba968bb0 Fix an error when a task with open message queue descriptors is killed via task_delete(). Noted by Anton Gropyanov. 2016-04-11 11:14:18 -06:00
Gregory Nutt
0fb035f76b Standardize some naming in code section comments 2016-02-21 18:09:04 -06:00
Gregory Nutt
b71907888e Remove some empty file section section header comments 2016-02-17 17:04:51 -06:00
Gregory Nutt
6e3107650d nuttx/sched: Replace irqsave() with enter_critical_section(); replace irqrestore() with leave_critical_section() 2016-02-14 08:17:46 -06:00
Gregory Nutt
74db48202e sched/: Replace explict references to g_readytorun with indirect references via the this_task() macro 2016-02-06 17:44:41 -06:00
Gregory Nutt
849df03d22 Update dates on files modified for SIGEV_THREAD support 2015-12-30 13:28:39 -06:00
Gregory Nutt
9835eeb181 signals: Basic framework to support SIGEV_THREAD 2015-12-30 13:20:31 -06:00
Gregory Nutt
79d554939e sched/: Fix some spacing issues 2015-10-07 19:59:14 -06:00
Gregory Nutt
5b51a9fcdd Standardize the width of all comment boxes in C files 2015-10-02 17:43:18 -06:00
Gregory Nutt
cb9e27c3b0 Standardize naming used for public data and function groupings 2015-10-02 16:30:35 -06:00
Gregory Nutt
d8db596b3b POSIX message queues: Move mq_setattr() and mq_getattr() from nuttx/libc/mqueue to nuttx/sched/mqueue. Also add sysyscall support for mq_setattr() and mq_getattr(). This is necessary in protected and kernel builds because in those cases the message queue structure is protect and cannot be accessed directly from user mode code. Noted by Jouko Holopainen. 2015-06-03 09:24:17 -06:00
Gregory Nutt
84f0303fc0 mq_timedreceive() move the location where the errno value is set; the TIMEDOUT errno setting was being overwritten by subsequent actions before returning. Noted by Freddie Chopin. 2015-06-03 07:24:50 -06:00
Gregory Nutt
3adcae8ffb Update the type passed to watchdog timer handlers. Using uint32_t is a problem for 64-bit machines. 2015-05-18 08:53:42 -06:00
Gregory Nutt
caea44a624 Fix a case in mq_timedsend() where the return errno value was being overwritten 2015-03-10 12:05:33 -06:00
Gregory Nutt
7d46801f46 Reorder some operations to minimize a race condition 2015-03-10 10:41:21 -06:00
Gregory Nutt
4c6057eca1 mq_timedsend(): Do check for time errors if the message queue is not full. Noted by Freddie Chopin 2015-03-10 09:42:35 -06:00
Gregory Nutt
cded7ea682 Fix some time value changes; mostly changing greater than 1000000000 to greater than or equal to 1000000000. From Juha Niskanen 2015-02-20 07:07:36 -06:00