sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
4,858 Commits 1 Branch 0 Tags 291 MiB
8437a63f11
Commit Graph

4846 Commits

Author SHA1 Message Date
Gregory Nutt
7d14b172ce SAMV7: A little more USB-related stuff 2015-03-21 08:54:01 -06:00
Gregory Nutt
948531c352 SAMV7: Add configuration logic and clock setup for USB device 2015-03-21 07:28:59 -06:00
Gregory Nutt
36c523bd9d SAMA5: Fix a typo in the Kconfig file 2015-03-21 06:22:04 -06:00
Gregory Nutt
e835af5840 SAMV7: Add USBHS register defintiion header file 2015-03-20 14:08:33 -06:00
Gregory Nutt
e68baa3073 Include chip/sam_spi.h in sam_spi.h 2015-03-20 11:09:36 -06:00
Gregory Nutt
5b3fe34ffb SAMA5D3: Fix typos in timer/counter header file. From Bob Doiron 2015-03-20 09:19:10 -06:00
Gregory Nutt
db52134d47 STM32 RTC lower-half: Fix some errors that cause compilation failures. From shilo.xyz 2015-03-19 12:56:47 -06:00
Gregory Nutt
e319870ac9 SAMV5 EMAC: A few more fixes. Neccessary but not sufficient 2015-03-19 08:54:50 -06:00
Gregory Nutt
6db55da159 SAMV7 Ethernet: Fix an order problem that left RX and TX disabled 2015-03-18 18:07:07 -06:00
Gregory Nutt
fb3fe58b58 SAMV7: Add a sneak internal interface that will allow us to set the MAC address before NSH even starts 2015-03-18 17:23:40 -06:00
Gregory Nutt
7e95bfe8d0 SAMV7: Updates to Ethernet driver based on comparison with Atmel sample code. Add configuration for other PHY GPIOs. Still no Ethernet interrupts 2015-03-18 15:55:00 -06:00
Gregory Nutt
000381db37 PIC32MZ: Changes that will permit building of the PIC32MZ Start Kit configuration using MPLAB and the XC32 toolchain. From David Sidrane 2015-03-17 14:50:11 -06:00
Gregory Nutt
824f486bdf SAMV7 Ethernet: Support getting IP address from the XULT AT24 EEPROM 2015-03-17 14:29:41 -06:00
Gregory Nutt
4ce927168f SAMV7 EMAC: Fix range of MCK dividers 2015-03-17 11:19:46 -06:00
Gregory Nutt
ae433eaa84 SAMV7: Use D-Cache clean/flush/invalidate by range in EMAC and XDMAC drivers 2015-03-17 09:28:27 -06:00
Gregory Nutt
108f722626 Break ARMv7E-M cache operations into separate files; Finish the unimplemented cache operations 2015-03-17 08:48:41 -06:00
Gregory Nutt
a590bdc737 SAMV7: Quick'n'dirty port of the SAMA5D4 Ethernet MAC driver to the SAMV7. Still some unresovled issues with DCache handling 2015-03-16 13:51:37 -06:00
Gregory Nutt
8a73d9b8ea SAMV7: Add Ethernet MAC register definition header file 2015-03-16 11:46:20 -06:00
Gregory Nutt
83a17af442 This commit enables HSMCI functionality in the SAMV71-XULT. TX DMA is, unfortunately, currently disabled. 2015-03-15 12:17:39 -06:00
Gregory Nutt
db2d9abcfa SAMA5: Fix a bug in SAMA5 HSMCI. The bitfield mask and shift values were reversed resulting in a trashed value for the number of blocks in the BLOCKR register. This was sufficient to prevent DMA writes from working. 2015-03-15 09:35:48 -06:00
Gregory Nutt
c638c67ad4 Add umount2(). umount() is now a macro that just calls umount2() with flags = 0. 2015-03-14 16:48:45 -06:00
Gregory Nutt
88d3eab435 SAMV7 XDMA: Fix a problem with invalidating the cache on RX DMA 2015-03-14 15:25:32 -06:00
Gregory Nutt
801d556452 EFM32: Add I2C driver. From Pierre-noel Bouteville 2015-03-14 14:47:53 -06:00
Gregory Nutt
b24ad6ae63 SAMV7: More SDRAM logic. It does still does not work 2015-03-14 13:27:00 -06:00
Gregory Nutt
fe09227cd5 SAMV71-XULT: Add support for SDRAM (unverified) 2015-03-14 11:00:46 -06:00
Gregory Nutt
2976594cfe Include correct chip file 2015-03-14 09:15:11 -06:00
Gregory Nutt
c32190c58d SAMV7: Add SDRAMC register definition header file 2015-03-14 09:13:51 -06:00
Gregory Nutt
6b1202d17f SAMV7 HSMCI: Change system bus interfaces seems to eliminate DMA failures. 2015-03-13 14:35:36 -06:00
Gregory Nutt
c2049956a4 Minor updates from initial debugging. 2015-03-13 13:46:27 -06:00
Gregory Nutt
0cae7563e8 SAMV7 HSMCI: Reading response registers at the wrong time can cause loss of response data. 2015-03-13 12:46:33 -06:00
Gregory Nutt
cbfe1c7699 SAMV7: Fix some cloning errors. SAMA5->SAM7 2015-03-13 10:38:10 -06:00
Gregory Nutt
a08378ce72 Fix a typo in a Cortex-M7 address 2015-03-13 10:37:21 -06:00
Gregory Nutt
265af48120 STM32 serial: Make input hardware flow-control work with RX DMA. From Jussi Kivilinna 2015-03-13 07:18:21 -06:00
