Gregory Nutt
|
8065ab73a4
|
WM8904: Add reset logic to put the part back in its initial state after playing each WAV file. Base samles per second on frame length, not bits-per-sample. Use a different frame length for 8-bit and 16-bit data
|
2014-08-04 19:26:43 -06:00 |
|
Gregory Nutt
|
dc8b040573
|
WM8904: Correct calculation of bitrate (I am not sure why this is correct). LR clock divisor is now a constant 32-bits per frame. Conditioned out interrupt logic; it is not being used. Also added some FLL lock interrupt/poll logic (which was subsequently disabled).
|
2014-08-04 15:08:20 -06:00 |
|
Gregory Nutt
|
c68e42c437
|
WM8904: Restore mystery bit in setup that was accidentally tossed before
|
2014-08-03 19:29:02 -06:00 |
|
Gregory Nutt
|
678c0aac8d
|
WM8904: Tried disabling the SYSCLK while updating the FLL. Didn't help but is still probably a correct change
|
2014-08-03 18:44:51 -06:00 |
|
Gregory Nutt
|
72b739fbcb
|
WM8904: Add logic to analyze BCLK setup
|
2014-08-03 17:11:38 -06:00 |
|
Gregory Nutt
|
b9384ced60
|
WM8904: Various updates to get BCLK/LRCLK correct. Acutally worse the parent, but I think is on the right track
|
2014-08-03 13:28:20 -06:00 |
|
Gregory Nutt
|
b0d0ac72a7
|
WM8904 driver: Disable the FFL at the end of playing.
|
2014-08-02 14:28:10 -06:00 |
|
Gregory Nutt
|
a2d6c0c2b4
|
WM8904: Add logic to program the FLL to achieve the bitrate
|
2014-08-02 12:40:57 -06:00 |
|
Gregory Nutt
|
f4bc0ad99a
|
WM8904: Add an option to control WM8904 register dumping
|
2014-08-02 06:52:42 -06:00 |
|
Gregory Nutt
|
7e576e308a
|
WM8904 I2C: Fix an error in writing. I am not sure why this fixes the problem
|
2014-08-01 18:22:33 -06:00 |
|
Gregory Nutt
|
e59bb45b33
|
Add debug logic to dump WM8904 registers
|
2014-08-01 18:07:20 -06:00 |
|
Gregory Nutt
|
3e1e15b04a
|
WM8904: Can't reset the WM8904 unless we also reinitiailize all registers. Try to get a saner timeout based on sample rate, bits-per-sample, and buffer size.
|
2014-07-31 19:14:41 -06:00 |
|
Gregory Nutt
|
e214382264
|
Audio: Change how the end of the audio stream is detected by the leaf audio component. This used by be done by looking for the first partial buffer. That does not work with the in-place sub-sampling performed by the PCM decoder: That always reduces the size of the buffer so that all buffers only partially filled by the time they get to the leaf. Now, a flag is set in the audio buffer flags set to indicate the final buffer in the stream.
|
2014-07-31 16:36:09 -06:00 |
|
Gregory Nutt
|
487a672d76
|
WM8904: Was not saving i2s interface instance
|
2014-07-31 15:00:45 -06:00 |
|
Gregory Nutt
|
9c80dfb31c
|
Updated README file, cosmetic changes to comments and debug output
|
2014-07-30 10:19:09 -06:00 |
|
Gregory Nutt
|
be8fe9a311
|
Costmetic update to comments
|
2014-07-29 20:03:52 -06:00 |
|
Gregory Nutt
|
75daeb75a3
|
Fix some compile problems with the WM8904 driver due to recent audio subsystem changes
|
2014-07-28 16:33:25 -06:00 |
|
Gregory Nutt
|
c9f15ffd3d
|
PCM: First cut at fast forward by subsampling
|
2014-07-27 18:33:17 -06:00 |
|
Gregory Nutt
|
0cc9b06eca
|
Add definitions to support fast forward and rewind configuration
|
2014-07-27 12:25:40 -06:00 |
|
Gregory Nutt
|
014dd77237
|
Audio: Fix some compilation issues introduced with some of the recent changes
|
2014-07-25 11:27:29 -06:00 |
|
Gregory Nutt
|
08fa9a9d54
|
Costmetic change
|
2014-07-25 10:04:20 -06:00 |
|
Gregory Nutt
|
0399be55d3
|
Fix some compile errors when audio DEBUG is enabled
|
2014-07-24 15:05:13 -06:00 |
|
Gregory Nutt
|
22f8503d0a
|
Convert ac_format and ac_controls to unions to make access a little cleaner
|
2014-07-24 10:21:04 -06:00 |
|
Gregory Nutt
|
dba43a9c75
|
Audio: Get rid of the decoder->driver IOCTLs that I added a couple of commits back; Use existing configure method
|
2014-07-24 09:56:39 -06:00 |
|
Gregory Nutt
|
e100726a41
|
Fix a type in the audio Kconfig file, UDIO->AUDIO
|
2014-07-23 14:48:21 -06:00 |
|
Gregory Nutt
|
72133f5d95
|
Add ioctls so that PCM decoder can configure the driver bitrate, num channels, and sample width
|
2014-07-23 12:21:04 -06:00 |
|
Gregory Nutt
|
516b343666
|
Flesh out missing PCM decoder methods
|
2014-07-23 11:58:43 -06:00 |
|
Gregory Nutt
|
ca7d7c34ce
|
Audio: Add a NULL audio device that can be used to simply unit-level testing of audio decoders
|
2014-07-23 10:12:32 -06:00 |
|
Gregory Nutt
|
cfa76b5278
|
Flesh out a few more PCM methods, still incomplete. Re-vision PCM structure definition
|
2014-07-22 19:23:05 -06:00 |
|
Gregory Nutt
|
d7a9633dcd
|
Rename pcm_decode.h to pcm.h since it will hold more than just decoding definitions. Fix some porting errors like idbg should auddbg, etc. Add wav file header and a few low-level wav utilities.
