Gregory Nutt
08c883b6e8
STM32 F7: Add low level serial console support
2015-07-18 16:24:02 -06:00
Gregory Nutt
d64058d36e
STM32 F7: Bring in other EXTI related files from STM32 F4
2015-07-18 16:00:00 -06:00
Gregory Nutt
5f9b0b3a2f
STM32 F7: Add USART/UART register definition
2015-07-18 15:58:59 -06:00
Gregory Nutt
12f04f8500
STM32 F7: Add heap initializatino logic; Clone the STM32 CCM allocator as the F7 DTCM allocator
2015-07-18 12:52:24 -06:00
Gregory Nutt
465d7fe8c5
STM32 F7: Add PWR register definitions
2015-07-18 11:55:35 -06:00
David Sidrane
5e1a50c93e
STM32: Oops. Some STM32 F7 edits accidentally went into STM32 files ;(. Fixed by David Sidrane
2015-07-18 11:05:44 -06:00
Gregory Nutt
4a5f66481d
STM32 F7: Add FLASH and SYSCFG header files
2015-07-18 10:06:44 -06:00
Gregory Nutt
4f307ba36a
STM32F7: Clone GPIO support from the STM32 F4
2015-07-18 08:34:07 -06:00
Gregory Nutt
9c78772fce
STM32 F7: Add RCC clock configuration logic from STM32 F429
2015-07-17 17:39:33 -06:00
Gregory Nutt
cbaf241078
STM32 F7: Fix input clock source to SysTick
2015-07-17 16:38:47 -06:00
Gregory Nutt
6f5aa9ae21
STM32F7: Add GPIO header files
2015-07-17 15:43:51 -06:00
Gregory Nutt
d722792487
STM32 F7: Add RCC header files
2015-07-17 13:52:10 -06:00
Gregory Nutt
f45f0ab59a
STM32 RCC: Fix some more typos in STM32 RCC header files
2015-07-17 12:16:29 -06:00
Gregory Nutt
bd711c038d
STM32 RCC: Fix what looks like a double paste
2015-07-17 12:00:46 -06:00
Gregory Nutt
7eb5e7f9ec
STM32F746G-DISCO: Getting closer to a build
2015-07-17 11:47:16 -06:00
Sebastien Lorquet
7f7082f938
Extend STM32 Ethernet operating frequency to 180MHz:
...
-Extend frequency range options to 180 MHz for STM32 ETH_MACMIIA_CR
-Fix a typo in a frequency range option in LPC43
-Only configure the PPS GPIO if the PTP protocol is enabled
From Sebastien Lorquet
2015-07-17 07:44:12 -06:00
Gregory Nutt
8e4f3bddb6
Add CONFIG_NETDEV_LATEINIT that can be used to suppress calls to up_netinitialize() from early initialization
2015-07-17 07:20:16 -06:00
Gregory Nutt
a7a7ec8850
STM32 F7: Misc naming fixes
2015-07-16 19:49:20 -06:00
Gregory Nutt
3583f8c1dc
STM32 F7: Add more configuration selections
2015-07-16 18:30:40 -06:00
Gregory Nutt
05676a233c
STM32 F7: Add pin multiplexing definitions
2015-07-16 16:31:02 -06:00
Gregory Nutt
d8915e9dc6
Add include/chip.h definitions and configuration support for the STM32 F7
2015-07-16 08:47:25 -06:00
Gregory Nutt
eb64a6c238
Add STM32 F7 memory map header file
2015-07-15 16:24:03 -06:00
Gregory Nutt
2bdca23c92
STM32F7: Bring over a couple more Cortex-M7 files from SAMV7
2015-07-15 14:51:41 -06:00
Gregory Nutt
be16a06857
Create a src directory for the STM32F7 (not much in it yet)
2015-07-15 14:32:28 -06:00
Gregory Nutt
1ed5f5a3ed
STM32: Move STM32F42xxx IRQ definitions out of stm32f40xxx_irq.h into their own stm32f42xxx_irq.h header file
2015-07-15 13:52:20 -06:00
Gregory Nutt
629b37deec
STM32: Fix a minor error in new STMF42* header files
2015-07-15 13:21:39 -06:00
Gregory Nutt
abbfbb0716
STM32: Move STM32F42xxx vector definitions out of stm32f40xxx_vector.h into their own stm32f42xxx_vector.h header file
2015-07-15 13:02:55 -06:00
Gregory Nutt
0d0bbafbc5
STM32: Move STM32F42xxx SYSCFG definitions out of stm32f40xxx_syscfg.h into their own stm32f42xxx_syscfg.h header file
2015-07-15 12:54:15 -06:00
Gregory Nutt
7666fde938
STM32: Move STM32F42xxx RCC definitions out of stm32f40xxx_rcc.h into their own stm32f42xxx_rcc.h header file
2015-07-15 12:50:04 -06:00
Gregory Nutt
987c010c1f
STM32: Move STM32F42xxx DMA definitions out of stm32f40xxx_dma.h into their own stm32f42xxx_dma.h header file
2015-07-15 12:38:33 -06:00
Gregory Nutt
1d7789caa6
STM32: Move STM32F42xxx pinmap definitions out of stm32f40xxx_pinmap.h into their own stm32f42xxx pinmap.h header file
2015-07-15 12:28:45 -06:00
Gregory Nutt
3efe60bb6d
STM32 F7: Add interrupt vector definitions
2015-07-15 10:54:03 -06:00
Alan Carvalho de Assis
3f68755997
SAML21" Fix small typo. It should be 2-Wire I2C instead of 1-Wire. From Alan Carvalho de Assis.