Gregory Nutt
b8476c7ee8 STM32: Fix RX DMA setup for UART5. From Jussi Kivilinna. 2015-03-13 07:06:46 -06:00
Gregory Nutt
8f59fc8f64 SAMV7: Quick'n'dirty port of the SAMA5 HSMCI driver to the SAMV7 2015-03-12 18:03:41 -06:00
Gregory Nutt
0d79e315fd SAMV71: Quick'n'dirty port of the SAMA5 SSC driver to the SAM7. The IP is compatible but there are still some DMA- and Cache-related issues that need to be worked out. 2015-03-12 16:00:38 -06:00
Gregory Nutt
26cf5a35a9 SAMV71-XULT: Enable I2C and the I2C tool in the NSH configuration 2015-03-12 12:27:06 -06:00
Gregory Nutt
9b6c7661a4 SAMV7: Add TWI/I2C driver (untested) 2015-03-12 10:58:11 -06:00
Gregory Nutt
ca48fbfc4a SAMV7: Add SPI header files and driver 2015-03-12 09:12:37 -06:00
Gregory Nutt
f8c73c3499 stm32: usbdev: Fix stale initialization invalidating later NULL check. From Juha Niskanen 2015-03-12 08:08:50 -06:00
Gregory Nutt
47b225848d ARMv7-M MPU. Bad syntax will cause failure to write the correct value to the MPU_RASR register. From Juha Niskanen 2015-03-12 08:00:53 -06:00
Gregory Nutt
6511afa1c2 stm32_i2c: Add missing NULL check. From Juha Niskanen 2015-03-12 07:53:41 -06:00
Gregory Nutt
8d31651a1b Bringing PPPD yet closer to the NuttX coding style 2015-03-11 18:47:04 -06:00
Gregory Nutt
a4f1c636a3 SAMV7-XULT: Integrate button support and apps/examples/buttons into the NSH configuration 2015-03-11 14:41:58 -06:00
Gregory Nutt
a47d2eecce SAMV7: Correct low-level console output 2015-03-11 14:39:32 -06:00
Gregory Nutt
d8a99fb73f SAMV71-XULT: Enable 64-bit floating point support 2015-03-11 12:30:14 -06:00
Gregory Nutt
6dfc859e6f SAMV71-XULT: Switch to the ARM GNU tools for Embbeded tools that actually support Cortex-M7 2015-03-11 12:16:27 -06:00
Gregory Nutt
4285029fa1 SAMV7-XULT: Enable I- and D-caches, correct polaty of LEDs 2015-03-11 11:23:19 -06:00
Gregory Nutt
48efd2a6a8 PIC32MZ: Fixes from Kristopher Tate 2015-03-11 10:25:51 -06:00
Gregory Nutt
f72079cc63 Update COPYING file with special license requirements for PPPD 2015-03-11 09:14:15 -06:00
Gregory Nutt
b5980f024d SAMV71-XULT: Some bugfixes from early bring-up work 2015-03-10 16:11:28 -06:00
Gregory Nutt
3e5d0f8c7e Tiva TimerLib: Fix a typo in peripheral waiting logic: gptm, not gpio. From Bradley Noyes 2015-03-10 12:16:40 -06:00
Gregory Nutt
522462a1b1 SAMV7: Add logic to enable/disable TCMs 2015-03-10 11:32:05 -06:00
Gregory Nutt
9e10f868eb SAMV7: Update floating point and TCM configuration options. Update TODO list. Update comments. Refresh a configuration 2015-03-10 07:50:32 -06:00
Gregory Nutt
d6fce04562 Cosmetic changes to conditional compilation 2015-03-09 18:14:31 -06:00
Gregory Nutt
13cb5252bb Remove some traiilng whitespace 2015-03-09 15:42:35 -06:00
Gregory Nutt
1310ad28cf Cortex-M7: Add cache operations 2015-03-09 15:42:07 -06:00
Gregory Nutt
29dbba1693 Cortex-M7: Add cache operations 2015-03-09 15:41:48 -06:00
Gregory Nutt
aa22bec093 SAMV7: Leverage XDMAC driver from the SAMA5D4. 2015-03-09 10:11:12 -06:00
Gregory Nutt
ac52af5991 SAMV71-XULT: Add support for on-board LEDs. Includes partial support for on-board buttons. Some corrections fo to egg-stk37000 and sam4e-ek discovered during leveraging. Add board READEM.txt file 2015-03-09 08:23:09 -06:00
Gregory Nutt
f696530485 SAMV7: Add GPIO interrupt support 2015-03-08 19:32:05 -06:00
Gregory Nutt
dbb972b2f7 SAMV71: Add GPIO library support 2015-03-08 19:12:30 -06:00
Gregory Nutt
ed0fa0358c SAMV7: Add PIO register definition header file 2015-03-08 17:34:26 -06:00
Gregory Nutt
bbf80bbd5d SAMV71: Add pin mapping definitions 2015-03-08 13:24:32 -06:00
Gregory Nutt
ed1920ff76 SAMV71: Fix a few typos; Use factional value in BAUD calculation 2015-03-08 12:27:55 -06:00
Gregory Nutt
9d32caaa2c SAMV7: Add serial driver 2015-03-08 10:15:42 -06:00
Gregory Nutt
5b72858f0c SAMV71: Add UART register definition header file 2015-03-08 08:42:22 -06:00
Gregory Nutt
521de710b8 EFM32 updates from Pierre-noel Bouteville 2015-03-08 07:12:47 -06:00
Gregory Nutt
2571d6202d SAMV71-XULT: Add heap allocation logic 2015-03-07 11:46:54 -06:00
Gregory Nutt
b1cecdd3ea SAMV7: Add interrupt-related logic 2015-03-07 11:16:44 -06:00
Gregory Nutt
3c8d6e171f SAMV7: Add basic clock and timer ISR configuration logic 2015-03-07 10:32:47 -06:00
