This adds a simple USB device driver for the mpfs. However,
this driver is still at its early phase. Only limited testing
with CDC/ACM has been conducted.
Signed-off-by: Eero Nurkkala <eero.nurkkala@offcode.fi>
The imxrt1064, imxrt1064, and teensy-4.x board configs would fail to
build when CONFIG_USERLED_LOWER was enabled, due to a missing header in
imxrt_appinit.c and an unset local define.
Verified a build succeds for the specified boards with the following
defconfig modifications:
# CONFIG_ARCH_LEDS is not set
CONFIG_USERLED=y
CONFIG_USERLED_LOWER=y
Tested the "leds" Led driver example on a Teensy 4.1.
Gregory Nutt is the copyright holder for those files and he has submitted the
SGA as a result we can migrate the licenses to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Summary:
- I noticed that automatic tests sometimes fail
- This commit fixes this issue
Impact:
- None
Testing:
- Tested with QEMU
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary:
- Add sabre-6quad:knsh to test BUILD_KERNEL with qemu
- Update README.txt to run the nuttx with qemu
Impact:
- None
Testing:
- Tested with QEMU
- NOTE: getprime crashes with undefined instruction when
compiled with gcc 10.3.x (please use 9.3.1)
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary:
- This commit adds thumb support to i.MX6
- Also, applies the same coding style to arch_elf.c
Impact:
- i.MX6 only
Testing:
- Tested with sabre-6quad:smp (QEMU, Dev board)
- Tested with sabre-6quad:netnsh (QEMU)
- Tested with sabre-6quad:netknsh (QEMU, not merged yet)
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
The LSM303AGR and LSM6DSL depend on BSD license and should be disabled by default
They can be enabled after BSD components are selected in menuconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
NET_TUN depends on BSD components
Can be enabled after developer enables the BSD_LICENSE option in the menu
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
The BSD components should not be enabled by default.
Each developer can enable non Apache components locally
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Summary:
- I noticed two issues in the previous commit
- QEMU setting is missing
- The ostest takes longer time (i.e. 6m13s)
- This commit fixes these issues
Impact:
- None
Testing:
- Tested with QEMU
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
## Summary
A lot of linker scripts were listed twice, once for unix, once for windows.
This PR cleans up the logic so they're only listed once.
## Impact
Any opportunity to use a single source of truth and reduce lines of code is a win!
## Testing
CI will test all build
State of problem:
- Some drivers that do not support write operations (does not
have write handler or ioctl do not perform any write actions)
are registered with write permissions
- Some drivers that do not support read operation (does not
have read handler or ioctl do not perform any read actions)
are registered with read permissions
- Some drivers are registered with execute permissions
Solution:
- Iterate code where register_driver() is used and change 'mode'
parameter to reflect the actual read/write operations executed
by a driver
- Remove execute permissions from 'mode' parameter
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
Summary:
- Apply the same style as sabre-6quad
Impact:
- None
- NOTE: esp32c3-devkit still remains old style because of link errors
Testing:
- Build only
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary:
- I noticed that the following error happened when loading the init
'elf_symvalue: SHN_COMMON: Re-compile with -fno-common'
- This commit fixes this issue
Impact:
- sabre-6quad only
Testings:
- Tested with sabre-6quad:netknsh (not merged yet)
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Support for the STMicroelectronics B-U585I-IOT02A development board. This
is a proof-of-concept port that demonstrates running NuttX as the
Non-Secure TrustZone domain companion to TrustedFirmware-M.
Signed-off-by: Michael Jung <mijung@gmx.net>
This commit adds board level support of PWM driver to SAME70-XPLAINED
board. The functionality is tested with two new configurations
pwm:
An example configuration with configured PWM.
pysim:
This configuration contains support for pysimCoder application and
includes ADC and PWM peripherals and Ethernet driver.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
board: nucleo-l152re: Added registering logic I2C on /dev.
squash 5 commits
board: nucleo-l152re: Add missing I2C1 GPIO definition
I2C1 not worked due to it's GPIO pin definition has been missing on board.h.