2015-07-12 12:17:42 -06:00
Alan Carvalho de Assis
82fd1536a6
AMDL: Add support to Peripheral as Output with Read back. From Alan Carvalho de Assis.
2015-07-12 09:23:40 -06:00
Gregory Nutt
1f5e16dc95
Fix some warnings/errors detected by nuttx/tools/testbuilds.sh
2015-07-10 18:41:26 -06:00
Janne Rosberg
3fdfae16b7
samdl/sam_usb.h: fix USBDEV_CTRLB_SPDCONF defines Datasheet 03-2015 and 06-2015 is wrong. These defines are correct verified with analyser and also same values are used on Atmel xdk-asf-3.24.2 sources. From Janne Rosberg.
2015-07-10 15:23:41 -06:00
Janne Rosberg
02979feb7b
samdl/saml_usb.h: fix wrong EP offset calculation. From Janne Rosberg
2015-07-10 15:21:37 -06:00
Janne Rosberg
b32d747212
Fix some typos. From Janne Rosberg
2015-07-10 15:19:24 -06:00
Janne Rosberg
d6a51360f1
samdl: fix USBDEV_PKTSIZE_BCNT size. From Janne Rosberg
2015-07-10 15:15:55 -06:00
Alessandro Temil
d4cd35af5f
More changes to LPC3450 pin configuration: The hardware ETM pins will not toggle unless the SLEW FAST bit is set. From Alessandro Temil.
2015-07-09 13:36:22 -06:00
Alessandro Temil
d687bedf36
Correct some LPC4350 GPIO pin configurations. From Alessandro Temil
2015-07-09 12:09:00 -06:00
Gregory Nutt
56e4189a73
SAMD21: Correct some GCLK ID definitions for SERCOM
2015-07-06 09:26:49 -06:00
Gregory Nutt
ef5531b30b
SAMD21: Last fix to header files caused a compile problem because logic used a value which is no longer available for the SAMD21
2015-07-04 13:18:30 -06:00
Gregory Nutt
724c1eacaa
Add support for a BOARDIOC_RESET boardctl() command. Enable configuration options to support BOARDIOC_RESET for ARMv6-M and ARMv7-M
2015-07-04 10:39:24 -06:00
Gregory Nutt
36ddd9f691
Simulatin: Save the intial terminal mode and restore this before terminating. Otherwise, the NSH shutdown command leaves the console in raw mode
2015-07-04 08:43:10 -06:00
Gregory Nutt
749907cbbe
sim configuration: Add support for board_app_initialize() which is needed when CONFIG_LIB_BOARDCTL=y
2015-07-04 08:16:45 -06:00
Gregory Nutt
8db3a7a13e
Add a board_app_initilize() stub function needed by the simulatin when CONFIG_LIB_BOARDCTL=y
2015-07-04 07:35:14 -06:00
Gregory Nutt
37e681f89a
Implementment board_power_off() for the simulation platform.
2015-07-04 07:22:38 -06:00
Gregory Nutt
2e5bef56f2
SAMD20/1: Fix some typos found by inspecting header files
2015-07-04 07:19:52 -06:00
Gregory Nutt
6129df90d6
PIC32 USB device: Fix some backward conditional compilation; fix some warnings
2015-07-03 14:37:46 -06:00
Gregory Nutt
35bd9756ff
PIC32 SPI: Fix some backward conditional compilation
2015-07-03 14:36:56 -06:00
Gregory Nutt
e7177afca4
MIPS32 header: Missing comma in prototype. How did that happen
2015-07-03 14:36:19 -06:00
Gregory Nutt
b8976adfb3
SAM4L: GPIO interrupts are not yet supported; can't compile sam_gpioirq.c yet
2015-07-03 09:33:52 -06:00
Gregory Nutt
797aa0a138
Power off support now depends on CONFIG_ARCH_HAVE_POWEROFF
2015-07-03 06:53:51 -06:00
Gregory Nutt
004c076985
Correct some issues introduced in the last commit
2015-07-02 17:54:05 -06:00
Gregory Nutt
c3290fdabd
Modify board_power_off() so that is is called only via boardctl()
2015-07-02 17:09:54 -06:00
Gregory Nutt
19320d157a
Move prototype of board_power_off() to include/nuttx/board.h where it belongs
2015-07-02 16:25:31 -06:00
Gregory Nutt
51df91e93d
STM32 RTCC: Eliminate a warning when ALARM support is enabled
2015-07-02 15:02:59 -06:00
Gregory Nutt
1839d132f0
Add a dummy arch_invalidate_icache because for symmetry in the naming of cache operations
2015-07-02 11:13:23 -06:00
Gregory Nutt
46fec91b12
Remove a warning
2015-07-01 18:25:13 -06:00
Gregory Nutt
6df1d2823f
Fix misc. compilation error/warning detected by tools/testbuild.sh
2015-07-01 14:33:37 -06:00
Gregory Nutt
dbc5f910fc
Fix some typos in header files
2015-07-01 11:45:08 -06:00
Gregory Nutt
c73745bede
lpc214x USB device: Fix a warning
2015-07-01 10:25:14 -06:00
Gregory Nutt
d20dbf5054
LPC17xx: Fix a warning about an unused local variable
2015-07-01 09:36:39 -06:00
Gregory Nutt
92f9876f75
Fix a Cortex-A compilation error in the vfork() logic when system calls are enabled in modes other than CONFIG_BUILD_KERNEL.