Gregory Nutt
5812dc263f SAMV71: Add EEFC register definition header file 2015-03-06 16:39:18 -06:00
Gregory Nutt
7f92f22167 SAMV71: Add Supply Controller register definition header file 2015-03-06 15:27:51 -06:00
Gregory Nutt
7113de4d18 SAMV71: Add PMC register definition header files 2015-03-06 14:58:13 -06:00
Gregory Nutt
6e6b9483ea SAMV71: More updates on the way to a clean build. Still more to do to complete that journey 2015-03-06 12:13:09 -06:00
Gregory Nutt
fdac423979 Cortex-M7/SAMV71-XULT: Various fixes for building Cortex-M7 with SAMV71. 2015-03-06 10:53:57 -06:00
Gregory Nutt
93a6b16718 Add a bare bones framework that will do nothing more than support configuration for the Atmel SAMV71 Xplained Ultra board. Very much a work in progress. 2015-03-06 08:56:44 -06:00
Gregory Nutt
9bcdf974a0 Add new common lazy FPU state saving option for ARMv7-M. Not yet verified 2015-03-06 08:26:43 -06:00
Gregory Nutt
3b798f6ef1 SAM3/4: Leverage some start-up logic from STM32 2015-03-05 17:45:13 -06:00
Gregory Nutt
89fd098a20 SAMV7: Add SAMV71 peripheral IDs and interrupt vector definitions 2015-03-05 16:34:22 -06:00
Gregory Nutt
10cfa3b7a5 Fix typo in file name 2015-03-05 15:48:48 -06:00
Gregory Nutt
f4ec5efe3a SAMV71: Add memory map header file 2015-03-05 15:47:29 -06:00
Gregory Nutt
67c21e6817 SAMV7 Kconfig: Add peripheral selections 2015-03-05 13:51:39 -06:00
Gregory Nutt
7704145bd3 Make ARM build system Cortex-M7 ready 2015-03-05 11:25:27 -06:00
Gregory Nutt
02e613b277 Add basic build directories and configuration logic for the SAMV7 family 2015-03-05 10:00:24 -06:00
Gregory Nutt
b6b50f5f42 Fix some BBRAM return values (from David Sidrane). Also some MTD-related cosmetic changes 2015-03-05 08:08:11 -06:00
Gregory Nutt
5158e10bc2 Fix two uses of DEBUG_COLORATION vs STACK_COLORATION (from David Sidrane). Also some corrected comments 2015-03-05 06:41:14 -06:00
Gregory Nutt
a5043d5e60 Add support for dumping board-specific information on assertion. From David Sidrane 2015-03-04 07:00:29 -06:00
Gregory Nutt
466b69fe00 Add missing SPI callback functions to the STM32 SPI driver. From Freddie Chopin 2015-03-04 06:52:46 -06:00
Gregory Nutt
a278893c69 Fix issues when AES support was added for the STM32L1. From Juha Niskanen 2015-03-04 06:38:03 -06:00
Gregory Nutt
32067448d7 Add support for new STM32L1 chip variant. From Juha Niskanen 2015-03-04 06:33:44 -06:00
Gregory Nutt
5eba2afbd6 STM32 BBSRAM driver updated by David Sidrane 2015-03-03 16:05:24 -06:00
Gregory Nutt
b17303e8ab PIC32MZ: Add DMA register definition header file 2015-03-03 15:57:47 -06:00
Gregory Nutt
e290a10fa6 PIC32MZ: Add I2C register definition file 2015-03-03 14:40:09 -06:00
Gregory Nutt
ef23616f8f PIC32MX: Copy some of the configuration updates from PIC32MZ 2015-03-03 13:16:58 -06:00
Gregory Nutt
4183594466 PIC32MZ SPI: Implement exchange() method; update SPI_REGDEBUG configuration and clean up implementation 2015-03-03 12:23:27 -06:00
Gregory Nutt
a3464c54bd PIC32MX SPI: Fix typos in Kconfig; Move constant SPI config data to ROM-able const structure 2015-03-03 10:06:49 -06:00
Gregory Nutt
da2319a27f PIC32MZ: Default SPI configuration setting is backward; refresh configuration 2015-03-03 09:16:10 -06:00
Gregory Nutt
1269fe8b58 PIC32MZ: Add a basic SPI driver 2015-03-03 08:58:27 -06:00
Gregory Nutt
33ac85adcb Adds architecture support for the STM32F372 and F373 (no board support yet). Only tested on STM32F373CC, but should work on the rest. Contributed by Marten Svanfeldt. 2015-03-02 10:33:42 -06:00
Gregory Nutt
9cb90824a1 PIC32MZ Starter Kit: Add support for on-board buttons 2015-03-02 10:01:10 -06:00
Gregory Nutt
625cd7b43a PIC32MZ: Implement support for IO port interrupts 2015-03-02 09:24:43 -06:00
Gregory Nutt
7ae730c810 PIC32MZ: Add ability to select flash ECC options 2015-03-01 09:08:44 -06:00
Gregory Nutt
b9f1e7e301 PIC32MZ: Fix yet another error in DEVCFG settings 2015-02-28 14:35:40 -06:00
Gregory Nutt
9377ec2f80 PIC32MZ: More fixups to DEVCFG settings. Still can't debug 2015-02-28 14:18:22 -06:00
Gregory Nutt
18b7234ad7 PIC32MZ: Ooops DMTCNT maximum value still bad 2015-02-28 13:48:16 -06:00
Gregory Nutt
0c7a1382b2 PIC32MZ: Fix reserved RAM for MPLABX; Revert FPLLRNG calculation; Fix maximum DMTCNT value 2015-02-28 12:49:03 -06:00