Fix it through include two pin macros on stm32l15xxx_pinmap.h(arch/arm/src/stm32/hardware) to board.h
GPIO_I2C1_SCL => PB8 (CN5 pin 10, D15)
GPIO_I2C1_SDA => PB9 (CN5 pin 9, D14)
Added board_late_initialize() function for init I2C.
board: nucleo-l152re: Added registering logic I2C on /dev.
I2C1 hasn't been registered on /dev. Fix it.
board: nucleo-l152re: Fix code style.
Update board.h
board: nucleo-l152re: Fix code style.
Variables starting with symbol '"g_*" means it is a global variable, I think this is not the case here.
Fix code style
since the related code was removed by:
commit 4d5a964f29
Author: Jiuzhu Dong <dongjiuzhu1@xiaomi.com>
Date: Tue Feb 23 18:04:13 2021 +0800
net: unify socket into file descriptor
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
We load the code into NuttX heap, which can be too far from
the usual code segments for the relocation types used by the
default "small" model to reach.
This worked around out of range relocations seen with my local app.
The image must be placed into:
boards/risc-v/mpfs/icicle/include/boot_romfsimg.h
The image is mounted by mpfs_bringup, which is run by the application
itself, or by board_late_initialize() in the case when
CONFIG_BOARD_LATE_INITIALIZE is defined, e.g. with CONFIG_BUILD_KERNEL
NOTE: THIS ONLY WORKS WHEN KERNEL RUNS IN M-MODE FOR NOW
This frees the PMP for other use, e.g. HART memory separation.
The page tables are statically allocated, 1 per level.
This feature is now behind CONFIG_MPFS_USE_MMU_AS_MPU, because
only the MPFS target supports this (others are not tested).
If the MMU is used for memory separation within a HART, the PMP must
still be configured to allow user access to the memory mapped for the
HART, because PMP *rekoves* access by default. At this point all of
the user memory as well as the kernel RAM are opened.
A more flexible solution for PMP configuration will follow.
The old implementation used the default ld.script for the kernel side
which did not obey the memory.ld limits whatsoever.
Also, provide the user space addresses from the linker script to get rid
of the pre-processor macros that define (incorrect) default values for
the user space composition.
Some of the configuration options have changed, so update this
config file accordingly.
In this example config, the following hart configuration takes
place:
hart1: 0xafb00000 (Another NuttX)
hart2: unused
hart3: 0x80200000 (u-boot and Linux kernel)
hart4: 0x80200000 (u-boot and Linux kernel)
Signed-off-by: Eero Nurkkala <eero.nurkkala@offcode.fi>
By default SAME70_QMTECH board does not have CD signal routed to
SAME70. The HW rework can be done to enable CD signal. Clarify
description of SD card connector.
Change configuration of CD pin to get auto unmount work correctly
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
There is no such section. Instead, place the object mpfs_head.o at the start of
the text.
Put mpfs_head.o directly into the arch library; there is no need to define
it separately in HEAD_ASRC.
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
iSerialNumber field in the device descriptor can be used to determining the
board when multiple boards connected to the same host. So add feature to change
serial string by board unique ID dynamically.
To use this feature, user must be implement the board_usbdev_serialstr() logic.
refs #13909
includes following parts:
add support of sparc in arch/Kconfig
add support of sparc in boards/Kconfig
add sparc dir in arch, add sparc dir in boards
add support of sparc in libs/libc/machine
modify all the coding style problem about saprc
Add the rest of the OpenSBI code to .text.sbi -section. They belong
to there. This frees up some space in the very limited eNVM.
Signed-off-by: Eero Nurkkala <eero.nurkkala@offcode.fi>
RAM is expected to start from 0x08000000, not from
0x80000000 in this case. DDR starts from 0x80000000.
Signed-off-by: Eero Nurkkala <eero.nurkkala@offcode.fi>
It’s an RP2040 based device with some interesting features:
+ small form factor (18x21.3mm)
+ 8 MByte Flash
+ RGB LED
+ Reset Button
+ USB-C
- reduced pin-header
Support in derived from: boards/arm/rp2040/raspberrypi-pico
Location: boards/arm/rp2040/pimoroni-tiny2040
This PR renames `tools/Makefile.*` to have the `.mk` extension. This PR also updates `README.md` and other files that references the other files.