2015-07-01 08:34:51 -06:00
Gregory Nutt
77285beeca
DM320: GIO header uses get/putreg functions and so should include up_arch.h
2015-07-01 08:01:49 -06:00
Gregory Nutt
a1676a177d
arch/arm/src/sama5/sam_ehci.c: Fix some bad conditional compilation that left a function undefined if CONFIG_USBHOST_ASYNCH is not selected.
2015-07-01 07:04:02 -06:00
Alan Carvalho de Assis
928c88a5f6
Port some per-process stack dumping logic from ARMv7-M to ARMv6-M. From Alan Carvalho de Assis
2015-06-30 11:42:48 -06:00
Alan Carvalho de Assis
39b77fbe8b
Fix Cortex-M0 assembly error when the interrupt stack is enabled
2015-06-30 08:41:47 -06:00
Gregory Nutt
fb926e7283
Fix references to the no-longer-existent misc/ directory in comments, README files, and documentation
2015-06-28 08:08:57 -06:00
Gregory Nutt
27bdf5d8a1
SAMD21: Update SPI and I2C header files for SAMD21 support
2015-06-22 13:12:00 -06:00
Max Neklyudov
8438b8eee8
SAM3/4: Add a TWI driver for the SAM4CM. From Max Neklyudov.
2015-06-22 09:32:15 -06:00
Gregory Nutt
911b1ce68e
SAMD21: Update WDT and EVSYS header files for SAMD21 support
2015-06-22 09:15:54 -06:00
Gregory Nutt
52803ee23b
Back out another error introduced with commit 02c33f66c5a8be774034cd40e4125e9323c7b4d8. Causes an infinite loop in up_lowputc().
2015-06-22 07:48:29 -06:00
Max Neklyudov
0f19a33b3d
SAM4CM: Fix SUPC register definitions. From Max Neklyudov
...
Remove conditional logic form non-SAM4CM parts (Gregory Nutt)
2015-06-22 06:52:57 -06:00
Max Neklyudov
e4d7b311b7
sam4cm: add CFB and MAC AES modes. From Max Neklyudov
2015-06-22 06:42:37 -06:00
Max Neklyudov
bdf0b6a9ab
Back out an error introduced with commit 02c33f66c5a8be774034cd40e4125e9323c7b4d8. Causes an infinite loop in up_lowputc(). From Max Neklyudov.
2015-06-22 06:19:45 -06:00
Gregory Nutt
c5bc7cc120
SAMD21: Update SAMD SYSCTRL and NVMCTRL definitions for the SAMD21
2015-06-21 11:40:23 -06:00
Gregory Nutt
e7e7b465d5
SAMD21: Update fuse definitions for the SAMD21
2015-06-21 10:20:23 -06:00
Gregory Nutt
4a38276ff9
SAMD21: Extend SAMD USART support to include SAMD21 differences
2015-06-21 09:17:01 -06:00
Gregory Nutt
780cb0911d
Add board configuration for the SAMD21 Xplained board
2015-06-21 07:48:46 -06:00
Gregory Nutt
379a1e114f
SAMD21: Add pin multiplexing definitions
2015-06-20 18:55:23 -06:00
Gregory Nutt
97d697f7c4
SAMD2x: Eliminate a warning
2015-06-20 16:06:01 -06:00
Gregory Nutt
5eeabf29dd
Missed a few in previous commit
2015-06-20 15:55:56 -06:00
Gregory Nutt
1d3abb18e4
SAMD21: Update GCLKs for SAMD21
2015-06-20 15:55:21 -06:00
Gregory Nutt
d9863f11f6
SAMD21: Update PM definitions for SAMD21 support
2015-06-20 15:32:57 -06:00
Gregory Nutt
28ae44eb02
SAMD21: Add memory map header file
2015-06-20 15:02:25 -06:00
Gregory Nutt
66a960dacd
SAMD21: Add interrupt vectors definitions
2015-06-20 14:40:47 -06:00
Gregory Nutt
15c8e2e00a
SAMD21: Add interrupt vectors definitions
2015-06-20 14:40:36 -06:00
Gregory Nutt
d00ed2d780
Add configuration support for SAMD21
2015-06-20 14:31:53 -06:00
Gregory Nutt
e013bb49a8
SAML21 USB: Add host side register defintiions
2015-06-20 11:09:35 -06:00
Gregory Nutt
d298b8048c
SAML21 USB: Add device side register defintiions
2015-06-20 09:25:06 -06:00
Gregory Nutt
b6629c0745
SAML21: Partial USB header file
2015-06-20 07:13:35 -06:00
Gregory Nutt
b39cd9ee93
Refresh SAMV71-Xult configurations
2015-06-17 12:01:33 -06:00
Gregory Nutt
ad7eb4e24f
Update some comments
2015-06-17 06:31:30 -06:00
Gregory Nutt
3c06202152
SAM4L DMA: Need separate peripheral IDs for TX and RX
2015-06-17 06:23:07 -06:00
Alan Carvalho de Assis
2a10db2dbf
SAMA5D TWI: Fix typo in driver initialization logic.