Gregory Nutt
f0a00f685a PIC32MZ: Fix some configuration settings and POSC mode should be external clock 2015-02-28 11:54:47 -06:00
Gregory Nutt
ee84648f96 PIC32MZ: Add an option to use the MIPS32 or the microMIPS ISA 2015-02-28 08:22:37 -06:00
Gregory Nutt
c29995fd85 Rename all use of up_boardinitialize(). Should not use common microprocessing naming convention but rather the microprocessor-specific naming conventioni 2015-02-28 07:14:37 -06:00
Gregory Nutt
429863f348 arch/: board function prototypes are now in include/nuttx/board.h. Remove from architecture header file; Add inclusion of nuttx/board.h to all files referencing board functions 2015-02-27 17:19:38 -06:00
Gregory Nutt
c0d2e33288 PIC32MZ: Correct a few more DEVCFG issues 2015-02-27 16:20:28 -06:00
Gregory Nutt
a7c1053f9d PIC32MZ: Review DEVCFG setting; adjust a few to match example code 2015-02-27 10:54:18 -06:00
Gregory Nutt
7378a97c74 PIC32MZ: Fix some repeated typos and work around an issue with passing defined parameters to a macro that takes multiple parameters 2015-02-26 15:39:57 -06:00
Gregory Nutt
a688cdc2ee PIC32MZ: Add logic to configure peripheral pins for the selecte UARTs 2015-02-26 15:05:11 -06:00
Gregory Nutt
db9b6b5f1a PIC32MZ: Add peripheral pin selection register definitions 2015-02-26 13:19:40 -06:00
Gregory Nutt
6961f84e62 Costmetic updates comments and style; Add NFS dependency on IPv4 2015-02-26 06:04:23 -06:00
Gregory Nutt
8fa7c8d4fa Tiva ADC: Drive updates from Calvin Maguranis 2015-02-25 13:38:22 -06:00
Gregory Nutt
a4d514c79b PIC32MX/Z: Partial review of PIC32MZ cp0 register -- need to do more; Also found issues with definitions for PIC32MX -- need to be retested 2015-02-25 13:33:09 -06:00
Gregory Nutt
2c929aa55f PIC32MZ: Add file for GPIO interrupt support. There are issues so configuration is EXPERIMENTAL for now 2015-02-25 11:09:04 -06:00
Gregory Nutt
8f8ed30d52 PIC32MZ: Add IOPort header file and GPIO configuration logic 2015-02-25 10:43:12 -06:00
Gregory Nutt
1b4bc931cd Adjust microMIPS compile options to enable interlinking with 32-bit code 2015-02-25 09:54:48 -06:00
Gregory Nutt
59412f25ce SAM4CM free-running time: Change overflow type from uint16 to uint32. From Max Neklyudov. 2015-02-25 08:12:31 -06:00
Gregory Nutt
70c8ff6581 Eliminate some warnings 2015-02-25 08:05:35 -06:00
Gregory Nutt
b99ff9e03b Refresh configuration 2015-02-25 07:22:58 -06:00
Gregory Nutt
0d6ba023a1 PIC32MZ: Add serial driver 2015-02-24 19:44:25 -06:00
Gregory Nutt
c3d282df7b PIC32MZ: Add low level UART support 2015-02-24 17:23:56 -06:00
Gregory Nutt
87faa1008f PIC32MZ: Add UART register definition header file 2015-02-24 17:00:14 -06:00
Gregory Nutt
65d762f902 PIC32MZ: Add error exception handling and interrupt decode logic 2015-02-24 16:11:30 -06:00
Gregory Nutt
6798e67177 PIC32MZ: Add support for a timer interrupt 2015-02-24 15:36:08 -06:00
Gregory Nutt
d0940671cf PIC32MZ: Add interrupt controller support 2015-02-24 14:50:54 -06:00
Gregory Nutt
acef552fac PIC32MZ: Add interrupt controller register definitions 2015-02-24 13:16:04 -06:00
Gregory Nutt
6cf496ee67 PIC32MX: Standardize of naming in comments 2015-02-24 11:32:15 -06:00
Gregory Nutt
f5a0fb060d PIC32MZ: Add Oscillator header file; Add logic to set up peripheral clocks on reset 2015-02-24 11:16:32 -06:00
Gregory Nutt
354e5a9a11 PIC32MZ: Add beginnings of CPU initialization logic. Still some bad logic for setting up peripheral clocking 2015-02-24 09:30:30 -06:00
Gregory Nutt
d4ce089451 Merge commit '45e0cf1f4a7664974933db2a408ccea6acad4eff' 2015-02-24 07:13:48 -06:00
sauttefk
a6695b442e Fix SSI TX and RX legacy mapping of TM4C1294NC 2015-02-24 03:31:12 +01:00
Gregory Nutt
15579510e8 PIC32MZ: Fix some PLL setup logic 2015-02-23 17:27:28 -06:00
Gregory Nutt
db10058d27 PIC32MZ: Fix an error in the branch target of the hard-coded power up reset branch 2015-02-23 17:09:57 -06:00
Gregory Nutt
9e92b9041b PIC32MZ: Most related to start up file a FLASH device configuration setup 2015-02-23 16:36:35 -06:00
Gregory Nutt
cfd139e8af PIC32MZ: Make sure that the microMIPS ISA is selected on all common MIPS32 assembly files when the PIC21MZ is selected 2015-02-23 12:09:34 -06:00
Gregory Nutt
9a4f360265 PIC32MZ: Resolve a PIC32 dependency in the generic MIPS32 code 2015-02-23 11:56:16 -06:00
