Some domains have a lot of IPv6 addresses. Because of that, it is
not possible to get the IPv4 address with getaddrinfo.
This change separate IPv4 and IPv6 cache size limit to enable to
get both IP addresses.
The docker image has not been updated we currently use that one
from 22 days ago.
It seems that the error encountered is due to an incomplete download. It will probably work fine if downloaded again..
https://github.com/apache/nuttx/actions/runs/10619683045/job/29437799464#step:7:1339
28.31
28.31 gzip: stdin: unexpected end of file
28.31 tar: Unexpected EOF in archive
28.32 tar: Unexpected EOF in archive
28.32 tar: Error is not recoverable: exiting now
This commit fixes a deadlock in `esp32s3-devkit:sta_softap`
defconfig: `spin_lock_irqsave` was being used to enter a critical
section that calls `nxsem_post`. In this case, it's recommended
to use `[enter|leave]_critical_section` to avoid deadlocks when a
context switch may happen, for instance.
NuttX uses PSRAM, possibly using the APP_CPU cache MMU,
way before starting the APP_CPU in up_cpu_start().
Flushing the cache when launching the APP_CPU can cause
data corruptions on PSRAM.
Eg. mm_heap structures if the PSRAM is added to a heap.
reason:
These interfaces are used when we assign interrupt
handling of the same priority to the corresponding priority work queues.
Signed-off-by: hujun5 <hujun5@xiaomi.com>
1.work_queue a work which call work_queue again
2.work_cancel_sync the work
3.the work is just calling in workthread
4.work_queue the work again,and post the work_cancel_sync wakeup
5.the work is not canceled
Signed-off-by: dulibo1 <dulibo1@xiaomi.com>
Some USB controllers can receive or send multiple data packets then
generate one interrupt. This mechanism can reduce the number of data
copies. Extend req buf to accommodate this.
Signed-off-by: yangsong8 <yangsong8@xiaomi.com>
Trying to reduce the size of the docker image, I found files and folders to be deleted.
For now, I have commented Swift from the Dockerfile because the package is too large.
sphinx recommends myst-parser for markdown conversion:
https://www.sphinx-doc.org/en/master/usage/markdown.html
m2r2 is not supported for Python versions >= 3.12 so
we can't build Documentation for example on latest Arch Linux
by the way myst-parser detected a bad link to SECURITY.md that is now fixed
This commit ensures that RTC data is properly allocated in the RTC
segment in the linker. This fixes the reported problem about using
the legacy bootloader and RTC.
There are 2 CMake compile errors during the protected build mode. One is forget to add library for nuttx_user, another is the wrong macro used when compile wqueue.
Signed-off-by: pangzhen1 <pangzhen1@xiaomi.com>
After the number of threads exceeds the array size, it will not be displayed.
Any number of threads can be displayed using dynamic adaptation
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
This PR configures the BL808 MMU to cache the the User Text, Data and Heap. We enable the T-Head MMU Flags for Shareable, Bufferable and Cacheable, as explained in the previous PR: https://github.com/apache/nuttx/pull/13199
This PR fixes the Slow Memory Access for NuttX Apps on Ox64 BL808 SBC: https://github.com/apache/nuttx/issues/12696. With this fix, Ox64 NuttX CoreMark jumps from 19 to 1,104. (Close to Buildroot Linux CoreMark)
Modified Files:
`arch/risc-v/Kconfig`: Enabled `ARCH_MMU_EXT_THEAD` for BL808 SoC.
In protected build mode, the syscall returns without setting correct value for the CONTROL register, which causes the userspace threads working in privileged mode after syscall.
Signed-off-by: pangzhen1 <pangzhen1@xiaomi.com>
* Fix nxstyle check so it does not report error on comments on the same
line as if statements
* Rework if statement checks
* Report warning instead of error for is statements check fail
This PR configures the T-Head MMU to cache the the User Text, Data and Heap. We enable the MMU Flags for Shareable, Bufferable and Cacheable, as explained in this article: https://lupyuen.github.io/articles/plic3#appendix-mmu-caching-for-t-head-c906
This PR fixes the Slow Memory Access for NuttX Apps on BL808 and SG2000 SoCs: https://github.com/apache/nuttx/issues/12696. With this fix, SG2000 NuttX CoreMark jumps from 21 to 2,423. (Close to SG2000 Debian CoreMark)
We introduce a Kconfig Option: `ARCH_MMU_EXT_THEAD` ("System Type > Enable T-Head MMU extension support"). Enabling this Kconfig Option will configure the T-Head MMU to cache the User Text, Data and Heap.
This PR enables the MMU cache for only SG2000 SoC (Milk-V Duo S SBC). The next PR will apply the same settings to BL808 SoC (Pine64 Ox64 SBC).
Modified Files:
`arch/risc-v/Kconfig`: Added Kconfig Option `ARCH_MMU_EXT_THEAD` that will configure the T-Head MMU. Enabled `ARCH_MMU_EXT_THEAD` for SG2000 SoC.
`arch/risc-v/src/common/riscv_mmu.h`: Set the T-Head MMU Flags (Shareable, Bufferable and Cacheable) for User Text, Data and Heap, if `ARCH_MMU_EXT_THEAD` is enabled
`arch/risc-v/src/common/riscv_addrenv.c`: Extended the MMU Flags from 32 bits to 64 bits, to accommodate the T-Head MMU Flags
`arch/risc-v/src/common/riscv_exception.c`: Extended the MMU Flags from 32 bits to 64 bit, to accommodate the T-Head MMU Flags. This code is enabled only for MMU Paging (`CONFIG_PAGING`).