2015-06-17 06:13:46 -06:00
Gregory Nutt
a5175456ed
SAML21: Add OPAMP register definition header file
2015-06-16 15:54:49 -06:00
Gregory Nutt
61543db536
SAML21: Add DAC register definition header file
2015-06-16 13:32:27 -06:00
Gregory Nutt
5ee4cf6ae4
SAML21: Add AES register definition header file
2015-06-16 12:22:49 -06:00
Gregory Nutt
b5cc782205
SAML21 DMAC: Mostly cosmetic changes
2015-06-16 10:39:21 -06:00
Gregory Nutt
08dcb6dc8d
SAML21 DMA: Fix a logic error. Since the write back descriptors overly the base descriptors, we need to do some special things in order to correctly free any allocated descriptors
2015-06-16 10:07:26 -06:00
Gregory Nutt
12ca013ff4
SAMV7: Add RTC register definition header file
2015-06-16 07:23:47 -06:00
Gregory Nutt
b1230eb951
Fix a comment
2015-06-15 15:09:23 -06:00
Gregory Nutt
48b7631dbb
SAMV7: Add MCAN register definition header file
2015-06-15 11:37:59 -06:00
Gregory Nutt
9511364a03
SAML21 minor stuff
2015-06-14 14:27:58 -06:00
Gregory Nutt
01c5c63369
SAML21: Completes first rought cut of DMAC driver
2015-06-14 13:29:59 -06:00
Gregory Nutt
4f8db55462
SAML21 DMA: BASEADDR and WRBADDR can only be written while the DMAC is disabled
2015-06-14 11:46:44 -06:00
Gregory Nutt
fb6252aa6f
SAML21 DMA: More DMA logic. Still incomplete
2015-06-14 11:26:52 -06:00
Gregory Nutt
c2f2919ab0
SAML21 DMA: Add logic to set up base and writeback table addresses
2015-06-14 10:51:10 -06:00
Gregory Nutt
1f6f3d7bb2
Fix reversed arguments in SAML21 DMA logic
2015-06-14 08:52:39 -06:00
Gregory Nutt
75077f4728
SAML21: Add DMA descriptor management logic
2015-06-14 08:48:25 -06:00
Gregory Nutt
8c8b2d926b
SAMD21: Add build framework for DMA support. Nothing there yet except for skeletal logic taken from SAM3/4.
2015-06-13 15:06:37 -06:00
Gregory Nutt
26518df3ed
SAML21: Add DMAC register definition header file
2015-06-13 10:16:07 -06:00
Gregory Nutt
29136e51cc
Clean up and review of header files for conformance to standards
2015-06-12 19:26:01 -06:00
Gregory Nutt
c07a9632cc
Clean up and review of header files for conformance to standards
2015-06-12 19:17:42 -06:00
Gregory Nutt
7bd3d5eaf1
Clean up and review of header files for conformance to standards
2015-06-12 19:00:52 -06:00
Gregory Nutt
d6ce8220fd
Clean up and review of header files for conformance to standards
2015-06-12 18:07:47 -06:00
Gregory Nutt
46148524a9
SAM4S/4E: Eand default loop optimiozation if EEFC_FMR configuration. From Marco Aurélio da Cruz
2015-06-11 14:35:49 -06:00
Gregory Nutt
4b11c9da2c
Kinetis: Add up-sysemreset.c to Make.defs
2015-06-11 12:08:45 -06:00
Gregory Nutt
4712c23218
Make some imported files a little closer to the NuttX coding standard
2015-06-11 09:14:44 -06:00
Gregory Nutt
85d88d364f
Kinetis: Add logic to set CFM protect area to all 0xff in all configurations
2015-06-11 08:39:40 -06:00
Gregory Nutt
7fab748667
STL32 F15x: stm32_stdclockconfig() was calling stm32_pw_setvos() which accessed PWR_CR via an inactive APB. From Juha Niskanen.
2015-06-11 08:09:36 -06:00
Gregory Nutt
98b2034cdf
Teensy-3.1: Add user LED support
2015-06-10 17:19:26 -06:00
Gregory Nutt
ad2a529624
RAM functions should have noinline attribute
2015-06-10 14:51:42 -06:00
Gregory Nutt
cb1a6e7954
Cosmetic
2015-06-10 14:20:11 -06:00
Gregory Nutt
0742ee3c3e
Add support for MK20DN--VLH5 and MK20DX---VLH5. Needed for backward compatible support for Teensy-3.0
2015-06-10 11:45:17 -06:00
Gregory Nutt
075261f5ee
SAML21: Since SERCOM5 usese a different output channel, it will also need a different GCLK generator
2015-06-10 08:38:35 -06:00
Gregory Nutt
9be151cdbb
SAML21: A different SLOW clock must be used with SERCOM5
2015-06-10 08:18:05 -06:00
Gregory Nutt
f01c04f1a7
Add support for other members of the Kinetis MK20DX---VLH7 family; undate a README
2015-06-09 18:01:32 -06:00
Gregory Nutt
d1847d2e0b
Correct write to incorrect register in EFM32 SPI driver. From Pierre-noel Bouteville.