Note: Skipped Makefile.host for this PR since it caused failures in CI for the sim build
By using a standard extension for Makefiles (https://www.file-extension.info/format/mk), editors will auto-format files.
This change will also improve developer ergonomics when searching for specific files
Verified locally that build still works, CI will verify more!
Polarfire Icicle board has only (128K - 256) bytes for the bootloader
in the non-volatile eNVM. This space is barely enough for running NuttX.
If OpenSBI is selected, it will be placed in DDR. This all means the
nuttx.bin file grows into gigabyte size, filling the unused space (ddr -
envm) with zeroes.
The memory layout is as follows:
MEMORY
{
ddr (rx) : ORIGIN = 0x80000000, LENGTH = 4M
envm (rx) : ORIGIN = 0x20220100, LENGTH = 128K - 256
l2lim (rwx) : ORIGIN = 0x08000000, LENGTH = 1024k
l2zerodevice (rwx) : ORIGIN = 0x0A000000, LENGTH = 512k
}
OpenSBI library is used as a separate binary, which is stored into
eMMC or SD-card. It is then loaded into its precise location in DDR.
Thus, we separate OpenSBI from NuttX and end up with two images
by utilizing the objcopy options:
--only-section=sectionpattern (-j in short)
--remove-section=sectionpattern (-R in short)
This is only valid when CONFIG_MPFS_OPENSBI is set.
Signed-off-by: Eero Nurkkala <eero.nurkkala@offcode.fi>
since VNC server is very useful even without NX:
1.Replace nxgl_coord_t with fb_coord_t
2.Replace nxgl_rect_s with fb_area_s
3.Remove nxgl_xxx function call
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Summary:
- I noticed that most of nsh commands are disabled by default
due to the recent changes for CONFIG_MM_SMALL=y in apps.
- This commit re-enables some nsh commands.
Impact:
- None
Testing:
- Tested with QEMU
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Some incompatibilities exist between the encryption block of the SPI
Flash peripheral and the algorithms of some file systems. LittleFS is
currently the only supported file system which is known to work
correctly when Flash Encryption is enabled.
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
Add a pinmap header for mpfs to be able to configure MSSIO GPIOs
This also adds Kconfigs for some different chip/package types of the PolarFire SOC
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
This fixes problems with DDR training sequence on aries m100pfs board
- Set LIBERO_SETTING_RPC_ODT_* to 6, which matches 40 ohm. Originally it was 120 ohm (2)
- Set BCLKSCLK_OFFSET value to 5, which matches icicle board setting
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
1. Fix the issue that Wi-Fi can't connect to some special routers occasionally.
2. Update Wi-Fi driver code to fix issue of failure to send pkt.
3. Replace software random with hardware random
since all NX and VNC initialization should be initiated from
user space through BOARDIOC_NX_START and BOARDIOC_VNC_START
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Update the cache settings for the Aries m100pfsevp board. This
assigns scratchpad ways for this board as well, as seen in the
commit 491ae6c.
Signed-off-by: Eero Nurkkala <eero.nurkkala@offcode.fi>
OpenSBI may be compiled as an external library. OpenSBI commit d249d65
(Dec. 11, 2021) needs to be reverted as it causes memcpy / memcmp to
end up in the wrong section. That issue has yet no known workaround.
OpenSBI may be lauched from the hart0 (e51). It will start the U-Boot
and eventually the Linux kernel on harts 1-4.
OpenSBI, once initialized properly, will trap and handle illegal
instructions (for example, CSR time) and unaligned address accesses
among other things.
Due to size size limitations for the mpfs eNVM area where the NuttX
is located, we actually set up the OpenSBI on its own section which
is in the bottom of the DDR memory. Special care must be taken so that
the kernel doesn't override the OpenSBI. For example, the Linux device
tree may reserve some space from the beginning:
opensbi_reserved: opensbi@80000000 {
reg = <0x80000000 0x200000>;
label = "opensbi-reserved";
};
The resulting nuttx.bin file is very large, but objcopy is used to
create the final binary images for the regions (eNVM and DDR) using
the nuttx elf file.
