sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
30,323 Commits 1 Branch 0 Tags 291 MiB
7fc2fae1fa
Commit Graph

13364 Commits

Author SHA1 Message Date
Titus von Boxberg
f3267ddb71 I2C4_SDA can also be on GPIO PB7 2017-07-18 11:43:53 +02:00
savinz
1b27dd32af STM32 F7 Ethernet: Fix typo in header; Add memory sync barrier between writing to DMA TX descriptor and restarting DMA TX. Avoid calling work_queue on pollwork if it's already queued, just skip a poll cycle instead. Nucleo-144: Fix RMII TXD1 signal, connected to PB13 not to PG14. 2017-07-14 09:23:43 -06:00
Gregory Nutt
447785b264 SAMD/L21: Need to preserve errno value across syslog() call. 2017-07-12 16:22:23 -06:00
Gregory Nutt
10fbb2b089 SAMD/L21 USB: Remove all commented out logic. 2017-07-12 08:10:21 -06:00
Janne Rosberg
76ea6f09ec SAMD/L21: Add a USB driver. Developed for Filament Inc. by Offcode, LTD. 2017-07-12 07:46:46 -06:00
Matt Thompson
5448c99ff2 I was having issues with the bus freezing up .. slaves holding SDL low.. so I rewrote a good portion of the interrupt logic based on the application notes from Atmel. One major improvement is using the RXNACK flag in the STATUS register, which indicates that no device responded to an address packet. Assuming that the chip will always give an interrupt status, I believe it's possible to eliminate the timer as well. 2017-07-12 06:44:53 -06:00
Matt Thompson
1e0560b22f SAMD21: Fix some SPI-related issues. 2017-07-11 12:48:38 -06:00
Gregory Nutt
839019f305 SAMD/L21 I2C: Another update... needs to use enter/leave_critical_section vs. old irqsave/restore. 2017-07-11 07:01:05 -06:00
Alan Carvalho de Assis
5b9526b4c1 SAML21 I2C driver. Developed for and contributed with permissin from Filament company. 2017-07-11 06:58:58 -06:00
Gregory Nutt
79e5d2b7b6 STM32 TIM3/4 are always 16-bits; never 32-bits. Noted by Eetu Nevalainen. 2017-07-10 13:56:06 -06:00
Gregory Nutt
975473fed8 ICMPv6: Add 6LoWPAN and IP forwarding support. 2017-07-09 11:35:26 -06:00
Gregory Nutt
76587b2c6f STM32 Kconfig: 'unfold' some of the dependencies to provide better long term configuration support. This also effective reverts the recent 15b85738e7 2017-07-06 10:34:54 -06:00
Gregory Nutt
47be509d79 Rename CONFIG_STM32_STM32F40XX to CONFIG_STM32_STM32FXXXX since it is used by F4 parts other than F40x 2017-07-06 10:20:14 -06:00
gwenhael.goavec
15b85738e7 In arch/arm/src/stm32/Kconfig when the CPU is a STM32F4, some STM32_HAVE_xx with xx = {OTGFS, TIM3, TIM4, SPI3, I2S3, I2C3} are selected by default. But for F410 these peripherals are absent. This change add tests to check if the target CPU is an F410 or not and selects according to the situation. This also adds a select for STM32_HAVE_DAC1 present on this STM32 flavor. 2017-07-06 09:52:21 -06:00
Eetu Nevalainen
21dcc8cbc7 stm32f40xxx_rtcc ISR register and write protection fix 2017-07-03 11:06:07 -06:00
Gregory Nutt
68315b7444 Merged clang into master 2017-07-03 07:04:57 -06:00
Gregory Nutt
09ab651e02 samv71-xult: Add support for the MRF24J40 radio and create a mrf24j40-starhub configuration. A few fixes to IPv6 and 6LoWPAN were required to have 6LoWPAN and Ethernet coexisting. Untested and expect some complexity in the bring-up. 2017-07-02 11:04:57 -06:00
Gregory Nutt
cf44fd6ec0 Add CLANG definitions in Kconfig and Toolchain.defs 2017-07-02 06:42:48 -06:00
Gregory Nutt
1c5ec07414 arch/: Remove dangling space at the end of lines. 2017-06-28 13:16:48 -06:00
Gregory Nutt
aa1708e7c0 6LoWPAN: Update README; fix duplicate and bad memcpy in loopback driver. 2017-06-26 10:53:57 -06:00
raiden00pl
715d6fa9ff stm32f33xxx_rcc: cleanup + move hrtim clock source selection 2017-06-26 18:30:10 +02:00
raiden00pl
aead2b2afd stm32f33xxx_rcc.h: fix typo 2017-06-26 18:26:59 +02:00
Juha Niskanen
56eeb40958 STM32L4 serial: Allow configuring Rx DMA buffer size 2017-06-26 09:19:42 -06:00
Juha Niskanen
90ccdf287d STM32 L4 DMA: Correct USART3_RX bad channel definition 2017-06-21 08:40:33 -06:00
David Sidrane
345ea957cf Merged in david_s5/nuttx/upstream_kinetis (pull request #414) 
Kinetis:I2C fixed mis-placed kinetis_i2c_endwait