2015-06-09 12:50:30 -06:00
Gregory Nutt
13e8c0d5b1
Update/add README.txt files
2015-06-09 07:03:25 -06:00
Gregory Nutt
f3425d6298
Fix SAMA5 CAN frame construction. From Max Holtzberg.
2015-06-07 13:13:44 -06:00
Gregory Nutt
f875a26ed2
Add SPI GPIO pin initialization. From Pierre-noel Bouteville.
2015-06-05 14:26:21 -06:00
Gregory Nutt
0488df7cf3
Correct some comments. Noted by Jouko Holopainen
2015-06-04 08:12:58 -06:00
Gregory Nutt
e816afe161
LC17 Ethernet: Ignore 4-bit versin number when checking for PHY ID match
2015-06-03 19:47:10 -06:00
Gregory Nutt
03562269d4
Lincoln60: Add a network enabled NXH configuration (still does not yet build)
2015-06-03 18:48:08 -06:00
Gregory Nutt
7677cf72eb
LPC17 Ethernet: Add support for the Micrel KSZ8041 PHY.
2015-06-03 17:34:36 -06:00
Gregory Nutt
d9d6ff1d1b
Fix some memory sizing errors in refreshed defconfig files
2015-06-02 08:44:57 -06:00
Gregory Nutt
e6b8d2eebe
Refresh some Olimex LPC1766STK networking configurations
2015-06-02 08:12:44 -06:00
Gregory Nutt
1d697a18d1
Condition default value for CONFIG_ARMV7M_TARGET2_PREL on UCLIBCXX_EXCEPTION
2015-06-01 15:12:33 -06:00
Gregory Nutt
280e2ee385
Add support uClibc++ excpetions. This involves additional handling for relative relation types, additional support for unwinding, as well as additional changes. The culmination of a big effort fromo Leo Aloe3132
2015-06-01 14:16:18 -06:00
Gregory Nutt
73419e77f4
LPC17 Ethernet: Fix several compilation related issues when CONFIG_NET_NOINTS=y
2015-06-01 08:35:40 -06:00
Gregory Nutt
29b6f140e3
LPC17xx Ethernet: Improve CONFIG_NET_NOINTS implementation
2015-06-01 08:07:32 -06:00
Gregory Nutt
0c59dd2888
Fix a missing # in the previous commit
2015-05-31 13:26:13 -06:00
Gregory Nutt
4e811aa54d
Add basic support for the STM32F205RG. From SourceForge Ticket 40 (anonymous).
2015-05-31 13:06:26 -06:00
Gregory Nutt
a25d0908f8
Simulator: Add more name conversons. From Max Neklyudov
2015-05-29 08:20:06 -06:00
Gregory Nutt
38735fafeb
More missing semicolons after DEBUGASSERT
2015-05-27 13:32:39 -06:00
Gregory Nutt
d41b050526
Fix another missing semicolon after DEBUGASSERT
2015-05-27 11:49:19 -06:00
Gregory Nutt
d50761428c
LPC11: Fix hardcoded BAUD calculation. Is no configurable. From Alan Carvalho de Assis
2015-05-27 09:44:07 -06:00
Gregory Nutt
528275a77c
Fix some typos
2015-05-27 07:34:35 -06:00
Gregory Nutt
ac102d3f85
K20: Some preliminary pin definitions
2015-05-26 17:02:47 -06:00
Gregory Nutt
318345fb1d
Basic support for the Kinetis K20 architecture. Taken from PX4. This is the work of Jakob Odersky.
2015-05-26 15:03:35 -06:00
Gregory Nutt
cae38625f8
SAM4L: Fix some issues from loast commit. Now running off DFLL with source clock = XOSCK32K
2015-05-26 13:25:39 -06:00
Gregory Nutt
b96a141e8a
SAML21-Xlplained: Add options to enable XOSC32K and to use it as the DFLL source; NSH configure now uses DFLL with OSC16M source
2015-05-26 10:39:38 -06:00
Gregory Nutt
f055d4cac4
Logic that samples the free running counter reads the pending interrupt status regsiter and can cause interrupts to be lost. So, if when the status regsiter is read, the logic must also handle the timer overflow event. Found and fixed by Max Neklyudov
2015-05-26 08:09:10 -06:00
Gregory Nutt
fe175fbc16
SAMD20: Fixes the problem introduced with the SAML21 integration
2015-05-25 10:13:06 -06:00
Gregory Nutt
643a98a0a8
SAML21: Fix issue with open loop operation; Add configuration options to select clock source
2015-05-24 10:27:37 -06:00
Gregory Nutt
9649e564f9
LPC11xx: Use offsets instead of absolute address in look-up tables. This saves about 156 bytes of FLASH. From Alan Carvalho de Assis.
