sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
34,364 Commits 1 Branch 0 Tags 291 MiB
7f2e6ff1ee
Commit Graph

34364 Commits

This Branch
This Branch
All Branches
Author SHA1 Message Date
Jason Harris
7f2e6ff1ee configs/nucleo-h743zi/nsh/defconfig: Enable the FPU. 2019-04-25 17:05:08 -06:00
Gregory Nutt
149e50798a drivers/can/mcp2515.c: Eliminate some warnings found in build testing. 2019-04-25 12:08:31 -06:00
Phil Coval
ee5298e046 Merged in rzr/nuttx/sandbox/rzr/review/master (pull request #859) 
nucleo-144: Regenerate f767-netnsh/defconfig

It appear that CONFIG_NET_SOCKOPTS,
is no more explicity needed.

Change-Id: I33e1b60ce1778bb963f709b963c89ef6b489c362
Signed-off-by: Philippe Coval <p.coval@samsung.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2019-04-25 17:42:57 +00:00
Gregory Nutt
c7f042ba14 arch/arm/src: Remove dependency on CONFIG_ARCH_FPU for inclusion of nvic.h in all other *_start.c files. 2019-04-25 07:17:10 -06:00
Mateusz Szafoni
5602248097 arch/arm/src/stm32h7/stm32_start.c: Inclusion of nvic.h should not be conditioned on CONFIG_ARCH_FPU. 2019-04-25 07:09:19 -06:00
Gregory Nutt
e92af2c75e Fix a typo introduced by a642e9ffac. 2019-04-24 14:31:16 -06:00
Gregory Nutt
a642e9ffac configs/stm32f103-minimum/src/stm32_mcp2515.c: Patch up more brekage found in build testing. Looks like fields were added and removed by commit eb7373cedf, but the implementation that uses the structure were not updated. 2019-04-24 14:23:45 -06:00
Gregory Nutt
800f6003a6 drivers/can/can.c: Another fatal build problem from recent commits. Don't people actually test these things? 2019-04-24 14:08:14 -06:00
Gregory Nutt
e8fc7356a9 drivers/can/can.c: Fix some sstruct typos that crept in recently. 2019-04-24 13:54:30 -06:00
Gregory Nutt
0d203fd535 drivers/serial: The upper half serial driver configuration CONFIG_SERIAL_DMA used to enable DMA on both RX and TX streams. This was replaced with CONFIG_SERIAL_RXDMA and CONFIG_SERIAKL_TXDMA which will permit supporting DMA on only one or both streams. 2019-04-24 12:11:40 -06:00
Jason Harris
2609b0dff3 drivers/usbhost/usbhost_storage.c: Correct typo "const const" to "const". 
arch/arm/src/stm32/stm32_i2s.c:  In debug assertions, it  on a sample rate of 0, but based on other code comments this value implies disabling the i2s master clock.

arch/arm/src/stm32/stm32_usbhost.h and arch/arm/src/stm32/Kconfig:  Allow vbus monitoring for the OTG_HS host driver.
 2019-04-23 11:11:11 -06:00
Nobuto Kobayashi
2a555d1165 configs/spresense: Add Spresense board support. 2019-04-22 08:31:02 -06:00
Nobuto Kobayashi
eba004d498 arch/arm/src/cxd56xx and arch/arm/include/cxd56xx: Add initial CXD56xx chip sources. 2019-04-22 07:51:22 -06:00
Gregory Nutt
eef5e777c9 include/cxx/cstdlib: Add std::random() 2019-04-21 15:11:24 -06:00
Anthony Merlino
78f48f476f Merged in antmerlino/nuttx/stm32f7-pinmap-revert (pull request #857) 
arch/arm/src/stm32f7: stm32f76xx77xx_pinmap.h:  Adds additional pin alternate function for SPI2

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2019-04-17 17:06:23 +00:00
Anthony Merlino
b13cf7833a Merged in antmerlino/nuttx/stm32f76xx7xx_spi_pin (pull request #856) 
arch/arm/src/stm32f7: stm32f76xx77xx_pinmap.h:  Adds additional pin alternate function for SPI2

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2019-04-17 17:04:13 +00:00
David Sidrane
9c08d7fa42 Merged in david_s5/nuttx/master_f7_i2c_txe_fix (pull request #854) 
stm32f7:i2c track bad state

The previous commit was true draconian.
   Now we track bad state and so the SW
   reset only when it occurs.

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2019-04-17 13:50:11 +00:00
Fabian Justi
53a94594d6 Merged in Justifa/nuttx (pull request #855) 
Master

* arch/arm/src/stm32l4/stm32l4_pwm.c Fix register addr, en_bit and resetbit for pwm timers

* configs/nucleo-l476rg/src/nucleo-l476rg.h Fixed naming stm32l4_pwm_setup
    configs/nucleo-l476rg/src/stm32_appinit.c Fixed naming stm32l4_pwm_setup

Approved-by: David Sidrane <david_s5@nscdg.com>
Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2019-04-17 13:48:37 +00:00
David Sidrane
dd1a2b5ddb Merged in david_s5/nuttx/master_f7_i2c_txe_fix (pull request #853) 
stm32f7:i2c interrupt storm fix