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2017-06-20 20:22:17 +00:00
David Sidrane
839a6e09f4 Kinetis:I2C fixed mis-placed kinetis_i2c_endwait 
Fixed accedently replaced post with wait.
 2017-06-20 10:01:35 -10:00
Gregory Nutt
5de74441a6 Costmetic change from review of last PR 2017-06-20 13:33:14 -06:00
David Sidrane
1ee03d7500 Merged in david_s5/nuttx/upstream_kinetis (pull request #413) 
Kinetis:I2C driver added I2C3, reference counting and reset

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2017-06-20 19:31:38 +00:00
David Sidrane
9e0f583774 Kinetis:I2C driver added I2C3, reference counting and reset 
Refactored the driver to support reference counting and reset
   added I2C3
 2017-06-20 08:34:12 -10:00
Sebastien Lorquet
0bf4893b2c STM32: Allow clock frequencies > 168 Mhz on stm32f427/429. We need to enable the power overdrive for this case. This patch allows the required bits to be set in proper sequence. It also modifies the local register access operations to allow more than 16-bit registers. 2017-06-20 11:56:54 -06:00
Juha Niskanen
326ab01a91 STM32 F7: Set I2C4 SDA and SCL pins to open drain mode 2017-06-20 08:06:30 -06:00
Juha Niskanen
2c548a4e58 STM32 L4: I2C4 was writing to wrong RCC registers 2017-06-20 08:04:09 -06:00
Gregory Nutt
47ad81b3e5 Trivial spelling fix 2017-06-20 08:02:42 -06:00
Pekka Ervasti
2eb782961f STM32 L4: Set I2C SDA and SCL pins to open drain mode. 2017-06-20 07:59:27 -06:00
Jussi Kivilinna
a1ee9547f3 stm32_adc: invalidate dma buffer before use. Missing invalidation caused old samples being fetched from cache. 2017-06-19 07:52:19 -06:00
raiden00pl
c29c4e2ec2 stm32_hrtim: remove unneeded definitions 2017-06-18 18:08:25 +02:00
raiden00pl
4e0f45f252 stm32_hrtim: fix initialization bug, minor changes 2017-06-18 18:06:37 +02:00
raiden00pl
cd30545cd9 stm32_hrtim: ADC triggering and DAC synch events 2017-06-18 15:26:39 +02:00
raiden00pl
96e639262a stm32_hrtim: add hrtim ops 2017-06-18 11:01:36 +02:00
raiden00pl
797e286cb0 stm32_hrtim: timers mode configuration 2017-06-18 09:28:05 +02:00
raiden00pl
dfeffefa69 stm32_hrtim: typo 2017-06-18 08:02:15 +02:00
Gregory Nutt
0024840f7d Trivial, cosmetic changes from review of last PR 2017-06-17 14:44:11 -06:00
raiden00pl
b48a86ee33 Merge remote-tracking branch 'upstream/master' 2017-06-17 22:18:03 +02:00
raiden00pl
4d9d3c4a9c stm32_hrtim: cosmetics 2017-06-17 22:12:56 +02:00
raiden00pl
5e3360b8b9 stm32_hrtim: faults and events configuration 2017-06-17 21:56:11 +02:00
David Sidrane
c79d4d1988 stm32:flash add CONFIG_STM32_STM32F469 to list defining OPTCR1 2017-06-16 14:16:32 -10:00
Gregory Nutt
5245cbc6f5 STM32 SPI/I2S: Back out a bad pin mapping change from 4ab2a3661e. Try to staighten out some I2C3 and SPI3 pin configuration stuff. 2017-06-16 09:34:22 -06:00
Sebastien Lorquet
4d9be9bc20 STM32 F4 FLASH: Enable/disable the flash write protection on any sector. I have verified it to work on the stm32f427. 2017-06-16 08:46:57 -06:00
raiden00pl
bd7bee5db0 stm32_hrtim: structures for deadtime and chopper, cosmetics 2017-06-16 11:36:23 +02:00
David Sidrane
64e3dc5e8b Merged in david_s5/nuttx/upstream_samv7_twi (pull request #399) 
samv7:twihs driver add reference counting

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2017-06-15 21:45:07 +00:00