2015-05-24 07:49:38 -06:00
Gregory Nutt
6973337ccd
Fix numerous typos in configuration variable names. Tracked down by Alan Carvalho de Assis
2015-05-23 17:08:35 -06:00
Gregory Nutt
8e71f90d84
SAML21: Add missing support for GCLK8
2015-05-23 17:02:13 -06:00
Gregory Nutt
d495834882
SAML21: Several SERCOM fixes. No gets UART output, but at the wrong BAUD
2015-05-23 13:08:28 -06:00
Gregory Nutt
84ca7f4a46
SAM4L: Re-order some clock initialization. There was a dependency of GCLK0 on DFLL, but DFLL was being enabled after GCLK0
2015-05-23 11:01:22 -06:00
Gregory Nutt
41f9fb8c62
SAML21: Fix some register definitions; board OSC16M frequency
2015-05-23 10:54:51 -06:00
Gregory Nutt
09d1bc7060
LPC11xx: Add support for up_getc() which is needed for NSH if there is no file system. From Alan Carvalho de Assis.
2015-05-23 09:23:36 -06:00
Gregory Nutt
601aa6e358
SAMD/L: Change ordering of some initialization steps to match Atmel sample code. Add Errate 13134 support. SAML wait states changed to 1. Sample code is using 0
2015-05-23 08:55:06 -06:00
Gregory Nutt
d1aae43e2a
SAM4CM: Add support for optical mode for UART1. From Max Neklyudov.
2015-05-23 06:48:36 -06:00
Gregory Nutt
9140a0fcc4
Initial support for the NXP LPC11 family and the LPC1115 MCU in particular. Contributed by Alan Carvalho de Assis.
2015-05-22 14:14:09 -06:00
Gregory Nutt
1c82e961f5
SAML21. With these changes, the board now builds without error
2015-05-22 10:36:37 -06:00
Gregory Nutt
0eee2c40a8
SAML21: Rename sam_gclk.c to samd_gclk.c. Create saml_gclk.c with corrected logic for the SAML21
2015-05-22 07:28:19 -06:00
Gregory Nutt
2314cbd37e
SAML21 clock config: Fix a misthink in last commit. Move setting of ONDEMAND to after clock is enabled in most cases
2015-05-21 16:50:55 -06:00
Gregory Nutt
2478184c22
SAML21: Clean up a few more compilation issues
2015-05-21 16:23:15 -06:00
Gregory Nutt
a0b9e26aba
SAML21: Add logic to set MCLK CPU and related dividers
2015-05-21 13:40:34 -06:00
Gregory Nutt
ed47a08832
SAML21: Add FDPLL96M configuration logic
2015-05-21 11:52:38 -06:00
Gregory Nutt
786b292b1f
SAML21: Add logic to support GLCK peripheral channels; add logic to configure FDPLL lock timer and ref clock GCLKs
2015-05-21 10:47:41 -06:00
Gregory Nutt
544a789714
SAMD/L: Move GCLK configuration logic to its own C file
2015-05-21 10:07:42 -06:00
Gregory Nutt
4a60f1c9f5
STM32: Building stm32_rng.c should be conditioned on CONFIG_STM32_RNG, not CONFIG_DEV_RANDOM. From Juha Niskanen
2015-05-21 07:47:22 -06:00
Gregory Nutt
790d53bb06
SAM3/4 Serial: In NONBLOCKING mode serial does not receive bytes from UART. This happens because RX interrupt was disabled in the setup routine. To fix this I save interrupt configuration before uart shutdown and restore it after. From Max Neklyudov.
2015-05-21 07:06:47 -06:00
Gregory Nutt
bd2bbfe53a
Fixes for Tiva TM4C1294NCPDT. From Frank Sautter.
2015-05-20 18:34:15 -06:00
Gregory Nutt
ac2fe431aa
SAML21: Add some parameter checking for FDPLL96M
2015-05-20 13:51:40 -06:00
Gregory Nutt
5eae4c914a
Minor restructure for SAML21 FDPLL
2015-05-20 13:37:08 -06:00
Gregory Nutt
307d0d0e55
SAML21 minor cleanup
2015-05-20 13:00:39 -06:00
Gregory Nutt
8075f8ab84
SAML32: Update some DFLL logic
2015-05-20 12:26:49 -06:00
Gregory Nutt
7000cf8193
Fix SYNCBUSY wait for the SAML21
2015-05-20 11:49:24 -06:00
Gregory Nutt
321b54f49a
Updated EFM32 RTC driver from Pierre-noel Bouteville
2015-05-19 14:53:01 -06:00