Gregory Nutt
b7a8a1f8aa Finishes PIC32MZ device configuration definitions 2015-02-23 09:58:34 -06:00
Gregory Nutt
d75acb630d PIC32MZ: Add memorymap and devcfg header files 2015-02-22 16:21:12 -06:00
Gregory Nutt
5559b72abd PIC32MZ: Framework for startup function. Still has too much PIC32MX garbage in it to be credible 2015-02-22 14:30:53 -06:00
Gregory Nutt
9c9fc13b6c MIPS: Add some build support for the M14K and also for the PIC32MZ Starter Kit. Still a long way to go 2015-02-22 13:45:59 -06:00
Gregory Nutt
a81ebff6e0 Remove support for obsolete PIC32 toolchain configuration names 2015-02-22 12:14:20 -06:00
Gregory Nutt
024a5cb278 PIC32MZ: Add just enough PIC32MZ logic that we can run 'make menuconfig' 2015-02-22 10:53:24 -06:00
Gregory Nutt
f273bcfa82 Fix a typo that prevents building PIC32... How long has that been there? 2015-02-21 19:41:59 -06:00
Gregory Nutt
c5b3e3e7aa Current Pinguino toolchain uses prefix p32 instead of mips 2015-02-21 19:41:26 -06:00
Gregory Nutt
0dc70108b8 STM32: Fix for compilation introduced by last backup RAM change. Not sure it it is correct, be now things do compile 2015-02-21 17:51:03 -06:00
Gregory Nutt
63711ad338 Adds the ability to use the STM32F2 and STM32F4 Battery Backedup SRAM in the file system. With an option to Save Panic context to one of the files. From David Sidrane. 2015-02-21 15:15:51 -06:00
Gregory Nutt
7d43cf2087 Changes to support fully write protecting the backup domain. N.B. stm32_pwr_enablebkp did not account for the delay from enable to the domain being writable. The KISS solution is a up_udelay. A more complex solution would be a negated write test with restore. From David Sidrane. 2015-02-21 14:53:33 -06:00
Gregory Nutt
2d91128111 Tiva GPIO clean-up by Calvin Maguranis 2015-02-20 13:40:25 -06:00
Gregory Nutt
a0a553f3e9 Tiva: Move GPIIO prototypes out of arch/arm/include/tiva/irq.h to arch/arm/tiva/tiva_gpio.h where they belong 2015-02-20 13:31:43 -06:00
Gregory Nutt
ac0cd3655a Fix some time value changes; mostly changing greater than 1000000000 to greater than or equal to 1000000000. From Juha Niskanen 2015-02-20 07:07:36 -06:00
Gregory Nutt
2532e33de2 VFS: The inode unlink method should not be support if operations on the root pseudo-filesystem are disabled. 2015-02-18 09:34:58 -06:00
Gregory Nutt
d3196ca5c3 The RTC ioctl() method is now a configuration option 2015-02-18 08:23:10 -06:00
Gregory Nutt
57eb72a13f Add an IOCTL method to the RTC interface 2015-02-18 08:05:31 -06:00
Gregory Nutt
80cb25a0ff Tiva ADC: Should not have its own ADC debug. Should use the common Analog debug 2015-02-17 14:54:56 -06:00
Gregory Nutt
7354e41aa6 Tiva: Updated files to allow for ADC triggering by the timer. I’ve cleaned up some parts of the ADC code, too, and fleshed out the PWM triggering ioctl. From Calvin Maguranis 2015-02-17 13:50:30 -06:00
Gregory Nutt
d578829ddd Tiva SPI: Cosmetic improvements 2015-02-17 12:45:47 -06:00
Gregory Nutt
56b29b00ea EFM32 USB Device: Is not basically functional with this change. From Pierre-noel Bouteville. 2015-02-16 15:45:49 -06:00
Gregory Nutt
ff6b34967b Fix a compilation error. From Macs Neklyudov 2015-02-16 14:30:15 -06:00
Gregory Nutt
0081b0840b Missed a Kconfig definition in the last commit 2015-02-16 10:41:12 -06:00
Gregory Nutt
c747521953 STM32 RTC: Extend the RTC interface to support reading subseconds. From Jussi Kivilinna 2015-02-16 07:18:09 -06:00
Gregory Nutt
f7bb64b327 Suffer the consequences of moving struct timeval to its correct location 2015-02-15 15:18:35 -06:00
Gregory Nutt
529bc9626c Add support for RTC driver to the STM32F4-Discovery board 2015-02-15 10:11:01 -06:00
Gregory Nutt
68d39b69aa Remove an unused variable 2015-02-15 08:51:39 -06:00
Gregory Nutt
726b0d5f58 RTC: A little more clean-up of the RTC driver 2015-02-15 08:19:23 -06:00
Gregory Nutt
53322a50f4 STM32 RTC: Implement the rdtime() method of the RTC lower half interface 2015-02-13 13:56:22 -06:00
Gregory Nutt
702f155fd0 STM32 RTC driver lower half: Implement the settime method of the RTC interface 2015-02-13 13:36:15 -06:00
Gregory Nutt
b0b6747d49 Break out a new internal interface, stm32_rtc_setdatetime(). This eliminates some un-necessary time conversions. From Freddie Chopin. 