Co-authored-by: Petro Karashchenko <petro.karashchenko@gmail.com>
Signed-off-by: Eero Nurkkala <eero.nurkkala@offcode.fi>
Assign ways to L2 zerodevice. L2 zero device is used for
the scratchpad functionality. The area may be used for the
harts communicating to each other.
Signed-off-by: Eero Nurkkala <eero.nurkkala@offcode.fi>
Move MCUboot bootloader implementation to samv7 common folder. This drop
all duplicated code and unify implementation.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
This introduce common folder structre and rework scripts & tools
files. The linker scripts were reorganized to use best the current
infrastructure which uses a template to create a final samv7.ld
file based in the current SoC memories and bootloader definitions.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
After define memory sizes for samv7 it is possible unify linker scripts.
This add necessary changes to perform such operation.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
Current samv7 platform does not define SoC memories sizes. This define
both internal flash and sram memories sizes and update all defconfig
files.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
1. If CONFIG_SCHED_INSTRUMENTATION_SWITCH is enabled, then these additional interfaces are expected:
sched_note_suspend
sched_note_resume
at the same time，If CONFIG_SMP is enabled，then expected：
sched_note_cpu_pause
sched_note_cpu_paused
sched_note_cpu_resume
sched_note_cpu_resumed
2. other board if enable SCHED_INSTRUMENTATION，SCHED_INSTRUMENTATION_SWITCH to defconfig.
Summary:
- This commits adjusts the following settings for spresense
- CONFIG_FAT_MAXFNAME : 255 to 128
- CONFIG_NAME_MAX : 765 to 128
Impact:
- None
Testing:
- Tested with spresense:wifi_smp
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2.fix some files to fix compile warning
3.remove blueteeth header files, which are not used in nuttx core.
4.fix configs and add lost files
5.update defconfig, remove useless items
6.fix compile warning for nuttx phyplus
7.delete useless: ble, h4, zblue defconfig files form phyplus configure folder
8.fix file format check error on phyplus source code
9.fix phyplus kconfig param error
10.update configure file for nuttx
Set default console port to USART1. This allows easy access to serial
console by embedded debug CDC-ACM driver.
The README is updated with correct information about PB04 use once
samv71-xult can only be debugged using SWD mode. This means that it is
safe use CDC-ACM as default serial console.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
Updates defconfig for example application to take the advantage of DMA
support and Timer/counter trigger.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
we have many different hostfs implementation now, so it's better
to select the implementation explicitly, just like what we have
done for arm(FS_HOSTFS vs. ARM_SEMIHOSTING_HOSTFS).
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
src/mpfs_emmcsd.c: In function 'mpfs_board_emmcsd_init':
Error: src/mpfs_emmcsd.c:72:40: error: 'SDIO_SLOTNO' undeclared (first use in this function)
finfo("Initializing SDIO slot %d\n", SDIO_SLOTNO);
^~~~~~~~~~~
src/mpfs_emmcsd.c:72:40: note: each undeclared identifier is reported only once for each function it appears in
Error: src/mpfs_emmcsd.c:83:55: error: 'SDIO_MINOR' undeclared (first use in this function); did you mean 'SHRT_MIN'?
finfo("Bind SDIO to the MMC/SD driver, minor=%d\n", SDIO_MINOR);
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
- Add defconfig and board specific files
- Create mpfs/common for code which is shared between MPFS boards.
- Add support for GPIO driven EMMCSD mux.
- Move DDR Libero definitions from arch to boards.
Signed-off-by: Jani Paalijarvi <jani.paalijarvi@unikie.com>
Gregory Nutt has submitted the SGA
Haltian Ltd has submitted the SGA
as a result we can migrate the licenses to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
script.
These functions are strongly declared and thus will be used instead of
any other implementation. Furthermore, necessary Kconfig options are
selected to avoid building those function from NuttX's C library.
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
