Commit Graph

37 Commits

Author SHA1 Message Date
Gregory Nutt
f96a7cbc59 Update README 2017-08-25 16:27:55 -06:00
Gregory Nutt
9aac1dd44d configs: Remove all setenv.bat files. Remove all references to setenv.sh and setenv.bat from all config README files. 2017-04-26 10:12:13 -06:00
Gregory Nutt
1cdc746726 Rename CONFIG_DEBUG to CONFIG_DEBUG_FEATURES 2016-06-11 14:14:08 -06:00
Gregory Nutt
3a74a438d9 Rename CONFIG_DEBUG_VERBOSE to CONFIG_DEBUG_INFO 2016-06-11 11:50:18 -06:00
Gregory Nutt
9ec104834a Remove CONFIG_USARTn_ISUART 2016-05-25 11:21:48 -06:00
Gregory Nutt
3e0efd7279 Fix all URLs to the NuttX repository 2016-04-06 17:56:40 -06:00
Gregory Nutt
de50bc82a7 Remove CONFIG_SPI_OWNBUS: Now it is not just a good idea, it is the law 2016-01-23 18:21:36 -06:00
Gregory Nutt
e46cd30c14 Change use of mknulldeps.sh to mkwindeps.sh 2016-01-09 14:13:44 -06:00
Gregory Nutt
9e99cfa4e0 Correct many bitbucket.org URLs 2015-06-28 09:14:52 -06:00
Gregory Nutt
7214e52fb2 Fix references to the no-longer-existent misc/ directory in comments, README files, and documentation 2015-06-28 08:08:57 -06:00
Gregory Nutt
46bd0bc307 This cleans up most of the remaining SourceForge references 2015-06-26 18:13:20 -06:00
Gregory Nutt
0dbf579aa8 Fix numerous typos in configuration variable names. Tracked down by Alan Carvalho de Assis 2015-05-23 17:08:35 -06:00
Gregory Nutt
96aa06bad9 Spellcheck README file 2015-04-15 18:11:03 -06:00
Gregory Nutt
85c2c33c53 Add ILI9325 register definition header file 2014-05-12 11:24:57 -06:00
Gregory Nutt
51950d7850 Undefine IRQPRIO in all configurations it should not be set 2014-04-16 08:29:39 -06:00
Gregory Nutt
0cefef9cb5 Documentatin updated; fix errors in some comments 2014-03-28 09:52:07 -06:00
Gregory Nutt
2ba8224cdc SAM3/4: Rename CONFIG_GPIO*_IRQ to CONFIG_SAM34_GPIO*_IRQ in all board-related files 2014-03-23 15:48:10 -06:00
Gregory Nutt
4f657b0577 SAM3/4: Integrate the SPI DMA interface with the existing code. Does not yet work. 2014-03-13 15:54:09 -06:00
Gregory Nutt
58eed436e9 Removed almost all ostest configurations 2014-02-28 19:19:11 -06:00
Gregory Nutt
d45a8ce4bc SAM4E: Update SAM3/4 TC and DMAC register definition header files 2014-02-25 10:56:23 -06:00
Gregory Nutt
4868acf27e Add option to enable Aduino Due specific logic, like pull-up on UART0 RXD. Suggested by gdi@embedders.org 2013-10-09 07:35:00 -06:00
Gregory Nutt
efded598fd Finally... renamed all CONFIG_DRAM_ settings to CONFIG_RAM_ 2013-07-26 10:09:17 -06:00
Gregory Nutt
7c88100581 Fix type in the USB composite device driver 2013-07-04 07:47:32 -06:00
Gregory Nutt
b2a6338e69 Updates for the Sure PIC32 board 2013-07-03 11:39:54 -06:00
Gregory Nutt
242b459b05 Fix SAM34 interrupt handling for ports D-F; fix MISO logic in Arduino Due touchscreen driver 2013-07-03 08:12:45 -06:00
Gregory Nutt
c8a4f69a69 Several fixes to get a clean compile of the Arduino touch screen 2013-07-02 13:52:09 -06:00
Gregory Nutt
d6db74e581 Correct port direction for Arduino MISO signal 2013-07-02 12:37:20 -06:00
Gregory Nutt
d09fd9a9ca Flesh out a few missing pieces for the Arduino ITEAD TFT shield 2013-07-02 11:36:48 -06:00
Gregory Nutt
3c36e6e8b5 Add support for touchscreen on ITEAD Arduino shield. Untested 2013-07-02 08:25:53 -06:00
Gregory Nutt
5f066efd2d Add a general bit-bang SPI lower-half driver and implement the bit-bang driver for the Arduino ITEAD TFT shield 2013-07-01 16:50:16 -06:00
Gregory Nutt
a82077e0fc Add a general bit-bang SPI upper-half driver 2013-07-01 12:23:26 -06:00
Gregory Nutt
17810f3e6f Created new directories to hold SPI-related files 2013-07-01 08:11:54 -06:00
Gregory Nutt
6a3d1fece4 Add an NSH configuration for the Arduino Due; Pluse several fixes related to the Due and to the SAM3X in general 2013-06-28 14:32:08 -06:00
Gregory Nutt
fd683277c4 Arduino Due: Fixes to FLASH address, flash wait states, updated Comments. Now boots and runs a bit before crashing 2013-06-28 11:29:14 -06:00
Gregory Nutt
3e2fe6013c Add instructions to use BOSSA to load nuttx into Due 2013-06-28 08:54:09 -06:00
Gregory Nutt
7387a6feef Flesh out the Arduino Due board configuratino and integrate it with the build and configuration system 2013-06-27 14:24:27 -06:00
Gregory Nutt
288adb2f5a Add peripheral configuration logic for the SAM3X/3A; Change all references to SAM3/4 SPI to SPI0 for compatibity with the SAM3X/3A which has SPI0 and SPI1; Add directory which will eventually holdl an Arduino Due port 2013-06-26 18:46:44 -06:00