Gregory Nutt
820509eadc
Networking: Fix accept() so that it returns the correct IP address for the selected socket IP domain.
2015-01-17 09:27:05 -06:00
Gregory Nutt
4ad5998db3
net/socket and net/tcp: When we are ready to receive data or when we have outgoing data ready to be sent, we need to the notify the appropriate device driver of this condition. The notifying socket will be configured as either PF_INET or PF_INET6 and must look up the correct driver using the correct IP domain.
2015-01-17 08:33:14 -06:00
Gregory Nutt
2c251d845c
include/net/if.h: Add a bit to the device flags to indicate if the device packet buffer holds an IPv4 or an IPv6 domain packet. Set/clear the flag along with the correct offset to the application payload data as each packet is received.
...
net/socket, net/tcp, net/udp: Add logic to select the domain of the outputgoing packet before sending any UDP or TCP packet. This sets the bit to indicate the IPv4 or IPv6 domain and the correct offset to the output going payload data.
2015-01-17 07:42:09 -06:00
Gregory Nutt
88a0e82934
Networking: Remove field d_sndata from the device structure. It is the same as d_appdata and unnecessary
2015-01-17 05:59:13 -06:00
Gregory Nutt
5e938941a6
Networking: Replace all references to net_ipaddr_t with either in_addr_t on net_ipv6addr_t. The goal is to support both IPv4 and IPv6 simultaneously. This requires that the two types be distinct and not conditionally typedef'ed to net_ipaddr_t.
2015-01-16 12:30:18 -06:00
Gregory Nutt
bee89be4f4
Networking: Drivers can have both IPv4 and IPv6 addesses, but a socket can only only one or the other; The socket connnection structures need to include a union of IPv4 and IPv6 addresses for the local address binding and for the remote address connections
2015-01-16 10:01:54 -06:00
Gregory Nutt
b36dbe1d89
Add logic to netdev_findbyaddr() to return the correct network device for the case where a broadcast address is used. This change caused trivial ripples through other files because additional parameters are required for netdev_findbyaddr() when CONFIG_NET_MULTINIC
2014-11-23 11:00:22 -06:00
Gregory Nutt
6e04518e4a
If CONFIG_NET_ARP_SEND is enabled, then all ICMP, TCP, and UDP send operations will call arp_send() before attempting the real send operation. arp_send() will check if the the IP address mapping is in the ARP table and, if not send ARP requests periodically until it is. This eliminates losing the first outgoing message because there is not mapping in the ARP table.
2014-08-18 16:22:14 -06:00
Gregory Nutt
caba61999a
Remove CONFIG_DISABLE_CLOCK
2014-08-07 12:35:24 -06:00
Gregory Nutt
73f3ecf7e2
NET: Rename network interrupt event flags more appropriately: TCP_, UDP_, ICMP_, or PKT_ vs UIP_
2014-07-06 17:22:02 -06:00
Gregory Nutt
a6b39d1879
NET: in-progress change... don't use
2014-07-04 16:38:51 -06:00
Gregory Nutt
fa68fcc843
NET: Rename uip_callback_s to devif_callback_s
2014-06-29 12:59:34 -06:00
Gregory Nutt
8e706eb4ff
Rename many functions in net/devif from uip_* to devif_*
2014-06-28 18:36:09 -06:00
Gregory Nutt
5790c94ba3
Rename net/uip to net/devif. Rename uip/uip.h to devif/devif.h
2014-06-28 18:07:02 -06:00
Gregory Nutt
76fa58ee00
Move all socket-related files from net/ to net/socket. Move net/net.h to net/socket/socket.h
2014-06-28 17:25:18 -06:00