Gregory Nutt
8980f72251
SAML21-Xplained: Update the cloned SAMD20-Xplained board configuration for specifics of the SAML21-Xplained
2015-05-19 14:32:09 -06:00
Gregory Nutt
23732e2c9b
SAMD/L: Hide differences in the way peripheral clocking is enabled behind macros. Some updates to saml_clockconfig.h + various fixes while working toward SAML21 build
2015-05-19 11:03:24 -06:00
Gregory Nutt
b94a8d7ee7
Clock configuration logic for the SAML21. Initial commit is just the SAMD20 clock configuration with some naming changes and does not compile
2015-05-19 07:02:58 -06:00
Gregory Nutt
792c76c4e6
Add saml_trng.h for SAML32
2015-05-19 06:31:48 -06:00
Gregory Nutt
0294384dd7
Add saml_eic.h for SAML21
2015-05-18 18:55:16 -06:00
Gregory Nutt
4458a34787
SAML21: Add interrupt header file + fix a few initial compile issues. Still a long way to go
2015-05-18 17:41:28 -06:00
Gregory Nutt
dfa87403b3
Add basic board build configurat for the SAML21 Xplained. Initial commit is jsut the SAMD20 Xplained with name changes and does not yet build
2015-05-18 13:16:32 -06:00
Gregory Nutt
c28a6a91f3
Rename sam_fuses.h to samd_fuses.h; add saml_fused.h for the SAML21
2015-05-18 11:59:53 -06:00
Gregory Nutt
aecb60a8e8
Rename sam_sercom.h to samd_sercom.h; Add saml_sercom.h for the SAML21
2015-05-18 10:54:50 -06:00
Gregory Nutt
317fb073ef
Rename sam_port.h to samd_port.h; add saml_port.h for the SAML21
2015-05-18 10:35:11 -06:00
Gregory Nutt
16a2d363f9
Rename sam_nvmctrl.h to samd_nvmctrl.h; add saml_nvmctrl.h for SAML21
2015-05-18 09:44:12 -06:00
Gregory Nutt
a8cf79da52
Add SAML21 SUPC header file
2015-05-18 07:25:30 -06:00
Gregory Nutt
54027c756e
Add saml_i2c_slave.h for the SAML21
2015-05-17 18:18:35 -06:00
Gregory Nutt
d0f236d855
Fix some mismatched C++ logic in header files
2015-05-17 16:51:18 -06:00
Gregory Nutt
2dc8fd6958
Rename sam_i2c_slave.h to samd_i2c_slave.h
2015-05-17 16:50:40 -06:00
Gregory Nutt
89379b0a45
Rename sam_i2c_master.h to samd_i2c_master.h; Add saml_i2c_master.h for SAML21
2015-05-17 16:42:37 -06:00
Gregory Nutt
0745a55c03
SAMD/L: Move content of chip/sam_memorymap.h to chip.h; move chip/sam_pinmap. to sam_pinmap.h for consistency with other header files
2015-05-17 15:34:51 -06:00
Gregory Nutt
aa74609424
Rename sam_spi.h to samd_spi.h; Add saml_spi.h for the SAML21
2015-05-17 15:22:52 -06:00
Gregory Nutt
9d0db0aa4f
Rename sam_usart.h to samd_usart.h; add saml_usart.h for the SAML21
2015-05-17 14:31:21 -06:00
Gregory Nutt
afc650b42a
samd_wdt.h should include sam_sercom.h
2015-05-17 13:39:11 -06:00
Gregory Nutt
10f0ca91b9
Rename sam_evsys.h to samd_evsys.h; Add saml_evsys.h for the SAML21
2015-05-17 12:54:53 -06:00
Gregory Nutt
3421f6ebb3
Rename sam_wdt.h to samd_wdt.h; Add saml_wdt.h for SAML21
2015-05-17 11:01:24 -06:00
Gregory Nutt
2f53158588
Add SAML21 RSTC register definitions
2015-05-17 10:41:21 -06:00
Gregory Nutt
2a9f38ef63
SAML21: Add PM header file
2015-05-17 10:09:20 -06:00
Gregory Nutt
3d89476aa2
SAML21: Rename chip/sam_pm.h to chip/samd_pm.h
2015-05-17 09:18:36 -06:00
Gregory Nutt
469ea85654
Rename sam_gclk.h to samd_gclk.h. Add saml_gclk.h
2015-05-17 08:06:56 -06:00
Gregory Nutt
4648c45218
SAML21: Add OSC32KCTRL header file
2015-05-16 15:49:22 -06:00
Gregory Nutt
370917bb5c
Add SAML21 OSCCTRL definitions
2015-05-16 13:33:09 -06:00
Gregory Nutt
bfb822380b
SAML21: Rename sam_clockconfig.c to samd_clockconfig.c. saml_clockconfig.c forthcoming.
