Gregory Nutt
|
857d0b8e76
|
Remove non-standard, conditional syslog_enable(), instead only the required, standard setlogmask()
|
2014-10-09 06:09:03 -06:00 |
|
Gregory Nutt
|
4aa785a503
|
Rename CONFIG_EXAMPLES_NXCONSOLE to CONFIG_EXAMPLES_NXTERM; rename CONFIG_NXWM_NXCONSOLE to CONFIG_NXWM_NXTERM
|
2014-09-20 14:25:51 -06:00 |
|
Gregory Nutt
|
e09923cd8e
|
Every defconfig file should now have a valid setting for CONFIG_WDOG_INTRESERVE
|
2014-09-03 06:55:06 -06:00 |
|
Gregory Nutt
|
3dd8c08714
|
Remove final traces of the 8015 from the NuttX source tree
|
2014-09-01 13:21:15 -06:00 |
|
Gregory Nutt
|
f15246ec6c
|
Remove CONFIG_MM_MULTIHEAP. Non-multiheap operation is no longer supported
|
2014-08-31 10:54:55 -06:00 |
|
Gregory Nutt
|
1b2a96c965
|
Change CONFIG_ADDRENV to CONFIG_ARCH_ADDRENV; change how it is selected -- the architecure must first declare support
|
2014-08-24 06:42:11 -06:00 |
|
Gregory Nutt
|
49deb059d4
|
Change CONFIG_MSEC_PER_TICK to CONFIG_USEC_PER_TICK. This gives more options for system timers in general, but more importantly, let's us realize higher resolution for the case of CONFIG_SCHED_TICKLESS=y -- of course, at the risk of some new interger overvflow problems
|
2014-08-07 13:42:47 -06:00 |
|
Gregory Nutt
|
7edc6a5666
|
Remove CONFIG_DISABLE_CLOCK
|
2014-08-07 12:35:24 -06:00 |
|
Gregory Nutt
|
cbe4d3573d
|
Rename apps/examples/uip to apps/examples/webserver
|
2014-07-03 17:31:17 -06:00 |
|
Gregory Nutt
|
285f66a2c1
|
NET: Rename uiplib/UIPLIB to netlib/NETLIB
|
2014-07-02 16:04:25 -06:00 |
|
Gregory Nutt
|
2dbaed4779
|
The alternate console device CONFIG_NSH_CONDEV must not be defined unconditionally. This causes errors when using Telnet sessions. This was solved by adding CONFIG_NSH_ALTCONDEV: CONFIG_NSH_ALTCONDEV enables or disables the feature then, if enabled, CONFIG_NSH_CONDEV provides the alternative console device name
|
2014-05-05 08:52:02 -06:00 |
|
Gregory Nutt
|
ca25657f7e
|
Refresh several defconfig files to (1) bring them up-to-date, and (2) to confirm that no bugs were introduced in recent massive Kconfig file changes
|
2014-03-06 16:02:18 -06:00 |
|
Gregory Nutt
|
7050b91155
|
Removed the CONFIG_NUTTX_NEWCONFIG setting from every defconfig file
|
2014-03-06 12:23:26 -06:00 |
|
Gregory Nutt
|
378e4f9dd6
|
Set CONFIG_DEFAULT_SMALL=y in the defconfig for all smaller MCUs so that if they are reconfigured, they will pick up the most conservative options for all new settings
|
2014-02-28 14:32:44 -06:00 |
|
Gregory Nutt
|
5da9337810
|
SAMD20: Fix BAUD calculation. Now comes up okay about 20% of the time
|
2014-02-17 18:09:17 -06:00 |
|
Gregory Nutt
|
970af98429
|
SAMD20: Misc changes for a clean build with debug enabled
|
2014-02-17 08:14:19 -06:00 |
|
Gregory Nutt
|
387dc15a06
|
SAMD20: Move serial console back to SERCOM4
|
2014-02-16 13:34:04 -06:00 |
|
Gregory Nutt
|
69fd301151
|
SAMD20: Beginning of SERCOM UART configuration logic
|
2014-02-15 14:22:56 -06:00 |
|
Gregory Nutt
|
bcac812308
|
SAMD20: Fixes to SRAM size, No. memory regions, and beginning of clocking logic
|
2014-02-13 19:09:58 -06:00 |
|
Gregory Nutt
|
f0c1cedab7
|
Minimal changes to get a clean compilation of the SAMD20 Xplained configuration. Still a lot of missing logic
|
2014-02-13 09:14:03 -06:00 |
|
Gregory Nutt
|
9b5d5aef78
|
Add initial support for the Atmel SAMD20 Xplained Pro board
|
2014-02-12 17:50:58 -06:00 |
|
Gregory Nutt
|
23ac55e302
|
Add configuration for the SAMD20 Xplained Pro board. Initial check a low-effor, unverified clone of thoe SAM4L Xplained Pro board configuration
|
2014-02-12 17:21:28 -06:00 |
|