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2019-04-16 22:45:40 +00:00
Matias N
7ac80a1d56 arch/arm/src/stm32/Kconfig: it seems one option in the timer configuration was lost at some point. 2019-04-15 14:57:01 -06:00
Matous Pokorny
1e54a14c9f Fix some typos in comments. 2019-04-15 07:56:53 -06:00
Jussi Kivilinna
4b2264fa16 drivers/leds/userled: Fix ledset validity check in ULEDIOC_SETALL ioctl. 2019-04-15 07:54:11 -06:00
Gregory Nutt
33f95d7f8a configs/stm32ldiscovery/src: Add support for board_late_initialize(), Move common initialization logic out of board_app_initialize() into new file stm32_bringup.c 2019-04-15 07:44:25 -06:00
Gregory Nutt
c999d12bba net/utils: net_lock() and net_restorelock() not return a value. That values is the standard zero on success; negated errno value on failure. This return value is only needed for -ECANCELED. That cancellation indication needs to ripple all the way back to the highest levels where the cancellation can be acted on. This commit only adds the return value; it does not add checking for the return values of net_lock() and net_restorelock() at higher levels. That is required too. 2019-04-14 09:37:25 -06:00
Alan Carvalho de Assis
839620a954 configs/stm32f103-minimum/src: Add PROCFS automount support 2019-04-14 08:35:49 -06:00
Gregory Nutt
4179b8416f graphics/: Clean up some C and Kconfig comments. Remove Kconfig dependency on EXPERIMENTAL. 2019-04-13 16:54:55 -06:00
Gregory Nutt
23727e59aa Fix two malformed pre-preprocessor conditionals. 2019-04-13 15:42:46 -06:00
Gregory Nutt
c4f618e590 graphics/nxbe: This seems to fix the last of software cursor bugs. On the LPC54, it looks pretty clean. Not flickery as I feared. Probably not so good on low end displays. Possible transient artifacts? Not sure, maybe. Or maybe my eyes are playing tricks froom staring at this too long. 2019-04-13 15:08:32 -06:00
Matias N
3025fcefd3 arch/arm/src/stm32/stm32f10xxf30xx_flash.c: RCC register access should not be offset by FLASH register base. 2019-04-13 11:49:21 -06:00
Gregory Nutt
de7aedfe96 arch/arm/src/stm32: As noted by Matias N, the FLASH base address used was incorrect. It was using the address of the FLASH data, not the address of the FLASH registers. 2019-04-13 11:18:38 -06:00
Gregory Nutt
099d9f94f4 graphics/nxbe: More work cursor coordinates. Still at least one big bug in the logic. 2019-04-13 10:13:00 -06:00
Valmantas Paliksa
c38b6cb068 arch/arm/src/stm32f7/stm32_can.c: CAN fixes. 2019-04-12 11:40:34 -06:00
Valmantas Paliksa
ca5d940b7a drivers/can/mcp2515.c: mcp2515 driver optimizations. 2019-04-12 11:37:08 -06:00
Valmantas Paliksa
7d112f5639 drivers/can/can.c: Support multiple readers of the same port 2019-04-12 11:13:42 -06:00
Valmantas Paliksa
2bb15a49a6 arch/arm/src/stm32f7/stm32_uid.c: Add UID access. 2019-04-12 08:46:02 -06:00
Valmantas Paliksa
29164c5706 arch/arm/src/stm32f7/stm32_flash.c: Add flash block mapping support for progmem. 2019-04-12 08:43:16 -06:00
Valmantas Paliksa
c574e71c89 arch/arm/src/stm32f7/stm32_ethernet.c: Autogenerate Ethernet MAC address from device unique ID. 2019-04-12 08:31:57 -06:00
Valmantas Paliksa
17176480df arch/arm/src/stm32f7/stm32_spi.c: Add SPI DMA threshold configuration. 2019-04-12 08:14:17 -06:00
Valmantas Paliksa
8cea24fdf0 arch/arm/src/stm32f: Added support for TICKLESS mode. 2019-04-12 08:10:02 -06:00
Gregory Nutt
13c6254f1b Documentation/NXGraphicsSubsystem.html: Update documentation to describe block, synchronization, and cursor interfaces. 2019-04-11 16:20:22 -06:00
Gregory Nutt
ee99e7317a /graphics/nxglib/cursor: Correct two locations where y used where x intended. 2019-04-11 13:25:32 -06:00
Gregory Nutt
39db179e1b graphics/nxbe/nxbe_cursor.c: Fix some garbage debug changes that snuck in with the last commit. 2019-04-11 10:40:18 -06:00
Ramtin Amin
e74e46aa7f arch/arm/src/stm32f7/stm32_otgdev.c: Correct hardcoded FIFO size that is wrong for OTG FS. 2019-04-11 10:37:40 -06:00
Gregory Nutt
fb04ad1e82 arch/arm/src/stm32f7/stm32_otgdev.c: Fix some comments that were screwed up by indent.sh. 2019-04-11 09:04:39 -06:00
Gregory Nutt
a759c7cdc3 graphics/nxglib/cursor: Correct handling of some bounding boxes. 2019-04-11 09:04:38 -06:00
Matias N
6e80562bf9 include/nuttx/usb/hid.h: The usbhid_descriptor_s struct defined in hid.h included some optional fields that should not be hard-defined as part of that structure. An arbitrray number of optional entries could be included in the descriptor, but that is not properly represneted. No code on NuttX currently depends on the structure definition with an optional descriptor so it is safe to remove. 2019-04-10 17:16:12 -06:00
Gregory Nutt
b91b2cafd0 graphics/nxbe: Fix more cursor-related problems. Currently cursor is presented but the system dies due to memory corruption. 2019-04-10 14:59:43 -06:00
Gregory Nutt
ad76ca674b graphics/nxbe: Some bugfix found early in cursor testing. 2019-04-10 12:31:43 -06:00
Gregory Nutt
d3bf5c7408 include/nuttx/nx/nxcursor.h: Nees to include nx.h. 2019-04-10 08:51:22 -06:00
Gregory Nutt
e514402c28 graphics/nxbe: Add some missing checks: Don't permit the software cursor to be enabled until it has been assigned an image; don't perform any cursor operations while the cursor is disabled. 2019-04-10 07:27:43 -06:00