Add a skeleton implementation of the RTC lower half interface at arch/arm/src/stm32/stm32_rtc_lowerhalf.c.  This is just the framework for the RTC lower half.  None of the interface methods have yet been implemetned.
 2015-02-13 12:56:58 -06:00
Gregory Nutt
c662563b83 Forgot to add a file in the last commit 2015-02-13 10:05:10 -06:00
Gregory Nutt
501bc15fbd RTC: Remove all backdoor interfaces from rtc.h 2015-02-13 08:41:34 -06:00
Gregory Nutt
d1fa95ffc3 Merge commit 'd000b0ac237cb6b17e3d355b55250c3ca7e9f2d6' 2015-02-11 18:07:03 -06:00
sauttefk
7384d3bd79 Add TI EK-TM4C1294XL launchpad support 2015-02-12 00:30:38 +01:00
Gregory Nutt
24e51794f9 Kinetis: Add architectural support for the K26Z128VLH4. From Derek B. Noonburg 2015-02-11 07:15:45 -06:00
Gregory Nutt
28c2d93212 LP17 Ethernet Driver: Fix some compile problems when IPv6 is enabled 2015-02-10 15:23:11 -06:00
Gregory Nutt
5566a458d1 LPC17xx: Add IPv6 support to the LPC17 Ethernet driver. Untested... I no longer have a proper environment for LPC17 debug. 2015-02-10 14:04:08 -06:00
Gregory Nutt
9e6cd16a8b SAM4 Ethernet Driver: No supports operation using the high priority work queue so that packet processing can occur outside of interrupt level processing. 
SAM4E-EK: The nsh configuration now configures the Ethernet driver for execution on the HP work thread.
 2015-02-10 11:10:55 -06:00
Gregory Nutt
8b0d9fb456 Fix some warning 2015-02-09 18:24:31 -06:00
Gregory Nutt
0a6ae631dc Clone the SAMA5D4 IPv6 support to the SAM4E EMAC and SAMAd3 EMAC and GMAC drivers. 2015-02-09 17:16:55 -06:00
Gregory Nutt
f0d318c124 Big, very risky change: Remove all occurrences of up_maskack_irq() that disable and enable interrupts with up_ack_irq() that only acknowledges the interrupts. This is only used in interrupt decoding logic. Also remove the logic that unconditionally re-enables interrupts with the interrupt exits. This interferes with the drivers ability to control the interrupt state. This is a necessary, sweeping, global change and unfortunately impossible to test. 2015-02-09 16:12:11 -06:00
Gregory Nutt
08677542dc SAMA5D Ethernet: Add support for CONFIG_NET_NOTINTS so that the driver can operate from the work queue thread instead of doing everything from the interrupt level. 2015-02-09 15:26:05 -06:00
Gregory Nutt
25f187d754 ARMv7-A interrupt handler: Should not automatically re-enable interrupts on interrupt return. That interferes with the driver's ability to manage interrupts. 2015-02-09 15:24:31 -06:00
Gregory Nutt
fa580e17cf Oops... Conditioned on IPv4 wheren IPv6 was intended 2015-02-09 14:16:32 -06:00
Gregory Nutt
987715e8a3 Fix IPv4-dependend debug output 2015-02-09 13:18:31 -06:00
Gregory Nutt
09b356c497 SAMA5D4 EMAC: Add support for Multicast address matching and IPv6 2015-02-09 10:50:38 -06:00
Gregory Nutt
67f0563fad Add logic so that STM32 Ethernet drivier can avoid interrupt level processing and, instead, execute on the work thread. 2015-02-09 08:33:29 -06:00
Gregory Nutt
8bac6b71ce SYSLOG: Add an option to use the syslog'ing device as the system consolution. This option enables a low-level, write-only console device at /dev/console (similar to the low-level UART console device). From Pierre-noel Bouteville. 2015-02-08 06:53:24 -06:00
Gregory Nutt
b2ed249b42 STM32 SPI: Clean-up asymmetric configuration of SPI6 2015-02-07 18:59:06 -06:00
Gregory Nutt
706f01b8a2 STM32 SPI: The source clock for SPI 4,5, and 6 should be PCLK2, not PCLK1 (for F411, F427, and F429). Per David Sidrane. 2015-02-07 13:59:45 -06:00
Gregory Nutt
9318121175 Updated Tiva ADC files 2015-02-06 16:56:12 -06:00
Gregory Nutt
3ca8d3766a Tiva ADC: Add Kconfig options for ADC. From Calvin Maguranis 2015-02-05 19:05:13 -06:00
Gregory Nutt
225489a99a Tiva ADC: Partial build support. Still missing Kconfg changes 2015-02-05 18:01:18 -06:00
Gregory Nutt
376f39c822 Tiva ADC: Adds a Tiva ADC driver. From Calvin Maguranis 2015-02-05 17:36:23 -06:00
Gregory Nutt