2015-05-16 13:32:12 -06:00
Gregory Nutt
79d3684fb4
Add SAML21 MCLK header file
2015-05-16 11:02:19 -06:00
Gregory Nutt
8437a63f11
Rename the sam_sysctrl.h header file to samd_sysctrl.h since it does not apply to the saml
2015-05-16 11:01:45 -06:00
Gregory Nutt
05c245fc2d
SAML21: Add pin multiplexing definitions
2015-05-15 11:45:56 -06:00
Gregory Nutt
0f1eef72fe
SAML21: Flesh out SAML21 memory map
2015-05-15 09:30:25 -06:00
Gregory Nutt
d2a7a1ad9c
SAMA5 OHCI: Fix errors introduced with blind changes to match changes to LPC17 OHCI. Fix some handling for the case where we get a falso alarm transfer completion after disconnection/cancellation
2015-05-15 09:02:17 -06:00
Gregory Nutt
95ae90a246
LPC17 USB host: Fix some OHCI done head handling when a tranfer is cancelled
2015-05-15 08:29:45 -06:00
Gregory Nutt
9061809e2d
OHCI drivers: Try disabling bulk list when cancelling bulk transfers
2015-05-15 07:31:13 -06:00
Gregory Nutt
4dc10dbe85
Oop.. remove duplicate #else
2015-05-14 14:13:43 -06:00
Gregory Nutt
5ba5b5e24b
SAML21: Add configuration logic and placeholders for memory man and pin configruation header files
2015-05-14 14:02:50 -06:00
Gregory Nutt
ec2e922d17
Fix a missed renaming in a Kconfig file
2015-05-14 12:33:42 -06:00
Gregory Nutt
3ec627b02d
Rename SAMD directories and configuration variables to SAMDL so that the same build environment can support the SAML
2015-05-14 12:25:09 -06:00
Gregory Nutt
f1c51eea57
SAMA5D OHCI: Missing D-Cache flush
2015-05-14 11:10:15 -06:00
Gregory Nutt
0883ea1af0
USB host drivers: Cannot take semaphores in cancel() method
2015-05-14 09:58:21 -06:00
Gregory Nutt
5fad63c28a
STM32/EFM32 USB host drivers. Remove some detritus left from previous change
2015-05-14 07:55:55 -06:00
Gregory Nutt
77e6e913bf
LM3S Ethernet: More semicolons needed after modified DEBUGASSERT macro. From Brennen Ashton
2015-05-14 06:35:40 -06:00
Gregory Nutt
f56260f1e1
Update README
2015-05-13 13:30:26 -06:00
Gregory Nutt
99734ee2ff
Fix several defien -> define. Thanks Pierre
2015-05-13 06:33:17 -06:00
Gregory Nutt
14d99a0ef2
SAMV7 TWIHS: Fix logic that performs multi-message tranfers with and without repeated starts. This change is the final piece that was required to get the maXTouch Xplained Pro workding.
2015-05-12 17:56:35 -06:00
Gregory Nutt
178321fb0e
KL: Fix offset to the TPM status register. From Michael Hope.
2015-05-12 07:08:33 -06:00
Gregory Nutt
10bfcaf939
Fix typo in arch/arm/include/kl/chip.h header file. From Michael Hope
2015-05-12 07:05:29 -06:00
Gregory Nutt
11b79e6714
EHCI HCDs: Check for transfer in progress before attempting cancellation
2015-05-11 12:12:19 -06:00
Gregory Nutt
c2c7dadf0f
The USB host cancellation now applies to all transfers and so it no longer conditional
2015-05-11 12:04:03 -06:00
Gregory Nutt
cac9879ad2
EHCI HCDs will now support cancellation of syncrhonous transfers
2015-05-11 11:43:31 -06:00
Gregory Nutt
3f092b8f9c
STM32 and EFM32 host will now support cancellation of synchronous methods
2015-05-11 11:15:28 -06:00
Gregory Nutt
102554adfe
OHCI HCDs will not support cancellation of syncrhonous transfers
2015-05-11 10:36:17 -06:00
Gregory Nutt
0536435ff8
Correct an error recently introduced in the STM32 and EFM32 USB host controller drivers.
...
The test for data partially transferred is incorrectec: chan->xfrd != xfrlen
Should be chan->xfrd > 0
From Ronly XLN.
2015-05-11 09:04:25 -06:00
Gregory Nutt
32a4131f92
Fix a cut'n'paste error in the last commit
2015-05-10 10:23:23 -06:00
Gregory Nutt
9e07b2deb1
OHCI: Fix length calculation in all OHCI drivers: CBP==0 means that the entire buffer was transferred, not that a null packet was tranaferred
2015-05-10 10:01:22 -06:00
Gregory Nutt
6e5a4e8b5e
Add EXTI line definitions for the STM32L family.
2015-05-09 09:03:14 -06:00
Gregory Nutt
4250bb5138
STM32 F3: Add DBGMCU register definitions for the F3 family. From Greg Meiste.
2015-05-09 06:05:17 -06:00
Gregory Nutt
aaaa8f2e9d
Adds support for STM32F302K8 and STM32F302K6. From Ben Dyer via PX4/David Sidrane.
2015-05-08 14:10:55 -06:00
Gregory Nutt
780c81f130
USB host CDC/ACM fixes. Still kind of buggy
2015-05-08 10:58:41 -06:00
Gregory Nutt
b8483aea40
In go_os_start that sets the IDLE thread stack coloration, mov does not set condition codes which are tested by the following beq. Need to use movs instead. Noted by David Sidrane
2015-05-07 20:36:08 -06:00
Gregory Nutt
2325f2c529
kl: enable the clocks to UART1 and UART2. The previous version would cause a hard fault on startup due to the modules not being clocked. Also drop the GPIO configuration as it's done during kl_start(). From Michael Hope.
2015-05-07 17:17:54 -06:00
Gregory Nutt
292cb9fe2f
kl: fix PWM debugging. TPM1 and TPM2 have two channels instead of six and will hard fault if you try to read the missing channels. From Michael Hope.
2015-05-07 17:17:53 -06:00
Gregory Nutt
d1da52a018
Misc improvements to the CDC/ACM host driver, mostly related to parsing the configuration descriptor. Still does not work.
2015-05-07 10:02:51 -06:00