|
2014-07-22 15:54:56 -06:00 |
|
Gregory Nutt
|
8548c64915
|
Remove WM8904 driver unused paramters, clean-up comments, remove some kruft in capability reporting
|
2014-07-22 11:47:27 -06:00 |
|
Gregory Nutt
|
05e82d4f01
|
Add missing configuration option to select the MAX11802 touchscreen controller
|
2014-07-22 07:09:48 -06:00 |
|
Gregory Nutt
|
0b3ff976ff
|
Fix an error in SLIP escaping
|
2014-07-22 06:55:42 -06:00 |
|
Gregory Nutt
|
78d7925ce0
|
Kconfig: MW8904 driver no longer depends on EXPERIMENTAL (it probably still should)
|
2014-07-20 10:27:25 -06:00 |
|
Gregory Nutt
|
f4bcb730d2
|
WM8904 w/NxPlayer: Fix some compile errors and warnings with debug enabled
|
2014-07-20 09:17:36 -06:00 |
|
Gregory Nutt
|
4f6625380b
|
The WM8904 audio driver is mostly code complete and ready to begin initial testing
|
2014-07-19 18:52:58 -06:00 |
|
Gregory Nutt
|
6d9f9e37bf
|
SAMA5D4-EK: Add WM8904 initialization logic
|
2014-07-19 11:58:53 -06:00 |
|
Gregory Nutt
|
89ed7ab558
|
WM8904: Add initialization logic
|
2014-07-19 10:20:19 -06:00 |
|
Gregory Nutt
|
3b8c4a399d
|
Framework for a WM8904 audio driver. The initial driver check-in is simply Ken Pettit's VS1053 driver forced to compile with only WM8904 definitions
|
2014-07-18 15:35:12 -06:00 |
|
Gregory Nutt
|
1ff0536c7f
|
WM8904: Add header file support for this forcoming driver
|
2014-07-18 13:28:51 -06:00 |
|
Gregory Nutt
|
cc09d75180
|
MXT driver: Fix error in thread test... backward logic
|
2014-07-16 22:13:41 -06:00 |
|
Gregory Nutt
|
44e6516213
|
maXTouch: Add thresholding so that MOVE reports are not generated unless there is a significant change in the reported position
|
2014-07-12 14:00:33 -06:00 |
|
Gregory Nutt
|
4548ea731e
|
maXTouch: Fix error in state machine
|
2014-07-12 11:23:07 -06:00 |
|
Gregory Nutt
|
58ab6ec03f
|
NX graphics library: Macroize some color operators that become trivial when there is only one color plane
|
2014-07-12 07:44:56 -06:00 |
|
Gregory Nutt
|
3042fc5bc0
|
Missing closing quote in Kconfig file
|
2014-07-11 16:51:50 -06:00 |
|
Gregory Nutt
|
e91704c432
|
Minor Kconfig improvements
|
2014-07-11 16:25:35 -06:00 |
|
Gregory Nutt
|
ab1ab379dd
|
Addition rwbuffer interfaces should not be enabled unless they are needed; if rwbuffer support is enabled, it should not be unconditionally enabled in SMART and FTL
|
2014-07-11 16:19:17 -06:00 |
|
Gregory Nutt
|
8516551e54
|
Add an MTD layer that will add read-ahead or write buffering to any MTD driver (incomplete)
|
2014-07-11 11:20:11 -06:00 |
|
Gregory Nutt
|
f97113c5ef
|
SAMA5D4-EK: The maXTouch controller and test is now enabled by default in the NSH configuration
|
2014-07-10 08:42:25 -06:00 |
|
Gregory Nutt
|
3b0a797216
|
MXT driver works
|
2014-07-10 07:16:38 -06:00 |
|