a6bda5f8ba Tiva ADC: Register definitiona header file from Calvin Maguranis 2015-02-05 16:29:17 -06:00
Gregory Nutt
46a153aa3e Adds support for TM4C123G timers; integrates with the TM4C123G Launchpad. From Calvin Maguranis 2015-02-05 13:51:32 -06:00
Gregory Nutt
ee8d792737 Networking: Changes need to build ICMPv6 'router' configuration on STM32 with network debug enabled 2015-02-05 11:47:56 -06:00
Gregory Nutt
821ffc0b8a STM32: Add an IPv6 configuration for the STM32F4-Discovery board (witht he STM32-DISCO_BB base board). Verify that the STM32 Ethernet driver works with IPv6. 2015-02-05 11:21:04 -06:00
Gregory Nutt
de75731989 Add IPv6 support to network driver skeleton and to SAMA5D4 Ethernet driver (which, unfortunately is still missing address filtering logi) 2015-02-05 10:49:32 -06:00
Gregory Nutt
506c6c8512 ICMPv6: Add logic to behave like a router (if so configured): NuttX will not send the router advertisement message in response to any router solicitation messages. 2015-02-05 09:43:29 -06:00
Gregory Nutt
1646e643d7 Networking: Break out Ethernet definitions into a separate file; add IPv6 multicast addresses as common globals, Ethernet drivers need to filter link-local, all nodes Ethernet address 2015-02-04 14:51:20 -06:00
Gregory Nutt
f036df9faa Minor update to Kconfig file selections 2015-02-04 08:21:32 -06:00
Gregory Nutt
011c6e0c7e Re-arrange condition logic from the last change to avoid having STM32-specific conditional logic outside of the STM32 sandbox. 2015-02-04 07:24:19 -06:00
Gregory Nutt
2393a074e5 STM32: Add driver for STM32L162XX AES peripheral. Signed-off-by: Juha Niskanen <juha.niskanen@haltian.com> 2015-02-04 06:49:05 -06:00
Gregory Nutt
d617384d27 EFM: Remove a misbehaving assertion. From Pierre-noel Bouteville 
Also remove spaces before and after paretheses to conform to coding standard.
 2015-02-03 13:34:37 -06:00
Gregory Nutt
d08e29e0a0 Remove and extra endif from the Kconfig 2015-02-03 12:46:40 -06:00
Gregory Nutt
5189cddef2 Convert the 64-bit usec limit to a 32-bit tick limit 2015-02-03 07:18:17 -06:00
Gregory Nutt
f017f4c8a8 SAM4CM: Add support for tickless operation 2015-02-03 07:00:54 -06:00
Gregory Nutt
c51ebf8c72 Refresh some configurations 2015-02-01 12:15:46 -06:00
Gregory Nutt
ec6383d2d2 Fix compile issues with configs/sim/nettest 2015-02-01 12:00:30 -06:00
Gregory Nutt
5f72080e0a SIM: fix a case in the simulated Ethernet driver where it was using a old structure name 2015-02-01 09:00:42 -06:00
Gregory Nutt
b15632e8ba drivers/ramdisk.c and include/nuttx/fs/ramdisk.h: Add logic to dispose of the drvier and RAM buffer when the RAM disk has been unlinked and all open references to the RAM disk have been closed. Add new parameters to romdisk() to specify what should be done with the RAM/ROM buffer -- Should it be freed or not? Changed all calls to ramdisk() to use these new parameters. 2015-02-01 07:24:16 -06:00
Gregory Nutt
d8561fbcae Remove execute privileges from some header files 2015-02-01 06:24:18 -06:00
Gregory Nutt
515856c3d9 EFM32 Add support of BURTC and add possibility of debug message of RMU: Pierre-noel Bouteville 2015-02-01 06:19:53 -06:00
Gregory Nutt
d9d530850a Review/modifications for change of last merge 2015-01-31 14:10:53 -06:00
Gregory Nutt
e4b0df0431 Merge commit '1207647ee19ac48746300f2d3fa8f4679c32de95' 2015-01-31 13:47:10 -06:00
Gregory Nutt
0817d47964 Fix a missing quotation mark in configuration description 2015-01-30 12:28:04 -06:00
Gregory Nutt
6b900ec05c EFM32: Logic to unconditionally enable LE clocking. Even you don't use core clock LE as source for LFA or LFB, to read are write any register not clocked by HFPERCLK or HFCORECLK, HFCORECLKLE should be enabled. From Pierre-noel Bouteville. 2015-01-30 07:44:49 -06:00
Gregory Nutt
56200909a0 ARM assembly language memcpy.S was not returning a value in R0 it is required to do. From David Sidrane 2015-01-29 06:36:53 -06:00
Gregory Nutt
a2efa2fed8 Unix domain: More fixes. With these changes, apps/examples/ustream works 2015-01-28 08:39:48 -06:00
