Commit Graph

30749 Commits

Author SHA1 Message Date
Gregory Nutt
7f4af7b690 drivrs/sensors: Make a few other configuration settings consistent with the (undocumented) standard. 2017-08-24 09:45:46 -06:00
Gregory Nutt
5dd25bbfde Missed two naming changes in last commit 2017-08-24 09:32:24 -06:00
Gregory Nutt
9e386e3b31 drivrs/sensors/hts221: Fix inconsistent configuration variable naming; Try to bring closer to an as-of-yet undocumented naming convention. 2017-08-24 09:22:36 -06:00
Gregory Nutt
a668806b94 Update some README files; Plus minor simplification to a preceding change. 2017-08-24 06:44:35 -06:00
Gregory Nutt
e89edd6784 Networking: Rethink last fix. We can make this less protocol dependent. 2017-08-23 15:30:56 -06:00
Gregory Nutt
394a340da0 Networking: Compile error if Unix domain sockets selected; Update SAME70-xplained README me. 2017-08-23 15:04:40 -06:00
Anthony Merlino
d5e6f269b2 Merged in merlin17/nuttx (pull request #467)
drivers/wireless/spirit: Fixes a pre-processor directive

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-08-23 01:24:03 +00:00
Anthony Merlino
fbf830aef2 drivers/wireless/spirit: Fixes a pre-processor directive 2017-08-22 21:15:22 -04:00
Gregory Nutt
5ac993d2ef Update TODO list 2017-08-22 18:15:09 -06:00
Gregory Nutt
1972fd827f Another trivial update to the same README file. 2017-08-22 12:39:08 -06:00
Gregory Nutt
3f44666e16 Update a README file. 2017-08-22 12:35:58 -06:00
Gregory Nutt
9a8c4121e5 Network procfs: procfs/net_procfs_route.c building error occur if CONFIG_NET_ROUTE is enabled. Fix suggested by Aleksandr Kazantsev 2017-08-22 10:21:07 -06:00
Jussi Kivilinna
a099506b1b drivers/lcd: ssd1306: separate lcd_dev_s setup to separate object. g_oleddev takes 1 KiB because framebuffer and was allocated to .data section because of lcd_dev_s function pointer setup. Move lcd_dev_s setup out, so that g_oleddev goes to .bss and avoid wasting ROM. 2017-08-22 08:46:00 -06:00
ussi Kivilinna
89cc4741ac drivers/lcd: ssd1306: fix memory corruption caused by ssd1306_getrun(). ssd1306_getrun was writing one extra byte (with value 0) past target buffer when pixlen is multiple of 8. When pixlen was not multiple of 8, last byte of buffer was fully cleared, instead of modifying only the (pixlen % 8) bits of last byte. 2017-08-22 08:42:40 -06:00
Jussi Kivilinna
3dfeb9e59f drivers/lcd: ssd1306: add support for board power control. ThingseeOne has regulator for controlling display power on/off. Patch adds support for board based power control to SSD1306 driver. 2017-08-22 08:40:27 -06:00
Jussi Kivilinna
310a29227a drivers/lcd: add DD-12864WO-4A/SSD1309 support to SSD1306 driver 2017-08-22 08:32:52 -06:00
Juha Niskanen
d7ae3d74c3 STM32L4 ADC: correct EXTSEL macros 2017-08-22 06:49:48 -06:00
Pekka Ervasti
6b1ccef2f9 STM32L4 COMP: bind to upper half comp driver 2017-08-22 06:47:57 -06:00
Pekka Ervasti
cc0fea60ad drivers: analog: comp: add poll support 2017-08-22 06:26:57 -06:00
Gregory Nutt
67befb9642 ENC28J60: Update interface to use newer parameter passing to interrupt handlers 2017-08-21 16:49:43 -06:00
Gregory Nutt
241c1433ef ENCX24J600: Fix some warnings. Update interface to use newer parameter passing to interrupt handlers 2017-08-21 16:23:22 -06:00
Gregory Nutt
17ca117104 Update README 2017-08-21 15:23:17 -06:00
Mateusz Szafoni
509a756421 Merged in raiden00/nuttx (pull request #466)
Master