Gregory Nutt
5a0ac60538 Merge remote-tracking branch 'origin/master' into afunix 2015-01-27 16:44:42 -06:00
Gregory Nutt
944b34e31f Unix domain: A few fixes from early integration 2015-01-27 16:39:30 -06:00
Gregory Nutt
ce80d90e6d Tiva Ethernet: Move place where interrupts are disabled. It is probably not possible, but the logic looks like it could leave interrupts disabled 2015-01-27 14:59:31 -06:00
Gregory Nutt
af612f6fad Unix domain: More fixed to build without Ethernet or Slip 2015-01-27 14:26:10 -06:00
Gregory Nutt
9b5fe1e446 Various fixes to get Unix domain sockets to build on the simulator without Ethernet 2015-01-27 14:11:46 -06:00
Gregory Nutt
523b12c624 Recent changes to stm32_rtcc.c do not compile with STM32L15XX configurations. From Jussi Kivilinna. 2015-01-27 09:20:42 -06:00
Gregory Nutt
2ce16c8fda Disabling any of EXTI 5-9 interrupts was disabling interrupts for all EXTI 5-9. Same issue with EXTI 10-15. From Jussi Kivilinna. 2015-01-27 09:15:43 -06:00
jeditekunum
9da75dc4f7 Interrupt vectors for ATMEGA1284P. 2015-01-26 14:10:46 -06:00
jeditekunum
96d06d7a70 Fix typos. 2015-01-26 13:55:26 -06:00
Gregory Nutt
d78464404a Get USART 2 & 3 working on lpc4357-evb. These changes are required to get USART 2 and 3 working on the Embest development board. From Toby Duckworth 2015-01-26 07:33:22 -06:00
jeditekunum
6d361911f1 First step at porting to MoteinoMEGA. LED shows assert failure at boot. Appears to be short double blink, short off (~1sec), followed by 250ms toggle cycles. Most of it derived from amber board. 2015-01-24 14:31:35 -06:00
Gregory Nutt
30b141e2c8 Remove CONFIG_DEBUG_STACK. Adding CONFIG_STACK_COLORATION makes this configuration option pointless 2015-01-24 06:49:51 -06:00
Gregory Nutt
e8f266001d Add CONFIG_STACK_COLORATION that does the same thing as CONFIG_DEBUG_STACK but without enabling debug. From David Sidrane 2015-01-24 06:03:39 -06:00
Gregory Nutt
16f72b3470 Add support for the EFM32 reset management unit (RMU). From Pierre-noel Bouteville 2015-01-23 15:25:10 -06:00
Gregory Nutt
639fe6c297 Armv7-M: Remove Px4-only setting of stack to 0xff. This is incompatible with standard NuttX stack montitoring logic 2015-01-22 10:09:10 -06:00
Gregory Nutt
b3db229b77 STM32 Ethernet: Port IPv6 address filtering from the Tiva TM4C driver 2015-01-21 15:04:39 -06:00
Gregory Nutt
9588b0e7a7 All Ethernet drivers (again): Missed one place where arp_out() is called and neighber_out() needs to be called 2015-01-21 11:36:33 -06:00
Gregory Nutt
8a48b3890f SourceForge Ticket #38. Stray character in arch/avr/src/at90usb/at90usb_serial.c 2015-01-20 16:38:18 -06:00
Gregory Nutt
723b7fc430 Networking: Modify all Ethernet drivers: Do neighbor look-up on all outgoing IPv6 packs in order to properly set the destination link layer address. 2015-01-20 15:52:25 -06:00
Gregory Nutt
f6063c3896 Networking: Add missing raw/packet socket support to all Ethernet drivers 2015-01-20 15:14:29 -06:00
Gregory Nutt
07132f462f Ethernet drivers: Use IFF_IS_IPv4 macro. Cannot rely on the EtherType being set correctly. 2015-01-20 06:26:14 -06:00
Gregory Nutt
19a71b395c TM4C Ethernet: Fix the ICMPv6 multicast address 2015-01-19 14:56:43 -06:00
Gregory Nutt
674a86027a Tiva Ethernet: Add support for receiving IPv6 multicast frames 2015-01-19 12:43:13 -06:00
Gregory Nutt
3aafa0b93d nuttx/arch/arm/src/stm32/stm32_serial.c: fix declaration and definition of up_receive() and up_dma_receive() to match fields of uart_ops_s from nuttx/include/nuttx/serial/serial.h 2015-01-19 06:42:27 -06:00
Gregory Nutt
0d8ef0993f Tiva Ethernet: When calling into the stack from the worker thread, it is necessary to have the stack locked 2015-01-18 16:58:11 -06:00
Gregory Nutt
f14538bf52 Tiva Ethernet: Don't try to print IPv4 address if IPv4 is not enabled 2015-01-18 11:38:40 -06:00
Gregory Nutt
41b1f5d9cf Tiva Ethernet: Back out previous change... it is WRONG 2015-01-17 11:55:20 -06:00