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-08-21 18:14:33 +00:00
raiden00pl
a5997cb186 stm32_dac: add support for HRTIM triggering 2017-08-21 19:46:18 +02:00
raiden00pl
a5f3a5848d stm32_dac.c typo 2017-08-21 18:59:21 +02:00
raiden00pl
db7a94288f stm32f33xxx_dma.h: typos 2017-08-21 18:50:07 +02:00
raiden00pl
b460f2bca1 stm32f10xxx_dma.h: fix DAC names and remove STM32F33 section 2017-08-21 18:50:07 +02:00
raiden00pl
104ff2b5d8 stm32_dac: separate dma buffer configuration for channels 2017-08-21 18:50:07 +02:00
Gregory Nutt
55f27c40e8 Add support for network procfs statistics when Nothing is enabled but PF_IEEE802154. 2017-08-21 09:31:12 -06:00
Gregory Nutt
77534e2b49 PF_IEEE802154: Improve some backlog counting logic; add more assertions to catch cases where the backlog count might deviate from the actual backlog. 2017-08-21 08:18:53 -06:00
Gregory Nutt
6b7a26c95c PF_IEEE802154: Add a maximum backlog option. This will prevent overrun of the RX frame queue if many frames are received from the radio, but no application is receiving the queued data. 2017-08-21 07:52:43 -06:00
Gregory Nutt
0eac90f775 PF_IEEE802154: On input, there may be a list of frames provided, not just one. When closed() and connection is freed, also need to free any frames remaining in the RX queue. 2017-08-21 07:13:34 -06:00
Gregory Nutt
969d7c5814 Networking: Remove driver based backlog support. This affects the entire network, but is used by only one driver. The only supported with of supported RX backlog is via common read-ahead buffering. 2017-08-21 06:28:59 -06:00
Juha Niskanen
17cd0696cb Merged in juniskane/nuttx/juniskane/chiph-edited-online-with-bitbucket-corre-1503300654585 (pull request #465)
chip.h edited online with Bitbucket: correct some STM32_NDAC

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-08-21 12:03:41 +00:00
Juha Niskanen
37867ae3b9 chip.h edited online with Bitbucket: correct some STM32_NDAC 2017-08-21 07:30:58 +00:00
Gregory Nutt
70911c3f52 PktRadio loopback driver: Fix compile problem by removing inappropriate const storage class. 2017-08-20 13:19:29 -06:00
Mateusz Szafoni
0cf6ff5d3c Merged in raiden00/nuttx (pull request #464)
Master

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-08-20 19:02:06 +00:00
raiden00pl
3f27a6cce5 Merge remote-tracking branch 'upstream/master' 2017-08-20 20:53:47 +02:00
Mateusz Szafoni
ccd421b158 stm32_dac.c edited online with Bitbucket 2017-08-20 18:47:44 +00:00
raiden00pl
04743f3e77 stm32_dac: change name convention. Previous naming was confusing 2017-08-20 20:19:53 +02:00
raiden00pl
0bed6ac8b4 STM32F33: correct STM32_NDAC 2017-08-20 20:07:50 +02:00
Gregory Nutt
30c51a49a5 drivers/net/tun.c: Currently cannot support TAP mode unless Ethenet is enabled 2017-08-20 12:01:38 -06:00
Gregory Nutt
2f2b94b65b Too much was removed in last squashed commit. 2017-08-20 11:32:44 -06:00
Gregory Nutt
1334ab3d2a IP forward: Correct some compile issues due to recent changes. 2017-08-20 11:46:43 -06:00
Gregory Nutt
b226dd9117 Fix some new compile problems if niether 6LoWPAN nor PF_IEEE802154 are enabled. 2017-08-20 11:11:09 -06:00
Mateusz Szafoni
04cfe3133c Merged in raiden00/nuttx (pull request #463)
Master

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-08-20 17:22:23 +00:00
Gregory Nutt
0438783afa Squashed commit of the following:
commit 5b7b6e6e616c475c782e9883ada9f4a3b7cb4e2c
Author: Gregory Nutt <gnutt@nuttx.org>
Date:   Sun Aug 20 11:13:17 2017 -0600

    IEEE 802.15.4 network device:  Make same changes as per loopback device so that it will build with PF_IEEE802154 but without 6LoWPAN.

commit d656a98cf8eab2f20e884224b52cd47ec35df4cc
Author: Gregory Nutt <gnutt@nuttx.org>
Date:   Sun Aug 20 10:31:28 2017 -0600

    PF_IEEE802154: More fixes to device registration and to IEEE 802.15.4 loopback driver for PF_IEEE802154 without 6LoWPAN.

commit 866bb9cbb0c5af79734bbd434c07fa2560b6608f
Author: Gregory Nutt <gnutt@nuttx.org>
Date:   Sun Aug 20 09:58:13 2017 -0600

    Network: Reorganize some Kconfig selections.

commit 230b4cb48008cba5fccdafa22340df1d43584829
Author: Gregory Nutt <gnutt@nuttx.org>
Date:   Sun Aug 20 09:19:53 2017 -0600

    Changes to conditional compilation so that PF_IEEE802154 can build without 6LoWPAN

commit d96cbd6520d40590a740f695c4cd72208ce872da
Author: Gregory Nutt <gnutt@nuttx.org>
Date:   Sun Aug 20 09:17:02 2017 -0600

    configs/sim/pf_ieee802154: Disable 6LoWPAN, IPv6, TCP, and UDP.  Now things do not build
2017-08-20 11:14:43 -06:00
raiden00pl
a8e8862ef9 stm32_dac.c: fix some configuration logic. When STM32_NDAC is greather than 1, then second channel is always DAC1OUT2. 2017-08-20 19:02:56 +02:00
Gregory Nutt
6919fb85e4 6LoWPAN/PF_IEEE802154: Created radiodev.h and renamed various structures to provide a better separation between 6LoWPAN and PF_IEEE802154. 2017-08-20 07:10:48 -06:00
raiden00pl
1479fd6075 stm32_comp: add default INM configuration and some missing COMP1,3,5,7 code 2017-08-20 10:45:55 +02:00